Novel Carbon Dioxide Microsensor Based on Tin Oxide Nanomaterial Doped With Copper Oxide

Carbon dioxide $({rm CO}_{2})$ is one of the major indicators of fire and therefore its measurement is very important for low-false-alarm fire detection and emissions monitoring. However, only a limited number of ${rm CO}_{2}$ sensing materials exist due to the high chemical stability of ${rm CO}_{2}$. In this work, a novel ${rm CO}_{2}$ microsensor based on nanocrystalline tin oxide $({rm SnO}_{2})$ doped with copper oxide (CuO) has been successfully demonstrated. The ${rm CuO}hbox{-}{rm SnO}_{2}$ based ${rm CO}_{2}$ microsensors are fabricated by means of microelectromechanical systems technology and sol-gel nanomaterial-synthesis processes. At a doping level of ${rm CuO}:{rm SnO}_{2} =1:8$ (molar ratio), the resistance of the sensor has a linear response to ${rm CO}_{2}$ concentrations for the range of 1% to 4% ${rm CO}_{2}$ in air at 450$^{circ}{rm C}$. This approach has demonstrated the use of ${rm SnO}_{2}$, typically used for the detection of reducing gases, in the detection of an oxidizing gas.      

Development of a High-k Pr $_{2}$O $_{3}$ Sensing Membrane for pH-ISFET Application

In order to develop a pH sensor having a good pH-sensing characteristic, electrolyte-insulator-semiconductor capacitors using a high-k Pr$_{2}$O$_{3}$ thin film as the sensing membrane were fabricated on silicon substrates by reactive radio frequency sputtering. The structural and morphological features of these films with annealing at various temperatures were studied by X-ray diffraction, atomic force microscopy, and X-ray photoelectron spectroscopy. The Pr$_{2}$O $_{3}$ sensing film after annealing at 900$;^{circ}$C is suggested to the increase in the interfacial SiO $_{2}$ and silicate formation, and the high surface roughness. Therefore, a physical vapor deposition Pr$_{2}$O $_{3}$ film is adopted as a new pH-sensing layer. The result produces a pH response of 52.9 mV/pH $({rm pH}=2hbox{--}12)$, a hysteresis voltage of 17.5 mV $({rm pH}=7 to 4 to 7to 10 to 7)$, and a drift rate of 2.15 mV/h (${rm pH}=7$ buffer solution).      

Comparison of Alternative Techniques for Characterizing Magnetostriction and Inverse Magnetostriction in Magnetic Thin Films

We compare the direct and inverse techniques of measuring magnetostriction in magnetic thin films. We chose a set of four magnetic thin film samples (Co$_{95}$Fe$_5$, Co$_{60}$Fe$_{20}$B$_{20}$, Ni$_{65}$Fe$_{15}$Co$_{20}$, and Ni$_{80}$Fe$_{20}$) for the measurements, representing positive and negative magnetostriction and having saturation magnetostriction of magnitudes ranging from $10^{-7}$ to $10^{-5}$. We made the direct measurements on a high-precision optical cantilever beam system, and we carried out the inverse magnetostriction measurements on a nondestructive inductive $Bhbox{-}H$ looper with three-point bending stage.      

Modeling and Simulation of a Single Tin Dioxide Nanobelt FET for Chemical Sensors

This paper presents the modeling and simulation of a tin dioxide (${rm SnO}_{2}$) field-effect transistor (FET)-based nanobelt gas sensor. The model results are compared to numerical simulations and experimental data obtained from published results describing the fabrication of single crystal nanobelts grown through thermal evaporation techniques. The fabricated sensor shows good response when exposed to oxygen (${rm O} _{2}$) and hydrogen (${rm H} _{2}$) at room temperature. Gas adsorption causes changes in the electrical contacts due to oxygen vacancies in the bulk. As a result, the ${rm I}$ -${rm V}$ characteristics are very different when the device is exposed to (${rm O} _{2}$) versus (${rm H} _{2}$ ). In the presence of ${rm H} _{2}$, the behavior of the contacts is ohmic and saturation is caused by pinch-off of the channel at the drain contact. However, in the presence of ${rm O} _{2}$ , the behavior of the contacts is Schottky, and device saturation occurs at the source end of the device. Our model is based on a depletion mode MOSFET and it accounts for both ohmic and Schottky contacts when the device is exposed to oxygen or hydrogen. It also provides a possible explanation for the gate bias dependence of the saturation current seen in some published characterization data.      

