Hydrogen storage in boron substituted carbon nanotubes

Template assisted synthesis of boron substituted carbon nanotubes was carried out by the carbonization of hydroborane polymer in alumina membrane template. The nanotubes were characterized by electron microscopic analysis, FT-Raman, FT-IR, XRD, X-ray photoelectron spectroscopy (XPS) and ¹³C & ¹¹B MAS NMR techniques. The presence of boron in different chemical environment has been visualized by XPS and ¹¹B MAS NMR. The hydrogen absorption activity has been studied and a maximum of 2 wt% hydrogen storage capacity was observed.     

Synthesis and structural characterization of thin multi-walled carbon nanotubes with a partially facetted cross section by a floating reactant method

Here we describe synthesis of very unusual multi-walled carbon nanotubes through a catalytic chemical vapor deposition method using a floating reactant method and subsequent thermal treatment up to 2600 °C in a large quantity. Main characteristics of these nanotubes are (1) relatively wide distribution of diameters ranging from 20 to 70 nm and linear, long macro-morphology (aspect ratio >100), (2) highly straight and crystalline layers, (3) high purity through removal of metallic impurity, (4) very low interlayer spacing (0.3385 nm) and low R value (I_D/I_G = 0.0717), (5) high G′ intensity over intensity of G band (G′/G = 0.85) and strongly negative magnetoresistance value of −1.08% at 77 K and 1 T. The unusual microstructure of thin multi-walled carbon nanotubes with a partially facetted cross-sectional shape caused by thermal treatment is mainly ascribed to abrupt density changes (from 1.89 to 2.1 g/cm³) within a confined nanosized space, accompanying with the phase separation.     

Novel mesoporous MnO2 for high-rate electrochemical capacitive energy storage

MnO₂ with novel mesoporous structure has been firstly synthesized via a simple in situ reduction process by using different carbon materials as sacrificed template and reducing agent. The morphology and microstructure of as-synthesized mesoporous MnO₂ were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), nitrogen adsorption and desorption experiments. The results demonstrate that porous MnO₂ prepared using mesoporous carbon as template has very large specific surface area and uniform pore-size distribution. The electrochemical measurements showed that novel porous MnO₂ have higher capacity (221 F g⁻¹) with excellent rate and higher capacity retention as electrochemical capacitors (ECs) electrode materials, which may be attributed to the unique nanostrcture of porous MnO_2. These all imply that MnO₂ with novel mesoporous structure has been attractive for practical and large-scale applications in mobile equipment.     

Bimodal, templated mesoporous carbons for capacitor applications

Several high capacitance ordered mesoporous carbon (OMC) materials, containing a bimodal pore distribution, were synthesized directly using hexagonal mesoporous silicas (HMS) as the template material. The HMS templates were formed using amine surfactants (C_nH_2n+1NH₂) with hydrophobic chain lengths containing 8-16 carbons (n = 8-16). These HMS structures were found to have an interconnected wormhole structure, high textural mesoporosity, a surface area ranging from 910 to 1370 m²/g, and a total pore volume of 1.09-1.83 cm³/g. Also, evidence for a change in structure from hexagonally ordered to layered (for surfactants of chain length with n > 12) was found. The resulting OMCs, formed using sucrose as the carbon precursor, contain bimodal pores 1.6-1.8 and 3.3-3.9 nm in diameter and have a very high surface area (980-1650 m²/g). The OMCs were evaluated as electrode materials for electrochemical capacitors using cyclic voltammetry in 0.5 M H₂SO₄ solution, giving a tunable gravimetric capacitance that increased linearly with BET area (and surfactant chain length), up to 260 F/g, among the highest yet reported for ordered carbon formed from an HMS templated precursor. All OMCs studied in this work displayed a specific capacitance of ∼0.15 F/m².     

