Thermophysical properties of processed meat and poultry products

Thermophysical properties of various meat and poultry emulsions were evaluated at four temperatures (20, 40, 60 and 80 °C). Thermal conductivities (0.26–0.48 W m⁻¹ K⁻¹) increased linearly with temperature between 20 and 60 °C. Between 60 and 80 °C, it remained constant for most products except bologna. Curves for thermal conductivity as a function of temperature could be roughly grouped into two different categories: products containing meat particles and those containing meat emulsions. The application of various models was investigated for thermal conductivity prediction. It was found that a three phase structural based Kirscher model had the potential for predicting thermal conductivities with acceptable accuracy. Densities decreased slightly as a function of temperature from 20 to 40 °C. A transition phase was observed from 40 to 60 °C, which was followed by a decrease from 60 to 80 °C. There was a decrease of about 50 kg m⁻³ between the density of a raw product at room temperature (at maximum 1070 kg m⁻³) and the product heated to 80 °C (at minimum 970 kg m⁻³), due to the gelation or setting of the structure. After a transition period from 10 to 30 °C, the heat capacity increased linearly from 30 to 80 °C, and ranged from 2850 to 3380 J kg⁻¹ °C⁻¹, respectively. Densities and heat capacities were strongly influenced by the carbohydrate content (i.e. as the carbohydrate content increased the density decreased). The salt content adversely affected thermal conductivity and thermal diffusivity values. However, these parameters increased with moisture content.     

The effects of spray and blast-chilling on carcass shrinkage and pork muscle quality

Combinations of blast- and spray-chilling of pork carcasses were compared to spray-chilling at conventional chilling temperatures with regard to carcass shrinkage during chilling and pork muscle quality. In experiment 1, pork sides were spray-chilled at 1°C for the first 10 h (40 spray cycles of 60-s duration every 15 min) of cooling or blast-chilled at −20°C for 1, 2 or 3 h followed by spray-chilling for 9, 8 or 7 h duration, respectively. All pork sides were then chilled to 24 h post mortem at 1°C. Experiment 2 followed the same procedures as experiment 1, except that −40°C was used as the blast-chill temperature.

Carcass shrinkage was similar for all treatments in experiment 1 at 24 h ranging from 0·5–0·7 g 100 g⁻¹. Blast/spray-chilling increased the rate of chilling and reduced the rate of post-mortem pH decline in two muscles (longissimus thoracis, LT and semimembranosus, SM) compared to the combined conventional/spray-chill treatment. Carcasses that were blast-chilled for 3 h had LT muscles that were darker with a higher protein solubility, less drip loss, shorter lengths and higher shear values compared to those from carcasses in the conventional/spray-chill treatment. In experiment 2, carcasses blast-chilled for 3 h at −40°C recorded a weight gain at 24 h of 0·4 g 100 g⁻¹, compared to a weight loss in all other treatments (0·2–0·4 g 100 g⁻¹). Muscle colour was darker in both the LT and SM of carcasses blast-chilled for 3 h at −40°C compared to carcasses from the conventional/spray-chill treatment, but most other measurements of muscle quality showed an inconsistent response to chilling treatment.     

Fumigation with carbonyl sulfide: a model for the interaction of concentration, time and temperature

