TiO2 and TiO2–SiO2 thin films and powders by one-step soft-solution method: Synthesis and characterizations

Simple soft-solution method has been developed to synthesize films and powders of TiO₂ and mixed TiO₂–SiO₂ at relatively low temperatures. This method is simple and inexpensive. Furthermore, reactor can be designed for large-scale applications as well as to produce large quantities of composite powders in a single step. For the preparation of TiO₂, we used aqueous acidic medium containing TiOSO₄ and H₂O₂, which results in a peroxo-titanium precursor while colloidal SiO₂ has been added to the precursor for the formation of TiO₂–SiO₂. Post annealing at 500 °C is necessary to have anatase structure. Resulting films and powders were characterized by different techniques. TiO₂ (anatase) phase with (1 0 1) preferred orientation has been obtained. Also in TiO₂–SiO₂ mixed films and powders, TiO₂ (anatase) phase was found. Fourier transform infrared spectroscopy (FTIR) results for TiO₂ and mixed TiO₂–SiO₂ films have been presented and discussed. The method developed in this paper allowed obtaining compact and homogeneous TiO₂ films. These compact films are highly photoactive when TiO₂ is used as photo anode in an photoelectrochemical cell. Nanoporous morphology is obtained when SiO₂ colloids are added into the solution.     

Electrochromic properties of heat-treated thin films of CeO2–TiO2–ZrO2 prepared by sol–gel route

CeO₂–TiO₂–ZrO₂ thin films were prepared using the sol–gel process and deposited on glass and ITO-coated glass substrates via dip-coating technique. The samples were heat treated between 100 and 500 °C. The heat treatment effects on the electrochromic performances of the films were determined by means of cyclic voltammetry measurements. The structural behavior of the film was characterized by atomic force microscopy and X-ray diffraction. Refractive index, extinction coefficient, and thickness of the films were determined in the 350–1000 nm wavelength, using nkd spectrophotometry analysis.Heat treatment temperature affects the electrochromic, optical, and structural properties of the film. The charge density of the samples increased from 8.8 to 14.8 mC/cm², with increasing heat-treatment temperatures from 100 to 500 °C. It was determined that the highest ratio between anodic and cathodic charge takes place with increase of temperature up to 500 °C.     

Sol–gel derived nanocrystalline CeO2–TiO2 coatings for electrochromic windows

Mixed CeO₂–TiO₂ coatings synthesized by sol–gel spin coating process using mixed organic–inorganic Ti(OC₃H₇)₄ and CeCl₃·7H₂O precursors with different Ce/Ti mole ratios were investigated by a wide range of characterization techniques. The attempts were directed towards achieving coatings with high transparency in the visible region and good electrochemical properties. Elucidation of the structural and optical features of the films yielded information on the aspects relevant to their usage in transmissive electrochromic devices. The films have been found to exhibit properties for counter electrode in electrochromic smart windows in which they are able to retain their transparency under charge insertion, high enough for practical uses. The high optical modulation and fastest switching for WO₃ film in the device configuration with the Ce/Ti (1:1) film is interpreted in terms of conducive microstructural changes induced by addition of TiO₂ in an amount equivalent to CeO₂.     

Photoelectrochemical and photocatalytic properties of Ag-loaded BaTiO3/TiO2 heterostructure nanotube arrays

BaTiO₃/TiO₂ (BT) heterostructure nanotube arrays were fabricated by in situ hydrothermal method using TiO₂ nanotubes as both template and reactant. Compared with pure TiO₂ nanotube arrays, the BT heterostructures exhibited enhanced photocurrent under UV light irradiation. For further improving the photoelectrochemical performance, Ag nanoparticles were loaded on the surface of BT heterostructure by two different photo-reduction (Ag/BT-P) and chemical reduction (Ag/BT-C) methods. The results showed that the Ag nanoparticles on Ag/BT-C were uniform and dispersed homogeneously, but the Ag nanoparticles on Ag/BT-P were very large, which resulted in the tailored and integrated nanotube structure destroyed. The electrochemical impedance spectra (EIS) indicated that the impedance arc radius of Ag/BT-C was much smaller than Ag/BT-P and the pure BT nanotube arrays, indicating that the enhanced charge carrier separation was achieved on Ag/BT-C. In addition, the Ag/BT-C nanotube arrays exhibited a higher photocatalytic activity for methylene blue (MB) degradation.     