Activated carbon nanotubes-supported catalyst in fuel cells

The electrochemical property of platinum loaded on activated carbon nanotubes (Pt/ACNTs) was investigated by cyclic voltammograms (CVs) recorded in H₂SO₄ and H₂SO₄/CH₃OH aqueous solutions, respectively. Compared to 0.0046 A/cm² of Pt-loaded on pristine carbon nanotubes (Pt/CNTs) with a S_BET of 164 m²/g and 0.0042 A/cm² of conventional carbon black (Pt/C, Vulcan XC-72) with a S_BET of ∼250 m²/g, a better electrochemical activity (a high current density of 0.0070 A/cm² for weak-H₂ adsorption/desorption) of the Pt/ACNTs with high specific surface area (S_BET) of 830-960 m²/g was obtained. Furthermore, the highest current density of 0.079 A/cm² at 0.65 V in anodic sweep was observed during the methanol oxidation. On the basis of Pt size, utility ratio, and electro-active specific surface area (EAS), the Pt/ACNTs with a high Pt-loading of 50 wt.% exhibited the best electrochemical activity. The present ACNTs may be an excellent support material for electrochemical catalyst in proton exchange membrane and direct methanol fuel cells.     

Fabrication and electrochemical properties of carbon nanotube array electrode for supercapacitors

The multiwalled carbon nanotube (MWNT) array was fabricated by chemical vapor deposition (CVD) in the template of porous alumina from the carbonaceous source of C₂H₂ in the presence of a catalyst of ferric metals. To utilize the external surface other than the inner surface of the carbon nanotubes, 1 mol/L sulfuric acid was applied to remove off the most part of AAO template on the carbon nanotube electrode. The electrochemical performances of the carbon nanotube array electrode were investigated by use of the cyclic voltammetry, galvanostatic charge/discharge and ac impedance methods for its application in supercapacitors. The specific capacitance of 365 F/g of the electrode was achieved with the discharge current density of 210 mA/g in the solution of 1 mol/L H₂SO₄. In addition, the carbon nanotube array electrode was found to have low equivalent series resistance (ESR) and good cycling stability.     

Preparation of alumina/carbon nanotubes composites by chemical precipitation

Continuous alumina coating on multi-walled carbon nanotubes (MWCNTs) was successfully prepared by a new method of chemical precipitation using aluminum nitrate and ammonia as starting materials. Structure and morphology of the alumina/multi-walled carbon nanotubes (Al₂O₃/MWCNTs) composites were characterized by transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), infrared spectra (IR), thermo gravimetric analysis (TG), differential thermal analysis (DTA) and N₂ adsorption–desorption. The results show that polyvinyl alcohol (PVA) modification on the surface of MWCNTs contributes to form continuous alumina coating, γ-Al₂O₃ layers with thickness of 1–3 nm cover the surface of MWCNTs and the original structure of MWCNTs is retained during the coating process.     

Synthesis and characterization of carbon nanofiber/alumina composite by extrusion casting

A macroscopic carbon nanofiber (CNF)/alumina composite was synthesized by extrusion casting. Its textural and mechanical properties, crystallinity, surface acidity and thermal stability were investigated using N₂ physisorption, scanning electron microscopy, temperature programmed desorption of NH₃ (NH₃-TPD), X-ray diffraction and thermal gravimetric (TG) analysis. It was shown that the CNFs and alumina were evenly and intimately blended in the composite which displayed a lateral crushing strength greater than 100 N/cm. The composite had a mesoporous structure, possessing a surface area greater than 320 m²/g and a narrow pore size distribution. NH₃-TPD results demonstrated that, compared to those on commercial alumina, the total number of acid sites on the composite (related to the total amount of desorbed NH₃) was significantly increased while the number of strong acid sites (related to the amount of desorbed NH₃ between 400 and 500 °C) was distinctly decreased. TG analysis revealed that the composite was stable up to 600 °C in air or 900 °C in an inert atmosphere.     

Epoxy-based carbon films with high electrical conductivity attached to an alumina substrate

Carbon-based films (0.8-13 μm thick) with good bonding to the substrate and high processability were produced at 650 °C on an alumina substrate, using SU 2.5 bisphenol-A type novolac epoxy (plus triethyleneteramine curing agent) as the carbon precursor. This precursor gave crack-free and scratch resistant carbon films. Interconnected filamentary nickel nanoparticles were more effective for conductivity enhancement than silver nanoparticles or multiwalled carbon nanotubes at 5 vol.% or below, in spite of the high conductivity of silver and the high aspect ratio of nanotubes. The carbon film with 2.5 vol.% nickel showed resistivity 6 × 10⁻³ Ω cm.     

