Constrained multi-objective optimization algorithm with an ensemble of constraint handling methods

Different constraint handling techniques have been used with multi-objective evolutionary algorithms (MOEA) to solve constrained multi-objective optimization problems. It is impossible for a single constraint handling technique to outperform all other constraint handling techniques always on every problem irrespective of the exhaustiveness of the parameter tuning. To overcome this selection problem, an ensemble of constraint handling methods (ECHM) is used to tackle constrained multi-objective optimization problems. The ECHM is integrated with a multi-objective differential evolution (MODE) algorithm. The performance is compared between the ECHM and the same single constraint handling methods using the same MODE (using codes available from http://www3.ntu.edu.sg/home/EPNSugan/index.htm). The results show that ECHM overall outperforms the single constraint handling methods.     

A hybrid multi-objective evolutionary algorithm for wind-turbine blade optimization

A concurrent-hybrid non-dominated sorting genetic algorithm (hybrid NSGA-II) has been developed and applied to the simultaneous optimization of the annual energy production, flapwise root-bending moment and mass of the NREL 5 MW wind-turbine blade. By hybridizing a multi-objective evolutionary algorithm (MOEA) with gradient-based local search, it is believed that the optimal set of blade designs could be achieved in lower computational cost than for a conventional MOEA. To measure the convergence between the hybrid and non-hybrid NSGA-II on a wind-turbine blade optimization problem, a computationally intensive case was performed using the non-hybrid NSGA-II. From this particular case, a three-dimensional surface representing the optimal trade-off between the annual energy production, flapwise root-bending moment and blade mass was achieved. The inclusion of local gradients in the blade optimization, however, shows no improvement in the convergence for this three-objective problem.     

A constrained optimization algorithm based on the simplex search method

In this article, a robust method is presented for handling constraints with the Nelder and Mead simplex search method, which is a direct search algorithm for multidimensional unconstrained optimization. The proposed method is free from the limitations of previous attempts that demand the initial simplex to be feasible or a projection of infeasible points to the nonlinear constraint boundaries. The method is tested on several benchmark problems and the results are compared with various evolutionary algorithms available in the literature. The proposed method is found to be competitive with respect to the existing algorithms in terms of effectiveness and efficiency.     

An orthogonal design based constrained evolutionary optimization algorithm

Solving constrained optimization problems (COPs) via evolutionary algorithms (EAs) has attracted much attention. In this article, an orthogonal design based constrained optimization evolutionary algorithm (ODCOEA) to tackle COPs is proposed. In principle, ODCOEA belongs to a class of steady state evolutionary algorithms. In the evolutionary process, several individuals are chosen from the population as parents and orthogonal design is applied to pairs of parents to produce a set of representative offspring. Then, after combining the offspring generated by different pairs of parents, non-dominated individuals are chosen. Subsequently, from the parent’s perspective, it is decided whether a non-dominated individual replaces a selected parent. Finally, ODCOEA incorporates an improved BGA mutation operator to facilitate the diversity of the population. The proposed ODCOEA is effectively applied to 12 benchmark test functions. The computational experiments show that ODCOEA not only quickly converges to optimal or near-optimal solutions, but also displays a very high performance compared with another two state-of-the-art techniques.     

Solving constrained optimization problems with hybrid particle swarm optimization

Constrained optimization problems (COPs) are very important in that they frequently appear in the real world. A COP, in which both the function and constraints may be nonlinear, consists of the optimization of a function subject to constraints. Constraint handling is one of the major concerns when solving COPs with particle swarm optimization (PSO) combined with the Nelder–Mead simplex search method (NM-PSO). This article proposes embedded constraint handling methods, which include the gradient repair method and constraint fitness priority-based ranking method, as a special operator in NM-PSO for dealing with constraints. Experiments using 13 benchmark problems are explained and the NM-PSO results are compared with the best known solutions reported in the literature. Comparison with three different meta-heuristics demonstrates that NM-PSO with the embedded constraint operator is extremely effective and efficient at locating optimal solutions.     