Preparation and photocatalytic properties of HLaNb2O7/(Pt,TiO2) perovskite intercalated nanomaterial

A novel perovskite intercalated nanomaterial HLaNb₂O₇/(Pt, TiO₂) is fabricated by successive intercalated reaction of HLaNb₂O₇ with [Pt(NH₃)₄]Cl₂ aqueous solution, n-C₆H₁₃NH₂/C₂H₅OH organic solution and acidic TiO₂ colloid solution, followed by ultraviolet light irradiation. The gallery height and the band gap energy of HLaNb₂O₇/(Pt, TiO₂) is less than 0.6 nm and 3.14 eV, respectively. The photocatalytic activity of HLaNb₂O₇/TiO₂ is superior to that of unsupported TiO₂ and is enhanced by the co-incorporation of Pt. The photocatalytic hydrogen evolution based on HLaNb₂O₇/(Pt, TiO₂) is 240 cm³ h⁻¹ g⁻¹ using methanol as a sacrificial agent under irradiation with wavelength more than 290 nm from a 100-W mercury lamp. High photocatalytic activity of HLaNb₂O₇/(Pt, TiO₂) may be due to the host with rare earth La element and perovskite structure, the quantum size effect of intercalated semiconductor and the coupling effect between host and guest.     

Tri-layer antireflection coatings (SiO2/SiO2–TiO2/TiO2) for silicon solar cells using a sol–gel technique

Antireflection coatings (ARCs) have become one of the key issues for mass production of Si solar cells. They are generally performed by vacuum processes such as thermal evaporation, reactive sputtering, and plasma-enhanced chemical vapor deposition. In this work, a sol–gel method has been demonstrated to prepare the ARCs for the non-textured monocrystalline Si solar cells. The spin-coated TiO₂ single-layer, SiO₂/TiO₂ double-layer and SiO₂/SiO₂–TiO₂/TiO₂ triple-layer ARCs were deposited on the Si solar cells and they showed good uniformity in thickness. The measured average optical reflectance (400–1000 nm) was about 9.3, 6.2 and 3.2% for the single-layer, double-layer and triple-layer ARCs, respectively. Good correlation between theoretical and experimental data was obtained. Under a triple-layer ARC condition, a 39% improvement in the efficiency of the monocrystalline Si solar cell was achieved. These indicate that the sol–gel ARC process has high potential for low-cost solar cell fabrication.     

TiO2 thin films - Influence of annealing temperature on structural, optical and photocatalytic properties

Nanostructured TiO₂ thin films were deposited on glass substrates by sol-gel dip coating technique. The structural, morphological and optical characterizations of the as deposited and annealed films were carried out using X-ray diffraction (XRD), Raman spectroscopy, atomic force microscopy (AFM), and UV-vis transmittance spectroscopy. As-deposited films were amorphous, and the XRD studies showed that the formation of anatase phase was initiated at annealing temperature close to 400 °C. The grain size of the film annealed at 600 °C was about 20 nm. The lattice parameters for the films annealed at 600 °C were a = 3.7862 ? and c = 9.5172 ?, which is close to the reported values of anatase phase. Band gap of the as deposited film was estimated as 3.42 eV and was found to decrease with the annealing temperature. At 550 nm the refractive index of the films annealed at 600 °C was 2.11, which is low compared to a pore free anatase TiO₂. The room temperature electrical resistivity in the dark was of the order of 4.45 × 10⁶ ohm-cm. Photocatalytic activity of the TiO₂ films were studied by monitoring the degradation of aqueous methylene blue under UV light irradiation and was observed that films annealed above 400 °C had good photocatalytic activity which is explained as due to the structural and morphological properties of the films.     

Improved separation efficiency of photogenerated carriers for Fe2O3/SrTiO3 heterojunction semiconductor

To investigate the mechanisms of the improvement on separation efficiency of photogenerated carriers, a Fe₂O₃/SrTiO₃ heterojunction semiconductor with an improved separation efficiency was successfully prepared. The heterojunction semiconductor was characterized with X-ray diffraction (XRD), UV–vis absorption spectrum, scanning electron microscope (SEM) and surface photovoltage (SPV) spectroscopy. The energy band diagrams of Fe₂O₃ and SrTiO₃ were determined with X-ray photoelectron spectroscopy (XPS), based on which the conduction band offset (CBO) between Fe₂O₃ and SrTiO₃ was quantified to be 1.26 ± 0.03 eV. The recombination of photogenerated carriers was investigated with photoluminescence (PL) spectrum, which indicates that the formation of Fe₂O₃/SrTiO₃ decreases the recombination. Thus the improved separation efficiency is mainly due to the energy difference between the conduction band edges of Fe₂O₃ and SrTiO₃, and the decreased electron-hole recombination for Fe₂O₃/SrTiO₃.     