The new fumigant carbonyl sulfide offers an alternative to both methyl bromide and phosphine as a grain fumigant. Separate mathematical models for levels of kill, based on quantitative toxicological studies were developed for adults and eggs of the rice weevil Sitophilus oryzae (L.). These models suggest that fumigation exposure times for carbonyl sulfide will be a compromise between those of methyl bromide (typically 24 h) and phosphine (7–10 d) to achieve a very high kill of all developmental stages. S. oryzae eggs were more difficult to kill with carbonyl sulfide fumigation than the adults. At 30°C, a 25 g m⁻³ fumigation killed 99.9% of adults in less than 1 d, but took 4 d to kill the same percentage of eggs. Models were generated to describe the mortality of adults at 10, 15, 20, 25 and 30°C. From these models it is predicted that fumigation with carbonyl sulfide for 1–2 d at 30 g m⁻³ will kill 99.9% of adults. Furthermore the models illustrate that fumigations with concentrations below 10 g m⁻³ are unlikely to kill all adult S. oryzae. Significant variation was observed in the response of eggs to the fumigant over the temperature range of 10 to 30°C. Models were generated to describe the mortality of eggs at 10, 15, 20, 25 and 30°C. As the temperature was reduced below 25°C, the time taken to achieve an effective fumigation increased. Extrapolating from the models, a 25 g m⁻³ fumigation to control 99.9% of S. oryzae eggs will take 95 h (4 d) at 30°C, 77 h (3.2 d) at 25°C, 120 h (5 d) at 20°C, 174 h (7.5 d) at 15°C and about 290 h (11 d) at 10°C. The role of temperature in the time taken to kill eggs with carbonyl sulfide cannot be ignored. In order to achieve the desired level of kill of all developmental stages, the fumigation rates need to be set according to the most difficult life stage to kill, in this instance, the egg stage.     

Diflubenzuron as a grain protectant for control of Sitophilus species

Diflubenzuron, applied to wheat at low doses (0.2–0.6 mg kg⁻¹), prevents development of first generation (F1) progeny of Sitophilus oryzae and S. granarius species except those developing from a short period of oviposition (1–2 weeks) immediately after application. These F1 progeny fail to produce F2 progeny when transferred to wheat dosed with diflubenzuron, and produce very few progeny when transferred to untreated wheat suggesting an effect on fertility in the adult insect. At 30°C, a dose of 0.4 mg kg⁻¹ is adequate to control S. oryzae and S. granarius, although a dose of 0.6 mg kg⁻¹ is required at 20°C. Strategies for use of diflubenzuron are discussed.     

Effects of supercritical carbon dioxide extraction conditions on yields and antioxidant activity of Chlorella pyrenoidosa extracts

Yields and antioxidant activity of Chlorella pyrenoidosa extracts obtained by supercritical carbon dioxide extraction through an orthogonal experiment (L₁₆(4⁵)) were investigated to get the best extraction conditions. The results showed that extraction pressure, temperature and modifier were the main three variables that influenced the yields of extracts. The highest yield was obtained at 32 °C, 40 MPa, 20 L h⁻¹ with dosage of modifier 1 mL ethanol g⁻¹ sample for 3 h. Moreover, increasing pressure and concentrations of modifier led to the increase of extraction yields and antioxidant activity. DPPH radical scavenging method showed that almost all the extracts had significantly higher antiradical activities varying from 29.67 ± 0.29% to 54.16 ± 4.49% comparing to -tocopherol, Trolox, and BHT as references except extracts at 32 °C, 35 MPa and 15 L h⁻¹ without modifier for 1.5 h. These results indicate that supercritical extraction is a promising alternative process for recovering compounds of high antioxidant activity from C. pyrenoidosa.     

Biologically active polyamines in pig kidneys and spleen: Content after slaughter and changes during cold storage and cooking

Polyamines putrescine, spermidine (SPD) and spermine (SPM) were determined as dansyl derivatives using an HPLC method. Distribution of SPD and SPM in pair kidneys was homogenous. The mean SPD and SPM contents in pig kidneys 24 h after slaughter were 9.39 ± 3.35 and 53.1 ± 14.0 mg kg⁻¹, respectively with no significant differences between barrows and gilts. Putrescine content was below the detection limit of 1.2 mg kg⁻¹. In kidneys stored aerobically or vacuum-packaged at 2–3 °C for 7 and 21 days, respectively, SPD and SPM decreased significantly. Stewing decreased both polyamines more extensively in kidneys processed on day-1 after slaughter than on day-7 after storage at 2–3 °C. The mean SPD and SPM in 10 spleens 24 h after slaughter were 36.7 ± 5.70 and 34.0 ± 7.64 mg kg⁻¹, respectively. Thus, both pork kidney and spleen are foods with a high level of SPM and SPD.     

