喷气涡流纱及其织物性能分析

文章对竹浆纤维和莫代尔纤维两种原料的喷气涡流纱与环锭纱及其织物进行了测试分析和比较,得出喷气涡流纱制成的织物与环锭纱制成的织物相比具有更加柔软,强度较低,表面光滑,耐磨,透气较好的特点。     

Effects of fiber types and blend ratios on Murata Vortex yarn properties

Murata Vortex spinning (MVS) system is one of the unconventional systems for yarn manufacturing. It is suitable for spinning of 100% cotton fibers, synthetic fibers, and cotton/synthetic fiber blends which are 1 inch or more in length. The production ranges are between Ne 15-60. Vortex yarn and fabrics have low hairiness, clear appearance, high resistance to pilling and abrasion. In this study, the vortex yarns with Ne 30 are produced in different blend ratios in Murata Vortex Spinner using carded cotton, viscose, modal, silver-added polyester (Flexsil-D2?), polyester, and nylon 6.6 fibers. Vortex spun yarns are tested to determine the yarn properties which are diameter, density, roundness (shape), unevenness, imperfection, Uster hairiness (H), Zweigle hairiness, tenacity, and elongation. The study reveals that the fiber type has quite significant effects on yarn properties. In terms of structural properties, cotton is the most negative fiber while regenerated cellulosic fibers are the most positive. As modal, nylon and polyester fiber increase yarn strength, nylon and viscose fiber increase breaking elongation. Viscose and modal reduce unevenness, imperfection and hairiness while polyester and nylon exhibit more negative effect on these properties.     

低扭矩环锭纺纱原理及其单纱的结构和性能

本文主要回顾了低扭矩环锭纺纱技术的发展。通过讨论其纺纱三角区的特点,利用高速摄影技术对纺纱区捻度和张力分布的观察分析,系统地介绍了低扭矩纱的成纱原理。此外,结合示踪纤维技术,利用纱线结构连续测量分析系统对低扭矩环锭单纱和传统环锭单纱的内部结构进行分析,揭示了低扭矩纱独特的结构特点,如非同轴异形螺旋线结构,纤维片段局部反转现象等。这些特点解释了低扭矩纱及其织物具有优良物理性能的原因。同时,通过多个生产厂家提供的测试数据,对比分析了几代低扭矩环锭纱与传统环锭纱及其织物的物理性能,结果表明低扭矩环锭纱具有低捻高强、低残余扭矩和毛羽少等特点,其针织物经多次水洗后歪斜变形小和手感好,机织物具有较好的撕裂强力,断裂强力和耐磨擦性。最新一代低扭矩环锭纺纱技术显著地改善了高支纯棉纱的物理性能。     

摩擦纺包芯纱织物性能测试分析

对棉包涤纶长丝摩擦纱、棉包锦纶高弹丝摩擦纱、棉包锦纶全牵伸丝摩擦纱以及棉包粘胶长丝摩擦纱四种平纹织物的性能进行了试验研究 ,并将它们与纯棉环锭纱和纯棉摩擦纱的平纹织物的性能进行了比较分析。研究结果表明 ,棉包涤纶长丝摩擦纱织物和棉包锦纶高弹丝摩擦纱织物在服用、舒适等方面均优于环锭纱织物。这两种摩擦纺包芯纱织物作为服用织物具有良好的发展前景     

Research on flow field in a modified ring spinning system with the air nozzle

Twisting is one of the most important steps in the yarn spinning, which influences the geometry of spinning triangle and determines the properties of spun yarns. Airflow is one of the most important measures on improving yarn spinning. In this paper, a kind of air nozzle with vortex guiding channel was designed and used on the modification of ring spinning system, and the spun yarn qualities was studied by analyzing the airflow field in the nozzle. Firstly, the three-dimensional physical model of nozzle was given using CAD software according to the geometrical size of the practical nozzle model. Then, the numerical simulations of the three-dimensional flow field in the nozzle were given using Fluent software. Finally, two different kinds of yarns 10Ne and 20Ne were spun in the modified ring spinning system with the nozzle installed. The airflow pressure 0.01 Mpa and two different swirling directions, anticlockwise and clockwise, were chosen. The qualities of spun yarns, hairiness, strength, evenness, and number of snarling were measured and analyzed. It is shown that the high vortex airflow can be produced in the nozzle, and then corresponding twist can be produced. For the Z(S) twisting spun yarn, under the effects of the clockwise (anticlockwise) vortex airflow, the pre-twisting would be produced and the yarn twist can be strengthened, while under the effects of the anticlockwise (clockwise) vortex airflow, the untwisting effect would be produced, and the yarn twist can be decreased.     

