Hybrid biosorbent: An innovative matrix to enhance the biosorption of Cd(II) from aqueous solution

To enhance the metal removing capacity of a fungus biosorbent, a new idea of producing a hybrid biosorbent (HB) matrix by combining two different biosorbents using a simple and low-cost immobilization technique was tested for the sorption of Cd(II). The two biosorbents, used as the building block for the production of HB matrix, were the fungal biomass of Phanerochaete chrysosporium (B1) and fibrous network of papaya wood (B2). Maximum independent biosorption capacity of B1 and B2 was noted, respectively, to be 71.36 and 17.62 mgCd(II)g(-1) biosorbent. However, when two biosorbents were hybridized to form HB matrix, the combined biosorption capacity (141.63 mgCd(II)g(-1) biosorbent) was increased by 98.47, 703.80%, respectively, as compared to the ability of B1 and B2 when used alone, and by 59.17% than the sum of separate individual abilities of biosorbents B1 and B2. The kinetics of equilibrium was fast, approximately 88% of Cd(II) biosorption taking place within 30 min. Biosorption kinetics and equilibria followed the pseudo-second order kinetics and Langmuir adsorption isotherms model. HB matrix was also shown to be highly effective in removing Cd(II) from aqueous solution in a continuous flow fixed-bed column bioreactor, both in batch and repeated cycles.     

Biosorption of Reactive Black 5 dye by Penicillium restrictum: the kinetic study

Biosorption of Reactive Black 5 (RB 5) dye onto dried Penicillium restrictum biomass was studied with respect to pH, contact time, biosorbent and dye concentrations. The effect of temperature on the biosorption efficiency was also carried out and the kinetic parameters were determined. Optimum initial pH, equilibrium time and biomass concentration for RB 5 dye were found to be 1.0, 75 min and 0.4 g dm(-3) at 20 degrees C, respectively. The maximum biosorption capacities (q(max)) of RB 5 dye onto dried P. restrictum biomass were 98.33 and 112.50mg (g biomass)(-1) at 175 mg dm(-3) initial dye concentration at 20 and 50 degrees C, respectively, and it was 142.04 mg (g biomass)(-1) at 200 mg dm(-3) initial dye concentration at 35 degrees C. The results indicate that the biosorption process obeys a pseudo-second-order kinetic model.     

Removal and recovery of nickel(II) from aqueous solution by loofa sponge-immobilized biomass of Chlorella sorokiniana: characterization studies

The biosorption process for the removal of nickel(II) by loofa sponge-immobilized biomass of Chlorella sorokiniana (LIBCS), a newly developed immobilized biosorbent, was characterized. Effects of environmental factors on metal uptake capacity of LIBCS were studied and compared with free biomass of C. sorokiniana (FBCS). Nickel(II) removal by LIBCS was found to be influenced by pH of the solution, initial metal concentration, and biomass concentration. The biosorption of nickel(II) ions by both LIBCS and FBCS increased as the initial concentration of nickel(II) ions increased in the medium. No loss to biosorption capacity of LIBCS for nickel(II) was found due to the presence of loofa sponge, indeed as compared to FBCS an increase of 25.3% was noted in the biosorption capacity of LIBCS. Maximum biosorption capacities for FBCS and LIBCS were found as 48.08 and 60.38 mg nickel(II)/g, respectively, whereas the amount of nickel(II) ions adsorbed on the plain loofa sponge was 6.1mg/g. During these biosorption studies, LIBCS exhibited excellent physical and chemical stability without any significant release/loss of microalgal biomass from loofa sponge matrix. The kinetics of nickel(II) removal was extremely fast reaching at equilibrium in about 15 min for LIBCS and 20 min for FBCS. The biosorption equilibrium was well described by the Langmuir and Freundlich adsorption isotherms. The biosorption capacities were found to be solution pH dependent and the maximum adsorption was found at a solution pH 4-5. The LIBCS could be regenerated using 75 mM HCl, with up to 98% recovery. The LIBCS were shown to be robust and stable with little decrease in the nickel(II) uptake capacity when used in consecutive seven biosorption-desorption cycles. Continuous removal of nickel(II) from electroplating effluent by LIBCS packed in fixed bed column bioreactor confirm the possibility of developing a biological treatment process for the removal of toxic metals from authentic wastewater.     

