Development of Polysaccharide-Based Colon Targeted Drug Delivery Systems for the Treatment of Amoebiasis

ABSTRACT

The main focus of this study is to develop colon targeted drug delivery systems for metronidazole (MTZ). Tablets were prepared using various polysaccharides or indigenously developed graft copolymer of methacrylic acid with guar gum (GG) as a carrier. Various polysaccharides such as GG, xanthan gum, pectin, carrageenan, β-cyclodextrin (CD) or methacrylic acid-g-guar (MAA-g-GG) gum have been selected and evaluated. The prepared tablets were tested in vitro for their suitability as colon-specific drug delivery systems. To further improve the colon specificity, some selected tablet formulations were enteric coated with Eudragit-L 100 to give protection in an acidic environment. Drug release studies were performed in simulated gastric fluid (SGF) for 2 hr followed by simulated intestinal fluid (SIF) at pH 7.4. The dissolution data demonstrate that the rate of drug release is dependent upon the nature and concentration of polysaccharide/polymer used in the formulations. Uncoated tablets containing xanthan gum or mixture of xanthan gum with graft copolymer showed 30–40% drug release during the initial 4–5 hr, whereas for tablets containing GG with the graft copolymer, it was 70%. After enteric coating, the release was drastically reduced to 18–24%. The other polysaccharides were unable to protect drug release under similar conditions. Preparations with xanthan gum as a matrix showed the time-dependent release behavior. Further, in vitro release was performed in the dissolution media with rat caecal contents. Results indicated an enhanced release when compared to formulations studied in dissolution media without rat caecal contents, because of microbial degradation or polymer solubilization. The nature of drug transport was found to be non-Fickian in case of uncoated formulations, whereas for the coated formulations, it was found to be super-Case-II. Statistical analyses of release data indicated that MTZ release is significantly affected by the nature of the polysaccharide used and enteric coating of the tablet. Differential scanning calorimetry indicated the presence of crystalline nature of drug in the formulations.     

Development of ocular drug delivery systems using molecularly imprinted soft contact lenses

Recently, significant advances have been made in order to optimize drug delivery to ocular tissues. The main problems in ocular drug delivery are poor bioavailability and uncontrollable drug delivery of conventional ophthalmic preparations (e.g. eye drops). Hydrogels have been investigated since 1965 as new ocular drug delivery systems. Increase of hydrogel loading capacity, optimization of drug residence time on the ocular surface and biocompatibility with the eye tissue has been the main focus of previous studies. Molecular imprinting technology provided the opportunity to fulfill the above-mentioned objectives. Molecularly imprinted soft contact lenses (SCLs) have high potentials as novel drug delivery systems for the treatment of eye disorders. This technique is used for the preparation of polymers with specific binding sites for a template molecule. Previous studies indicated that molecular imprinting technology could be successfully applied for the preparation of SCLs as ocular drug delivery systems. Previous research, particularly in vivo studies, demonstrated that molecular imprinting is a versatile and effective method in optimizing the drug release behavior and enhancing the loading capacity of SCLs as new ocular drug delivery systems. This review highlights various potentials of molecularly imprinted contact lenses in enhancing the drug-loading capacity and controlling the drug release, compared to other ocular drug delivery systems. We have also studied the effects of contributing factors such as the type of comonomer, template/functional monomer molar ratio, crosslinker concentration in drug-loading capacity, and the release properties of molecularly imprinted hydrogels.     

Polysaccharide matrices for microbially triggered drug delivery to the colon

Matrix tablets were prepared using xanthan gum (XG) and guar gum (GG) in varying proportions, and the suitability of the prepared tablets was evaluated for colon specific drug delivery. Indomethacin was used as a model drug. The ability of the prepared matrices to retard drug release in the upper gastrointestinal tract (GIT) and to undergo enzymatic hydrolysis by the colonic bacteria was evaluated. For this, drug release studies were carried out in the presence of rat cecal content. Further cecal content of rats with induced enzymatic activity were used. To ascertain the role of bacterial flora in carrying out the hydrolysis of the tablet, cecal content of rats treated with antibiotics were used in the dissolution media. Presence of XG in combination with GG in the tablets could retard drug release in the conditions of the upper GIT. However, the presence of GG and starch made these matrices microbially degradable. Guar gum alone as a drug release-retarding excipient in the matrices does not achieve the desired retardation. Presence of XG in the tablets not only retards the initial drug release from the tablets, but due to high swelling, makes them more vulnerable to digestion by the microbial enzymes in the colon.     

