Plant mediated green synthesis and antibacterial activity of silver nanoparticles using Crataegus douglasii fruit extract

In this study, silver nanoparticles were synthesized using the Crataegus douglasii fruit extract as a reducing agent. The reaction process was monitored by UV–vis spectroscopy. Further characterization was carried out using scanning electron microscopy (SEM). To optimize the biosynthesis of silver nanoparticles, the effect of process variables such as extract concentrations, mixing ratio of the reactants, time and pH were also investigated. The SEM images showed silver nanoparticles with 29.28 nm size and nearly spherical shape at 24 h interaction time. The antibacterial activity of the synthesized silver nanoparticles was confirmed against Staphylococcus aureus and Escherichia coli.     

Facile corrosion synthesis and sintering of disperse pure tetragonal zirconia nanoparticles

Disperse pure tetragonal zirconia (t-ZrO₂) nanoparticles smaller than 10 nm are essential for preparation of structural and functional zirconia materials, but syntheses of t-ZrO₂ nanoparticles using inorganic zirconium salts usually result in severe agglomeration. In this paper, we report a hydrothermal corrosion approach for improving the dispersity of t-ZrO₂ nanoparticles synthesized by precipitation using zirconium oxychloride without any surfactants. Disperse pure t-ZrO₂ nanoparticles with average sizes of 4.5 and 6 nm and size distributions of 2–11 and 3–12 nm were obtained by calcining precipitates at 400 °C for 2 h and 500 °C for 0.5 h followed by HCl corrosion at 120 °C for 75 h, respectively. Disperse t-ZrO₂ nanoparticles with an average size of 6 nm and a size distribution of 3–12 nm were pressed into green compacts at 500 MPa and sintered by two-step sintering (heating to 1150 °C without hold and decreasing to 1000 °C with a 10 h hold). The sintered bodies are dense pure monoclinic ZrO₂ nanocrystalline ceramic with a relative density of 99.9% and an average grain size of 110 nm.     

Rheology and colloidal structure of silver nanoparticles dispersed in diethylene glycol

Rheological behavior of agglomerated silver nanoparticles (~ 40 nm) suspended in diethylene glycol over a wide range of volumetric solids concentrations (? = 0.11–4.38%) was studied. The nanoparticle suspensions generally exhibited a yield pseudoplastic behavior. Bingham plastic, Herschel–Bulkley and Casson models were used to evaluate the shear stress-shear rate dependency. Analyzing the effect of silver concentrations on the yield stress and viscosity of the suspensions followed an exponential form, revealing an increase in the degree of interparticle interactions with increasing solid concentrations. Fractal dimension (D_f) was estimated from the suspension yield stress and ? dependence, and was determined as D_f = 1.51–1.62 for the flocculated nanoparticle suspensions. This suggested that the suspension structure was probably dominated by the diffusion-limited cluster–cluster aggregation (DLCA) due mostly to the strong attractions involved in the interparticle potentials. Maximum solids concentration of the suspensions was determined to be ?_m = 11%.     

Polysilazane-derived antibacterial silver–ceramic nanocomposites

Functional ceramic composites consisting of a dispersion of silver nanoparticles in a silicon (carbon)nitride matrix (nc-Ag/Si(C)N) were prepared via the polymer–ceramic route. Mixtures of 3 wt% as-synthesized Ag nanoparticles with a commercial polysilazane were pyrolysed under flowing nitrogen and/or ammonia. Bulk samples as well as coatings were investigated. Powder X-ray diffraction (XRD), transmission electron microscopy (TEM), thermal analysis (TGA, DTA), absorption spectroscopy (UV–vis) and infra red (IR) spectroscopy were used to characterize the products. The results indicate that the silver nanoparticles do not influence the cross-linking and pyroylsis process of the polysilazane precursor. At temperatures in the range of 800–1000 °C (H)Si(C)N matrices are obtained, which contain silver particles with an average size of 5–7 nm. Antibacterial tests on the pyrolysed material revealed strong activity against Escherichia coli and Staphylococcus aureus, suggesting the composites to be promising candidates for applications in fields such as the biomedical or food industries.     

