A 35-ns 128K/spl times/8 CMOS SRAM

A 128 K/spl times/8-b CMOS SRAM with TTL input/output levels and a typical address access time of 35 ns is described. A novel data transfer circuit with dual threshold level is utilized to obtain improved noise immunity. A divided-word-line architecture and an automatic power reduction function are utilized to achieve a low operational power of 10 mW at 1 MHz, and 100 mW at 10 MHz. A novel fabrication technology, including improved LOCOS and highly stable polysilicon loads, was introduced to achieve a compact memory cell which measures 6.4/spl times/11.5 /spl mu/m/SUP 2/. Typical standby current is 2 /spl mu/A. The RAM was fabricated with 1.0-/spl mu/m design rules, double-level polysilicon, and double-level aluminum CMOS technology. The chip size of the RAM is 8/spl times/13.65 mm/SUP 2/.     

A 128K word/spl times/8 bit dynamic RAM

A 1-Mb DRAM with 128K/spl times/8 bit organization is described. In designing the circuit, half V/SUB cc/ bit line precharge with dummy reverse circuits was adopted for noise reduction. The noise is estimated using a three-dimensional capacitance calculation. In realizing the chip, a 1-/spl mu/m NMOS process with double-level aluminum wiring was used.     

A 1000 FPS at 128/spl times/128 vision processor with 8-bit digitized I/O

This paper presents a mixed-signal programmable chip for high-speed vision applications. It consists of an array of processing elements, arranged to operate in accordance with the principles of single instruction multiple data (SIMD) computing architectures. This chip, implemented in a 0.35-/spl mu/m fully digital CMOS technology, contains /spl sim/ 3.75 M transistors and exhibits peak performance figures of 330 GOPS (8-bit equivalent giga-operations per second), 3.6 GOPS/mm/sup 2/ and 82.5 GOPS/W. It includes structures for image acquisition and for image processing, meaning that it does not require a separate imager for operation. At the sensory side, integration and log-compression sensing circuits are embedded, thus allowing the chip to handle a large variety of illumination conditions. At the processing plane, analog and digital circuits are employed whose parameters can be programmed and their architecture reconfigured for the realization of software-coded processing algorithms. The chip provides, and accepts, 8-bit digitized data through a 32-bit bidirectional data bus which operates at 120 MB/s. Experimental results show that frame rates of 1000 frames per second (FPS) can be achieved under room illumination conditions; applications using exposures of about 50 /spl mu/s have been recently reached by using special illumination setups. The chip can capture an image, run approximately 150 two-dimensional linear convolutions, and download the result in 8-bit digital format, in less than 1 ms. This feature, together with the possibility of executing sequences of user-definable instructions (stored on a full-custom 32-kb on-chip memory), and storing intermediate results (up to 8 grayscale images) makes the chip a true general-purpose sensory/processing device.     

Design and performance testing of a 2.29-GB/s Rijndael processor

This contribution describes the design and performance testing of an Advanced Encryption Standard (AES) compliant encryption chip that delivers 2.29 GB/s of encryption throughput at 56 mW of power consumption in a 0.18-/spl mu/m CMOS standard cell technology. This integrated circuit implements the Rijndael encryption algorithm, at any combination of block lengths (128, 192, or 25 bits) and key lengths (128, 192, or 256 bits). We present the chip architecture and discuss the design optimizations. We also present measurement results that were obtained from a set of 14 test samples of this chip.     

A 65 mW 128K EB-ROM

A low power read-only memory (128K EB-ROM) has been developed using direct electron-beam data writing and 2 /spl mu/m VLSI fabrication technology. Programming of information in the ROM is accomplished by selective use of a field oxide in place of a thin gate oxide. The memory cell array is divided into eight current discharge (CD) units. Only one of the eight CD units, which contains a selected cell, is activated by the 3-bit extra decoder. The large capacitance enlarged by the Miller effect is markedly reduced. Moreover, the total capacitance to be precharged is also reduced. High performance output buffer circuitry is adopted, which has a high logic threshold voltage. As a result, the fabricated 128K EB-ROM is capable of 65 mW power dissipation under 400 ns cycle time and 5 V DC supply voltage conditions and 200 ns access time. Memory cell and chip dimensions are 8 /spl mu/m/spl times/7.75/spl mu/m and 3.75 mm/spl times/5.5 mm, respectively.     