Biosorption of lead, copper and cadmium by an indigenous isolate Enterobacter sp. J1 possessing high heavy-metal resistance

This study was undertaken to investigate biosorption kinetics and equilibria of lead (Pb), copper (Cu) and cadmium (Cd) ions using the biomass of Enterobacter sp. J1 isolated from a local industry wastewater treatment plant. Efficiency of metal ion recovery from metal-loaded biomass to regenerate the biosorbent was also determined. The results show that Enterobacter sp. J1 was able to uptake over 50mg of Pb per gram of dry cell, while having equilibrium adsorption capacities of 32.5 and 46.2mg/g dry cell for Cu and Cd, respectively. In general, Langmuir and Freundlich models were able to describe biosorption isotherm fairly well, except that prediction of Pb adsorption was relatively poor with Langmuir model, suggesting a different mechanism for Pb biosorption. Adjusting the pH value to 3.0 led to nearly complete desorption of Cd from metal-loaded biomass, while over 90% recovery of Pb and Cu ions was obtained at pH相似文献   

Kinetic and equilibrium studies of methylene blue biosorption by Posidonia oceanica (L.) fibres

Batch biosorption experiments were carried out for the removal of methylene blue, a basic dye, from aqueous solution using raw Posidonia oceanica (L.) fibres, a marine lignocellulosic biomass. A series of assays were undertaken to assess the effect of the system variables, i.e. contact time, solution pH, biosorbent dosage and initial dye concentration. The results had showed that biosorption capacity was optimal using 6-9 solution pH range and by increasing the biosorbent concentration up to 1 g/L. The biosorption kinetics were analyzed using irreversible-first-order, reversible-first-order and pseudo-second-order and the sorption data were very well described by the pseudo-second-order model for the entire adsorption time with squared correlation coefficients equal to unity for all experimented initial dye concentrations. Besides, equilibrium data were very well represented by both Langmuir and Redlich-Peterson isotherm models followed by Freundlich, which confirm the monolayer coverage of methylene blue molecules onto P. oceanica fibres.     

Biosorption of Acid Red 274 (AR 274) on Enteromorpha prolifera in a batch system

The biosorption of Acid Red 274 (AR 274) dye on Enteromorpha prolifera, a green algae grown on Mersin costs of the Mediterranean, Turkey, was studied as a function of initial pH, temperature, initial dye and biosorbent concentration. The experiments were conducted in a batch manner. The Langmuir and Freundlich isotherms were used for modelling the biosorption equilibrium. At optimum temperature 30 degrees C and initial pH 2.0-3.0, the Langmuir isotherm fits best to the experimental equilibrium data with a maximum monolayer coverage of 244 mg/g. The equilibrium AR 274 concentration of the exit stream of a single batch was also obtained by using the experimental equilibrium curve and operating line graphically. The pseudosecond-order kinetic model and Weber-Morris model were applied to the experimental data and it was found that both the surface adsorption as well as intraparticle diffusion contribute to the actual adsorption process. The biosorption process follows a pseudosecond-order kinetics and activation energy was determined as -4.85 kJ/mol. Thermodynamic studies showed that the biosorption of AR 274 on E. prolifera is exothermic and spontaneous in nature.     