Application of air‐jet nozzle in short staple Siro spinning system

With the objective of reducing the hairiness of Siro spun yarns, two types of air‐jet nozzle differing in the angle of sub‐holes and suitable for an air vortex ring spinning system were designed and fabricated. The performance of the JetSiro spinning system on short staple fiber materials and the effects of the different parameters on the hairiness of JetSiro spun yarns, such as nozzle pressure of compressed air, distance between front roller nip and inlet of nozzle, and nozzle structure, were investigated using the Taguchi method. The physical properties of JetSiro spun yarns with those of conventional Siro spun yarns were compared. The results show that the parameters, air pressure and distance between front roller nip and inlet of nozzle have the strongest and weakest effect on yarn hairiness. In addition, the optimum spinning conditions were determined. The application of the air‐jet nozzle exhibits significant reductions in yarn hairiness of 40%. The results revealed no significant effect of the air‐jet nozzle on the yarn tensile properties and evenness.     

涡流纺纱线的包缠加捻对其力学性能的影响

为探究涡流纺纱线的包缠加捻与成纱力学性能的关系,从理论上分析了涡流纺纱线拉伸过程中的纤维形变与受力,详细研究了涡流压力和纺纱速度对涡流纺纱线力学性能的影响.结果表明:外层纤维螺旋包缠特性对涡流纺成纱的力学性能起着决定性作用,涡流压力和纺纱速度为影响涡流纺包缠和加捻效果的主要因素;当纺纱速度为280 m/min时,随着涡...     

Comparison of fabric properties knitted by pin spacer compact and conventional compact yarns

This study examined the influence of pin spacer apparatus attachment on compact yarn quality parameters and physical properties of knitted fabrics manufactured using those 100% cotton compact yarns. Two groups of compact yarns were spun on regular compact yarn spinning frame with and without addition of pin spacer apparatus which is placed at the end of the drawing unit of regular compact yarn spinning frame. Totally eight yarns were spun at four different yarn number levels (Ne 24/1, Ne 30/1, Ne 36/1 and Ne 40/1) and two different spinning conditions (with and without pin spacer apparatus). Spun yarn types were then knitted on the industrial sized plain knitting machine. Knitted fabrics were used in the greige and dyed form to evaluate their bursting strength (kPa), dimensional change, abrasion related mass loss (%), pilling resistance, air permeability (mm/s) and colour difference. Test results were then statistically evaluated and influence of pin spacer attachment on yarn quality parameters and fabric properties was determined. In the frame of this experimental work, attachment of pin spacer apparatus improved compact yarn characteristics especially at yarn evenness, imperfection and hairiness values. In case of knitted fabric properties, it was found that pin spacer apparatus attached compact yarn utilization significantly improved air permeability properties of knitted fabrics.     

Studies on cotton-acrylic bulked yarns produced from different spinning technologies. Part II: fabric characteristics

The present work is concerned with the study of the characteristics of plain woven fabric produced with cotton-acrylic high-bulk yarns from different spinning technologies. The effects of different factors, namely spinning technologies (ring, rotor and DREF-II, i.e. Group A fabrics), position of shrinkable acrylic feed sliver in DREF-II friction spinning system (Group B fabrics) and proportion of shrinkable acrylic core fibre in core-sheath type DREF-III friction spun yarns (Group C fabrics) on various properties of cotton-acrylic blended bulked yarn fabrics have been reported. The influence of these three variables on the mechanical, handle and comfort properties of fabrics have been studied. The properties of fabrics made of bulked yarns from different spinning technologies are found to be different from the normal 100% cotton yarn fabrics in all respect. Even though the bulked yarns were used only in weft direction, the fabrics with modified yarn structures show appreciable improvement in thermal resistance, moisture vapour transmission, wicking and air permeability. The bending rigidity of the fabrics in weft direction also reduced with improvement in crease recovery in weft direction.     

