用二维FTIR研究纳米TiO2改性丝素蛋白聚集态结构转变

采用溶胶-凝胶方法制备纳米TiO₂复合丝素膜。UV和SEM测试结果表明,该丝素膜中纳米TiO₂均匀分散在丝素中,TiO₂粒径约为80 nm;同时采用一维红外光谱、二维红外相关光谱对纯丝素膜及复合丝素膜结构进行表征。结果表明,随着纳米TiO₂的生成,丝素蛋白中弱氢键缔合的N—H键以及自由的N—H键发生断裂及重组,生成了强氢键;丝素分子从无序状态转变为有序排列,同时无规线团构象及α螺旋构象向β折叠构象发生转变,最后促使丝素蛋白的结晶构象从Silk Ⅰ转变为Silk Ⅱ。     

负载型TiO2 制备及其对茜素红的降解研究

以钛酸四丁酯和正硅酸乙酯为前驱体、冰醋酸为水解抑制剂，用溶胶-凝胶法制备纳米TiO₂/SiO₂复合物。通过X-射线衍射、红外光谱和比表面积仪等测试手段进行了分析，结果表明，纳米TiO₂ /SiO₂粒子焙烧后主要以锐钛型存在，有Ti—O—Si键的产生，复合粒子的比表面积达到389 m²·g^－1。光催化结果表明，n(Ti)∶n(Si)=3和焙烧温度为700 ℃的TiO₂/SiO₂粒子对茜素红溶液的降解性能最好。利用气质联用仪对降解产物进行了分析。     

反相微乳液法制备TiO2/ZrO2复合陶瓷膜

研究了采用反相微乳液法制备TiO₂/ ZrO₂复合微乳液,并以其作为前体制得TiO₂/ ZrO₂复合膜。通过对复合微乳液的透射电镜测试,结果表明TiO₂/ ZrO₂复合微粒在油相包裹的“水池”中生成。由扫描电子显微镜观察到TiO₂/ ZrO₂复合膜表面微粒以棒状形式分布,而且复合膜对大肠杆菌的灭菌率达98 %～99 %。     

纳米TiO2在有机材料上的固定化研究进展

对纳米TiO₂在有机材料上的固定化研究进展进行了概述，并就光催化氧化对有机材料的降解等问题进行了讨论。主要介绍了光活性纳米TiO₂的制备方法、纳米TiO₂在有机材料上的固定化方法、纳米TiO₂对有机膜的降解以及纳米TiO₂/有机复合材料的应用领域，并对纳米TiO₂在抗菌方面的应用前景进行了阐述。     

环己烷直接氧化制丁二酸酐催化剂结构与催化性能研究

以气态环己烷催化氧化脱氢制丁二酸酐为目标反应，采用溶胶-凝胶法制备以TiO₂-Al₂O₃为复合载体的系列纳米催化剂，借助DTA-TG、FT-IR、TEM和XRD等测试手段对载体及其催化剂进行表征， 并进行活性评价。结果表明，复合载体中TiO₂基本上没有破坏γ-Al₂O₃的骨架结构，载体中的Al₂O₃和载体上V₂O₅的添加均能改变TiO₂的晶型转型温度。AlO与Ti—O相互作用后形成Al—O…Ti—O。在晶型转变的同时，可以实现V⁵⁺向V⁴⁺的转变，添加P₂O₅后，可以改变V⁵⁺/V⁴⁺。晶格氧是实现目标反应的供氧中心，V⁵⁺和V⁴⁺是其脱氢中心，当两种活性中心匹配时，可获得较高的转化率和选择性。     

TiO2/SiO2的制备及其对茜素红溶液的降解动力学

以钛酸四丁酯和正硅酸乙酯为前驱体，冰醋酸为水解抑制剂，采用溶胶-凝胶法制备了TiO₂/SiO₂复合物。X射线衍射和红外光谱等表征结果表明，纳米TiO₂/SiO₂粒子焙烧后主要以锐钛型存在，有Ti—O—Si键产生。在实验浓度范围，光催化降解茜素红反应符合一级动力学规律，采用半衰期法确定反应级数为0.82。     