In vitro evaluation of idebenone-loaded solid lipid nanoparticles for drug delivery to the brain

Context: Solid lipid nanoparticles (SLN) are regarded as interesting drug delivery systems and their preparation techniques have gained a great deal of attention.

Objective: To evaluate the feasibility of preparing idebenone (IDE) loaded SLN from O/W microemulsions by the phase-inversion temperature (PIT) method. Since SLN have been proposed to improve drug delivery to the brain, IDE was chosen as model drug due to its activity in the treatment of neurodegenerative diseases.

Materials and Methods: Cetyl palmitate was used as solid lipid to prepare SLN containing two surfactant/cosurfactant mixtures, isoceteth-20/glyceryl oleate (SLN A) and ceteth-20/glyceryl oleate (SLN B) by the PIT method.

Results and discussion: All the formulations tested showed a mean particle diameter ranging from 30 to 95?nm and a single peak in size distribution. Stability tests showed that SLN B were more stable than SLN A. IDE release was dependent both on the type of primary surfactant used and the amount of loaded drug. IDE-loaded SLN were effective in inhibiting 2,2′-azobis-(2-amidinopropane)dihydrochloride (APPH)-induced lactic dehydrogenase (LDH) release and reactive oxygen species (ROS) production in primary cultures of astrocytes obtained from rat cerebral cortex. It is noteworthy that SLN B2 (containing ceteth-20 as primary surfactant and 0.7% w/w IDE) were able to prevent entirely both the LDH release and ROS production induced by APPH.

Conclusion: The PIT method provided SLN with good technological properties. The tested SLN could be regarded as interesting carriers to overcome the blood brain barrier and increase the efficacy of the loaded drug.     

Design of polymeric nanoparticles and its applications as drug delivery systems for acne treatment

Objective: The aim of this study was to evaluate a formulation made of poly(lactide-co-glycolide) (PLGA) nanoparticles containing azelaic acid for potential acne treatment.

Methods: Azelaic acid-loaded PLGA nanoparticles were prepared by spontaneous emulsification processes using poloxamer 188 as stabilizer. Several manufacturing parameters such as stirring rate, concentration of stabilizer and different recovery methods were investigated. Nanoparticles were evaluated in terms of size, zeta potential, encapsulation efficiency, release kinetics and permeation kinetics in vitro. Furthermore, in vitro toxicological studies were performed in Saccharomyces cerevisiae model.

Results: The results showed that by adjusting some formulation conditions it was possible to obtain nanoparticles with high loading and a controlled drug release. Freeze-dried recovery altered the nanoparticles structure by enhancing porous structures and mannitol was required to control the mean particle size. The centrifugation recovery was found to be the best approach to nanoparticles recovery. Similar toxicity profiles were observed for both drug-free and azelaic acid-loaded nanoparticles, with concentration-dependent decreases in cell viability.

Conclusion: These results indicate a potential formulation for controlled release delivery of azelaic acid to the follicular unit.     

Development of self-microemulsifying drug delivery system for oral bioavailability enhancement of berberine hydrochloride

The purpose of this study was to develop a self-microemulsifying drug delivery system (SMEDDS) to improve the oral bioavailability of Berberine hydrochloride (BBH), an important bioactive compound from Chinese Medicines with poor water solubility. Pseudoternary phase diagrams were constructed using oil, surfactant and co-surfactant types to identify the efficient self-microemulsification region. SMEDDS was characterized by morphological observation, droplet size, zeta-potential determination, stability, in vitro release and in vivo bioavailability study. The optimal formulation with the best self-microemulsifying and solubilization ability consisted of 40% (w/w) of ethyl linoleate and oleic acid (2:1), 35% (w/w) Tween-80 and 25% (w/w) glycerol. The SMEDDS of BBH could exhibit good stability. In vitro release test showed a complete release of BBH from SMEDDS was in 5 h. In vivo results indicated that the peak plasma concentration (C_max) and the area under the curve (AUC_{0→12 h}) of SMEDDS of BBH were higher than the commercial tablet by 163.4% and 154.2%, respectively. The relative bioavailability of SMEDDS of BBH was enhanced about 2.42-fold compared with the commercial tablet in rats. The study confirmed that the SMEDDS formulation could be used as a possible alternative to traditional oral formulations of BBH to improve its bioavailability.     