Effect of carbon nanotubes on sintering behavior of alumina prepared by sol–gel method

Alumina (Al2O3)/carbon nanotube (CNT) (99/1 by weight) composite was prepared by mixing CNT dispersion with AlCl₃-based gel, followed by high temperature sintering at a temperature up to 1150 °C in argon. Composite alumina precursor showed phase transition order from amorphous to γ-Al₂O₃ after sintered at 900 °C for 2 h, partially to θ-Al₂O₃ after sintered at 1000 °C for 2 h, and then partially to α-Al₂O₃ after sintered at 1150 °C for 2 h. By comparison, control alumina precursor directly transformed from amorphous to α-Al₂O₃ after sintered at a relatively low temperature of 600 °C for 2 h. Composite alumina showed porous structure with pore diameter ranging from 100 nm to 2 µm, whereas control alumina was relatively pore-free. The elevated alumina-crystal phase transition temperatures and the formation of porous structure were ascribed to the presence of CNTs in alumina precursor. The composite alumina sintered at 900 °C for 2 h containing only γ-Al₂O₃ had a BET surface area of 138 m²/g, which was significantly higher than that of control alumina sintered at 1150 °C for 2 h containing only α-Al₂O₃, ~15 m²/g.     

Removal of entrapped iron compounds from isothermally treated catalytic chemical vapor deposition derived multi-walled carbon nanotubes

Compositional changes of the residual iron compounds in isothermally treated catalytic chemical vapor deposition derived multi-walled carbon nanotubes have been monitored using ⁵⁷Fe transmission Mössbauer spectroscopy and X-ray fluorescence. The iron phases entrapped in the as-synthesized carbon nanotubes consist of γ-iron, α-iron, Fe₃C and Fe_1−xS. The Fe_1−xS phase decomposes completely around 1500 °C while the iron carbide phase decomposes in the temperature range of 1500-2400 °C. The obtained apparent activation energy of ca. 76 kcal/mol suggests that the entrapped iron was removed via a diffusion process during thermal treatment.     

Kinetics and PEMFC performance of RuxMoySez nanoparticles as a cathode catalyst

Kinetics of Ru_xMo_ySe_z nanoparticles dispersed on carbon powder was studied in 0.5 M H₂SO₄ electrolyte towards the oxygen reduction reaction (ORR) and as cathode catalysts for a proton exchange membrane fuel cell (PEMFC). Ru_xMo_ySe_z catalyst was synthesized by decarbonylation of transition-metal carbonyl compounds for 3 h in organic solvent. The powder was characterized by X-ray diffraction (XRD), and transmission electron microscopy (TEM) techniques. Catalyst is composed of uniform agglomerates of nanocrystalline particles with an estimated composition of Ru₆Mo₁Se₃, embedded in an amorphous phase. The electrochemical activity was studied by rotating disk electrode (RDE) and rotating ring-disk electrode (RRDE) techniques. Tafel slopes for the ORR remain invariant with temperature at −0.116 V dec⁻¹ with an increase of the charge transfer coefficient in dα/dT = 1.6 × 10⁻³, attributed to an entropy turnover contribution to the electrocatalytic reaction. The effect of temperature on the ORR kinetics was analyzed resulting in an apparent activation energy of 45.6 ± 0.5 kJ mol⁻¹. The catalyst generates less than 2.5% hydrogen peroxide during oxygen reduction. The Ru_xMo_ySe_z nanoparticles dispersed on a carbon powder were tested as cathode electrocatalyst in a single fuel cell. The membrane-electrode assembly (MEA), included Nafion^® 112 as polymer electrolyte membrane and commercial carbon supported Pt (10 wt%Pt/C-Etek) as anode catalyst. It was found that the maximum performance achieved for the electro-reduction of oxygen was with a loading of 1.0 mg cm⁻² Ru_xMo_ySe_z 20 wt%/C, arriving to a power density of 240 mW cm⁻² at 0.3 V and 80 °C.     

