新颖的第三代太阳能电池

为了开发清洁新能源,太阳能电池成为人们研究的热点.简要介绍了第三代太阳电池的发展现状,阐述了叠层电池、中间带太阳电池、热载流子太阳电池等第三代太阳能电池的设计原理,分析了各种新概念太阳能电池在发展中存在的问题和未来发展的方向.     

Integrated Perovskite/Bulk-Heterojunction Organic Solar Cells

The recently emerged integrated perovskite/bulk-heterojunction (BHJ) organic solar cells (IPOSCs) without any recombination layers have generated wide attention. This type of device structure can take the advantages of tandem cells using both perovskite solar and near-infrared (NIR) BHJ organic solar materials for wide-range sunlight absorption and the simple fabrication of single junction cells, as the low bandgap BHJ layer can provide additional light harvesting in the NIR region and the high open-circuit voltage can be maintained at the same time. This progress report highlights the recent developments in such IPOSCs and the possible challenges ahead. In addition, the recent development of perovskite solar cells and NIR organic solar cells is also covered to fully underline the importance and potential of IPOSCs.     

诱导性多潜能干细胞(iPS)研究：现状与展望

通过特定的基因组合与转染可以将已分化的体细胞诱导重编程为多潜能干细胞(iPS),是近年来干细胞研究领域最令人瞩目的一项新的干细胞制造技术.与胚胎干细胞(ES)不同,iPS细胞的制造不需要毁损胚胎,因而不会涉及更多的伦理学问题.iPS的出现不仅为体细胞重编程去分化机制的研究注入了新的活力,而且为疾病发生发展相关机制研究与特异的细胞治疗,特别是再生医学带来新的曙光.目前,iPS的研究尚处于初级阶段,文章就iPS的研究现状与应用前景进行综述和展望.     

Transdifferentiation of autologous bone marrow cells on a collagen-poly(ε-caprolactone) scaffold for tissue engineering in complete lack of native urothelium

Urological reconstructive surgery is sometimes hampered by a lack of tissue. In some cases, autologous urothelial cells (UCs) are not available for cell expansion and ordinary tissue engineering. In these cases, we wanted to explore whether autologous mesenchymal stem cells (MSCs) from bone marrow could be used to create urological transplants. MSCs from human bone marrow were cultured in vitro with medium conditioned by normal human UCs or by indirect co-culturing in culture well inserts. Changes in gene expression, protein expression and cell morphology were studied after two weeks using western blot, RT-PCR and immune staining. Cells cultured in standard epithelial growth medium served as controls. Bone marrow MSCs changed their phenotype with respect to growth characteristics and cell morphology, as well as gene and protein expression, to a UC lineage in both culture methods, but not in controls. Urothelial differentiation was also accomplished in human bone marrow MSCs seeded on a three-dimensional poly(ε-caprolactone) (PCL)–collagen construct. Human MSCs could easily be harvested by bone marrow aspiration and expanded and differentiated into urothelium. Differentiation could take place on a three-dimensional hybrid PCL-reinforced collagen-based scaffold for creation of a tissue-engineered autologous transplant for urological reconstructive surgery.     

Historical Analysis of High-Efficiency,Large-Area Solar Cells: Toward Upscaling of Perovskite Solar Cells

The status and problems of upscaling research on perovskite solar cells, which must be addressed for commercialization efforts to be successful, are investigated. An 804 cm² perovskite solar module has been reported with 17.9% efficiency, which is significantly lower than the champion perovskite solar cell efficiency of 25.2% reported for a 0.09 cm² aperture area. For the realization of upscaling high-quality perovskite solar cells, the upscaling and development history of conventional silicon, copper indium gallium sulfur/selenide and CdTe solar cells, which are already commercialized with modules of sizes up to ≈25 000 cm², are reviewed. GaAs, organic, dye-sensitized solar cells and perovskite/silicon tandem solar cells are also reviewed. The similarities of the operating mechanisms between the various solar cells and the origin of different development pathway are investigated, and the ideal upscaling direction of perovskite solar cells is subsequently proposed. It is believed that lessons learned from the historical analysis of various solar cells provide a fundamental diagnosis of relative and absolute development status of perovskite solar cells. The unique perspective proposed here can pave the way toward the upscaling of perovskite solar cells.     

