共查询到20条相似文献,搜索用时 187 毫秒
1.
本文介绍了防爆电器设备用橡套电缆引入装置中压紧螺母的加工,因其无加工面作为加工的定位基准,按传统方法进行加工时,不能满足加工要求。应用了自定心膨胀夹具后,取得了很好效果。 相似文献
2.
3.
4.
1.前言曲轴是动力机械内燃机装置的关键部件之一。其加工质量对内燃机工作的可靠性及使用寿命有着重要的影响。长期以来,曲轴制造大多数是在普通车床上加工的,由于曲轴形状复杂台阶多,加工时要多次定位装夹,这学导致部件精度难于保证。经改进采用靠模法来加工曲轴,特点是有灵活性,且制造质量能满足技术设计要求。但靠模件的精度直接影响曲轴的精度,当参数变化欲加工新的曲轴时,则需要重新设计制造新的靠模,精度不高、周 相似文献
5.
尚丽萍 《电力标准化与技术经济》2003,12(2):22-25
依据国家与电力行业标准的要求,主要评定铂电阻温度计工作基准装置在ITS—90温标的定义固定点之一:锌凝固点的测量不确定度。评定的方法和结果可用于在该点使用标准铂电阻温度计建标、检定/校准及高精度测量的不确定度分析。 相似文献
6.
中小型电机机座加工工艺研究 总被引:2,自引:0,他引:2
在原有机座加工工艺的基础上,通过调整加工顺序,将定子铁心压入机座后以铁心内圆为基准找正后精车机座两端止口。此方法可减少机座装夹变形,提高机座止口圆度及同轴度的加工精度,消除机座加工、铁心制造时产生的误差对整机性能的影响。 相似文献
7.
8.
我公司模具厂的日本ITC-V80仿形铣床用于大型注塑模具加工,为了满足日益增加的模具加工的需要,进行了数控改造。 1.改造原因及数控系统简介 (1)改造原因 该铣床是用仿形头对有机玻璃靠模采集数据,经过一定比例的放大,来加工模具。但靠模制作较麻烦,而且加工出来的模具表面精度达不 相似文献
9.
基于宏程序的非圆曲线的数控精密加工 总被引:6,自引:0,他引:6
具有非圆曲线外形的零件形状复杂,传统的靠模加工法柔性差,不能满足机电元件类型多样化、产品更新换代快的要求。利用用户宏程序实现非圆曲线(仅限可用数学方程表达的曲线,列表曲线除外)的数控精密加工,很好地解决了这一难题,并给出源程序。 相似文献
10.
在数控加工中,虽然采用CAD/CAM自动编程在复杂零件加工中应用比较普遍,但手工编程在现代加工同样有其用武之地。比较自动编程,手工编制的程序可以更短小精悍,具有更强的可调性和可控性,这需要采用宏程序编制技术。本文以椭圆的轮廓加工、椭圆平面加工、椭圆球面凹槽加工为例,由浅入深的详细讲解各种椭圆加工的宏程序编制方法,说明宏程序在手工编制较为复杂零件的强大作用,抛砖引玉,用活宏程序。 相似文献
11.
关于水轮机导水机构导叶聚甲醛钢背复合材料轴套与轴颈配合间隙的选择 总被引:1,自引:1,他引:0
在综合国内外水轮机导叶轴套与轴颈公差配合和间隙选择的基础上,推荐聚甲醛钢背复合材料轴套与轴颈配合间隙选择的方法,对我国目前水轮机导叶轴颈尺寸公差的选择提出了意见。 相似文献
12.
《Industry Applications, IEEE Transactions on》2009,45(2):720-728
13.
高速永磁同步电机转子强度分析 总被引:9,自引:0,他引:9
为了对转子进行有效的冷却,在满足电机电磁性能的前提下,可通过减小保护套的厚度来尽可能增大定转子之间的气隙,因而必须对保护套和永磁体进行强度校核。将转子受力状况简化为平面应变问题,在此基础上推导出了两层过盈配合、三层过盈配合转子的应力场、应变场、位移场的解析公式,并利用有限元方法验证了解析公式的正确性。归纳了高速情况下热套式永磁转子强度设计准则,为转子的优化设计提供了理论依据。以一台额定转速120 kr/min、10 kW的高速永磁同步电机为例,给出了两种常用过盈配合高速电机转子的强度设计方法。 相似文献
14.