Biosorption of copper(II) by nonliving lichen biomass of Cladonia rangiformis hoffm

Biosorption of heavy metals can be an effective process for the removal of heavy metal ions from aqueous solutions. In this study, the adsorption properties of lichen biomass of Cladonia rangiformis hoffm. for copper(II) were investigated by using batch adsorption techniques. The effects of initial metal ion concentration, initial pH, biosorbent concentration, stirring speed and contact time on biosorption efficiency were studied. In the experiments the optimum pH value was found out 5.0 which was the native pH value of solution. The experimental adsorption data were fitted to the Langmuir adsorption model. The highest metal uptake was calculated from Langmuir isotherm and found to be 7.6923 mg Cu(II)/g inactivated lichen at 15 degrees C. The results indicated that the biomass of C. rangiformis is a suitable biosorbent for removing Cu(II) from aqueous solutions.     

Biosorption of copper ions from aqueous solution by Codium vermilara: Optimization,kinetic, isotherm and thermodynamic studies

In this investigation, the efficiency of Codium vermilara for copper ions removal from aqueous solution was studied. Central Composite Design has been used for the Response Surface Methodology and has been found to be an effective method for investigating the influences of various variables and their interactions on the efficiency of Cu²⁺ ions removal. The interactive impacts of four variables: algal dose, pH, initial concentrations of copper and contact time on the copper removal efficiency were assessed. Algal dose 0.75 g/L, pH 5.28, contact time 70.51 min, and copper concentration 48.75 mg/L were found to be the conditions of optimum biosorption. The efficiency of copper removal was found to be 85.5% under these optimum conditions. Copper removal on the biomass of C. vermilara followed well the kinetics of pseudo-first-order, Elvoish and Intraparticle diffusion. Compared to the other models, Dubinin-Radushkevich isotherm best suited the experimental data revealing that the adsorption mechanism was physical adsorption. Thermodynamic parameters exhibited non-spontaneous, randomness and endothermic biosorption of Cu²⁺ ions. Additionally, the biosorbent characterization was estimated by scanning electron microscopy and Fourier transform infrared analysis. Thus, C. vermilara could be used as possible biosorbent for removing heavy metals and other pollutants from the environment.     

Biosorption of lead from aqueous solutions by green algae Spirogyra species: kinetics and equilibrium studies

Biosorption is the effective method for the removal of heavy metal ions from wastewaters. Results are presented showing the sorption of Pb(II) from solutions by biomass of commonly available, filamentous green algae Spirogyra sp. Batch experiments were conducted to determine the biosorption properties of the biomass and it was observed that the maximum adsorption capacity of Pb(II) ion was around 140mgmetal/g of biomass at pH 5.0 in 100min with 200mg/L of initial concentration. Temperature change in the range 20-40 degrees C affected the adsorption capacity and the nature of the reaction was found to be endothermic in nature. Uptake kinetics follows the pseudo-second-order model and equilibrium is well described by Langmuir isotherm. Isotherms have been used to determine thermodynamic parameters of the process, viz., free energy change, enthalpy change and entropy change. Various properties of the algae, as adsorbent, explored in the characterization part were chemical composition of the adsorbent, thermal analysis by TGA, surface area calculation by BET method, surface morphology with scanning electron microscope images and surface functionality by FTIR. FTIR analysis of algal biomass revealed the presence of amino, carboxyl, hydroxyl and carbonyl groups, which are responsible for biosorption of metal ions. The results indicated that the biomass of Spirogyra sp. is an efficient biosorbent for the removal of Pb(II) from aqueous solutions.     

Biosorption of zinc from aqueous solution using Azadirachta indica bark: equilibrium and kinetic studies

The removal of zinc ions from aqueous solutions on the biomass of Azadirachta indica bark has been studied by using batch adsorption technique. The biosorption studies were determined as a function of contact time, pH, initial metal ion concentration, average biosorbent size and biosorbent dosage. The equilibrium metal uptake was increased and percentage biosorption was decreased with an increase in the initial concentration and particle size of biosorbent. The maximum zinc biosorption occurred at pH 6 and percentage biosorption increases with increase in the biosorbent dosage. Experimental data obtained were tested with the adsorption models like Langmuir, Freundlich and Redlich-Peterson isotherms. Biosorption isothermal data were well interpreted by Langmuir model with maximum biosorption capacity of 33.49mg/g of zinc ions on A. indica bark biomass and kinetic data were properly fitted with the pseudo-second-order kinetic model.     