Effects of Post-Deposition Annealing and Oxygen Content on the Structural and pH-Sensitive Properties of Thin Nd $_{2}$O $_{3}$ Films

This paper describes the structural properties and sensing characteristics of thin Nd$_{2}$O$_{3}$ sensing membranes deposited on silicon substrates by means of reactive sputtering. X-ray diffraction, X-ray photoelectron spectroscopy, and atomic-force microscopy were used to study the chemical and morphological features of these films as functions of the growth conditions (argon-to-oxygen flow ratios of $20/5, 15/10$ and $10/15$; temperatures ranging from 600$~^{circ}$C to 800$~^{circ}$C). The thin Nd$_{2}$O$_{3}$ electrolyte-insulator-semiconductor devices prepared under a 15/10 flow ratio with subsequent annealing at 700$~^{circ}$C exhibited a higher sensitivity (56.01 mV/pH, in the solutions from pH 2 to 12), a smaller hysteresis voltage (4.7 mV in the pH loop $7 to 4 to 7to 10 to 7$), and a lower drift rate (0.41 mV/h in the pH 7 buffer solution) than did those prepared at the other conditions. We attribute this behavior to the optimal oxygen content in this oxide film forming a high density of binding sites and a small surface roughness.      

Effect of Factors on Coercivity in Sr–La–Co Sintered Ferrite Magnets

We varied the composition and sintering temperature of Sr–La–Co ferrite magnets to analyze the effects of various important factors on coercivity $(H_{rm cJ})$. We examined the effects of crystal grain size and distribution, the mechanism of magnetization reversal, the degree of crystal grain orientation (OD), and the anisotropy field $(H_{rm A})$ on $H_{rm cJ}$. We proposed an equation based on the experimental results that expresses the measured $H_{rm cJ}$ and considers these effects as $H_{rm cJ} = C_{rm t}(0.4/R_{rm h})$ OD $(H_{rm A} - H_{rm d} - H_{rm in})$, where $C_{rm t}, R_{rm h}, H_{rm d}$, and $H_{rm in}$ are the crystal grain size effects on $H_{rm cJ}$ of sintered magnet, rotational hysteresis integral corresponding to the mechanism of magnetization reversal, demagnetizing field of shape anisotropy, and interaction field between crystal grains, respectively. We found that apart from the volume ratio for single-domain crystal grains and $H_{rm A}$, the mechanism of magnetization reversal had significant effects on $H_{rm cJ}$ for Sr–La–Co sintered ferrite magnets.      

Optimization of Spin-Valve Structure NiFe/Cu/NiFe/IrMn for Planar Hall Effect Based Biochips

This paper deals with the planar Hall effect (PHE) of Ta(5)/NiFe$(t_{rm F})$/Cu(1.2)/NiFe$(t_{rm P})$/IrMn(15)/Ta(5) (nm) spin-valve structures. Experimental investigations are performed for 50 $mu$m$times hbox{50} mu$m junctions with various thicknesses of free layer ( $t_{rm F} = 4, 8, 10, 12, 16, 26$ nm) and pinned layer ($t_{rm P} = 1, 2, 6, 8, 9, 12$ nm). The results show that the thicker free layers, the higher PHE signal is observed. In addition, the thicker pinned layers lower PHE signal. The highest PHE sensitivity $S$ of 196 $mu$V/(kA/m) is obtained in the spin-valve configuration with $t_{rm F} = 26$ nm and $t_{bf P} = 1$ nm. The results are discussed in terms of the spin twist as well as to the coherent rotation of the magnetization in the individual ferromagnetic layers. This optimization is rather promising for the spintronic biochip developments.      

Thermal Diffusivity and Related Properties of Colossal Magnetoresistive La$_{0.67}$Ca$_{0.33}$MnO $_{3}$ With Various Grain Sizes

Using the open-cell photoacoustic technique, we have measured the room-temperature thermal diffusivities of the colossal magnetoresistive material La$_{0.67}$Ca$_{0.33}$MnO$_{3 }$, sintered between 1100$;^{circ}$ C and 1350$;^{circ}$ C, with average grain sizes 1, 3, 5, and 10 $mu$m. We obtained the thermal diffusivities by analyzing the phase of photoacoustic signals in thermally thick samples using Calderon's method. We found that the insulator-metal transition temperature does not depend on the grain size ($T_{rm IM} sim 272$ K). However, the thermal diffusivity increases with grain size, with values between 0.431 and 0.969 mm $^{2}$s $^{-1}$. Other related electrical and thermal properties, including the electrical conductivity, thermal conductivity, and phonon mean free path, are also dependent on the grain size. The electronic contribution to the thermal conductivity is 2%–3% of the total thermal conductivity for smaller grain sizes (1–5 $mu$m) and increases to about 24% when the grain size is increased to 10 $mu$ m.      

