基于拥塞预知的WSN多径寻优路由协议

针对无线传感器网络中常出现传输拥塞的问题,该文提出了一种基于拥塞预知的多径寻优路由协议(MOPC)。该协议基于主动避免拥塞的设计思想,依据节点的拥塞预知度、剩余能量和最小跳数建立路径满意度模型,实现了最优路径的选取;通过设定最优路径上节点的转发满意度变化率阈值,实现局部路由的动态维护。仿真结果表明,该协议具有良好的实时性和可靠性,并能显著提高能量利用率,延长网络生命期。     

无线传感器网络中一种基于能量策略的路由算法

介绍了无线传感器网络(Wireless Sensor Network, WSN)的概念和特点,在此基础上针对无线传感器网络的特点提出了一种能量效率高和能量消耗平衡的路由新算法：最小能耗路由和节点能量最大路由周期轮转。给出了在WSN中多点对一点通信的最小能耗路径和节点能量最大路径的矩阵算法。     

无线传感器网络中利用随机网络编码的低能耗可靠机会路由

无线传感器网络中节点大多采用电池供电,让节点以低能耗将采集的数据传递到信宿,对无线传感器网络有效运行极为重要.该文提出了能量有效的可靠机会路由EROR（Energy-efficient Reliable Opportunistic Routing）,它利用结合节点剩余能量和链路上收发双方的总能耗的转发代价,选择转发节点集合（简称“转发集”）、主转发节点和协助转发节点,让节点调节发射功率并利用随机线性编码把数据包分片编码发送到转发集,进而以多跳方式把数据可靠低能耗地传递到信宿.仿真结果表明：在网络生存时间和能耗方面,EROR比已有路由策略CodePower更优.     

基于跨层网络编码感知的无线传感器网络节能路由算法研究

编码感知路由可以发现路由中的网络编码机会,减少数据传输次数,提高网络吞吐量,是近年来路由算法研究的一个热点.当前编码感知路由存在编码条件失效、未考虑节点能量的问题,不适合直接应用于无线传感器网络.本文提出基于跨层网络编码感知的无线传感器网络节能路由算法CAER (Cross layer coding Aware Energy efficient Routing).提出并证明了修正后的网络编码条件,以解决编码条件失效问题.基于跨层思想,将网络编码感知机制与拓扑控制、覆盖控制结合,挖掘潜在编码机会.提出综合考虑节点编码机会、节点能量的跨层综合路由度量CCRM (Cross layer Coding aware Routing Metric).仿真结果表明,相比现有编码感知路由,CAER能够提高网络编码感知准确性,增加网络编码机会数量5%~15%,延长网络生存时间8%~12%.     

一种可靠的无线传感器网络路由算法

在基于分簇的无线传感器网络中,为了有效地转发数据,研究者们提出了各种簇组织和簇首选举机制,但是这些机制缺少关注簇首与汇聚节点之间数据传输的可靠性.针对该问题,提出一种可靠的数据路由方案,通过链路代价函数和动态的簇首间路由,控制簇首到汇聚节点的数据转发.仿真结果表明,该方案不仅有效地增加数据包的投递率,也能够均衡网络的能量消耗.     

无线传感器网络中基于线性网络编码的节能路由算法

 该文基于网络编码思想,提出一种无需重传与确认的路由算法,这种算法以最小化单位比特有效数据的能耗为目标,给出最优化数学模型,并用遗传算法进行求解.所提出的免重传路由算法可以降低能耗,减轻节点之间的无线电干扰,节省了节点用于重传数据包所需配置的缓存.     

基于内容的无线传感器网络路由协议

针对无线传感器网络环境下低功耗路由问题,根据无线传感器网络是一种以数据为中心的网络的特点,提出了一种基于内容的低功耗路由协议CBP。其基本思想是:Sink节点根据上层应用构造谓词,并对谓词进行广播,网络中所有传感节点以Sink节点的谓词为依据建立路由表,实现数据路由。与现有无线传感器网络路由协议相比较,此路由协议具有低功耗,占用节点资源少,网络容错能力强等特点。仿真结果表明,在节点数量大于100的大规模网络中,基于内容的无线传感器网络路由协议功耗比定向扩散协议功耗降低19%。     

Location-Based Routing Algorithms for Wireless Sensor Network

Routing algorithms based on geographical location is an important research subject in the Wireless Sensor Network(WSN).They use location information to guide routing discovery and maintenance as well as packet forwarding,thus enabling the best routing to be selected,reducing energy consumption and optimizing the whole network.Through three aspects involving the flooding restriction scheme,the virtual area partition scheme and the best routing choice scheme,the importance of location information is seen in the routing algorithm.     