A 25-ns 1-Mbit CMOS SRAM with loading-free bit lines

A 128 K/spl times/8-b CMOS SRAM is described which achieves a 25-ns access time, less than 40-mA active current at 10 MHz, and 2-/spl mu/A standby current. The novel bit-line circuitry (loading-free bit line), using two kinds of NMOSFETs with different threshold voltages, improves bit-line signal speed and integrity. The two-stage local amplification technique minimizes the data-line delay. The dynamic double-word-line scheme (DDWL) allows the cell array to be divided into 32 sections along the word-line direction without a huge increase in chip area. This allows the DDWL scheme to reduce the core-area delay time and operating power to about half that of other conventional structures. A double-metal 0.8-/spl mu/m twin-tub CMOS technology has been developed to realize the 5.6/spl times/9.5-/spl mu//SUP 2/ cell size and the 6.86/spl times/15.37-mm/SUP 2/ chip size.     

A 128-kb FeRAM macro for contact/contactless smart-card microcontrollers

This paper describes a 128-kb FeRAM macro for smart-card microcontrollers. This macro, which was designed and fabricated using a 0.35-/spl mu/m three-metal CMOS and a Capacitor-on-Metal/Via-stacked-Plug (CMVP) process technology, is ideally suited for recent system LSIs such as smart-card microcontrollers. It has a flexible memory size ranging from 32 to 128 kb, a low consumption current of 0.3 mA, and endurance of more than 10/sup 8/ write/read cycles under a wide range of supply voltages, from 2.7 to 5.5 V. These characteristics, which are required of not only contact-type smart-card microcontrollers but also contactless-type ones, were achieved by using four newly developed circuit technologies: 1) a three-metal CMVP memory cell; 2) a voltage-regulating architecture; 3) a main/sub bitline and wordline structure; and 4) a dynamic-type offset sense amplifier.     

A high-speed 128-kb MRAM core for future universal memory applications

A 128-kb magnetic random access memory (MRAM) test chip has been fabricated utilizing, for the first time, a 0.18-/spl mu/m V/sub DD/=1.8 V logic process technology with Cu metallization. The presented design uses a 1.4-/spl mu/m/sup 2/ one-transistor/one-magnetic tunnel junction (1T1MTJ) cell and features a symmetrical high-speed sensing architecture using complementary reference cells and configurable load devices. Extrapolations from test chip measurements and circuit assessments predict a 5-ns random array read access time and random write operations with <5-ns write pulse width.     

New miniature 15-20-GHz continuous-phase/amplitude control MMICs using 0.18-/spl mu/m CMOS technology

The design and performance of two new miniature 360/spl deg/ continuous-phase-control monolithic microwave integrated circuits (MMICs) using the vector sum method are presented. Both are implemented using commercial 0.18-/spl mu/m CMOS process. The first phase shifter demonstrates all continuous phase and an insertion loss of 8 dB with a 37-dB dynamic range from 15 to 20 GHz. The chip size is 0.95 mm /spl times/ 0.76 mm. The second phase shifter can achieve all continuous phase and an insertion loss of 16.2 dB with a 38.8-dB dynamic range at the same frequency range. The chip size is 0.71 mm /spl times/ 0.82 mm. To the best of the authors' knowledge, these circuits are the first demonstration of microwave CMOS phase shifters using the vector sum method with the smallest chip size for all MMIC phase shifters with 360/spl deg/ phase-control range above 5 GHz reported to date.     

A 9-V/Lux-s 5000-frames/s 512/spl times/512 CMOS sensor

A high-responsivity 9-V/Lux-s high-speed 5000-frames/s (at full 512/spl times/512 resolution) CMOS active pixel sensor (APS) is presented in this paper. The sensor was designed for a 0.35-/spl mu/m 2P3M CMOS sensor process and utilizes a five-transistor pixel to provide a true parallel shutter. Column-parallel analog-to-digital converter (ADC) architecture yields fast readout from pixels and digitization of the data simultaneously with acquiring a new frame. The chip has a two-row SRAM to store data from the ADC and read previous rows of data out of the chip. There are a total of 16 parallel ports operating up to 90 MHz delivering /spl sim/1.3 Gpixel/s or 13 Gb/s of data at the maximum rate. In conclusion, a comparison between two high-speed digital CMOS sensor architectures, which are a column-parallel APS and a digital pixel sensor (DPS), is conducted.     