Microstructure, Electrical, and Magnetic Properties of ZrO$_{2}$ Added MnZn Ferrites

We investigated the influence of ZrO$_{2}$ on the microstructure and electromagnetic properties of MnZn ferrites by characterizing fracture surface micrographs, magnetic properties, and dc resistivity. Powders of Mn $_{0.68}$Zn $_{0.25}$Fe $_{2.07}$O $_{4}$ composition were prepared by the conventional ceramic technique. Toroidal cores were sintered at 1350 $^{circ}$C for 4 h in N$_{2}$/O$_{2}$ atmosphere with 4% oxygen. The results show that the lattice constant and average grain size increase with ZrO$_{2}$ concentration, but excessive ZrO $_{2}$ concentration will result in exaggerated grain growth and porosity increase. The dc resistivity, activation energy, saturation magnetic flux density, and initial magnetic permeability increase monotonically when the ZrO$_{2}$ concentration is not more than 0.04 wt% and then decrease with further increase of ZrO$_{2}$ concentration. On the other hand, the porosity, drift mobility, resonance frequency, and core loss decrease initially and then increase with the increase of ZrO$_{2}$ concentration.      

Fabrication and Application of Ruthenium-Doped Titanium Dioxide Films as Electrode Material for Ion-Sensitive Extended-Gate FETs

A novel ruthenium-doped titanium dioxide (TiO $_{2}$: Ru) film for pH detection is based on an ion-sensitive extended gate field effect transistor (ISEGFET) sensor. For the preparation of the TiO$_{2}$ : Ru sensing film, a specific processing for metal modification of TiO$_{2}$ thin film is deposited by a co-sputtering system. After thermal annealing treatment, material analysis of the sensing layer is measured by SEM, Hall measurement system and electrical detection system. The average sensitivity of TiO$_{2}$: Ru for hydrogen ion detection is about 55.20 mV/pH (concentration range between pH1 and pH13). The effect of long-term drift for TiO$_{2}$ : Ru ISEGFET-based sensor is presented. Drift rate of the sensor for pH is 0.745 mV/h for 12 h. In order to prepare the calcium ion sensor, the sensing membrane of polymer materials is based on TiO $_{2}$: Ru ISEGFET-based sensor by physical adsorption. The average sensitivity of the calcium ion sensor in the concentration ranging between 1 M and 1$,times,$ 10$^{-3}$ M CaCl$_{2}$ is about 29.65 mV/pCa.      

Attenuated Oscillation of the Tunneling Magnetoresistance in a Ferromagnet-Metal-Insulator-Ferromagnet Tunneling Junction

The tunneling magnetoresistance (TMR) ratio is investigated in a ferromagnet-metal-insulator-ferromagnet planar tunneling junction by use of the spin-polarized free-electron model. Due to the coherence multiple reflective scatterings within the metallic layer, the TMR ratio oscillates as the metallic thickness increases. Due to the same scatterings, not only electrons with the out-of-plane energy $E_{xi}$ close to the Fermi energy $E_{F}$ but also electrons with $E_{xi}$ below $E_{F}$ can tunnel sufficiently through the tunneling junction, which leads to the attenuated oscillation of the TMR ratio.      

Establishment of All Digital Closed-Loop Interferometric Fiber-Optic Gyroscope and Scale Factor Comparison for Open-Loop and All Digital Closed-Loop Configurations