Sol–gel preparation and characterization of anti-reflective and self-cleaning SiO2–TiO2 double-layer nanometric films

Glass substrates were first coated with SiO₂ and then TiO₂ by dipping into sols which were prepared by two different methods involving complex formation and hydrolysis, using ethanol (EtOH) or butyl glycol (BG). Concentration of TiO₂ in the sols was kept at 0.1 and 0.5 wt%. Prepared coatings were investigated by field-emission scanning electron microscope (FESEM), atomic force microscope (AFM), hazemeter, UV–visible spectrophotometer and goniometer. Rhodamine B (RhB) photodegradation tests were performed in order to evaluate photocatalytic activity. Application of SiO₂ as the bottom layer increased the transmittance by 6% points, thereby compensated for the loss of transmittance caused by the TiO₂ self-cleaning top layer. Pencil-hardness values of the obtained coatings were in 5B–3H range. TiO₂ coatings obtained from sols containing 0.5% TiO₂ and BG solvent represented the highest photocatalytic activity, with a rate constant of 0.44 ppm⁻¹ h⁻¹ and a half period of 5.5 h. Self-cleaning surfaces were obtained while maintaining the anti-reflectance.     

Study on photocurrent of bilayers photoanodes using different combination of WO3 and Fe2O3

Bilayer photoanodes were prepared onto glass substrates (FTO) in order to improve generated photocurrents using UV-vis light by water splitting process. A comparative study of photocatalytic was performed over the films surface using Fe₂O_3, WO₃ and mixture of bicomponents (Fe₂O₃:WO₃). Different types of films were prepared using Fe₂O_3, WO₃ and bicomponents (mixture) on FTO substrates. The films were grown by sol gel method with the PEG-300 as the structure-directing agent. The photo-generated of the samples were determined by measuring the currents and voltages under illumination of UV-vis light. The morphology, structure and related composition distribution of the films have been characterized by SEM, XRD and EDX respectively. Photocurrent measurements indicated surface roughness as the effective parameter in this study. The deposited surfaces by bicomponents or mixture are flat without any feature on the surface while the deposited surfaces by WO₃ appears rough surface as small round (egg-shaped particles) and cauliflower-like. The surface deposited by Fe₂O₃ show rough no as well as WO₃ surface. The deposited surfaces by WO₃ reveal the higher value of photocurrent measurement due to surface roughness. Indeed, the roughness can be effective in increasing contact surface area between film and electrolyte and diffuse reflection (light scattering effect). The solution (Fe₂O₃:WO₃) shows the low photocurrent value in compare to WO₃ and Fe₂O₃ hat it may be due to decomposition the compound at 450 ± 1 °C to iron-tungstate Fe₂(WO₄)₃.     

Photoelectrochemical study on charge transfer properties of nanostructured Fe2O3 modified by g-C3N4

Novel photocatalysts, which consist of two visible light responsive semiconductors including graphite-like carbon nitride (g-C₃N₄) and Fe₂O₃, were successfully synthesized via electrodeposition followed by chemical vapor deposition. The morphology of the g-C₃N₄/Fe₂O₃ can be tuned from regular nanosheets to porous cross-linked nanostructures. Remarkably, the optimum activity of the g-C₃N₄/Fe₂O₃ is almost 70 times higher than that of individual Fe₂O₃ for photoelectrochemical water splitting. The enhancement of photoelectrochemical activity could be assigned to the morphology change of the photocatalysts and the effective separation and transfer of photogenerated electrons and holes originated from the intimately contacted interfaces. The g-C₃N₄/Fe₂O₃ composites could be developed as high performance photocatalysts for water splitting and other optoelectric devices.     

CuCr2O4/TiO2 heterojunction for photocatalytic H2 evolution under simulated sunlight irradiation

CuCr₂O₄/TiO₂ heterojunction has been successfully synthesized via a facile citric acid (CA)-assisted sol-gel method. Techniques of X-ray diffraction (XRD), transmission electron microscopy (TEM), and UV-vis diffuse reflectance spectrum (UV-vis DRS) have been employed to characterize the as-synthesized nanocomposites. Furthermore, photocatalytic activities of the as-obtained nanocomposites have been evaluated based on the H₂ evolution from oxalic acid solution under simulated sunlight irradiation. Factors such as CuCr₂O₄ to TiO₂ molar ratio in the composites, calcination temperature, photocatalyst mass concentration, and initial oxalic acid concentration affecting the photocatalytic hydrogen producing have been studied in detail. The results showed that the nanocomposite of CuCr₂O₄/TiO₂ is more efficient than their single part of CuCr₂O₄ or TiO₂ in producing hydrogen. The optimized composition of the nanocomposites has been found to be CuCr₂O₄·0.7TiO₂. And the optimized calcination temperature and photocatalyst mass concentration are 500 °C and 0.8 g l⁻¹, respectively. The influence of initial oxalic acid concentration is consistent with the Langmuir model.     