The effect of core-sheath proportion on the characteristics of fabrics produced with hollow yarns: part II comfort and mechanical properties

The study aims to investigate the effect of hollow yarn structure and the sheath-core proportion of hollow yarns on the permeability properties of the knitted fabrics. In order to accomplish this, core yarns in the yarn count of 59 tex were produced by using cotton, viscose, wool, and polyester fibers in the sheath and different ratios of polyvinyl alcohol (PVA) in the core. After completion of yarn production on ring spinning frame, the yarns in the form of packages were used to produce plain knitted fabrics. Fabrics were then divided into two groups, one of which was washed during a time period in order to remove PVA from the core to obtain hollow yarn structure. Air and water permeability, and wicking properties of the knitted fabrics were measured before and after washing processes. Mechanical properties such as pilling and bursting strength of the fabrics were also examined. The results show that washing process and PVA proportion used to produce core spun yarns have a significant effect on the permeability and mechanical properties of the fabrics.     

The dimensional and mechanical properties of wool/polyester fabrics made from vortex and ring-spun yarns

Fabric woven from wool/polyester (PES) Murata vortex spun (MVS) blend yarn is a commercially viable proposition particularly on the basis of advantageous wear-resistant properties, compared with fabric made from traditional worsted ring-spun yarn. However, in some early industrial trials with fabric made from 45/55-blend wool/PES MVS yarn, significantly greater relaxation shrinkage was found relative to comparable worsted ring-spun fabric. It was noted at the time that the amount of relaxation shrinkage in MVS fabric could be reduced to a large extent by using steamed MVS yarn.

In this study, the extent of variations in the dimensional and mechanical properties of fabric samples woven from a combination of steamed and unsteamed MVS yarn and equivalent worsted ring-spun yarn is examined. In general, greater hygral expansion and relaxation shrinkage were found in loom-state fabrics made from unsteamed MVS yarns, whereas the fabric made from steamed MVS and ring-spun yarns gave relatively low levels of relaxation shrinkage and hygral expansion. Permanent setting of fabrics, by pressure steaming, was found to be more effective than yarn pre-steaming in reducing relaxation shrinkage levels of fabrics made from unsteamed MVS yarn. After pressure steaming, all fabrics showed similar levels of relaxation shrinkage and hygral expansion.

Permanent setting of the fabrics, by pressure steaming, resulted in similar levels of relaxation shrinkage and hygral expansion, irrespective of the yarn production method; relaxation shrinkage fell to around 1% and hygral expansion increased by about 1%, relative to the loom-state samples. MVS fabrics were relatively heavier and fuller and had a firmer handle than the worsted ring-spun fabrics, reflecting the greater fabric weight, thickness and shear rigidity measured on these fabrics. These attributes are associated with different structures of the worsted ring-spun and MVS yarns used to make the fabrics.     

基于图像的喷气涡流纺纱线捻度测试方法探讨

为探究适用于喷气涡流纺纱线捻度测试的有效方法,在对比分析喷气涡流纺纱线与传统环锭纺纱线结构的基础上,借助扫描电子显微镜,分别通过喷气涡流纺纱线的外观图像和横截面图像,测试了喷气涡流纺纱线捻度.并采用Photoshop软件处理喷气涡流纺纱线横截面图像,探究喷气涡流纺纱线内外层纤维数量比与其捻度的关系,提出了用喷气涡流纺纱...     