Cargo-towing fuel-free magnetic nanoswimmers for targeted drug delivery

Fuel-free nanomotors are essential for future in-vivo biomedical transport and drug-delivery applications. Herein, the first example of directed delivery of drug-loaded magnetic polymeric particles using magnetically driven flexible nanoswimmers is described. It is demonstrated that flexible magnetic nickel-silver nanoswimmers (5-6 μm in length and 200 nm in diameter) are able to transport micrometer particles at high speeds of more than 10 μm s(-1) (more than 0.2 body lengths per revolution in dimensionless speed). The fundamental mechanism of the cargo-towing ability of these magnetic (fuel-free) nanowire motors is modelled, and the hydrodynamic features of these cargo-loaded motors discussed. The effect of the cargo size on swimming performance is evaluated experimentally and compared to a theoretical model, emphasizing the interplay between hydrodynamic drag forces and boundary actuation. The latter leads to an unusual increase of the propulsion speed at an intermediate particle size. Potential applications of these cargo-towing nanoswimmers are demonstrated by using the directed delivery of drug-loaded microparticles to HeLa cancer cells in biological media. Transport of the drug carriers through a microchannel from the pick-up zone to the release microwell is further illustrated. It is expected that magnetically driven nanoswimmers will provide a new approach for the rapid delivery of target-specific drug carriers to predetermined destinations.     

Damar Batu as a novel matrix former for the transdermal drug delivery: in vitro evaluation

Purpose: Damar Batu (DB) is a novel film-forming biomaterial obtained from Shorea species, evaluated in this study for its potential application in transdermal drug delivery system. Methods: DB was characterized initially in terms of acid value, softening point, molecular weight (M_w), polydispersity index (M_w/M_n), and glass transition temperature (T_g). Neat, plasticized films of DB were investigated for mechanical properties. The biomaterial was further investigated as a matrix-forming agent for transdermal drug delivery system. Developed matrix-type transdermal patches were evaluated for thickness and weight uniformity, folding endurance, drug content, in vitro drug release study, and skin permeation study. Results: On the basis of in vitro drug release and in vitro skin permeation performance, formulation containing DB/Eudragit RL100 (60 : 40) was found to be better than other formulations and was selected as the optimized formulation. IR analysis of physical mixture of drug and polymer and thin layer chromatography study exhibited compatibility between drug and polymer. Conclusion: From the outcome of this study, it can be concluded that applying suitable adhesive layer and backing membrane-developed DB/ERL100, transdermal patches can be of potential therapeutic use.     

Controllable coating of microneedles for transdermal drug delivery

Coated microneedles have been paid much attention recently, and several coating strategies have been developed to address the problems during coating process. However, there are still some unresolved issues, such as, precise control requirements, microneedle substrate contamination and high processing temperature. The purpose of this study was to develop a simple and controllable method to make uniform coatings on microneedles at room temperature. This novel method avoids the contamination of microneedle substrate by providing both the adsorption force of thickener and micro-scale coating film produced by a newly design device. Thickeners were screened to enhance the mass of coatings. The parameters that influence the coatings were tested systematically, which made coating process controllable. Finally, three model drugs were coated onto microneedles to prove the method is applicable more broadly. In addition, insertion experiments were carried out to test the drug delivery feasibility of the coated microneedles. In conclusion, this study presents a simple and controllable method to coat microneedles with small molecular chemical drugs or large proteins for rapid skin drug delivery.     

The structure and properties of materials used in advanced drug delivery systems

The various requirements placed on materials that might serve as suitable components in drug delivery systems are discussed. Special attention is paid to the interactions between the drug delivery constructs and the biological environment, using the interactions in the vascular compartment of the body as an example. Two alternative general approaches are compared: (a) “controlled drug release”, which aims to reduce or eliminate side effects by producing a steady therapeutic concentration of drug in the body; (b) “site-selective drug delivery”, which aims to ensure that the drug is delivered to the site of its biochemical and disease-related site of action, at the same time maintaining the drug inactive elsewhere in the body. It is concluded that materials for delivering drugs to selected sites of disease within the body must be designed to utilise the unique features (structure, function, rhythm) of the main elements involved in the disease. Equally important is to design drug carriers that do not interact non-specifically within the body so that their specific action would be prevented. It is difficult to see how this could be achieved using materials entirely “foreign” to the body. Utilising the primary structures used by the biological systems (proteins, glycoproteins, carbohydrates) and creating novel higher structures (secondary, tertiary, quartenary) that mimic the native material is the logical way forward in the search for new drug delivery systems, and we need to turn more and more to the molecular basis of biology for guidance and inspiration.     