Ships are autonomous objects in which the capacity of the power plant and volume of available space are limited. Permanent-magnet machines with the maximum coefficient of efficiency and minimum mass and dimensions can be widely used on the ships, first of all, in high-power ship systems—generator sets, propulsion systems, and thrusters. However, there is a danger of fire during interturn faults in the stator winding in permanent-magnet machines. If such a fault occurs in the standard operating mode, then, when the rotor turns by inertia or, under the action of slowing water flow, moves to the propeller in the closed circuit of the stator winding, an electromotive force will be induced since the magnetic field of the rotor remains. This electromotive force will produce a current in the closed circuit, and a large amount of heat will be released in the winding-fault area, which can lead to a fire on the ship. This article considers a method of “damping” of the magnetic field in the rotor in an emergency situation. In this method, the magnetic system of the rotor is made of two parts, one of which is fixed on the rotor, while the second is installed on the rotary sleeve. In the normal condition of the machines, the angular positions of the analogous poles fixed on the rotor and installed on the rotary sleeve coincide. In the emergency condition of the machine, the sleeve turns so that the angular positions of the opposite poles of the rotor and sleeve coincide. As a result, the induction of the magnetic field in the gap and the electromotive force in the stator windings in the emergency condition of the machine will be close to zero. 相似文献
15.
Several steps are involved in predicting the temperature rise within the babbitt/oil film of sleeve bearings. Initially, the viscous friction loss developed in the oil film is determined. This loss depends on the speed, length, and diameter of the journal, oil viscosity, and diametral clearance. A heat balance study then compares heat loss generation and dissipation rates. The final consideration is the ability of the oil rings to deliver the necessary oil flow rate. An approach for predicting sleeve bearing temperature rise and the adequacy of oil ring lubrication is described. It is shown that some of the design variables affecting the bearing temperature rise also influence the bearing oil film stiffness. The value of this stiffness plays a vital role in determining the shaft critical speed. 相似文献
16.
17.
针对单向耦合法分析屏蔽式永磁同步电机电磁场和温度场时计算精度低的问题,提出了一种磁热双向耦合法。首先,建立了磁热耦合计算模型。其次,采用双向耦合法分析了屏蔽套材料对电机性能的影响,并与单向耦合计算结果进行了比较。最后,建立了电机三维模型,利用有限元软件进行了电磁场和三维温度场分析。研究结果表明所提的磁热双向耦合计算方法可以有效提高电磁场和温度场的计算精度,此外屏蔽套采用不导电不导磁材料可有效提高屏蔽式永磁同步电机效率,降低电机温升。这不仅为屏蔽式永磁同步电机的设计提供了参考,同时对于保证电机高效和可靠运行具有重要意义。 相似文献
18.
邹秀云 《电力系统保护与控制》1997,25(4):60-63
在电气连接中,采用接线座(端子)作为过渡连接是一种较为普遍的方法。在我国,在诸多的接线座结构中,通常采用板式压接导线和筒式压接导线这两种方法。本文通过对这两种压接线方式的比较分析,指出板式压接线方法的一些弊端,并推荐选择筒式结构的接线方法 相似文献
19.
20.
基于有限元法建立了轴承非线性油膜力求解模型。指出在轴颈位置固定情况下,轴承油膜力是转速和振动速度的线性函数。线性函数中包含的6个系数是轴颈偏心和偏位角的非线性函数,而这些系数可以通过文中建立的有限元模型获得。非线性函数关系采用结构化数据库和神经网络来表示。应用新模型可以非常方便地获得任意转速、位置和振动工况下的非线性油膜力。结合实例进行了分析,表明这种结构化表示方法可靠,物理意义明确。 相似文献