A new measure of uptake: desorption of unreacted phosphine from susceptible and resistant strains of Tribolium castaneum (Herbst) (Coleoptera: Tenebrionidae)

Previous studies of phosphine (PH₃) uptake by insects have concentrated on the process as a whole (“gross uptake”), without distinguishing between absorption of the gas and oxidation to non-volatile products. The lower gross uptake by phosphine-resistant (R) strains of stored product pests has given some insights into resistance mechanism(s). In this study, a recently described method of fumigant residue analysis in grains (microwave irradiation followed by headspace gas chromatography) was adapted to measure absorbed unreacted PH₃ (“reversible uptake”) in a susceptible (S) and an R strain of the rust red flour beetle Tribolium castaneum. At a concentration of 0.9 mg l⁻¹, S insects contained 20 ng g⁻¹ after 15 min exposure, rising slowly to 50 ng g⁻¹ after 5 h. The R strain yielded 190 ng g⁻¹ after 15 min, falling to 50 ng g⁻¹ over 5 h. Falling PH₃ content corresponded with increasing mortality in the R strain, while all except the shortest exposure killed 97% or more of the S strain. Insects of either strain, killed prior to PH₃ exposure by freezing in liquid nitrogen, contained 130–140 ng g⁻¹ after 30 min, rising to 190–200 ng g⁻¹ after 5 h. Gross uptake under the same conditions was 50 μg g⁻¹ (S) and 8 μg g⁻¹ (R) after 5 h, which accords with the literature. Reversible uptake by living insects of either strain under anoxia was 40–50 ng g⁻¹ over 30 min to 2 h. By examining the time-course of reversible PH₃ uptake, a new hypothesis of phosphine action and uptake, in which PH₃ oxidation in vivo is a consequence of reactive oxygen species generation, rather than a direct cause of toxicity, is discussed.     

Physiological properties of Lactobacillus paracasei, L. danicus and L. curvatus strains isolated from Estonian semi-hard cheese

Growth and survival of Lactobacillus paracasei (six strains), L. danicus sp. nov. (four isolates, two strains) and L. curvatus (two strains) from semi-hard Estonian cheeses were comparatively studied in different environmental conditions of relevance for their growth in cheese and survival in gastric environment. Maximum specific growth rates for L. paracasei strains varied between 0.40 and 0.57 h⁻¹, and all strains were tolerant to low water activities, heating at 60 °C for 30 min and pH 3. The newly discovered genetically distinct species L. danicus was characterized by low maximum growth rates (0.26–0.38 h⁻¹) and low temperature optimum (<30 °C). It was acid and heat sensitive and inhibited at salt concentrations from 4% and water activities below 0.93. L. curvatus was characterized by the highest growth rates (0.65–0.70 h⁻¹), tolerance to high NaCl concentrations, but sensitivity to heating, bile salts and low pH. The study showed that genetically different LAB species isolated from cheese could be distinguished by simple cultivation experiments.     

Levels of heavy metals in candy packages and candies likely to be consumed by small children

Ninety two samples of child-consumed candies and candy packages were analyzed for seven heavy metals. Lead (Pb) was detected at concentrations of 110.3–6394.1 mg kg⁻¹ in ten of 92 candy packages. The directive factor of Pb contamination had originated in the lead-based ink of the outer cover. Particularly, Pb was detected at high concentrations in case of green- or yellow-colored packages. Chromium (Cr) was detected at high concentrations in cases where Pb was also detected at high concentrations, and the Cr levels ranged from 136.9 mg kg⁻¹ to 1429.3 mg kg⁻¹ in seven of the 92 candy packages. Hexavalent chromium [Cr(VI)] was detected at 87–105.0% of the total Cr in polypropylene-coated wrappers with printed outer covers. The migration of Cr(VI) increased with elution time up to 0.20 μg (cm²)⁻¹ for 30 days in basic (pH 10.0) solution; however, there were no migrations in acidic (pH 4.0) and neutral (pH 7.0) solutions. The migration of Pb increased with elution time up to 0.65 μg (cm²)⁻¹ and 0.28 μg (cm²)⁻¹ in basic (pH 10.0) and acidic (pH 4.0) solutions, respectively. However, any migration was hardly observed in neutral (pH 7.0) solution.     