基于混合PSO算法的桁架动力响应优化

摘 要：本文针对以结构动力响应为约束,最小重量为目标的桁架拓扑优化问题,提出了一种将微粒群算法和优化准则法结合的混合PSO算法。利用优化准则法的迭代关系找出群体中适应度最好的微粒,将其作为特殊微粒,其他微粒的寻优采用PSO的基本进化规则,位移响应约束利用特殊微粒的灵敏度信息近似计算。算例的计算结果表明,混合PSO算法适用于受简谐荷载以及脉冲荷载作用桁架结构的拓扑优化。混合PSO的计算效率比PSO算法高,其优化效果比优化准则法好。     

Combining mutual information and stable matching strategy for dynamic evolutionary multi-objective optimization

It is reasonable to assume that the changing of the optimization environment is smooth when considering a dynamic multi-objective optimization problem. Learning techniques are widely used to explore the dependence structure to facilitate population re-initialization in evolutionary search paradigms. The aim of the learning techniques is to discover knowledge from history information, thereby to track the movement of the optimal front quickly through good initialization when a change occurs. In this article, a new learning strategy is proposed, where the main ideas are (1) to use mutual information to identify the relationship between previously found approximated solutions; (2) to use a stable matching mechanism strategy to associate previously found optimal solutions bijectively; and (3) to re-initialize the new population based on a kinematics model. Controlled experiments were carried out systematically on some widely used test problems. Comparison against several state-of-the-art dynamic multi-objective evolutionary algorithms showed comparable performance in favour of the developed algorithm.     

An effective hybrid cuckoo search and genetic algorithm for constrained engineering design optimization

This article presents an effective hybrid cuckoo search and genetic algorithm (HCSGA) for solving engineering design optimization problems involving problem-specific constraints and mixed variables such as integer, discrete and continuous variables. The proposed algorithm, HCSGA, is first applied to 13 standard benchmark constrained optimization functions and subsequently used to solve three well-known design problems reported in the literature. The numerical results obtained by HCSGA show competitive performance with respect to recent algorithms for constrained design optimization problems.     

Accelerating adaptive trade‐off model using shrinking space technique for constrained evolutionary optimization

Adaptive trade‐off model (ATM) is a constraint‐handling mechanism proposed recently. The main advantages of this model are its simplicity and adaptation. Moreover, it can be easily embedded into evolutionary algorithms for solving constrained optimization problems. This paper proposes a novel method for constrained optimization, which aims at accelerating the ATM using shrinking space technique. Eighteen benchmark test functions and five engineering design problems are used to test the performance of the method proposed. Experimental results suggest that combining the ATM with the shrinking space technique is very beneficial. The method proposed can promptly converge to competitive results without loss of the quality and the precision of the final results. Performance comparisons with some other state‐of‐the‐art approaches from the literature are also presented. Copyright © 2008 John Wiley & Sons, Ltd.     

用于结构优化设计的改进多目标群搜索算法

在多目标群搜索算法（multi-objective group search optimization, MGSO）基本原理的基础上,结合Pareto最优解理论,提出了基于约束改进的多目标群搜索算法（IMGSO）,并应用于多目标的结构优化设计．算法的改进主要有3个方面：第一,引入过渡可行域的概念来处理约束条件;第二,利用庄家法来构造非支配解集;最后,结合禁忌搜索算法和拥挤距离机制来选择发现者,以避免解集过早陷入局部最优,并提高收敛精度．采用IMGSO优化算法分别对平面和空间桁架结构进行了离散变量的截面优化设计,并与MGSO优化算法的计算结果进行了比较,结果表明改进的多目标群搜索优化算法IMGSO与MGSO算法相比具有更好的收敛精度.通过算例表明：IMGSO算法得到的解集中的解能大部分支配MGSO算法的解,在复杂高维结构中IMGSO算法的优越性更加明显,且收敛速度也有一定的提高,可有效应用于多目标的实际结构优化设计．     

Solving constrained optimization problems with a hybrid particle swarm optimization algorithm

This article presents a particle swarm optimization algorithm for solving general constrained optimization problems. The proposed approach introduces different methods to update the particle's information, as well as the use of a double population and a special shake mechanism designed to avoid premature convergence. It also incorporates a simple constraint-handling technique. Twenty-four constrained optimization problems commonly adopted in the evolutionary optimization literature, as well as some structural optimization problems are adopted to validate the proposed approach. The results obtained by the proposed approach are compared with respect to those generated by algorithms representative of the state of the art in the area.     