基于权值的无线传感器网络分簇算法

综述了无线传感器网络路由算法的主要成果,但重点分析更具有能量有效性的分簇路由算法,对各种算法的主要思想进行了性能评价,提出了一种新的算法.     

一种无线传感器网络分簇路由算法研究

在分析LEACH协议的基础上提出一种基于能量和距离的多跳路由算法（CAED）。由基站依据节点剩余能量和簇头与基站的距离分别选出二层簇头,簇内节点利用单跳和多跳模式与簇头进行通信。仿真实验表明,新算法有效地平衡了节点的能量消耗,并显著地延长了网络的生命周期。     

A Novel Trust-Aware Geographical Routing Scheme for Wireless Sensor Networks

Wireless sensor networks are vulnerable to a wide set of security attacks, including those targeting the routing protocol functionality. The applicability of legacy security solutions is disputable (if not infeasible), due to severe restrictions in node and network resources. Although confidentiality, integrity and authentication measures assist in preventing specific types of attacks, they come at high cost and, in most cases, cannot shield against routing attacks. To face this problem, we propose a secure routing protocol which adopts the geographical routing principle to cope with the network dimensions, and relies on a distributed trust model for the detection and avoidance of malicious neighbours. A novel function which adaptively weights location, trust and energy information drives the routing decisions, allowing for shifting emphasis from security to path optimality. The proposed trust model relies on both direct and indirect observations to derive the trustworthiness of each neighboring node, while it is capable of defending against an increased set of routing attacks including attacks targeting the indirect trust management scheme. Extensive simulation results reveal the advantages of the proposed model.     

A Co-optimization Routing Algorithm in Wireless Sensor Network

The MACORA is presented to solve the collision between mobile agent and multicast suppression in channel competitive process. With two-layer graph model, the channel converter problem in the dual-channel wireless sensor networks can be simplified into a routing problem over the two-layered graph, so we can search for routes in the control plane and transport traffic in the data plane synchronously. Then, the control plane and the data plane are integrated into a two-layered network, and searching for route for each traffic in the two-layer networks synchronously. The MACORA can make full use of the idle resource in different layers, this strategy deals with the collision between mobile agent and multicast suppression in channel competitive process well, so the blocking probability of networks and the error rate of packet transmission can be cut down. Simulation results show that the MACORA performs better in improving success rate of packet transmission.     

A Centralized Balance Clustering Routing Protocol for Wireless Sensor Network

Routing protocol plays a role of great importance in the performance of wireless sensor networks (WSNs). A centralized balance clustering routing protocol based on location is proposed for WSN with random distribution in this paper. In order to keep clustering balanced through the whole lifetime of the network and adapt to the non-uniform distribution of sensor nodes, we design a systemic algorithm for clustering. First, the algorithm determines the cluster number according to condition of the network, and adjusts the hexagonal clustering results to balance the number of nodes of each cluster. Second, it selects cluster heads in each cluster base on the energy and distribution of nodes, and optimizes the clustering results to minimize energy consumption. Finally, it allocates suitable time slots for transmission to avoid collision. Simulation results demonstrate that the proposed protocol can balance the energy consumption and improve the network throughput and lifetime significantly.     