Calpains from thaw rigor muscle

Pre-rigor beef M. Longissimus lumborum and diaphragma were frozen at −70 °C and thawed at different temperatures and the activities of extracted calpains and the toughness of heated meat compared with those in chilled muscle.

Fresh muscle contained about 14 μg of μ-calpain/g and was unaffected by freezing, but was reduced after thawing. Rapid thawing at 30 °C for 20 min reduced the μ-calpain to 14%. When cooked from the frozen state, extensive shortening occurred and tender meat was obtained.

By storing at −3 °C for 1 day, thaw-shortening was prevented, but tougher meat obtained. The μ-calpain decreased to 70% whilst the m-calpain was unaffected. Toughness decreased after further storage at −3 °C, as did the μ-calpain. The latter changes were similar to those during development of rigor mortis and ageing of non-shortened meat stored at 4 °C. Variation in calpain activity, rather than in sarcomere length, are likely to be the cause of toughness variation in thaw rigor muscle.     

Effect of vapors from fractionated samples of propolis on microbial and oxidation damage of rice during storage

The efficacy of vapors from polar and non-polar sub-fractions of propolis on microbial and oxidation control during rice (Oryza sativa, hinohikari var.) storage was evaluated. The sub-fractions (absolute ethanol, methylene chloride, hexane extracts: AEPEV, MCPEV and HEPEV, respectively) were infused in synthetic adsorbents and their volatiles released during storage (6 months). HEPEV, MCPEV and AEPEV treatments inhibited molding and post-inoculation bacterial colonization (1.1, 1.1, 0.9 and 1.3, 1.2, 1.1 log₁₀ cfu/g reductions, respectively) on brown rice. AEPEV treatment suppressed fat acidity damage of milled rice at 30 °C to conventional cold storage level (5 °C) and differential Gram staining of bacteria isolated after the treatment indicated a dominant Gram-positive bacterial distribution. The concentrations providing 50% inhibition of 2′,2′-diphenylpicrylhydrazyl free radical scavenging were 9.8, 3.2 and 2.8 μg/μl for hexane (HEPE), absolute ethanol (AEPE) and methylene chloride (MCPE) extracts, respectively. The oxidative degradation rate was lowest for AEPE (4.3 × 10⁻⁴ min⁻¹) and highest for HEPE (1.9 × 10⁻³ min⁻¹) in the β-carotene bleaching assay. Gas chromatograph mass spectrometry revealed that AEPE had the highest amount of caffeic acid and caffeic acid phenethyl ester. Ultimately, the volatiles from the propolis sub-fractions had varied potential in rice quality preservation.     

Migration of monomers from liquid crystalline poly(p-hydroxybenzoic acid-co-2-hydroxy-6-naphthoic acid)

Liquid-crystalline co-polyesters (e.g. a random copolyester based on p-hydroxybenzoic acid (HBA) and 2-hydroxy-6-naphthoic acid (HNA) known as Vectra A950) offer good barrier properties, but for food-contact use require overall and specific migration testing. For Vectra A950 films, the highest overall migration level obtained was 2.3 mg kg^-1 in olive oil (10 days at 40°C) well below the EC limit of 60 mg kg^-1. The highest specific migration for p-hydroxybenzoic acid was 15.2 μg dm^-2 in olive oil (2h at 175°C). For 2-hydroxy-6-naphthoic acid, the highest value obtained was 4.3 μg dm^-2 in 10% ethanol (4h at 100°C), although it was not on the EC positive and cannot yet be used for food-contact materials. At conditions considered as severe, the estimated daily intake for p-hydroxybenzoic acid was calculated as 11.9 μg/person day^-1 and for 2-hydroxy-6-naphthoic acid it was 5.3 μg/person day^-1. The results exceed the threshold of regulation of 1.5 μg/person day^-1.     