Effective multi-objective optimization with the coral reefs optimization algorithm

In this article a new algorithm for multi-objective optimization is presented, the Multi-Objective Coral Reefs Optimization (MO-CRO) algorithm. The algorithm is based on the simulation of processes in coral reefs, such as corals' reproduction and fight for space in the reef. The adaptation to multi-objective problems is a process based on domination or non-domination during the process of fight for space in the reef. The final MO-CRO is an easily-implemented and fast algorithm, simple and robust, since it is able to keep diversity in the population of corals (solutions) in a natural way. The experimental evaluation of this new approach for multi-objective optimization problems is carried out on different multi-objective benchmark problems, where the MO-CRO has shown excellent performance in cases with limited computational resources, and in a real-world problem of wind speed prediction, where the MO-CRO algorithm is used to find the best set of features to predict the wind speed, taking into account two objective functions related to the performance of the prediction and the computation time of the regressor.     

Hybrid evolutionary multi-objective optimization and analysis of machining operations

Evolutionary multi-objective optimization (EMO) has received significant attention in recent studies in engineering design and analysis due to its flexibility, wide-spread applicability and ability to find multiple trade-off solutions. Optimal machining parameter determination is an important matter for ensuring an efficient working of a machining process. In this article, the use of an EMO algorithm and a suitable local search procedure to optimize the machining parameters (cutting speed, feed and depth of cut) in turning operations is described. Thereafter, the efficiency of the proposed methodology is demonstrated through two case studies – one having two objectives and the other having three objectives. Then, EMO solutions are modified using a local search procedure to achieve a better convergence property. It has been demonstrated here that a proposed heuristics-based local search procedure in which the problem-specific heuristics are derived from an innovization study performed on the EMO solutions is a computationally faster approach than the original EMO procedure. The methodology adopted in this article can be used in other machining tasks or in other engineering design activities.     

Multidisciplinary design and optimization of an air launched satellite launch vehicle using a hybrid heuristic search algorithm

A multidisciplinary design and optimization strategy for a multistage air launched satellite launch vehicle comprising of a solid propulsion system to low earth orbit with the implementation of a hybrid heuristic search algorithm is proposed in this article. The proposed approach integrated the search properties of a genetic algorithm and simulated annealing, thus achieving an optimal solution while satisfying the design objectives and performance constraints. The genetic algorithm identified the feasible region of solutions and simulated annealing exploited the identified feasible region in search of optimality. The proposed methodology coupled with design space reduction allows the designer to explore promising regions of optimality. Modules for mass properties, propulsion characteristics, aerodynamics, and flight dynamics are integrated to produce a high-fidelity model of the vehicle. The objective of this article is to develop a design strategy that more efficiently and effectively facilitates multidisciplinary design analysis and optimization for an air launched satellite launch vehicle.     

Efficient hybrid evolutionary algorithm for optimization of a strip coiling process

This article proposes an efficient metaheuristic based on hybridization of teaching–learning-based optimization and differential evolution for optimization to improve the flatness of a strip during a strip coiling process. Differential evolution operators were integrated into the teaching–learning-based optimization with a Latin hypercube sampling technique for generation of an initial population. The objective function was introduced to reduce axial inhomogeneity of the stress distribution and the maximum compressive stress calculated by Love's elastic solution within the thin strip, which may cause an irregular surface profile of the strip during the strip coiling process. The hybrid optimizer and several well-established evolutionary algorithms (EAs) were used to solve the optimization problem. The comparative studies show that the proposed hybrid algorithm outperformed other EAs in terms of convergence rate and consistency. It was found that the proposed hybrid approach was powerful for process optimization, especially with a large-scale design problem.     