纳米TiO2/P(MMA-BA-MAA)复合粒子的制备及聚合动力学

用乳液聚合法制备了纳米TiO₂/甲基丙烯酸甲酯-丙烯酸丁酯-甲基丙烯酸共聚物［TiO₂/P(MMA-BA-MAA)］复合粒子。考察了乳化剂的浓度、单体的用量比对复合粒子形貌的影响。系统研究了乳化剂浓度、引发剂用量、单体用量比、共乳化剂浓度、反应温度对TiO₂/P(MMA-BA-MAA)复合粒子包覆反应动力学影响。用TEM、FTIR及TG分析等证实P(MMA-BA-MAA)包覆在TiO₂表面形成表面光滑、分散性好的球形核 壳复合粒子。根据动力学实验结果,求出整个乳液聚合包覆反应的反应速率方程,反应的表观活化能为163.0 kJ.mol^-1。推测可能的包覆反应机理应为无机纳米TiO₂表面吸附乳化剂分子形成所谓的TiO₂/surfactant胶束成核或均相凝聚成核。TG结果显示,复合粒子的热稳定性高于相同条件下得到的共聚物的稳定性。ζ电位、接触角实验表明,与纳米TiO₂相比,复合粒子亲水性能下降、亲油性能提高。     

纳米TiO2/P(MMA-BA-MAA)复合粒子的制备及聚合动力学

用乳液聚合法制备了纳米TiO₂/甲基丙烯酸甲酯-丙烯酸丁酯-甲基丙烯酸共聚物［TiO₂/P(MMA-BA-MAA)］复合粒子。考察了乳化剂的浓度、单体的用量比对复合粒子形貌的影响。系统研究了乳化剂浓度、引发剂用量、单体用量比、共乳化剂浓度、反应温度对TiO₂/P(MMA-BA-MAA)复合粒子包覆反应动力学影响。用TEM、FTIR及TG分析等证实P(MMA-BA-MAA)包覆在TiO₂表面形成表面光滑、分散性好的球形核 壳复合粒子。根据动力学实验结果,求出整个乳液聚合包覆反应的反应速率方程,反应的表观活化能为163.0 kJ.mol^-1。推测可能的包覆反应机理应为无机纳米TiO₂表面吸附乳化剂分子形成所谓的TiO₂/surfactant胶束成核或均相凝聚成核。TG结果显示,复合粒子的热稳定性高于相同条件下得到的共聚物的稳定性。ζ电位、接触角实验表明,与纳米TiO₂相比,复合粒子亲水性能下降、亲油性能提高。     

乙醇在SnO2掺杂的TiO2-Pt复合纳米催化剂上的电催化氧化

通过溶胶凝胶和电沉积法制备了SnO₂掺杂的钛基纳米TiO₂-Pt（nano-TiO₂-Pt）复合纳米催化剂。XRD和SEM的研究结果表明,SnO₂的掺杂改变了TiO₂的结构。通过对它们的电化学性质的比较发现,SnO₂的掺杂使nano-TiO₂-Pt复合纳米催化剂的电化学活性表面积增加,常温常压下对乙醇的电化学氧化电位负移,氧化能力明显提高。     

Ag/TiO2光催化降解茜素红

以钛酸四丁酯为前驱体,冰醋酸为水解抑制剂,用溶胶-凝胶法制备了纳米Ag/TiO₂复合催化剂,测定了催化剂对茜素红溶液的光降解活性。结果表明,Ag/TiO₂催化剂具有较高的光催化活性。     

Study on secondary structural transition of nano‐TiO2 modified silk fibroin composite films by two‐dimensional Raman correlation spectroscopy and solid‐state 13C‐NMR spectroscopy

By a sol–gel processing, the nano‐TiO₂/silk fibroin (SF) composite films were prepared. One‐dimensional (1D) Raman, two‐dimensional (2D) correlation Raman spectroscopy, and ¹³C cross‐polarization magic‐angle‐spinning nuclear magnetic resonance (¹³C CP‐MAS NMR) were used to characterize the structural evolution of SF as the nano‐TiO₂ content increased from 0 to 0.4 wt%. The experimental data demonstrated that the secondary structures in the pure SF film and nano‐TiO₂/silk fibroin (SF) composite films were random coil, α‐helix and β‐sheet structures. The nano‐TiO₂ particles formed in the SF films might induce partial structural transitions from random coil and Silk I (α‐helix) to Silk II (β‐sheet). The transition identified by 2D‐Raman correlation spectra was the following order: silk I‐like structure, silk I (α‐helical structure), Silk II‐like structure, and Silk II (β‐sheet structure). POLYM. COMPOS., 36:121–127, 2015. © 2014 Society of Plastics Engineers     