Selenium content in selected Slovenian foodstuffs and estimated daily intakes of selenium

Food is the primary source of selenium for man and, since selenium is an essential trace element, the nutritional selenium status is of importance. Data on this topic are currently lacking in Slovenia. In the present study, selenium contents of some selected foods purchased on the Slovenian market were determined and estimation of the daily dietary intake by analysing 20 diet samples collected in four Slovenian Army barracks was made. In determination of the selenium content in selected food, the highest values were found, as expected, in protein-rich food such as fish, meat and eggs (33–686 ng g⁻¹), but lower values in milk and dairy products (12–30 ng g⁻¹) and vegetables and fruits (0.3–77 ng g⁻¹). Analysis of 20 military total daily diet samples, gave an average selenium daily intake of 87 μg.     

The effect of ractopamine on myofibre distribution and morphology and their relation to meat quality in swine

One hundred and twenty-eight purebred Lacombe pigs (equal number of barrows and gilts) were assigned to one of four treatments at 64 kg and fed a commercial grower-finisher diet ad libitum to which ractopamine (RAC) was incorporated (0, 10, 15 or 20 mg kg⁻¹). Pigs were slaughtered at 100 kg. Histological samples were collected from the semimembranosus (SM) and the psoas major (PM) muscles from the 0 and 20 mg kg⁻¹ RAC groups. Meat quality and muscle composition data were collected for all pigs. A significant 3-way interaction for muscle weight involving treatment, muscle and gender (P = 0·01) indicated that for the SM, gilts appeared to respond to RAC at a lower level of incorporation (10 mg kg⁻¹) than barrows. Despite these differences in response at the gross muscle level, responses were similar at the cellular level for both muscles. The proportion of red fibres did not change (P = 0·21), the proportion of intermediate fibres decreased (P = 0·01) and the proportion of white muscle fibres increased (P = 0·02) in the mg kg⁻¹ RAC group compared to the controls. In addition, when compared to controls, average fibre diameters in the 20 mg kg⁻¹ RAC group remained constant in the red fibres, and increased significantly in both the intermediate and white fibres (P = 0·01 and 0·02, respectively). Over both muscles Kramer Press values were significantly higher (P = 0·030 in the RAC-fed pigs than in the controls. Incorporation of RAC into the diet did not result in any changes to crude protein or total and soluble hydroxyproline levels. Crude fat tended to increase in the 15 mg kg⁻¹ RAC treatment in the SM and decreased in the 20 mg kg⁻¹ RAC treatment in the PM. The shift in fibre type, and the associated changes in fibre size, may contribute to the increased shear values found in RAC-fed pigs.     

Metals and organochlorine compounds in eel (Anguilla anguilla) from the Lesina lagoon, Adriatic Sea (Italy)

The muscle tissue of eels was analysed for metals (Hg, Cd, Cu and Zn), polychlorinated biphenyls (PCBs) and organochlorine pesticides (DDTs) to ascertain whether the concentrations exceeded the maximum levels fixed by the European Commission. Zinc showed the highest concentrations (mean: 20.2 μg g⁻¹ wet wt), followed by copper (mean: 0.58 μg g⁻¹ wet wt), mercury (mean: 0.18 μg g⁻¹ wet wt) and cadmium (mean: 0.03 μg g⁻¹ wet wt). None of the fish samples analysed presented metal concentrations exceeding the proposed limits. Among the organochlorine pesticides, only p,p′-DDE and p,p′-DDT were found with mean values of 19.2 and 3.0 ng g⁻¹ wet wt, respectively, while mean concentrations of PCBs were 94.0 ng g⁻¹ wet wt. With regard to DDT and its metabolites the concentrations were well below the maximum residue limit (MRL), while the mean PCB concentrations, calculated as the sum of the seven “target” congeners indicated by the European Union, exceeded the established limit. From an ecotoxicological point of view, the concentrations of metals and organochlorine compounds reflect a comparatively clean and pollution-free environment. These concentrations may be, thus, considered as useful background levels to which to refer for comparison within the Adriatic Sea.     