Research on spun yarn qualities in a modified ring-spinning system using airflow-twisting device

In this paper, a kind of airflow-twisting devices which can produce the twist by the high vortex airflow is employed for improving the twist propagation process of ring-spinning system. Firstly, three different kinds of yarns Ne20, Ne40, and Ne60 are spun in this modified ring-spinning system with five different airflow pressures and two different swirling directions, including anticlockwise and clockwise, and the qualities of spun yarns, including hairiness, strength, evenness, and number of snarling characterizing the yarn residual torque, are measured. Secondly, the images of spinning triangles are captured by using a high speed camera system OLYMPUS i-speed3, and the mechanism of the effects of vortex airflow on yarn qualities is discussed by analyzing the fiber tension distributions in the spinning triangle. It is shown that for the ‘Z’ twist spun yarn, the spinning triangle decreases with the increasing of clockwise airflow pressures, whereas the triangle becomes more and more symmetrical with the increasing of anticlockwise airflow pressures. Meanwhile, the comprehensive qualities of spun yarn are improved with the increasing of both directions of airflow pressures to a certain extent. However, the hairiness and strength of spun yarn will be mainly improved with clockwise airflow, whereas yarn residual torque mainly reduced with anticlockwise airflow.     

The Influence of the Spinning Process,Yarn Linear Density,and Fibre Properties on the Hairiness of Ring-spun and Rotor- spun Cotton Yarns

Cotton–spun yarns from 34 staple stocks were manufactured by means of the ring–spinning process (34 yarns) and a rotor–spinning process (29 yarns) and tested for hairiness with the Shirley Hairiness Meter. For each spinning system, yarns were spun at two values of yarn linear density (15 and 30 tex for ring–spinning and 30 and 50 tex for rotor–spinning), but the twist multiplier was kept constant within the series for each spinning process.

The higher hairiness of ring–spun yarns and an increase ln hairiness with the yarn linear density were confirmed. The effect of the fibre parameters on yarn hairiness explains only about 30% of the total effect for ring–spun yarns and 40% for rotor–spun yarns. Fibre length and its uniformity are the fibre properties having the greatest influence on the hairiness of both ring– and rotor–spun yarns, the Micronaire index having only slight influence on the hairiness of ring–spun yarn.     

A study on siro-, solo-, compact-, and conventional ring-spun yarns. Part I: structural and migratory properties of the yarns

Properties of spun yarns are mainly affected by fiber properties and yarn structure. Yarn structure is principally influenced by the spinning system. In fact, each spinning system tends to produce a distinctive yarn structure. Recent refinements in spinning technologies have yielded significant improvement in yarn structure. Siro, solo and compact spinning are the new spinning systems to have made a breakthrough until recently. Of the various structural parameters for staple yarns, fiber migration has a crucial influence on the yarn mechanical properties. Thus, the need for precise and concise information about fiber migration becomes important for better understanding of yarn structure and hence yarn mechanical behavior. The work presented here aims to analyze fiber migration in siro-, solo-, compact-, and conventional ring-spun yarns by varying the twist factor. The results demonstrate that the siro-spun yarns exhibit the highest fiber migration parameters, followed by compact-spun yarns, solo-spun yarns, and conventional ring-spun yarns.     

Investigation of the fastness properties and color values of cotton fabrics knitted from ring spun and Sirospun® yarns

Sirospun yarn production is a new approach to produce two‐folded and twisted yarns. This method integrates the spinning and folding action in a single step. Therefore, it may have some important advantages such as simplicity of the process, lower production costs, lower investment, space saving, etc. The purpose of the study is to compare the color fastness and colorimetric properties of sirospun yarn, single and two‐folded ring spun yarns produced by same cotton fiber blend. Therefore, three reactive dyes were applied at 1% omf (on mass of fabric) depth of shade to the single jersey fabrics which are produced by sirospun yarn, single and two‐folded ring spun yarns at three different counts. The examination of color coordinates of undyed and dyed samples on CIELAB color space shows that undyed sirospun fabrics show slightly higher whiteness than both undyed single and two‐folded ring fabrics for all three yarn counts. Also, the color strength values of the samples are determined as slightly different for all three dyes. The experimental studies show that sirospun yarns have no disadvantages with respect to conventional folded and twisted yarns when their fastness properties were compared.     