An ultralow power 8K/spl times/8-bit full CMOS RAM with a six-transistor cell

A fully static 8K word by 8 bit CMOS RAM, with a six-transistor CMOS cell structure to achieve an extremely low standby power of less than 50 nW has been developed. A 2 /spl mu/m, double polysilicon CMOS process was utilized to realize a 19/spl times/22 /spl mu/m cell size. Redundance technology with polysilicon laser fuses was also developed for improving fabrication yield with relatively large chip size, i.e. 5.92/spl times/7.49 mm. In addition, for reducing operational power dissipation while maintaining fully static operation from outside on the chip, an internally clocked low-power circuit technology using row address transition detectors was employed, which results in only 15 mW operational power at 1 MHz by cutting off all DC current paths. The RAM offers an 80 ns address access time.     

A 0.18-/spl mu/m CMOS bioluminescence detection lab-on-chip

The paper describes a bioluminescence detection lab-on-chip consisting of a fiber-optic faceplate with immobilized luminescent reporters/probes that is directly coupled to an optical detection and processing CMOS system-on-chip (SoC) fabricated in a 0.18-/spl mu/m process. The lab-on-chip is customized for such applications as determining gene expression using reporter gene assays, determining intracellular ATP, and sequencing DNA. The CMOS detection SoC integrates an 8 /spl times/ 16 pixel array having the same pitch as the assay site array, a 128-channel 13-bit ADC, and column-level DSP, and is fabricated in a 0.18-/spl mu/m image sensor process. The chip is capable of detecting emission rates below 10/sup -6/ lux over 30 s of integration time at room temperature. In addition to directly coupling and matching the assay site array to the photodetector array, this low light detection is achieved by a number of techniques, including the use of very low dark current photodetectors, low-noise differential circuits, high-resolution analog-to-digital conversion, background subtraction, correlated multiple sampling, and multiple digitizations and averaging to reduce read noise. Electrical and optical characterization results as well as preliminary biological testing results are reported.     

A sub-10-ns 16/spl times/16 multiplier using 0.6-/spl mu/m CMOS technology

A 16/spl times/16-b parallel multiplier fabricated in a 0.6-/spl mu/m CMOS technology is described. The chip uses a modified array scheme incorporated with a Booth's algorithm to reduce the number of adding stages of partial products. The combination of scaled 0.6-/spl mu/m CMOS technology and advanced arithmetic architecture achieves a multiplication time of 7.4 ns while dissipating only 400 mW. This multiplication time is shorter than other MOS high-speed multipliers previously reported and is comparable to those for advanced bipolar and GaAs multipliers.     

A 2 V 1.8 GHz fully integrated CMOS dual-loop frequency synthesizer

A 2 V 1.8 GHz fully integrated CMOS dual-loop frequency synthesizer is designed in a standard 0.5 /spl mu/m digital CMOS process for wireless communication. The voltage-controlled oscillator (VCO) required for the low-frequency loop is designed using a ring-type VCO and achieves a tuning range of 89% from 356 to 931 MHz and a phase noise of -109.2 dBc/Hz at 600 kHz offset from 856 MHz. With an active chip area of 2000/spl times/1000 /spl mu/m/sup 2/ and at a 2 V supply voltage, the whole synthesizer achieves a tuning range from 1.8492 to 1.8698 GHz in 200 kHz steps with a measured phase noise of -112 dBc/Hz at 600 kHz offset from 1.86 GHz. The measured settling time is 128 /spl mu/s and the total power consumption is 95 mW.     