Pecan nutshell as biosorbent to remove Cu(II), Mn(II) and Pb(II) from aqueous solutions

In the present study we reported for the first time the feasibility of pecan nutshell (PNS, Carya illinoensis) as an alternative biosorbent to remove Cu(II), Mn(II) and Pb(II) metallic ions from aqueous solutions. The ability of PNS to remove the metallic ions was investigated by using batch biosorption procedure. The effects such as, pH, biosorbent dosage on the adsorption capacities of PNS were studied. Four kinetic models were tested, being the adsorption kinetics better fitted to fractionary-order kinetic model. Besides that, the kinetic data were also fitted to intra-particle diffusion model, presenting three linear regions, indicating that the kinetics of adsorption should follow multiple sorption rates. The equilibrium data were fitted to Langmuir, Freundlich, Sips and Redlich-Peterson isotherm models. Taking into account a statistical error function, the data were best fitted to Sips isotherm model. The maximum biosorption capacities of PNS were 1.35, 1.78 and 0.946mmolg(-1) for Cu(II), Mn(II) and Pb(II), respectively.     

Biosorption of Cr (VI) from aqueous solutions by biomass of Agaricus bisporus

In this study, biosorption of Cr (VI) ion was investigated by using biomass of Agaricus bisporus (a species of mushroom) in a temperature and shaking speed controlled shaker. The effect of shaking speed, biomass concentration, initial metal ion concentration and initial pH on biosorption yield was determined and the fitness of biosorption data for Freundlich and Langmuir adsorption models was investigated. Optimum biosorption conditions were found to be pH 1, C0=50 mg/l, m=10 g/l, shaking speed=150 rpm, T=20 degrees C Cr (VI), respectively. It was found that biosorption of Cr (VI) ions onto biomass of A. bisporus was better suitable to Freundlich adsorption model than Langmuir adsorption model. The correlation coefficients for the second-order kinetic model obtained were found to be 0.999 for all concentrations. These indicate that the biosorption system studied belongs to the second-order kinetic model.     

Biosorption of nickel from protonated rice bran

In the present study biosorption technique, the accumulation of metals by biomass was used for the removal of nickel from aqueous medium. The rice bran in its acid treated (H(3)PO(4)) form was used as a low cost sorbent. The adsorption characteristics of nickel on protonated rice bran were evaluated as a function of pH, biosorbent size, biosorbent dosage, initial concentration of nickel and time. Within the tested pH range (pH 1-7), the protonated rice bran displayed more resistance to pH variation, retaining up to 102 mg/g of the nickel binding capacity at pH 6. Meanwhile, at lower pH values the uptake capacity decreased. The % age removal of nickel was maximum at 0.25 g of biosorbent dose and 0.25 mm biosorbent size. At the optimal conditions, metal ion uptake was increased as the initial metal ion concentration increased up to 100mg/L. Kinetic and isotherm experiments were carried out at the optimal pH 6.0 for nickel. The metal removal rate was rapid, with 57% of the total adsorption taking place within 15-30 min. The Freundlich and Langmuir models were used to describe the uptake of nickel on protonated rice bran. The Langmuir and Freundlich model parameters were evaluated. The equilibrium adsorption data was better fitted to Langmuir adsorption isotherm model. The adsorption followed pseudo second-order kinetic model. The thermodynamic assessment of the metal ion-rice bran biomass system indicated the feasibility and spontaneous nature of the process and DeltaG degrees values were evaluated as ranging from -22.82 to -24.04 kJ/mol for nickel sorption. The order of magnitude of the DeltaG degrees values indicated an ion-exchange physiochemical sorption process.     

