共查询到19条相似文献,搜索用时 125 毫秒
1.
介绍了砂型铸钢用烧结剥离型防气孔和防增碳涂料、新型浅色烧结剥离型铸铁涂料、粘土湿型砂铸造醇基喷涂涂料、代替锆英粉涂料生产中大型碳钢和合金钢铸件的铬铁矿粉涂料、防止铸件脉纹缺陷的激冷涂料和绝热涂料、高压无气喷涂机等的性能特点及应用实例,简要探讨了国内砂型铸造涂料领域的发展方向. 相似文献
2.
3.
铸造涂料中最好的耐火填料当属电熔莫来石粉和化学提纯的二氧化锆粉(含ZrO2>99.5%),其次是刚玉粉和锆英粉.但电熔莫来石粉和纯二氧化锆粉价格昂贵,刚玉粉和锆英粉也价格不菲.本文介绍的高铝粉涂料,其耐火填料高铝粉来源丰富、价格便宜,涂料的性能和使用效果可与锆英粉涂料、刚玉粉涂料媲美,是一种值得推广的铸钢、铸铁用浅色涂料.涂料由5部分组成:耐火填料、液体载体、悬浮剂、粘结剂和各种助剂. 相似文献
4.
对采用呋喃树脂自硬铬矿砂生产高铬不锈钢水轮机叶片铸件表面易出现"釉化"涂料层、界面型砂"釉化"烧结和粘砂缺陷进行了研究,并提出了解决措施.铸件粘砂的主要原因为钢液透过涂料层渗入铬矿砂,在界面发生氧化还原反应,将铬铁矿砂的铁还原出来,还原出的铁和砂粒形成致密混合物,并附着在铸件表面形成"釉化"烧结层.还原出的铁和铬渣以及砂粒中的未反应物,形成了致密的机械混合物,和铸件金属直接相连,附着在铸件的表面,形成粘砂.锆英粉涂料本身也和高铬钢发生微弱的化学反应.用新型添加剂及复合涂料改进型砂和替代锆英粉涂料,提高了钢液和铬矿砂界面涂料层的致密度、化学稳定性和耐火性,可以有效地解决这类问题. 相似文献
5.
6.
7.
8.
9.
10.
棕刚玉排尘粉涂料的研制与应用 总被引:2,自引:0,他引:2
作者在对棕刚玉排尘粉性能研究开发的基础上,研制出几种棕刚玉排尘粉涂料。已在十几个工厂应用,部分替代了价格昂贵、货源短缺的锆英粉涂料, 相似文献
11.
12.
为了获得表面光洁,尺寸精确,内部致密,无飞边毛刺的铸件,采用了聚苯乙烯泡沫塑料作为一次性气化模样,在模样上先涂挂锆英粉耐火涂料作为底层涂料,再涂挂高铝矾土耐火涂料作为衬层涂料的复合涂料层,采用呋喃树脂砂(石英砂)造型的实型铸造工艺。通过试验,确定了复合涂料层的底层涂料和衬层涂料的组成、配制、涂刷和烘干工艺,实践证明,树脂砂实型铸造是生产优质铸件的有效工艺方法,可降低生产成本,特别适合单件小批量的大型铸件的生产。 相似文献
13.
用镇江焦化煤气集团公司开发的复合碳粉,进行了替代煤粉用于铸造湿砂型的试验研究,结果发现:复合碳粉代替煤粉,可稳定和提高型砂质量,提高铸件的表面质量,并使铸件易于清理;复合碳粉在型砂中的有效含量应控制在0.9%-1.1%;复合碳粉在浇注过程中的烧减量约为12%。 相似文献
14.
15.
A multi-material hybrid patternless moulding process for complicated castings has been proposed. Moulding sands used in the hybrid moulding process include silica sand, ceramic sand, chromite sand, zircon sand, and steel shot sand. Experimental method was used to study the effects of moulding sands on the temperature field, mechanical properties, and dimensional precision of the iron castings. Under the condition that the wall thickness on different sides of the casting is the same, when the wall thickness is greater than 10 mm, the heat storage capacity of the moulding sands from strong to weak is steel shot sand, zircon sand, chromite sand, ceramic foundry sand, and silica sand. Tensile strength of the obtained castings from high to low is zircon sand, chromite sand, steel shot sand, ceramic sand, and silica sand. Contraction rate of the obtained castings from high to low is steel shot sand, zircon sand, chromite sand, silica sand, and ceramic sand. Therefore, steel shot sand and zircon sand can be used as chilled sand, and even can be used instead of cold iron when the casting wall thickness is greater than 10 mm. Zircon sand and chromite sand can be used to obtain high mechanical properties, and silica sand and ceramic sand can be selected to obtain high dimensional precision of the castings. Finally, a typical iron casting piece was tested by experiment using the hybrid moulding process. Excellent performances of iron castings confirm the feasibility of the hybrid moulding process. 相似文献
16.
17.
用EPS做模型,干砂造型在负压的状态下浇注碳钢,系统研究影响各种工艺条件下EPC法生产碳钢件内部增碳的因素。发现模型分别用石英粉、刚玉粉、锆英粉3种涂料涂覆,浇注碳钢件均有内部增碳现象发生,其中使用石英粉涂料的铸件内部增碳较小,采用底注式浇注,同一铸件随着铸件高度的增加,内部增碳增加。另外,随真空度的增加内部增碳减小。 相似文献
18.
论文介绍了粘土湿型砂铸造新型醇基喷涂涂料的组成结构、性能特点、应用实例和使用经验.粘土湿型砂铸造新型醇基喷涂涂料的主要性能达到了国内外同类产品领先水平;生产的高锰钢、可锻铸铁和灰口铸铁产品表面光洁,无粘砂、气孔等缺陷. 相似文献