This paper covers the design details of an all digital closed-loop interferometric fiber-optic gyroscope (ADCL-IFOG) prototype, constructed in TUBITAK UME, and scale factor comparison between open-loop and ADCL-IFOG prototypes with sine wave biasing modulation. The output of demodulation circuit, proportional to the applied rotation rate, was sampled by AD7714YN analog-to-digital converter (ADC), operated in 16 bit resolution. Error voltage, generated by microcomputer – controlled LTC 1667CG, 14 bit digital to analog converter (DAC), was sent to the phase modulator through a linear summing circuit to make Sagnac Phase Shift zero, depending on the rotation direction. For this implementation, the ultimate rotation rate of 1.84 ($^{circ}/{hbox{h}}$ ) was nullified. The averaged sensitivity of the proposed closed-loop IFOG in unit of error voltage applied to the phase modulator was determined as 132.65 $mu hbox{V}/(^{circ}/{hbox{h}}$ ). The scale factors of both the open-loop and ADCL-IFOG prototypes were compared in a range of 1–15270 ( $^{circ}/hbox{h}$) rotation rate, corresponding to Sagnac Phase Shifts varying from 0.00115 ( $^{circ}$) to 17.57448 ( $^{circ}$). The maximum peak to peak noise and the bias stability of ADCL-IFOG prototype were determined as 4.97 ($^{circ}/hbox{h}$ ) and 1.48 ($^{circ}/hbox{h}$ ) at 23.0$~^{circ}hbox{C}$ , respectively.      

Development of a New Selective Optical Sensor for Cd(II) Ions Based on 4-Hydroxy Salophen

A new sensor membrane based on immobilization of 4-hydroxy salophen on triacetyl cellulose has been developed for the determination of Cd(II) ions that displays excellent performance. The sensing membrane is capable of spectrophotometric determining of Cd(II) with an outstanding high selectivity over a dynamic range between 1.0$,times 10^{-6}$ and 5.0$,times 10^{-2}$ mol L$^{-1}$ with a limit of detection of 5.3 $,times 10^{-7}~$mol L $^{-1}$ (0.06 $mu$g mL $^{-1}$ The sensor shows a fast response time ($≪ {5}~$ min) and the membrane can be used for more than two months without observing any major deviation. The optode revealed very good selectivity with respect to many cations including alkali, alkaline earth, transition and heavy metal ions. The proposed sensor could be used to determine cadmium ions in water and waste water samples. Different experimental parameters such as variable affecting on sensor preparation and pH of the sample solution plus response time were studied. The optodes developed in the present work were found to be stable, cost effective, easy to prepare, and efficient for direct determination of Cd(II) in a variety of aqueous samples using spectrophotometry, with satisfactory results.      

A Vibration-Based PMN-PT Energy Harvester

We report design, modeling, analysis, and experimental study of a vibration-based piezoelectric energy harvester. The energy harvester is made of a composite cantilever of a single crystal relaxor ferroelectric material, $(1-x)$Pb(Mg $_{1/3}$Nb $_{2/3}$)O $_{3-x}$PbTiO $_3$ (PMN-PT), and a polydimethylsiloxane (PDMS) base layer. A PDMS proof mass is constructed at the tip of the composite cantilever beam and is used as a means to tune the system natural frequency. The use of the PMN-PT piezoelectric material and an interdigited electrodes (IDEs) design improves the energy conversion efficiency. A dynamic systems modeling approach is employed to analyze the responses and the performance of the harvester design. We have demonstrated that a prototype of the harvester with a size of 7.4 mm $,times,$2 mm $,times,$110 $mu$m outputs a voltage of 10 V (0.3 mW power) under a vibration excitation with a peak-to-peak amplitude of 1 mm at a frequency around 1.3 kHz. Based on the experimental results, the power density prediction of the proposed harvester design shows a superior performance than that of the other reported piezoelectric harvesters.      

Magnetic Normal Modes in Squared Antidot Array With Circular Holes: A Combined Brillouin Light Scattering and Broadband Ferromagnetic Resonance Study

We present a combined experimental investigation of magnetic normal modes in an antidot lattice using both Brillouin light scattering and broadband ferromagnetic resonance. It was fabricated on a silicon substrate using optical ultraviolet lithography. The sample consisted of a 30-nm-thick ${rm Ni}_{80}{rm Fe}_{20}$ squared antidot array with circular holes whose diameter and edge-to-edge spacing are 250 and 150 nm, respectively. Experiments were performed as a function of the applied magnetic field $mu_{0}{rm H}_{rm ext}$ in the range from $-$100 to 100 mT, with ${rm H}_{rm ext}$ applied along both the square lattice axis and its diagonal. Several peaks were observed in both the Brillouin light scattering and ferromagnetic resonance spectra, and their evolution with the intensity and the direction of the applied field ${rm H}_{rm ext}$ was measured. Micromagnetic simulations enabled us to identify the modes in terms of their symmetry obtaining a good quantitative agreement with the measured frequencies. In addition, we show how the inhomogeneity of the internal field affected the properties of the magnetic eigenmodes and their localization in different regions of the antidot lattice.      