A Delay-Aware Wireless Sensor Network Routing Protocol for Industrial Applications

With the rapid development of information communication technologies, industrial manufacturing environments and requirements have changed considerably. Since wireless sensor networks have become more and more popular, our production chains have improved with respect to efficiency, flexibility and security. On the other hand, building a secure, robust and fast network is an essential issue for enterprises. In the past, few experts focused on this issue of industrial applications and most of solutions proposed are not suitable for industrial environments. In this paper, we propose a real-time routing protocol for mobile wireless sensor nodes in industrial environments, which offers superior quality of service in terms of delay time. We use geographic routing and information contained in the nodes routing table to extract location information. Then we calculate the node which is nearest to the target node to reduce hop counts and achieve fast data package transfers. It optimizes the packets forwarding hops, which in turn reduces the delay time effectively. We used OPNET to analyze our protocol and results indicate that this algorithm is useful and suitable for wireless sensor networks     

A Novel Routing Protocol for Underwater Wireless Sensor Network Using Pareto Uninformed and Heuristic Search Techniques

In underwater communication, establishing a communication link between the sensor in the sea bed and the surface sinks is a daunting task. Further, the data has to be transmitted with minimum delay and maximum reliability. Therefore, the present study proposes a biobjective routing protocol for underwater wireless sensor networks. The existing protocols are reviewed and it is found that the traditional depth based and vector-based routing protocols are not able to tackle these conflicting objectives and hence suffer transmission failures with high delay. A biobjective optimization of delay and reliability of routes is proposed to obtain pareto-optimal routes employing uninformed search technique and a modified greedy best first search heuristic. Through simulation experiments, it is found that the biobjective protocol performs better than depth based, delay based and reliability-based routing protocols. However, since the biobjective routing problem in underwater wireless sensor networks is known to be NP-hard and dynamic in nature, the computational effort of uninformed search in yielding the exact solutions increases as the network size increases. The modified greedy best first search heuristic is employed to yield sub-optimal routes with less computational effort without compromising on the quality of the solutions and hence suitable for larger networks.

     

An Adaptive Energy-aware Multi-path Routing Protocol with Load Balance for Wireless Sensor Networks

Using the available but limited resources of sensors more efficiently has been the recent interest in designing the routing protocols for Wireless Sensor Network (WSN). The major concern includes energy, storage and computing resources. Accordingly, we propose an adaptive energy-aware Multi-path routing protocol with load balance (AEMRP-LB). It introduces a concept named direction-angle to overcome the deficiency of broadcast and takes into account the tradeoff between the residual energy and hop count to establish multiple node-disjoint paths. The traffic load is balanced over the selected paths by using a weighted traffic scheduling algorithm considering their transmitting capacity, and then AEMRP-LB uses the advantages of Multi-path Source Routing to report the acquired data as saving the computing and storage resources of the sensors. In the scene with multiple Source-Sink pairs, AEMRP-LB can adaptively adjust the available residual energy of shared nodes so as to make reasonable use of them. The simulation results show that AEMRP-LB outperforms the two comparative schemes, and the sensors consume the energy in a more equitable way which ensures a more graceful degradation of service with time.     

基于博弈论的无线传感器网络路由算法研究

在通过博弈论概念建立网络模型的基础上,讨论了各种针对特定传感器网络特点的路由算法。归纳了基于博弈论的无线传感器网络路由算法的设计原则和分类方法。详细比较了这些算法的特点、性能差异和应用范围.最后对无线传感器网络路由算法的研究现状进行了总结,并指出未来的研究重点。     

EOMR: An Energy-Efficient Optimal Multi-path Routing Protocol to Improve QoS in Wireless Sensor Network for IoT Applications

The wireless sensor network based IoT applications mainly suffers from end to end delay, loss of packets during transmission, reduced lifetime of sensor nodes due to loss of energy. To address these challenges, we need to design an efficient routing protocol that not only improves the network performance but also enhances the Quality of Service. In this paper, we design an energy-efficient routing protocol for wireless sensor network based IoT application having unfairness in the network with high traffic load. The proposed protocol considers three-factor to select the optimal path, i.e., lifetime, reliability, and the traffic intensity at the next-hop node. Rigorous simulation has been performed using NS-2. Also, the performance of the proposed protocol is compared with other contemporary protocols. The results show that the proposed protocol performs better concerning energy saving, packet delivery ratio, end-to-end delay, and network lifetime compared to other protocols.

     

无线传感器网络路由协议研究

对无线传感器网络经典的LEACH路由算法作了分析,提出了一种改进型算法。通过仿真,改进后的LEACH算法提高了传感器网络的能效,延长了系统的工作寿命。