Efficacy of the insect growth regulators methoprene, fenoxycarb and diflubenzuron against Rhyzopertha dominica (F.) (Coleoptera: Bostrichidae) on maize and paddy rice

The activity of fresh deposits of methoprene, fenoxycarb and diflubenzuron against F₁ progeny of Rhyzopertha dominica on maize and paddy was compared with that on wheat, at two equilibrium relative humidities. There were differences between slopes of log concentration-probit (lc-p) lines for different compounds, and for the same compound on different grains. Judging by values of the IC_99.9, i.e. the concentration which inhibited progeny production by 99.9%, the order of activity against F₁ progeny on different grains was: methoprene, wheat and paddy > maize; fenoxycarb, wheat > paddy > maize; diflubenzuron, wheat and maize > paddy. Equilibrium relative humidity (e.r.h.) had no consistent effect on activity—at 90% e.r.h., the IC₅₀ of fenoxycarb on wheat was reduced and the IC₅₀ of diflubenzuron on maize was increased compared with 70% e.r.h., and other treatments were unaffected.

The efficacy of these compounds on maize and paddy against F₁ and F₂ progeny was evaluated during 48 weeks storage at 30°C, 70% r.h. The resolved S isomer of methoprene was also included. Slopes of lc-p lines were greater against the F₂ than against the F₁, particularly using diflubenzuron on paddy, with corresponding smaller values of the IC_99.9. Equally effective concentrations did not decline systematically over 48 weeks. Minimum effective application rates were judged as the concentrations that prevented living F₂ progeny in at least 2 of 3 replicates. Estimates for 48 weeks protection on maize were: methoprene, 2 mg kg⁻¹; S-methoprene, 1 mg kg⁻¹; fenoxycarb, 10 mg kg⁻¹; and diflubenzuron, 5 mg kg⁻¹. Corresponding estimates on paddy were 0.15 mg kg⁻¹, 0.05 mg kg⁻¹, 5 mg kg⁻¹, and 5 mg kg⁻¹.     

The effect of air temperature, velocity and visual lean (VL) composition on the tempering times of frozen boneless beef blocks

Beef blocks of two compositions, 100% and 50% visual lean (VL), in standard commercial packaging with nominal dimensions of 510 × 390 × 150 mm were tempered from −18 °C to −3 °C using air at temperatures from 3 °C to −3 °C and velocities of 0.5 and 5 ms⁻¹. These conditions were then modelled using a finite difference mathematical model and the accuracy of the model assessed by comparison with the experimental results. An extended range of conditions (including an intermediate air velocity of 2 ms⁻¹ and an intermediate composition of 75% VL) was then modelled to produce data that can be used to design tempering processes.

The results show that single stage air tempering of even single blocks within their cartons needs to be a long process. In air at 3 °C and 5 ms⁻¹, blocks of 50% VL rose to deep temperatures of −10 °C and −3 °C after 4.0 and 22.5 h, respectively, while with 100% VL 4.6 and 27.3 h were required. Under these conditions, the surface layers of the meat would have spent many hours in a thawed condition that would be detrimental to both drip and optimal processing. Using lower temperatures avoids thawing and at the same time produces an optimum temperature difference for subsequent processing. However, tempering times are substantially extended. For example, times to the above temperatures using air at −1 °C and 5 ms⁻¹ were 4.8 and 37.5 h for 50% VL and 5.1 and 44.5 h for 100% VL.     