Thermal oxidative cutting of multi-walled carbon nanotubes

Commercially available, multi-walled carbon nanotubes grown by CVD are usually inherently entangled, but can be separated by cutting. However, most cutting methods both cause damage to the nanotubes and involve a lengthy work-up procedure. The use of abrupt, repeated exposure to oxidising conditions in air proved to be an efficient (68% yield) means of producing material with open ends, moderate functionalisation, and enhanced solvent dispersibility; the average lengths were reduced from over 5 μm to approximately 650 nm. Additionally, the character of the surface oxides can be tuned to have either an acidic or basic character by using a simple thermal treatment. These approaches could be deliberately integrated into conventional CVD processes, but also have implications for the products of standard nanotube syntheses. Raman spectroscopy and electron microscopy were used to study the impact of cutting on the intrinsic graphitic structure and the length distribution. X-ray photoelectron spectroscopy was used to determine the extent of functionalisation. The cut carbon nanotubes were dispersed in dimethylformamide (DMF), a Lewis basic solvent, and chloroform, a Lewis acidic solvent, using mild sonication. Through the use of an experimentally determined extinction coefficient (ε = 35.10 ml mg⁻¹ cm⁻¹), the relative dispersibility of the cut and functionalised carbon nanotubes in DMF and chloroform was determined.     

Unambiguous atomic structural determination of single-walled carbon nanotubes by electron diffraction

We introduce a novel non-dimensional “intrinsic layer-line spacing” concept for electron diffraction analysis of single-walled carbon nanotubes (SWCNTs). Accordingly, we develop a unique method for direct determination of chiral indices (n, m) of the carbon nanotubes from their electron diffraction patterns (EDPs). The new method is totally calibration-free. Errors due to the nanotube inclination are specified. The tilt angle of the carbon nanotube with respect to the incident electron beam is simultaneously evaluated, thus the effect of the tube tilting is compensated for in the (n, m) determination. Several effective procedures are proposed to cross-check the results by using abundant information contained in the diffraction patterns. The efficiency of the method is demonstrated on both simulated and experimental diffraction patterns from single-walled nanotubes. The technique can be extended to structural analysis of nanotubes of structure similar to carbon nanotubes, such as boron nitride nanotubes.     

Radiation damage to multi-walled carbon nanotubes and their Raman vibrational modes

The influence of the radiation damage to multi-walled carbon nanotubes (MWCNT) during the high-energy electron irradiation (E_e = 1.8 MeV) with different doses of absorption (D_n = 0.5; 1.0; 1.5 and 2.0 MGy) on their Raman vibrational spectra is studied in detail. The modification of both radial and tangential optical vibrations is observed depending on radiation dose. This is manifested both in the frequency shifts of the vibrational modes and in a change in the intensity of the Raman scattering, which corresponds to different optical vibrations. This behavior of Raman spectrum is explained by appearance and increase in the concentration of radiation defects and by seams of separate layers of nanotubes.     

Decoration of carbon nanotubes with CdS nanoparticles by polythiophene interlinking for optical limiting enhancement

The sidewalls of multiwalled carbon nanotubes (MWCNTs) were decorated with CdS nanoparticles using a mild two-step approach, with in situ polymerized thiophene (PTh) acting as an interlinker. Extensive characterization of the materials has been carried out using transmission electron microscopy, selected area electron diffraction, X-ray diffraction, thermal gravimetric analysis, ultraviolet-visible absorption spectroscopy and photoluminescence spectroscopy. Optical limiting (OL) studies have been performed using the open Z-scan technique at the laser wavelengths of 532 and 1064 nm. The MWCNT-PTh-CdS system shows an enhanced OL effect in comparison to the pristine MWCNTs, particularly at 1064 nm. Possible underlying mechanisms are proposed based on the results of nonlinear scattering measurements.     