The reduction of silver nitrate with various polyaniline salts to polyaniline–silver composites

A conducting polymer, emeraldine form of polyaniline (PANI), reduces silver nitrate to metallic silver. The composites of PANI and silver have been prepared at equimolar proportion of reactants. Seven acids, representing inorganic and organic acids, have been used to protonate PANI. The acids were selected with respect to their chemical indifference or the ability to precipitate or reduce silver(I) ions. The PANI–silver composites differed in the conductivity from 1.7 × 10^?6 S cm^?1 when PANI phosphate was used as a substrate to 22.8 S cm^?1 for PANI hydrochloride at comparable silver contents, 24 and 27 wt.%. The protonation state of PANI in PANI–silver composites was analyzed by FTIR spectroscopy. The composites contained spherical silver nanoparticles of 40–80 nm in size and also macroscopic particles, irrespective of PANI entering the reaction.     

A hybrid microreactor/microwave high-pressure flow system of a novel concept design and its application to the synthesis of silver nanoparticles

This article reports on a microreactor/microwave high-pressure flow hybrid apparatus of a novel concept design, which includes both the microreactor and a spiral reactor, and its efficient use in the synthesis of silver nanoparticles of relatively uniform sizes (4.3 ± 0.7 nm) under microwave irradiation. By contrast, under otherwise identical experimental conditions but with conventional heating, the nanoparticle size was non-uniform (8.3 ± 2.7 nm) and the spiral reactor walls were covered with a silver mirror deposit. Formation of the nanoparticles was monitored by UV–visible spectroscopy (plasmonic absorption band; LSPR), TEM and by small-angle X-ray scattering (SAXS). Both the spiral microreactor and the spiral quartz reactor of the hybrid system played an important role in the synthesis, with the microreactor providing the environment wherein mixing of the aqueous solution of [Ag(NH₃)₂]⁺ and the solution of glucose (the reducing agent) and poly(N-vinyl-2-pyrrolidone) (PVP; stabilizer/dispersing agent) occurred. The microwaves provided the thermal energy to effect a uniform growth of the silver nanoparticles at temperatures above 120 °C. Mixing the two solutions by conventional methods (no microreactor) failed to yield such nanoparticles even under microwave irradiation and no formation of a silver mirror occurred in the inner walls of the spiral reactor.     

Preparation of stable cross-linked enzyme aggregates (CLEAs) of NADH-dependent nitrate reductase and its use for silver nanoparticle synthesis from silver nitrate

The NADH-dependent nitrate reductase from Fusarium oxysporum cell extract was directly immobilized as cross linked enzyme aggregates (CLEAs) and investigated for the synthesis of silver nanoparticles by a reduction of silver nitrate. The effects of precipitant type and cross-linking on activity recovery of enzyme in CLEAs were studied. After aggregation of enzyme with ammonium sulfate followed by cross-linking formed aggregates for 4 h with 8 mM glutaraldehyde, 93% activity recovery was achieved in CLEAs with enhanced thermal stability at 50 °C and 40 °C. Scanning electron microscopy analysis showed that immobilized NADH-dependent nitrate reductase was of spherical structure. CLEAs showed 90% catalytic yield even after 4 cycles of repeated use in silver nanoparticle synthesis at pH 7.2 and temperature 35 °C.     

Microstructure and corrosion properties of Ni-TiN nanocoatings prepared by jet pulse electrodeposition

Ni–TiN nanocoatings were successfully prefabricated by jet pulse electrodeposition. The effect of jet rate on cross-sectional composition, microstructure, microhardness, and corrosion properties of nanocoatings was examined by X-ray photoelectron spectroscopy, high-resolution transmission electron microscope, atomic force microscopy, microhardness tester and electrochemical workstation. Results illustrated that Ni–TiN nanocoatings deposited at jet rate of 3 m/s exhibited high concentration of Ni and Ti with average concentrations of Ni and Ti of 54.5 at% and 19.8 at%, respectively. Average diameters of Ni grains and TiN nanoparticles in Ni–TiN nanocoatings prepared at 3 m/s were 47.8 nm and 30.5 nm, respectively. Nanocoatings deposited at 1 m/s, 3 m/s and 5 m/s showed surface root-mean-square roughness value of 95.431, 30.091 and 58.454 nm, respectively, and presented maximum microhardness of 789.5, 876.2, and 849.9 HV, respectively. Ni–TiN nanocoating obtained at 3 m/s demonstrated minimum I_corr and E_corr values of 1.02 × 10⁻³ mA/cm² and − 0.551 V, respectively, signifying to offer the best corrosion resistance.     