Study on the properties of nano‐TiO2 particles modified silk fibroin porous films

Using the freeze‐drying method, Nano‐TiO₂/silk fibroin porous films were synthesized with different ratios of TiO₂ to silk fibroin solution. Through scanning electron microscopy (SEM), X‐ray diffraction (XRD), thermogravimetric analysis (TGA), tensile strain, and water‐solubility tests, the structures and properties of these porous films were characterized. The SEM results indicated that the pores of the nano‐TiO₂/silk fibroin porous films were uniformly distributed by the freeze‐drying method. The XRD analysis indicated that the formation of nano‐TiO₂ particles might induce a conformational transition of silk fibroin from the typical Silk I to the typical Silk II structure partly with an increase in the crystallinity of the porous films. Compared with the pure silk fibroin porous films, the mechanical properties of nano‐TiO₂/silk fibroin porous films were improved, and its heat transition temperature was also enhanced; however, the water‐solubility of this material was diminished. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Silk I structure formation through silk fibroin self-assembly

Regenerated silk fibroin films are normally produced by increasing the Silk II structure (β-sheet content). In the present study, silk fibroin films were prepared by controlling the environmental temperature and humidity, resulting in the formation of silk films with a predominant Silk I structure instead of Silk II structure. Wide angle X-ray diffraction indicated that when the relative humidity was 55%, the silk films prepared were mainly composed of Silk I structure, whereas silk films formed on other relative humidity had a higher Silk II structure. Fourier transform infrared analysis (FTIR) results also conformed that the secondary structure of silk fibroin can be controlled by changing the humidity of the films formed process. Thermal analysis results revealed Silk I structure was a stable crystal, and the degradation peak increased to 320°C, indicating a greater thermal stability of these films formed under the 55% relative humidity conditions. Atomic force microscopy (AFM) results depicted silk fibroin in the fresh solution had many nanospheres existing with 20–50 nm diameters and mainly maintained a random coil structure without specific nanostructures. At the same time, it also illustrated the self-assembly process of silk fibroin in the aqueous solution without any human intervention. In addition, this present study also provided additional support for self-assembly mechanism of silk fibroin films formation. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Self-assembled silk fibroin particles: Tunable size and appearance

Silk fibroin had various applications especially outstanding for drug delivery due to its protein component, biocompatibility and biodegradability. In this paper, silk fibroin particles were prepared via self-assembly. Their sizes and appearances could be modified by adjusting of volume ratios among poly vinyl alcohol (PVA), silk fibroin and ethanol. Regular silk particles were formed in PVA solution when the volume ratio of silk to ethanol ranged from 2 to 20. Preparation pathways could be concluded as 1) mixing ethanol with silk fibroin solution, 2) blending the silk fibroin/ethanol solution with PVA, 3) freezing the ternary solution for 48 h and collection of silk fibroin particles via thaw and centrifugation. Silk particles with various appearances were also obtained by addition of concentrated PVA solution. Silk particles reported have potential as drug delivery carriers in a variety of biomedical applications.     

Effect of nano-SiO2 on the compatibility of PVA/RSF blend

A series of poly(vinyl alcohol) (PVA)/regenerated silk fibroin (RSF)/nano-silicon dioxide (nano-SiO₂) blend films were prepared by solution casting method, in which nano-SiO₂ was obtained via sol?Cgel process. The structure, properties, and morphology of the films related to the compatibility were investigated by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). XRD peaks of PVA/RSF/nano-SiO₂ (1.0?wt?%) blends decreased in intensity indicated that formation of PVA and RSF crystal lattices was hindered by nano-SiO₂ particles. FTIR spectroscopy analysis of PVA/RSF/nano-SiO₂ films confirmed that both Si?CO?CC linkage and hydrogen bonding were formed among PVA, RSF, and nano-SiO₂. SEM showed that there was no obvious phase separation in PVA/RSF/nano-SiO₂ (1.0?wt?%) film although small uniform blur particles can still be found. In addition, TEM showed nano-particles were well dispersed through the PVA/RSF polymer matrix. Besides, the observed shift in glass transition temperatures (T _g) and improvement in thermal properties of composite films suggested the enhanced compatibility due to interfacial bonding and intermolecular interactions. Therefore, these results indicated that the compatibility of PVA/RSF was improved effectively by the addition of nano-SiO₂.     