Optical properties of sol–gel deposited Al2O3 films

Highly transparent, uniform and corrosion resistant Al₂O₃ films were prepared on stainless-steel and quartz substrates by the sol–gel process from stable coating solutions using aluminum-sec-butoxide, Al(OBu^s)₃ as precursor, acetylacetone, AcAcH as chelating agent and nitric acid, HNO₃, as catalyzer. Films up to 1000 nm thick were prepared by multiple spin coating deposition, and were characterized by X-ray diffractometry (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), optical spectroscopy and micro Vickers hardness test. XRD of the film heat treated at 400°C showed that they had an amorphous structure. XPS confirmed that they were stoichiometric Al₂O₃. The refractive index (n) and extinction coefficient (k) were found to be n=1.56±0.01 and k=0.003±0.0002 at 600 nm, respectively. The surface microhardness and corrosion resistance investigations showed that Al₂O₃ films improved the surface properties of stainless-steel substrates.     

Facile fabrication of Bi2O3/TiO2-xNx nanocomposites for excellent visible light driven photocatalytic hydrogen evolution

Mesoporous Bi₂O₃/TiO_2−xN_x nanocomposites (BiNT) were synthesized by soft chemical template free homogeneous co-precipitation technique. XRD, XPS, TEM, UV-Vis DRS and photoluminescence studies were adapted to determine the structural, electronic and optical properties. The photocatalytic activities of the catalysts were evaluated for water splitting to generate clean hydrogen fuel under visible light irradiation (λ ≥ 400 nm). BiNT-400 catalyst showed highest results towards hydrogen production (198.4 μmol/h) with an apparent quantum efficiency of 4.3%. The pronounced activity of BiNT-400 sample towards hydrogen production was well consistent with high crystallinity, large surface area, proper excitation by N doping and Bi₂O₃ sensitization.     

Preferential oxidation of CO in H2 stream on Au/CeO2–TiO2 catalysts

A series of Au catalysts supported on CeO₂–TiO₂ with various CeO₂ contents were prepared. CeO₂–TiO₂ was prepared by incipient-wetness impregnation with aqueous solution of Ce(NO₃)₃ on TiO₂. Gold catalysts were prepared by deposition–precipitation method at pH 7 and 65 °C. The catalysts were characterized by XRD, TEM and XPS. The preferential oxidation of CO in hydrogen stream was carried out in a fixed bed reactor. The catalyst mainly had metallic gold species and small amount of oxidic Au species. The average gold particle size was 2.5 nm. Adding suitable amount of CeO₂ on Au/TiO₂ catalyst could enhance CO oxidation and suppress H₂ oxidation at high reaction temperature (>50 °C). Additives such as La₂O₃, Co₃O₄ and CuO were added to Au/CeO₂–TiO₂ catalyst and tested for the preferential oxidation of CO in hydrogen stream. The addition of CuO on Au/CeO₂–TiO₂ catalyst increased the CO conversion and CO selectivity effectively. Au/CuO–CeO₂–TiO₂ with molar ratio of Cu:Ce:Ti = 0.5:1:9 demonstrated very high CO conversion when the temperature was higher than 65 °C and the CO selectivity also improved substantially. Thus the additive CuO along with the promoter and amorphous oxide ceria and titania not only enhances the electronic interaction, but also stabilizes the nanosize gold particles and thereby enhancing the catalytic activity for PROX reaction to a greater extent.     

Preparation and photoelectrochemical properties of functional carbon nanotubes and Ti co-doped Fe2O3 thin films

Functional carbon nanotubes (CNTs) were incorporated into Ti-doped Fe₂O₃ thin films by a facile, one-step co-electrodeposition method. The films were characterized by X-ray diffraction, scanning electron microscopy, UV–visible absorption, and X-ray photoelectron spectroscopy. The introduction of CNTs results in a better absorption in visible region and greatly enhances the photoelectrochemical properties of the Ti–Fe₂O₃ films. The improved photoelectrochemical properties of the CNTs and Ti co-doped Fe₂O₃ films are due to the charge equilibration which interplays between the Ti–Fe₂O₃ and CNTs. The effect of CNTs to mediate fast charge transfer and to retard charge recombination rate in the composites is also demonstrated by kinetics analysis and electrochemical impedance spectroscopy. The influence of different groups-modified CNTs and different content of CNTs was also studied. The highest photocurrent is 4.5 mA/cm² at 1.23 V (vs. RHE) obtained by incorporating 0.10 mg/mL amino-group modified CNTs in the Ti–Fe₂O₃ film. The amino-functionalized CNTs doped film exhibits the highest photoelectric response compared with those doped by the pristine and acid-treated CNTs under the same conditions, which can be ascribed to the better hydrophilicity and dispersibility of the amino-functionalized CNTs.     