Distribution profile of water and suppression of methanol crossover in sulfonated polyimide electrolyte membrane for direct methanol fuel cells

We have developed novel cross-linked sulfonated polyimide (c-SPI) membrane as an electrolyte for direct methanol fuel cells (DMFCs). When the DMFC using the c-SPI membrane (thickness = 155 μm), Pt-Ru dispersed on carbon black (Pt-Ru/CB) anode and Pt/CB cathode with a Nafion^® ionomer was operated at 80 °C and 0.1 A cm⁻² with 1 M CH₃OH and oxygen (oxidant), the methanol crossover rate, j(CH₃OH), was suppressed to about 1/2 compared with that of the Nafion^® 117 membrane (thickness = 180 μm) with the same electrodes. It was found for both cells that the j(CH₃OH) was not so small as expected from the membrane thickness. In order to obtain a clue for the suppression of j(CH₃OH), the distribution profiles of water (containing CH₃OH) in thickness direction were investigated by measuring the specific resistances (ρ) between Pt probes inserted into the electrolyte membrane. Values of ρ at the anode side were low irrespective of the discharge current density, because such a part of the membrane was humidified thoroughly by liquid water (1 M CH₃OH) allowing free penetration of CH₃OH into the swollen polymer. In contrast, the values of ρ at the cathode side were high at the low current density due to drying of the membrane contacting with oxidant gas (O₂ or air) in low humidity. We have succeeded to suppress the j(CH₃OH) further (about 1/2 at 0.2 A cm⁻²) by using bilayer c-SPI, having a low ion exchanging (low swelling) barrier layer at the anode side without increasing the ohmic resistance, compared with that of the single c-SPI.     

Ultra-low electrical percolation threshold in carbon-nanotube-epoxy composites

Epoxy composites based on aligned CVD-grown multi-wall carbon nanotubes with weight fractions ranging from as low as 0.001 up to 1 wt% were produced. The resulting electrical properties were analysed by AC impedance spectroscopy. The composite conductivity σ follows a percolation scaling law of the form σ∝(p−p_c)^t with the critical mean concentration p_c to form a conductive network of approximately 0.0025 wt% and an exponent, t, of 1.2. The results are compared to previous studies investigating the percolation behaviour of entangled carbon nanotubes and spherical carbon black particles in the same matrix processed under similar conditions. The experimental percolation threshold for the aligned nanotubes used in this study represents the lowest threshold observed for carbon-nanotube-based polymer composites yet reported.     

Electrochemically multi-anodized TiO2 nanotube arrays for enhancing hydrogen generation by photoelectrocatalytic water splitting

An enhanced hydrogen production by photoelectrocatalytic water splitting was obtained using extremely highly ordered nanotubular TiO₂ arrays in this work. Highly ordered TiO₂ nanotube arrays with a regular top porous morphology were grown by a facile and green three-step electrochemical anodization. The well ordered hexagonal concaves were uniformly distributed on titanium substrate by the first anodization, served as a template for further growth of TiO₂ nanotubes. As a result, the TiO₂ nanotube arrays constructed through the third anodization showed appreciably more regular architecture than that of the sample by conventional single anodization under the same conditions. The enhanced photoelectrochemical activity was demonstrated through the hydrogen generation by photoelectrocatalytic water splitting, with an exact H₂ evolution rate up to 420 μmol h⁻¹ cm⁻² (10 mL h⁻¹ cm⁻²) in 2 M Na₂CO₃ + 0.5 M ethylene glycol. The photocurrent density of the third-step anodic TiO₂ nanotubes is about 24 mA cm⁻² in 0.5 M KOH, which is 2.2 times higher than that of the normal TiO₂ nanotubes (∼11 mA cm⁻²) by a single electrochemical anodization.     

Near-infrared photorefractive polymer composites based on carbon nanotubes

A photorefractive effect at the wavelength of 1064 nm is demonstrated for a composite consisting of an aromatic polyimide and carbon single wall nanotubes. The two-beam gain coupling coefficient and the net gain coefficient are equal to 90 and 65 cm⁻¹, respectively, at 80 V/μm for a nanocomposite containing 0.25 wt% crude nanotube material. The refractive index modulation measured at E₀ = 50 V/μm is close to Δn = 0.004.