Characterization of silica-coated silver nanoparticles prepared by a reverse micelle and hydrolysis–condensation process

Described herein is the synthesis of individually silica-coated silver nanoparticles using a reverse micelle method followed by hydrolysis and condensation of tetraethoxysilane (TEOS). The size of a silica-coated silver nanoparticle can be controlled by changing the reaction time and the concentration of TEOS. By maintaining the size of a silver nanoparticle as a core particle at around 7 nm, the size of a silica-coated silver nanoparticle increased from 13 to 28 nm as the reaction time increased from 1 to 9 h due to an increase in silica thickness. The size of silica-coated silver nanoparticles also increased from 15 to 22 nm as the TEOS concentration increased from 7.8 to 40 mM. The size of a silica-coated silver nanoparticle can be accurately predicted using the rate of the hydrolysis reaction for TEOS. Neither the dispersion nor the film of silica-coated silver nanoparticles exhibited any peak shifting during surface plasmon resonance (SPR) at around 410 nm, whereas, without silica coating, the SPR peak of Ag film shifted to 466 nm.     

Nonvolatile memory devices based on Au/graphene oxide nanocomposites with bilateral multilevel characteristics

Current–voltage measurements on the Al/self-assembled Au nanoparticles inserted in graphene-oxide (GO) layer/indium-tin-oxide/glass devices at 300 K showed bilateral current bistabilities with four current states in a cell. The multilevel behaviors with four current states were obtained by applying different erasing voltages of −6, −12, and −18 V with a writing voltage of 3 V or different erasing voltages of 8, 14, and 18 V with a writing voltage of −5 V. The resistive memory devices demonstrated bilateral multilevel characteristics due to a nanocomposite consisting of Au nanoparticles inserted in a GO layer. The stabilities of the four current states with 1 × 10⁻¹, 1 × 10⁻⁴, 1 × 10⁻⁶, and 1 × 10⁻⁸ A achieved for the devices by using different erasing voltages were maintained for retention cycles larger than 1 × 10⁴ s under a continuous reading test. Memory operating mechanisms and multilevel characteristics based on the I–V curves were described by using the carrier-capture in the self-assembled Au nanoparticles and the local filament-path on the surface between the electrode and the GO layer.     

Electrostatic self-assembly of graphene–silver multilayer films and their transmittance and electronic conductivity

By alternating deposition of graphene oxide (GO) sheets and silver nitrate by means of an electrostatic self-assembly method, a GO–Ag⁺ film was prepared. After thermal annealing, a graphene–silver nanoparticle (GE–Ag) multilayer film, with high transparency and electrically conductivity, was obtained. The transmittance of a film with four assembly cycles was 86.3%, at a wavelength of 550 nm, better than that of a pure GE film (73.8%). While the surface resistance was 97 kΩ □^?1, much lower than that of a pure GE film (430 kΩ □^?1). The Ag nanoparticles play a crucial role in improving the properties of the GE–Ag film, acting as conductive paths and light-trapping nanoparticles, which not only reduces the reflection of the film, but also prevents the GE sheets from aggregation and provides conductive paths between sheets, improving the electrical conductivity.     

A novel,conjugated polymer containing fluorene,pyridine and unsymmetric carbazole moieties: Synthesis,protonation and electrochemical properties

An optically active, conjugated polymer bearing unsymmetric pendant carbazole chromophores was prepared via the Suzuki coupling of 9,9-dioctylfluorene-2,7-diboronic acid and a novel pyridine-containing compound. The polymer had a T_g of 192 °C and T_d10 at 437 °C under a nitrogen atmosphere and exhibited absorption bands at 320–400 nm and displayed an additional absorption bands at 380–480 nm after protonation with aq. HCl solution. The photoluminescence of the polymer shifted from 360–460 nm to 460–560 nm after protonation and the photoluminescence quantum yield of the polymer in THF solution was 0.88. The emission color of the polymer film changed from blue (439 nm) to yellow (551 nm) under an applied bias voltage of 2.5 V.     