Development and gamma-scintigraphy study of Hibiscus rosasinensis polysaccharide-based microspheres for nasal drug delivery

Objective: This work describes the application of natural plant polysaccharide as pharmaceutical mucoadhesive excipients in delivery systems to reduce the clearance rate through nasal cavity.

Methods: Novel natural polysaccharide (Hibiscus rosasinensis)-based mucoadhesive microspheres were prepared by using emulsion crosslinking method for the delivery of rizatriptan benzoate (RB) through nasal route. Mucoadhesive microspheres were characterized for different parameters and nasal clearance of technetium-99m (^99mTc)-radiolabeled microspheres was determined by using gamma-scintigraphy.

Results: Their Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) studies showed that the drug was stable during preparation of microspheres. Aerodynamic diameter of microspheres was in the range 13.23?±?1.83–33.57?±?3.69?µm. Change in drug and polysaccharide ratio influenced the mucoadhesion, encapsulation efficiency and in-vitro release property. Scintigraphs taken at regular interval indicate that control solution was cleared rapidly from nasal cavity, whereas microspheres showed slower clearance (p?Conclusion: Natural polysaccharide-based microspheres achieved extended residence by minimizing effect of mucociliary clearance with opportunity of sustained delivery for longer duration.     

Controlled drug delivery systems based on thiolated chitosan microspheres

The aim of the present study was to verify the potential of chitosan-thio-butyl-amidine (TBA) microspheres as carrier systems for controlled drug delivery. In this study microspheres were prepared utilizing water in oil (w/o) emulsification solvent evaporation technique. A concentration of 0.5% of chitosan-TBA conjugate displaying 100 µM thiol groups per gram polymer was used in the aqueous phase of the emulsion in order to prepare microspheres. The obtained non-aggregated free-flowing microspheres were examined with conventional light microscope as well as scanning electron microscopy (SEM). The microscopic images indicated that the prepared chitosan-TBA microspheres were of spherical shape and smooth surface while microparticles obtained from the unmodified chitosan were of porous structure and non-spherical shape. Particle size distribution was determined to be in the range from 1 to 59 µm. The free thiol group content of chitosan-TBA microspheres prepared with an aqueous phase of pH 2, 5, and 6.5 were determined to be 71.4, 49.4, and 8.2 µM/g polymer, respectively. Furthermore, results attained from in vitro release studies with fluorescein isothiocyanate labelled dextran (FITC-dextran) loaded chitosan-TBA microspheres showed a controlled release rate for more than three hours while the control reached the maximum peak level of release already within an hour. According to these results, chitosan-TBA microspheres seem to be a promising tool in transmucosal drug delivery for poorly absorbed therapeutic agents.     

Preparation and characterization of PEG-modified polyurethane pressure-sensitive adhesives for transdermal drug delivery

Background: The purpose of this work was to develop novel pressure-sensitive adhesives (PSAs) for transdermal drug-delivery systems (TDDS) with proper adhesive properties, hydrophilicity, biocompatibility and high drug loading. Method: Polyethyleneglycol-modified polyurethane PSAs (PEG-PU-PSAs) were synthesized by prepolymerization method with PEG-modified co-polyether and hexamethylene diisocyanate. The effects of reaction temperature, catalyst, ratios of NCO/OH, co-polyether composition, and chain extender were investigated. Drug loading was studied by using thiamazole (hydrophilic drug), diclofenac sodium (slightly hydrophilic drug), and ibuprofen (lipophilic drug) as model drugs. In vitro drug-release kinetics obtained with Franz diffusion cell and dialysis membrane. Results: The results showed that when reaction temperature at 80°C, weight percentage of stannous octoate as catalyst at 0.05%, ratio of NCO/OH at 2.0–2.2, ratio of PEG/polypropylene glycol (PPG)/polytetramethylene ether glycol (PTMG) at 30/25–30/50–55, and weight percentage of glycol as chain extender at 4.5%, PEGPU-PSAs synthesized performed well on adhesive properties. Actually, PEG on the main chain of the PU could improve the hydrophilicity of PSAs, whereas PPG and PTMG could offer proper adhesive properties. Skin compatibility test on volunteers indicated that PEG-PU-PSAs would not cause any skin irritations. All the model drugs had excellent stabilizations in PEG-PU-PSAs. In vitro drug-release kinetics demonstrated that the drug release depended on drug-loading level and solubility of the drug. Conclusion: These experimental results indicated that PEG-PU-PSAs have good potential for applications in TDDS.     