Optimum plate-fin heat sinks by using a multi-objective evolutionary algorithm

This article demonstrates the practical applications of a multi-objective evolutionary algorithm (MOEA) namely population-based incremental learning (PBIL) for an automated shape optimization of plate-fin heat sinks. The computational procedure of multi-objective PBIL is detailed. The design problem is posed to find heat sink shapes which minimize the junction temperature and fan pumping power while meeting predefined constraints. Three sets of shape design variables used in this study are defined as: vertical straight fins with fin height variation, oblique straight fins with steady fin heights, and oblique straight fins with fin height variation. The optimum results obtained from using the various sets of design variables are illustrated and compared. It can be said that, with this sophisticated design system, efficient and effective design of plate-fin heat sinks is achievable and the best design variables set is the oblique straight fins with fin height variation.     

Constrained multi-objective optimization of EDM process parameters using kriging model and particle swarm algorithm

This paper investigates the highly nonlinear relationship between process parameters and machining responses, including material removal rate (MRR), surface roughness (SR), and electrode wear rate (EWR) of electric discharge machining (EDM) using Kriging model. Subsequently, an emerging multi-objective optimization algorithm called particle swarm is used to determine the best machining conditions that not only maximize the machining speed but also minimize the EWR with a constraint of the SR. The experiment was carried out with P20 steel on a CNC EDM machine using copper electrode. The research result shows that the MRR increases sharply when increasing the discharge current just like other researches pointed out. However, the relationship between EWR and current is complicated. EWR appears the minimum value when the current is around 30?A. The speed of change of MRR per unit of EWR is the highest when the SR is around 14.5?µm. The combination of Kriging regression model and particle swarm optimization is considered as an intelligent process modeling and optimization of EDM machining. The proper selection of process parameters helps the EDM operator to reduce the machining time and cost.     

Multi-objective optimization of a low specific speed centrifugal pump using an evolutionary algorithm

This paper describes the shape optimization of a low specific speed centrifugal pump at the design point. The target pump has already been manually modified on the basis of empirical knowledge. A genetic algorithm (NSGA-II) with certain enhancements is adopted to improve its performance further with respect to two goals. In order to limit the number of design variables without losing geometric information, the impeller is parametrized using the Bézier curve and a B-spline. Numerical simulation based on a Reynolds averaged Navier–Stokes (RANS) turbulent model is done in parallel to evaluate the flow field. A back-propagating neural network is constructed as a surrogate for performance prediction to save computing time, while initial samples are selected according to an orthogonal array. Then global Pareto-optimal solutions are obtained and analysed. The results manifest that unexpected flow structures, such as the secondary flow on the meridian plane, have diminished or vanished in the optimized pump.     

采用混合粒子群算法实现匹配追踪算法

针对匹配追踪信号稀疏分解的巨大计算量问题,在具有全局优化能力的粒子群算法基础上,提出了一种结合BFGS(Broyden、Fletcher、Goldfarb和Shanno)方法和变异操作的混合粒子群算法实现信号匹配追踪分解。利用BFGS方法增强了算法的局部开发能力,加快了信号特征提取速度;通过变异操作控制种群多样性以避免早熟收敛,增强了算法全局探测能力,提高了信号特征提取精度。通过与单一粒子群算法和遗传算法实现仿真信号匹配追踪分解的结果进行对比,证明了使用混合粒子群算法的匹配追踪分解能够快速准确提取信号特征参数。最后,将该算法应用于某内圈损伤轴承振动信号中的冲击特征提取,结果表明该算法在工程应用中具有一定的准确性和实用性。     

Inverse identification of elastic properties of composite materials using hybrid GA-ACO-PSO algorithm

The main emphasis of this paper is placed on the effectiveness of the proposed optimization method in material identification. The primary motivation of integrating GA, ACO and PSO is to minimize each other’s weaknesses and to promote respective strengths. In the proposed algorithm, the effect of random initialization of GA is subdued by passing the products of GA through the ACO and PSO operators to well organize the exploitative and exploratory search coverage. In return, GA improves the convergence rate and alleviates the strong dependency on the pheromone array in ACO as well as resolves the conflict arisen in identifying the trade-off parameter and further refine the exploitative search of PSO with the introduction of two-point standard mutation and one-point refined mutation. The proposed algorithm has been verified and applied in composite material identification with absolute percentage errors between measured and evaluated natural frequencies not more than 2%.