多重集聚纺纱结构成形机制及其针织物性能

为解决多毛羽传统环锭纱针织困难,而光洁的常规集聚纺纱线织物手感硬的技术难题,建立串联半开放式多重集聚纺纱方法,分析多重集聚纺纱机制和结构成形特征。理论分析结果表明,多重集聚纺纱线具有外紧而内柔的结构特征。基于理论解析,在相同工艺条件下,分别采用传统环锭、常规集聚和多重集聚纱线制成针织面料,对比分析了各针织物压缩回弹、透气、抗起毛起球、耐磨、染色等性能。测试结果表明：与传统环锭纱相比,多重集聚纱线针织物耐磨、透气性、抗起毛起球性改善;与常规集聚纱线相比,多重集聚纱线针织物悬垂性、压缩回弹性和染色性能明显提高。     

Impact of structural variations in hollow yarn on heat and moisture transport properties of fabrics

The use of hollow/microporous yarns plays an important role in enhancing the thermo‐physiological comfort properties of fabrics. Depending on structural variations in hollow yarn, heat and moisture regulation behaviours of fabrics can be affected significantly. In this study, three types of hollow cotton yarn fabrics, produced by introducing polyvinyl alcohol (PVA) filament in the core, PVA staple fibres in the blend and PVA filament in doubling with cotton spun yarn, are studied. All three types of pre‐hollow yarns and reference yarns are made with a variation in spinning technique (single roving/double roving) to prepare eight single jersey knitted fabrics. The hollow/microporous structure of the yarn is created by dissolving the PVA fibres using hot washing of the fabrics. On overall evaluation of the fabric’s thermo‐physiological comfort properties, the doubled hollow yarn fabrics are found to be better than other fabrics. In general, thermal resistance, thermal absorptivity, wicking and drying properties of all types of hollow yarn fabrics increase after repeated laundering, while air permeability, water vapour permeability and water absorbency of hollow yarn fabrics mostly decrease. In contrast with fabrics made from yarn produced through single roving technique, use of double roving technique only improves fabric water vapour permeability.     

喷气涡流纺金属丝包芯纱的制备及其结构与性能

为改善基于金属丝的织物导电线路的特性,采用了一种改进的喷气涡流纺纱方法,制备出面向织物导电线路的,以超细金属丝（直径50 μm）为芯丝的包芯纱,并对其结构与电学、力学性能进行了分析。所设计的喷气涡流纺纱装置可以250 m/min的纺纱速度实现对芯丝为超细金属丝的包芯纱的连续制备;制备的喷气涡流纺金属丝包芯纱结构从内到外依次为金属丝、平行无捻的芯纤维及包缠纤维;金属丝在包芯纱横截面中的位置分布以位于中心至距三分之一位置区间和距中心三分之一至三分之二位置区间类型为主;喷气涡流纺金属丝包芯纱的断裂强力比金属丝提高100%～200%,纤维的包缠形式与包缠量对包芯纱内部金属芯丝的电阻值变化率随伸长率的变化没有显著影响,表明喷气涡流纺金属丝包芯纱具有与原金属丝相接近的电学性能。     

喷气涡流纺工艺对粘胶/涤纶包芯纱性能的影响

为获得更高强力的喷气涡流纺纱线,通过引入涤纶长丝制备喷气涡流纺粘胶/涤纶包芯纱。采用统计分析等方法研究了芯丝线密度、纺纱速度对喷气涡流纺粘胶/涤纶包芯纱强伸性、条干不匀和毛羽的影响规律,同时对比分析了不同纺纱条件下包芯纱的结构外观。研究结果表明：芯丝线密度、纺纱速度对喷气涡流纺粘胶/涤纶包芯纱各性能响应值有不同程度的影响;纺纱速度过高或过低均不利于包芯纱成纱的强伸性提高和条干均匀性改善,纺纱速度的增加会使毛羽H值增大;在一定范围内,增加芯丝线密度有利于包芯纱强伸性的提高,随芯丝线密度的增加,包芯纱毛羽H值减小;此外,选用较大的芯丝线密度和较高的纺纱速度时,纺制的包芯纱芯丝外露现象越明显。