Basic coating polymers for the colon-specific drug delivery in inflammatory bowel disease

During acute attacks of inflammatory bowel disease, the luminal pH of the colon decreases significantly. This drop in pH can be exploited by developing coated dosage forms with acid-soluble coating polymers to achieve topical drug delivery to the colon. Two batches of minitablets, a conventional and a swellable formulation, were prepared by direct compression and coated with different amounts of either Eudragit® E or AEA® in a small coating pan. The release of the model drug dexamethasone from the coated tablets was measured spectrophotometrically at pH 2.0, 4.0, 5.0, and 6.8 and different stirring rates (100-200 rpm) to simulate the influence of pH and hydrodynamic stress on drug release. In general, lag times of drug release, determined as the time points of a 5% drug release, were longer with AEA-coated cores compared to those coated with Eudragit E, resulting from a lower polymer dissolution rate and water permeability of this film. In low pH media, drug release was dependent on the stirring rate because the onset of drug release is determined by the time required for dissolution of the basic polymer films. At pH 6.8, lag times from nonswelling tablets coated with Eudragit E, for which drug release only begins after complete erosion of the polymer film, are not significantly affected by hydrodynamic stress. Drug release from AEA-coated cores is determined by the slow drug diffusion through the polymer film. Lag times from tablets with swelling properties, for which drug release is induced by disruption of the basic polymer films due to water penetration and subsequent core swelling, are not significantly affected by hydrodynamic stress. Additional coating layers such as an intermediate hydroxypropylcellulose (HPC) layer and an enteric outer layer do not influence the lag times of drug release, nor does a 2-hr pretreatment of the entire dosage form in acidic media.     

Efficient delivery of antitumor drug to the nuclei of tumor cells by amphiphilic biodegradable poly(L-aspartic acid-co-lactic acid)/DPPE co-polymer nanoparticles

The use of biodegradable polymeric nanoparticles (NPs) for controlled drug delivery has shown significant therapeutic potential. Polyaspartic acid and polylactic acid are the most intensively studied biodegradable polymers. In the present study, novel amphiphilic biodegradable co-polymer NPs, poly(L-aspartic acid-co-lactic acid) with 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine (DPPE) (poly(AA-co-LA)/DPPE) is synthesized and subsequently used to encapsulate an antitumor drug doxorubicin (DOX). The formulation parameters of the NPs are optimized to improve encapsulation efficiency. The resulting drug-loaded NPs possess better size homogeneity (polydispersity) and exhibit pH-responsive drug release profiles. Cellular viability assays indicate that the poly(AA-co-LA)/DPPE NPs did not induce cell death, whereas doxorubicin encapsulated NPs were cytotoxic to various types of tumor cells. In addition, the free NPs could not enter the cell nuclei after internalized in tumor cells. The DOX-loaded NPs exhibit efficient intracellular delivery in tumor cells with co-localization in lysosome and delay entering into the nucleus, which suggests a time- and pH-dependent drug release profile within cells. When applied to deliver chemotherapeutics to a mouse xenograft model of human lung adenocarcinoma, DOX-loaded NPs have a comparable antitumor activity with free DOX, and greatly reduce systemic toxicity and mortality. The delivery of cytotoxic drugs directly to the nucleus specifically within tumor cells is of great interest. These results demonstrate the feasibility of the application of the amphiphilic polyaspartic acid derivative, poly(AA-co-LA)/DPPE, as a nanocarrier for cell nuclear delivery of potent antitumor drugs.     

Development and optimization of self-nanoemulsifying drug delivery systems (SNEDDS) for curcumin transdermal delivery: an anti-inflammatory exposure

The purpose of this work is to develop novel lipid-based self-nanoemulsifying drug delivery systems (SNEDDS) as carriers for transdermal delivery of curcumin. SNEDDS containing black seed oil, medium chain mono- and diglycerides and surfactants, were prepared as curcumin delivery vehicles. Their formation spontaneity, morphology, droplet size, and drug loading were evaluated. Gel preparation containing two of the SNEDDS formulations were used in the carrageenan induced paw edema to evaluate the anti-inflammatory effect. Results showed droplet size as low as 71?nm. The highest drug loading was observed with SNEDDS-F6 of ～45?mg/g. In in-vivo investigation, SNEDDS-F6 exhibited significant anti-inflammatory activities in terms of 80% reduction in paw edema when compared with positive control. The prepared SNEDDS with the elevated entrapment efficiency, good transdermal penetration ability could be a suitable candidate for effective transdermal curcumin skin delivery.     