Kinetic and equilibrium studies of biosorption of Pb(II) and Cd(II) from aqueous solution by macrofungus (Amanita rubescens) biomass

The biosorption characteristics of Pb(II) and Cd(II) ions from aqueous solution using the macrofungus (Amanita rubescens) biomass were investigated as a function of pH, biomass dosage, contact time, and temperature. Langmuir, Freundlich and Dubinin-Radushkevich (D-R) models were applied to describe the biosorption isotherm of the metal ions by A. rubescens biomass. Langmuir model fitted the equilibrium data better than the Freundlich isotherm. The maximum biosorption capacity of A. rubescens for Pb(II) and Cd(II) was found to be 38.4 and 27.3mg/g, respectively, at optimum conditions of pH 5.0, contact time of 30min, biomass dosage of 4 g/L, and temperature of 20 degrees C. The metal ions were desorbed from A. rubescens using both 1M HCl and 1M HNO(3). The recovery for both metal ions was found to be higher than 90%. The high stability of A. rubescens permitted ten times of adsorption-elution process along the studies without a decrease about 10% in recovery of both metal ions. The mean free energy values evaluated from the D-R model indicated that the biosorption of Pb(II) and Cd(II) onto A. rubescens biomass was taken place by chemical ion-exchange. The calculated thermodynamic parameters, DeltaG degrees , DeltaH degrees and DeltaS degrees showed that the biosorption of Pb(II) and Cd(II) ions onto A. rubescens biomass was feasible, spontaneous and exothermic under examined conditions. Experimental data were also tested in terms of biosorption kinetics using pseudo-first-order and pseudo-second-order kinetic models. The results showed that the biosorption processes of both Pb(II) and Cd(II) followed well pseudo-second-order kinetics. Based on all results, It can be also concluded that it can be evaluated as an alternative biosorbent to treatment wastewater containing Pb(II) and Cd(II) ions, since A. rubescens is low-cost biomass and has a considerable high biosorption capacity.     

Biosorption of 2,4-dichlorophenol from aqueous solution by Phanerochaete chrysosporium biomass: isotherms, kinetics and thermodynamics

The biosorption of 2,4-dichlorophenol (2,4-DCP) from aqueous solution on non-living mycelial pellets of Phanerochaete chrysosporium was studied with respect to pH, initial concentration of 2,4-DCP, temperature and pellet size. The fungal biomass exhibited the highest sorption capacity of 4.09 mg/g at an initial pH of 5.0, initial 2,4-DCP concentration of 50.48 mg/l, 25 degrees C and a pellet size of 1.0-1.5 mm in the investigated pH 2.0-11.0, initial concentrations of 5-50 mg/l, temperature 25-50 degrees C, and pellet size of 1.0-2.5 mm. The Freundlich model exhibited a slightly better fit to the biosorption data of 2,4-DCP than the Langmuir model. The biosorption of 2,4-DCP to biomass followed pseudo second-order adsorption kinetics. The second-order kinetic constants decreased with increasing temperature, and the apparent activation energy of biosorption was estimated to be -16.95 kJ/mol. The thermodynamic analysis indicates that the biosorption process was exothermic and that the adsorption of 2,4-DCP on P. chrysosporium might be physical in nature. Both intraparticle diffusion and kinetic resistances might affect the adsorption rate and that their relative effects varied with operation temperature in the biosorption of 2,4-DCP by mycelial pellets.     