A Phototransistor-Based High-Sensitivity Biosensing System Using 650-nm Light

A miniature optical biosensing system based on a PMOS phototransistor and absorption photometry is proposed. The phototransistor was manufactured in a standard 0.35-$mu{rm m}$ CMOS process, and it exhibited a responsivity higher than 1000 A/W for 650-nm light. For biochemical applications, the ${rm TMB/H}_{2}{rm O}_{2}/{rm HRP}$ method was adopted as a useful basis in our system. A sample volume of only 10 $mu{rm l}$ was required to be dropped on the slide above the phototransistor. Experimental results demonstrated that a high sensitivity of 2.5 $mu{rm A/pM}$ was achieved, and the minimum HRP concentration successfully detected was 2.7 pM. This detection limit is three orders of magnitude better than that of a lately reported silicon biosensor, and is even comparable to that of a commercial spectrophotometer.      

CMRR in Voltage-Op-Amp-Based Current-Mode Instrumentation Amplifiers (CMIA)

The common-mode rejection ratio (CMRR) of a power-supply current-sensing current-mode instrumentation amplifier (CMIA) has theoretically been analyzed and formulated. The theory was further investigated by doing experiments using $mu$ A741 and TL071 as op-amps and CA3096 transistors as the current mirrors of the CMIA. Both theoretical and practical investigations proved that both the dc and ac performances of CMRR depend on the matching status of parameters such as $hbox{CMRR}$, open-loop gain $A$, gain-bandwidth product $hbox{GB}$, and the output resistance $R_{O}$ of the input op-amps of the CMIA. It has also been shown that, in the CMIA, unlike the voltage-mode instrumentation amplifier, voltage gain is independent of the bandwidth.      

Bit Storage by 360 $^{circ}$ Domain Walls in Ferromagnetic Nanorings

We propose a theoretical design for a magnetic memory cell, based on thin-film ferromagnetic nanorings, that can efficiently store, record, and read out information. An information bit is represented by the polarity of a stable 360$^{circ}$ domain wall introduced into the ring. Switching between the two magnetization states is done by a current applied to a wire passing through the ring, whereby the 360$^{circ}$ domain wall splits into two charged 180 $^{circ}$ walls, which then move to the opposite extreme of the ring to recombine into a 360 $^{circ}$ wall of the opposite polarity.      

Correlation Between the Degradation of Perpendicular Anisotropy and the Double Hysteresis Behavior in [Pd/Co]$_{rm n}$/FeMn Exchange Biased Thin Films

We clearly detected double hysteresis by increasing Co layer thickness and decreasing the number of bilayers in perpendicular exchange biased [Pd(0.6)/Co$(t)$] $_{rm n}$/FeMn(11.6 nm) thin films. In-plane tensile stress calculations confirmed that the appearance of double hysteresis is closely related to the degradation of stress-induced perpendicular anisotropy in the [Pd/Co] multilayers. Furthermore, annealing at the magnetic field applied perpendicular to the film plane directly verified that the enhancement of thermally induced perpendicular anisotropy, $K_{rm eff-induced}$, in the [Pd/Co] multilayers is the main physical reason for removal of the double hysteresis. All our experimental and theoretical results demonstrated that perpendicular anisotropy is the dominant factor in controlling the double hysteresis behavior of perpendicularly magnetized [Pd/Co]$_{rm n}$/FeMn exchange biased thin films.      

Measurement of Rapid Temperature Profiles Using Thermoluminescent Microparticles

The thermal history of a material with initially filled trap states may be probed using thermoluminescence. Since luminescent microparticles are composed of robust oxides, they are viable candidates for sensing temperature under conditions where all other types of direct-contact sensors fail. ${rm Mg}_{2}{rm SiO}_{4}:{rm Tb},{rm Co}$ particles with two thermoluminescent peaks have been heated using micromachined heaters over a 232 $~^{circ} hbox{C}$ to 313 $~^{circ} hbox{C}$ range on time scales of less than 200 ms. The effect of maximum temperature during excitation on the intensity ratio of the two luminescent peaks has been compared with first-order kinetics theory and shown to match within an average error of 4.4%.