Solar photocatalytic degradation of methylene blue in carbon-doped TiO2 nanoparticles suspension

Carbon-doped TiO₂ nanoparticles were prepared by sol–gel auto-combustion method and characterized by X-ray diffraction (XRD), X-ray photoelectron spectra (XPS), Brunauer–Emmett–Teller method (BET), UV–vis diffuses reflectance spectroscopy (DRS). UV–vis diffuse reflectance spectra showed that carbon-doped TiO₂ exhibited obvious absorption in the visible light range. The visible light photocatalytic activity of carbon-doped TiO₂ was ascribed to the presence of oxygen vacancy state between the valence and the conduction bands because of the formation of Ti³⁺ species in the as-synthesized carbon-doped TiO₂. The sample calcined at 873 K showed the highest photocatalytic activity under solar irradiation. The effects of photocatalyst concentration, initial concentration of methylene blue, and pH value in aqueous solution were also presented.     

Al2O3-coated nanoporous TiO2 electrode for solid-state dye-sensitized solar cell

This paper reports the preparation of a core-shell nanoporous electrode consisting of an inner TiO₂ porous matrix and a thin overlayer of Al₂O₃, and its application for solid-state dye-sensitized solar cell using p-CuI as hole conductor. Al₂O₃ overlayer was coated onto TiO₂ porous film by the surface sol–gel process. The role of Al₂O₃ layer thickness on the cell performance was investigated. The solar cells fabricated from Al₂O₃-coated electrodes showed superior performance to the bare TiO₂ electrode. Under illumination of AM 1.5 simulated sunlight (89 mW/cm²), a ca. 0.19 nm Al₂O₃ overlayer increased the photo-to-electric conversion efficiency from 1.94% to 2.59%.     

Electrochromic properties of Nb2O5 sol–gel coatings

Sol–gel niobium oxide coatings are promising electrochromic materials. The sols have been prepared by a sonocatalytic mixing of NbCl₅ powder, butanol and acetic acid. Thermal analysis (DTA/TG) coupled to mass spectrometry has been performed on Nb₂O₅ precipitates to quantitatively analyse the effluents. Transparent and defect-free single and multilayers coatings have been deposited on ITO-coated glass by a dip-coating process and then calcined between 400°C and 600°C. The coatings structure change from amorphous to crystalline (TT form) and the later ones are highly textured. The films present a reversible and fast insertion/extraction kinetics for Li⁺ ions. After insertion the amorphous coatings present a grey-brown color, while the crystalline ones are dark blue. The maximum charge density exchanged with a three-layer 200 nm thick coating sintered at 600°C was 16 mC/cm² with a corresponding spectral transmission change practically wavelength-independent varying from 80% to 20%. The coloring efficiency determined at λ=600 nm was 22 cm²/C.     

The preparation of TiO2–nitrogen doped by calcination of TiO2·xH2O under ammonia atmosphere for visible light photocatalysis

The investigation on incorporating nitrogen group into titanium dioxide in order to obtain powdered visible light-active photocatalysts is presented. The industrial hydrated amorphous titanium dioxide (TiO₂·xH₂O) obtained directly from sulphate technology installation was modified by heat treatment at temperatures of 100–800 °C for 4 h in an ammonia atmosphere. The photocatalysts were characterized by UV–VIS–DR and XRD techniques. The UV–VIS–DR spectra of the modified catalysts exhibited an additional maximum in the VIS region (, ) which may be due to the presence of nitrogen in TiO₂ structure. On the basis of XRD analysis it can be supposed that the presence of nitrogen does not have any influence on the transformation temperature of anatase to rutile. The photocatalytic activity of the modified photocatalysts was determined on the basis of decomposition rate of phenol and azo-dye (Reactive Red 198) under visible light irradiation. The highest rate of phenol degradation was obtained for catalysts calcinated at 700 °C (6.55%), and the highest rate of dye decomposition was found for catalysts calcinated at 500 and 600 °C (ca. 40–45%). The nitrogen doping during calcination under ammonia atmosphere is a very promising way of preparation of photocatalysts which could have a practical application in water treatment system under broader solar light spectrum.