Mechanical properties of silk fibroin–microcrystalline cellulose composite films

Silk fibroin–microcrystalline cellulose (cellulose whisker) composite films with varied compositions were prepared by casting mixed aqueous solution/suspensions of the two components. Silk fibroin was dissolved in 10M LiSCN followed by dialysis; a cellulose whisker suspension was prepared by sulfuric acid hydrolysis of tunicate cellulose. Macroscopically homogeneous films were obtained at all mixing ratios. While the Young's modulus of the composite films showed a linear, additive dependence on the mixing ratio, the tensile strength and ultimate strain showed a maximum at a 70–80% cellulose content, reaching five times those of fibroin‐alone or cellulose‐alone films. At the same mixing ratio, infrared spectra of the composite films showed a shift of the amide I peak from 1654 to 1625 cm^?1, indicating the conformational change of fibroin from a random coil to a β structure (silk II) at the whisker–matrix interface. This change seems to be induced by contact of fibroin molecules with a highly ordered surface of cellulose whisker. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3425–3429, 2002     

新型丝素复合膜的微结构表征及热稳定性

基于丝素的高分子复合材料可以广泛地应用于组织工程、生物医药和半导体材料等领域。通过物理-共混技术制备了一种新型生物高分子丝素/聚乳酸复合膜。利用扫描电镜、傅里叶红外光谱、拉曼光谱、X射线衍射和热分析技术对其形貌、结构和相态组分以及热稳定性进行了表征,探究了不同比例复合膜的微结构、相互作用机理和热稳定性。结果表明：随着丝素含量的增加,复合膜中的β-折叠含量增多,α-螺旋和无规卷曲含量减少,玻璃化转变温度提高;由于丝素与聚乳酸间的相互作用,提高了复合膜的热稳定性。     

Chemical,Thermal, Time,and Enzymatic Stability of Silk Materials with Silk I Structure

The crystalline structure of silk fibroin Silk I is generally considered to be a metastable structure; however, there is no definite conclusion under what circumstances this crystalline structure is stable or the crystal form will change. In this study, silk fibroin solution was prepared from B. Mori silkworm cocoons, and a combined method of freeze-crystallization and freeze-drying at different temperatures was used to obtain stable Silk I crystalline material and uncrystallized silk material, respectively. Different concentrations of methanol and ethanol were used to soak the two materials with different time periods to investigate the effect of immersion treatments on the crystalline structure of silk fibroin materials. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman scattering spectroscopy (Raman), Scanning electron microscope (SEM), and Thermogravimetric analysis (TGA) were used to characterize the structure of silk fibroin before and after the treatments. The results showed that, after immersion treatments, uncrystallized silk fibroin material with random coil structure was transformed into Silk II crystal structure, while the silk material with dominated Silk I crystal structure showed good long-term stability without obvious transition to Silk II crystal structure. α-chymotrypsin biodegradation study showed that the crystalline structure of silk fibroin Silk I materials is enzymatically degradable with a much lower rate compared to uncrystallized silk materials. The crystalline structure of Silk I materials demonstrate a good long-term stability, endurance to alcohol sterilization without structural changes, and can be applied to many emerging fields, such as biomedical materials, sustainable materials, and biosensors.     

用相转移法有机表面改性纳米TiO2

以正辛基三乙氧基硅烷（LM-N308）为有机表面改性剂,用相转移法对金红石相纳米TiO₂进行有机表面改性。采用了傅里叶变换红外光谱（FTIR）、热分析（TG-DTA）、X 射线光电子能谱（XPS）、高分辨透射电镜（HRTEM）、亲油化度实验等对所得的纳米TiO₂进行了表征。红外光谱和X射线光电子能谱表明LM-N308以化学键合的方式结合在纳米TiO₂表面。HRTEM结果显示,在纳米TiO₂的表面存在厚度均匀约2 nm的有机包覆层。TG和亲油化度实验数据表明,纳米TiO₂表面化学吸附的LM-N308的饱和质量分数为7.0%～9.7%。分散性实验表明,经LM-N308表面改性的纳米TiO₂由亲水性变成了疏水性。