Application of a by-product of Lentinus edodes to the bioremediation of chromate contaminated water

The agricultural by-product of Lentinus edodes was used as a novel biosorbent for bioremediation of chromate contaminated waste water in the simulated experimental conditions. The contact time, particle size, biosorbent dosage and optimum pH range were investigated to optimize the sorption condition. The biosorption by the biomass was strongly affected by pH. At pH 1.0-2.5, all hexavalent chromium was diminished, either removed by the biosorbent or reduced to less toxic trivalent chromium even in very high concentration of 1000 mg/L. The adsorbed hexavalent chromium and reduced trivalent chromium were both linearly dependent on the initial chromium concentration. Most uptake of Cr occurred at pH around 4. The maximum uptake of chromium was 21.5 mg/g when simulated with Langmuir model, which showed the potential biosorption capacity of this biomaterial. The change of oxidation-reduction potential (ORP) during biosorption process revealed strong reduction ability of this biosorbent. Comparing analysis from Fourier transform infrared spectrums indicated that nitrogen oxide and carboxyl groups were increased after biosorption. The energy-dispersive X-ray microanalyzer revealed the mechanism of cation exchange during biosorption.     

Enhanced biosorption of nickel(II) ions by silica-gel-immobilized waste biomass: biosorption characteristics in batch and dynamic flow mode

Batch and dynamic flow biosorption studies were carried out using the waste biomass entrapped in silica-gel matrix for the removal of nickel(II) ions from synthetic solutions and real wastewater. Batch biosorption conditions were examined with respect to initial pH, S/L ratio, contact time, and initial nickel ion concentration. Zeta potential measurements showed that immobilized biosorbent was negatively charged in the pH range of 3.0-8.0. The immobilized biomass was found to possess relatively high biosorption capacity (98.01 mg g(-1)), and biosorption equilibrium was established in a short time of operation (5 min). The equilibrium data were followed by Langmuir, Freundlich, and Dubinin-Radushkevich isotherm models. Scanning electron microscope analysis was used to screen the changes on the surface structure of the waste biomass after immobilization and nickel(II) biosorption. Sorbent-sorbate interactions were confirmed by Fourier transform infrared spectroscopy. The applicability of sorbent system was investigated in a continuous mode, and column studies were performed under different flow rate, column size, and biosorbent dosage. Also, the proposed sorbent system was successfully used to remove the nickel ions from industrial wastewater in dynamic flow treatment mode. The results showed that silica-immobilized waste biomass was a low-cost promising sorbent for sequester of nickel(II) ions from synthetic and real wastewater.     

Utilization of fermentation waste (Corynebacterium glutamicum) for biosorption of Reactive Black 5 from aqueous solution

A fermentation waste, Corynebacterium glutamicum, was successfully employed as a biosorbent for Reactive Black 5 (RB5) from aqueous solution. This paper initially studied the effect of pretreatment on the biosorption capacity of C. glutamicum toward RB5, using several chemical agents, such as HCl, H(2)SO(4), HNO(3), NaOH, Na(2)CO(3), CaCl(2) and NaCl. Among these reagents, 0.1M HNO(3) gave the maximum enhancement of the RB5 uptake, exhibiting 195mg/g at pH 1 with an initial RB5 concentration of 500mg/l. The solution pH and temperature were found to affect the biosorption capacity, and the biosorption isotherms derived at different pHs and temperatures revealed that a low pH (pH 1) and high temperature (35 degrees C) favored biosorption. The biosorption isotherm was well represented using three-parameter models (Redlich-Peterson and Sips) compared to two-parameter models (Langmuir and Freundlich models). As a result, high correlation coefficients and low average percentage error values were observed for three-parameter models. A maximum RB5 uptake of 419mg/g was obtained at pH 1 and a temperature of 35 degrees C, according to the Langmuir model. The kinetics of the biosorption process with different initial concentrations (500-2000mg/l) was also monitored, and the data were analyzed using pseudo-first and pseudo-second order models, with the latter describing the data well. Various thermodynamic parameters, such as DeltaG degrees, DeltaH degrees and DeltaS degrees, were calculated, indicating that the present system was a spontaneous and endothermic process. The use of a 0.1M NaOH solution successfully desorbed almost all the dye molecules from dye-loaded C. glutamicum biomass at different solid-to-liquid ratios examined.