Direct preparation of silver nanoparticles and thin films in CO2-expanded hexane

Small, uniform and suspended silver nanoparticles were directly prepared in CO₂-expanded hexane by reducing a synthesized metal precursor, silver isostearate, with hydrogen but without introducing additional capping agents. By increasing CO₂ pressure, the suspended silver nanoparticles could be further deposited on a solid substrate to form silver thin film via gas antisolvent and the subsequent supercritical drying processes. The silver thin films prepared by the aforementioned method possessed a uniform thickness of about 150 nm without surface cracking and low electrical resistivity (5.64 × 10⁻⁶ Ω cm) after applying an annealing process. Due to the deposition of nano-sized silver particles, the annealing temperature could be as low as 175 °C that is lower than the softening points of many transparent polymeric substrates used for fabrication of flexible conductive films.     

One-step electrodeposition synthesis of silver-nanoparticle-decorated graphene on indium-tin-oxide for enzymeless hydrogen peroxide detection

Silver-nanoparticles-decorated reduced graphene oxide (rGO) was electrodeposited on indium tin oxide (ITO) by a cyclic voltammetry method. The results of X-ray diffraction, Fourier-transform infrared transmission spectroscopy and Raman spectroscopy confirmed the simultaneous formation of cubic phase silver nanoparticles and reduction of GO through the electrodeposition process. Field emission scanning electron microscope images showed a uniform distribution of nanometer-sized silver nanoparticles with a narrow size distribution on the RGO sheets, which could only be achieved using silver ammonia complex instead of silver nitrate as precursor. The composite deposited on ITO exhibited notable electrocatalytic activity for the reduction of H₂O₂, leading to an enzymeless electrochemical sensor with a fast amperometric response time less than 2 s. The corresponding calibration curve of the current response showed a linear detection range of 0.1–100 mM (R² = 0.9992) while the limit of detection was estimated to be 5 μM.     

Antimicrobial and anticoagulation activity of silver nanoparticles synthesized from the culture supernatant of Pseudomonas aeruginosa

Here, we describe biosynthesis of silver nanoparticles by reduction of aqueous Ag⁺ ions with the culture supernatant of Pseudomonas aeruginosa. The morphological, physiological, biochemical and molecular level identification of the strain GS1 resembles P. aeruginosa. The nanoparticles synthesized by P. aeruginosa were characterized by UV–vis spectroscopy, dynamic light scattering (DLS) and scanning electron microscopy (SEM). The size-distribution of nanoparticles was determined using a particle-size analyzer and the average particle-size was found to be 80 nm. The biological activities of the synthesized silver nanoparticles like antimicrobial activity were confirmed against Escherichia coli and Staphylococcus aureus and it have stable anti-coagulant effect.     

Narrowing size distribution widths of small α-Al2O3 nanoparticles by addition of large nanoparticles in coagulation separation

α-Al₂O₃ nanoparticles separated by fractionated coagulation still have broad size distributions which limit their wider applications. By adding 20-time mass of large α-Al₂O₃ (40.5 nm) into α-Al₂O₃ nanoparticles to be separated in coagulation separation, the average size of separated α-Al₂O₃ nanoparticles decrease from 6.6 nm without addition of large α-Al₂O₃ NPs to 4.4 nm, and the size distribution changes from 3–10 nm without addition of large α-Al₂O₃ NPs to 3–6 nm. With increasing amount of large α-Al₂O₃ NPs added, separated α-Al₂O₃ NPs exhibit smaller average sizes and narrower size distribution widths at the same separation concentrations. This approach may be applied to narrow size distribution widths in large-scale size-selective separations of other nanoparticles.     

Stability and thermal conductivity of nanofluids of tin dioxide synthesized via microwave-induced combustion route