Preparation and characterization of novel sinomenine microcapsules for oral controlled drug delivery

Background: Developing a sustained release drug to cure arthritis is needed. Sinomenine (SIN) is abstracted from sinomenium acutum and widely used in the treatment of various rheumatism and arrhythmia with few side effects. The primary aim of this study is to develop SIN microcapsules with polyelectrolyte multilayers for controlled drug release. Method: SIN microcrystals were encapsulated with chitosan, gelatin, and alginate by layer-by-layer technique, such as (gelatin/alginate)₄ and (chitosan/alginate)₆. The size distribution, zeta-potential, stability, and morphology of the microcapsules were characterized by a particle size analyzer, zetasizer, ultraviolet spectroscopy, and transmission electron microscope, respectively. The in vitro controlled release pattern of SIN was studied using a diffusion cell assembly at physiological pH of 6.8 or 1.4. Results: Light stability of these microcapsules was improved after microencapsulation. Compared with release rate of the SIN microcapsules coated by the poly(dimethyldiallyl ammonium chloride)/alginate and gelatin/alginate multilayers, release rate of the SIN microcapsules coated with chitosan/alginate multilayers was fast. Release rate progressively decreased with the increase of chitosan/alginate bilayer number and the decrease of pH value of release medium. Conclusion: These novel SIN microcapsules may be developed into oral controlled drug delivery for rheumatism and arthritis.     

Floating modular drug delivery systems with buoyancy independent of release mechanisms to sustain amoxicillin and clarithromycin intra-gastric concentrations

Release modules of amoxicillin and clarithromycin combined in a single dosage form designed to float in the gastric content and to sustain the intra-gastric concentrations of these two antibiotics used for the eradication of Helicobacter pylori have been studied. The modules having a disc shape with curved bases were formulated as hydrophilic matrices. Two modules of clarithromycin were assembled by sticking the concave base of one module to the concave base of the other, creating an internal void chamber. The final dosage form was a floating assembly of three modules of clarithromycin and two of amoxicillin in which the drug release mechanism did not interfere with the floatation mechanism. The assembled system showed immediate in vitro floatation at pH 1.2, lasting 5?h. The in vitro antibiotics release profiles from individual modules and assembled systems exhibited linear release rate during buoyancy for at least 8?h. The predicted antibiotic concentrations in the stomach maintained for long time levels significantly higher than the respective minimum inhibitory concentrations (MIC). In addition, an in vivo absorption study performed on beagle dogs confirmed the slow release of clarithromycin and amoxicillin from the assembled system during the assembly’s permanence in the stomach for at least 4?h.     

Synthesis of biomolecule-modified mesoporous silica nanoparticles for targeted hydrophobic drug delivery to cancer cells

Synthetic methodologies integrating hydrophobic drug delivery and biomolecular targeting with mesoporous silica nanoparticles are described. Transferrin and cyclic-RGD peptides are covalently attached to the nanoparticles utilizing different techniques and provide selectivity between primary and metastatic cancer cells. The increase in cellular uptake of the targeted particles is examined using fluorescence microscopy and flow cytometry. Transferrin-modified silica nanoparticles display enhancement in particle uptake by Panc-1 cancer cells over that of normal HFF cells. The endocytotic pathway for these particles is further investigated through plasmid transfection of the transferrin receptor into the normal HFF cell line, which results in an increase in particle endocytosis as compared to unmodified HFF cells. By designing and attaching a synthetic cyclic-RGD, selectivity between primary cancer cells (BT-549) and metastatic cancer cells (MDA-MB 435) is achieved with enhanced particle uptake by the metastatic cancer cell line. Incorporation of the hydrophobic drug Camptothecin into these two types of biomolecular-targeted nanoparticles causes an increase in mortality of the targeted cancer cells compared to that caused by both the free drug and nontargeted particles. These results demonstrate successful biomolecular-targeted hydrophobic drug delivery carriers that selectively target specific cancer cells and result in enhanced drug delivery and cell mortality.     

一种用于药物释控系统的微针阵列及其制作方法的研究

 通过皮肤输送药物最大的障碍是皮肤最外层的角质层．传统的静脉注射用针只有刺透皮肤深入到深层组织内部,才能有效地输送药物,这容易引起感染和疼痛,给患者造成很大的不适．介绍了一种采用硅微加工技术制作的微针,它长度适中,既能穿透皮肤的角质层,又刺激不到深层组织的神经,实现无痛注射的目的．其加工工艺是采用硅的HNA(硝酸+氢氟酸+乙酸)腐蚀系统,是一种硅的各项同性的湿法腐蚀方法．