120-ns 128 K*8-bit/64 K*16-bit CMOS EEPROMs

A 1-Mbit CMOS full-featured EEPROM using a 1.0- mu m triple-polysilicon and double-metal process is described. The design is aimed at developing a manufacturable 120-ns 1-Mbit EEPROM with small chip size. Therefore, an advanced memory cell with high read current, an improved differential sensing technique, and an efficient ECC scheme are developed. The differential sensing amplifier utilizes the output of a current sensing amplifier connected to unselected memory as a reference level. The cell size is 3.8*8 mu m/sup 2/ and the chip size is 7.73*11.83 mm/sup 2/. The device is organized as either 128 K*8 or 64 K*16 by via-hole mask options. A 256-byte/128-word page-mode programming is implemented.<>     

A CMOS voltage reference based on weighted /spl Delta/V/sub GS/ for CMOS low-dropout linear regulators

A CMOS voltage reference, which is based on the weighted difference of the gate-source voltages of an NMOST and a PMOST operating in saturation region, is presented. The voltage reference is designed for CMOS low-dropout linear regulators and has been implemented in a standard 0.6-/spl mu/m CMOS technology (V/sub thn//spl ap/|V/sub thp/|/spl ap/0.9 V at 0/spl deg/C). The occupied chip area is 0.055 mm/sup 2/. The minimum supply voltage is 1.4 V, and the maximum supply current is 9.7 /spl mu/A. A typical mean uncalibrated temperature coefficient of 36.9 ppm//spl deg/C is achieved, and the typical mean line regulation is /spl plusmn/0.083%/V. The power-supply rejection ratio without any filtering capacitor at 100 Hz and 10 MHz are -47 and -20 dB, respectively. Moreover, the measured noise density with a 100-nF filtering capacitor at 100 Hz is 152 nV//spl radic/(Hz) and that at 100 kHz is 1.6 nV//spl radic/(Hz).     

A 25-MS/s 14-b 200-mW /spl Sigma//spl Delta/ Modulator in 0.18-/spl mu/m CMOS

The design of a fifth-order 4-b quantizer single-loop /spl Sigma//spl Delta/ modulator is presented that achieves 25-MS/s conversion rate with 84 dB of dynamic range and 82 dB of signal-to-noise ratio. Implemented in a 0.18-/spl mu/m CMOS technology, the 0.95-mm/sup 2/ chip has a power consumption of 200 mW from a 1.8-V supply.     

A 0.3-25-GHz ultra-wideband mixer using commercial 0.18-/spl mu/m CMOS technology

An ultra-wideband mixer using standard complementary metal oxide semiconductor (CMOS) technology was first proposed in this paper. This broadband mixer achieves measured conversion gain of 11 /spl plusmn/ 1.5 dB with a bandwidth of 0.3 to 25 GHz. The mixer was fabricated in a commercial 0.18-/spl mu/m CMOS technology and demonstrated the highest frequency and bandwidth of operation. It also presented better gain-bandwidth-product performance compared with that of GaAs-based HBT technologies. The chip area is 0.8 /spl times/ 1 mm/sup 2/.     

CMOS image sensor with mixed-signal processor array

We present a single-chip integration of a CMOS image sensor with an embedded flexible processing array and dedicated analog-to-digital converter. The processor array is designed to perform convolution and transformation algorithms with arbitrary kernels. It has been designed to carry out the multiplication of analog image data with given digital kernel coefficients and to add up the results. The processor array is an analog implementation of a highly parallel architecture which is scalable to any desired sensor resolution while preserving video-rate operation. A prototype implementation has been realized in a 0.6-/spl mu/m CMOS technology. Switched current technique has been applied to obtain compact and robust circuits. The prototype's sensor resolution is 64 /spl times/ 128 pixels. The processor array occupies a small chip area and consumes only a small percentage of the power (250 /spl mu/W) of the whole image sensor.     

0.13-/spl mu/m low-/spl kappa/-Cu CMOS logic-based technology for 2.1-gb high data rate read-channel

High-performance analog/digital elements have been successfully fabricated by a 0.13-/spl mu/m low-/spl kappa/-Cu logic-based mixed-signal CMOS process in a single chip to enable a 2.1-Gb/s read-channel for hard disk drives that is a record-high data rate supported by fully CMOS solution. The high-performance analog devices demonstrate superior drivability, matching, noise immunity, and reliability by a unique dual-gate oxide module to support the aggressive oxide thickness scaling and maintain promisingly good reliability in all aspects.