SnO₂ nanofluids were prepared by dispersing tin dioxide nanoparticles in deionized (DI) water as a base fluid. 4–5 nm tin dioxide crystals were synthesized via chloride solution combustion synthesis (CSCS) using SnCl₄ and sorbitol as a novel precursor and the fuel, respectively. Ammonium nitrate was also used as the combustion aid. The molar ratio of sorbitol plus ammonium nitrate to SnCl₄ was set at unity; whereas, the molar ratio of sorbitol-to-ammonium nitrate divided by that of stoichiometric value (Φ) was varied in the range of 0.5–1.4 in order to find the optimum values of specific surface area for the CSCS technique. Transition electron microscopy (TEM), scanning electron microscopy (SEM), powder X-ray diffraction (XRD), and Brunauer–Emmet–Teller (BET) techniques were employed for the characterization of the nanoparticles. Since SnO₂ nanoparticles form clusters within fluids, the fluids were ultrasonicated to improve the dispersion and stability of the nanoparticles. The colloidal stability of the SnO₂ nanofluids was quantitatively characterized by UV–vis spectrophotometric measurements. The results of the UV–vis experiments indicate higher dispersion together with enhanced stability for the nanofluid prepared by SnO₂ nanoparticles synthesized at Φ = 1.0. After 500 h sedimentation time, the relative concentration of the nanofluid with the highest stability is remained at around 77% of the initial concentration of the fluid.A transient hot-wire apparatus was used to measure the thermal conductivities of the nanofluids. In addition, the effects of pH and temperature on the thermal conductivity were also investigated. At 353 K, for the nanofluid prepared by SnO₂ nanoparticles synthesized at Φ = 1.0 at a weight fraction of 0.024%, thermal conductivity is enhanced up to about 8.7%, with an optimal pH = 8.     

Sintering kinetics of disperse ultrafine equiaxed α-Al2O3 nanoparticles

The sintering kinetics of ceramic nanoparticles is essential for preparing dense nanocrystalline ceramics with fine grains, but the sintering kinetics of disperse ultrafine α-Al₂O₃ nanoparticles has not been systematically explored so far. In this paper, the sintering kinetics of disperse ultrafine equiaxed α-Al₂O₃ nanoparticles with a mean particle size of 4.5 nm and a narrow size distribution of 2–8 nm without any agglomeration was studied systematically. Finally, α-Al₂O₃ nanocrystalline ceramic with a mean grain size of 36 nm and a relative density of 99.7% was sintered in air by two-step sintering (heated to 1100 °C without hold and then cooled down to 950 °C with a 40 h hold). The sintering temperature is the lowest for pressureless sintering of α-Al₂O₃ and almost fully dense α-Al₂O₃ nanocrystalline ceramic obtained also has the finest grain so far.     

Functionalized hectorite clay mineral for Ag(I) ions extraction from wastewater and preparation of silver nanoparticles supported clay

A novel clay mineral-based adsorbent for Ag(I) ions extraction was obtained by modifying hectorite with 2-(3-(2-aminoethylthio)propylthio)ethanamine (AEPE-hectorite). The modified hectorite was used to recover Ag(I) ions from wastewater for further preparation of silver nanoparticles supported hectorite. The parameters affecting silver ions extraction by AEPE-hectorite were investigated. The adsorbent could extract Ag(I) ions from solution in a wide pH range (1–8) and high extraction efficiencies were achieved in the solution pH ranged from 4 to 9. AEPE-hectorite showed a good selectivity toward Ag(I) ions over Co(II), Ni(II) and Cd(II) ions and the solution ionic strength had no significant effect on extraction efficiency. The adsorption of Ag(I) ions onto AEPE-hectorite followed the Freundlich isotherm model with maximum adsorption capacity observed in the experiment of 49.5 mg g^− 1. The adsorbent was successfully used to recover silver ions from a wastewater containing high concentration of silver and silver nanoparticles supported hectorite was obtained after reducing with NaBH₄. These results show an alternative in the preparation of silver nanoparticles supported clay.     

Nonlinear optical,poly(amide-imide)–clay nanocomposites comprising an azobenzene moiety synthesised via sequential self-repetitive reaction

Poly(N-acylurea)–clay nanocomposites consisting of a modified montmorillonite and poly(N-acylurea) were prepared from which poly(amide-imide)–clay nanocomposites were subsequently obtained via the sequential self-repetitive reaction of poly(N-acylurea). The moderate T_g of poly(N-acylurea) allows the nonlinear optically active polymer to exhibit high poling efficiency; in situ poling and curing increased the T_gs of poly(amide-imide)–clay nanocomposites. Electro-optical coefficients, r₃₃ of ～17–20 pm/V (830 nm), were achieved; high temporal stability (120 °C) and waveguide optical losses of 3.4–3.9 dB/cm at 1310 nm were also obtained for poly(amide-imide)–clay nanocomposites.