Residue formation of fumonisin B1 in porcine tissues

The residues derived from the uptake of fumonisin B1, a toxic metabolite of Fusarium verticillioides frequently occurring in corn and corn products, were determined in growing pigs. After oral administration of 100 mg FB₁/animal/day for 5-11 days, serum, bile, lung, liver, kidney, brain, spleen, pancreas, heart, muscle, eye, and fat samples were collected immediately and analysed by LC-MS. The highest values were measured in kidney (833 ±1329 μg kg^-1, mean ±SD), liver (231 ±163 μg kg^-1), lung (170 ±311 μg kg^-1) and spleen (854 ±2212 μg kg^-1). Muscle contained 26 ±41 μg kg^-1, while in fat only 2 ±3 μg kg^-1 were traceable. Despite the potential accumulation over extended feeding periods as well as the large variations in the residue formation of FB₁, a carry-over in edible tissues from swine was considered not to be of toxicological relevance.     

The effect of nutritional supplements on growth rate, stress responsiveness, muscle glycogen and meat tenderness in pastoral lambs

Nutritional supplements and a magnesium bolus and were used in lambs in a 2×2 factorial design to investigate the effect on growth, preslaughter stress measurements, muscle glycogen, and meat quality. In total, 64 Perendale lambs were used (32.7±0.53 kg, mean±SEM). Feed supplemented animals received 150 g feed pellets day⁻¹ in addition to pasture grazing, and this increased growth from 183 to 207 g day⁻¹. Mean delivery of Mg from the boluses was 0.17 g day⁻¹ for 28 days, with no effect on growth rates, or any other of the variables measured. Urinary noradrenaline, adrenaline and cortisol did not differ between groups in the immediate pre-slaughter period. The meat ultimate pH was not different between groups and had a mean range of 5.47–5.53. Muscle residual glycogen did not differ between groups and had a mean range of 42–43 mmol kg⁻¹. Finally there were no differences in shear force values at all ageing times. The final shear force value of 2.5 kg F after 72 h ageing at 15 °C was a low value representing tender meat. These studies indicate that if nutrition is adequate and stress levels are low, there are no differences in meat tenderness of pasture fed lambs compared with those having feed supplements to increase growth rate.     

A comparison of the toxicity of pirimiphos-methyl and malathion to Typhaea stercorea (L.) when applied to stored maize

The toxicity of freshly applied and aged residues of pirimiphos-methyl and malathion were assessed against adult Typhaea stercorea (L.). Maize was treated with each pesticide at doses of 2, 4, 6, and 8 mg kg⁻¹ and stored at a constant 25 °C and 70% r.h. for 12 weeks. All fresh deposits of pirimiphos-methyl produced 100% mortality as did malathion at 4, 6 and 8 mg kg⁻¹. After four weeks storage pirimiphos-methyl still gave 100% mortality at 6 and 8 mg kg⁻¹ but this dropped to 96% at 4 mg kg⁻¹ and 60% at 2 mg kg⁻¹, while mortality for malathion was less than 31% even at 8 mg kg⁻¹. After 12 weeks storage only pirimiphos-methyl gave effective control with 78% mortality at the highest dose of 8 mg kg⁻¹, while control by malathion had completely broken down. The effect of exposure time on T. stercorea for both pesticides at a single dose of 4 mg kg⁻¹ was also assessed. Beetles were left in contact with treated maize for 2, 4, 6, 8 and 10 d. Fresh and four-week-old pirimiphos-methyl residues produced over 98% mortality at all exposure periods but on 12-week-old residues mortality had dropped and was only 61% following 10 d exposure. Only freshly applied malathion gave 100% mortality and even the maximum exposure of 10 d only produced 51% mortality of T. stercorea at four weeks and 39% at 12 weeks.