Advances in Solution‐Processed Multijunction Organic Solar Cells

The efficiency of organic solar cells can benefit from multijunction device architectures, in which energy losses are substantially reduced. Herein, recent developments in the field of solution‐processed multijunction organic solar cells are described. Recently, various strategies have been investigated and implemented to improve the performance of these devices. Next to developing new materials and processing methods for the photoactive and interconnecting layers, specific layers or stacks are designed to increase light absorption and improve the photocurrent by utilizing optical interference effects. These activities have resulted in power conversion efficiencies that approach those of modern thin film photovoltaic technologies. Multijunction cells require more elaborate and intricate characterization procedures to establish their efficiency correctly and a critical view on the results and new insights in this matter are discussed. Application of multijunction cells in photoelectrochemical water splitting and upscaling toward a commercial technology is briefly addressed.     

Highly Efficient and Stable Flexible Perovskite Solar Cells with Metal Oxides Nanoparticle Charge Extraction Layers

In this study, the fabrication of highly efficient and durable flexible inverted perovskite solar cells (PSCs) is reported. Presynthesized, solution‐derived NiO_x and ZnO nanoparticles films are employed at room temperature as a hole transport layer (HTL) and electron transport layer (ETL), respectively. The triple cation perovskite films are produced in a single step and for the sake of comparison, ultrasmooth and pinhole‐free absorbing layers are also fabricated using MAPbI₃ perovskite. The triple cation perovskite cells exhibit champion power conversion efficiencies (PCEs) of 18.6% with high stabilized power conversion efficiency of 17.7% on rigid glass/indium tin oxide (ITO) substrates (comparing with 16.6% PCE with 16.1% stabilized output efficiency for the flexible polyethylene naphthalate (PEN)/thin film barrier/ITO substrates). More interestingly, the durability of flexible PSC under simulation of operative condition is proved. Over 85% of the maximum stabilized output efficiency is retained after 1000 h aging employing a thin MAPbI₃ perovskite (over 90% after 500 h with a thick triple cation perovskite). This result is comparable to a similar state of the art rigid PSC and represents a breakthrough in the stability of flexible PSC using ETLs and HTLs compatible with roll to roll production speed, thanks to their room temperature processing.     

A fission-fragment-sensitive target for X-ray spectroscopy in neutron-induced fission

A fission-fragment-sensitive detector built for low-energy photon spectroscopy applications at the WNR “white” neutron source at Los Alamos is described. The detector consists of eight layers of thin photovoltaic cells, onto which 1 mg/cm² of pure ²³⁸U is deposited. The detector serves as an active target to select fission events from background and other reaction channels. The fairly small thickness of the detector with respect to transmission of 20–50 keV photons permits the measurement of prompt fission-fragment X-rays. Results with the GEANIE photon spectrometer are presented.     

In Situ Transmission Electron Microscopy for Energy Materials and Devices

Energy devices such as rechargeable batteries, fuel cells, and solar cells are central to powering a renewable, mobile, and electrified future. To advance these devices requires a fundamental understanding of the complex chemical reactions, material transformations, and charge flow that are associated with energy conversion processes. Analytical in situ transmission electron microscopy (TEM) offers a powerful tool for directly visualizing these complex processes at the atomic scale in real time and in operando. Recent advancements in energy materials and devices that have been enabled by in situ TEM are reviewed. First, the evolutionary development of TEM nanocells from the open‐cell configuration to the closed‐cell, and finally the full‐cell, is reviewed. Next, in situ TEM studies of rechargeable ion batteries in a practical operation environment are explored, followed by applications of in situ TEM for direct observation of electrocatalyst formation, evolution, and degradation in proton‐exchange membrane fuel cells, and fundamental investigations of new energy materials such as perovskites for solar cells. Finally, recent advances in the use of environmental TEM and cryogenic electron microscopy in probing clean‐energy materials are presented and emerging opportunities and challenges in in situ TEM research of energy materials and devices are discussed.     

Organic Photovoltaics over Three Decades

The development of organic semiconductors for photovoltaic devices, over the last three decades, has led to unexpected performance for an alternative choice of materials to convert sunlight to electricity. New materials and developed concepts have improved the photovoltage in organic photovoltaic devices, where records are now found above 13% power conversion efficiency in sunlight. The author has stayed with the topic of organic materials for energy conversion and energy storage during these three decades, and makes use of the Hall of Fame now built by Advanced Materials, to present his view of the path travelled over this time, including motivations, personalities, and ambitions.     

Recent Progress in Molecular Design of Fused Ring Electron Acceptors for Organic Solar Cells

The quest for sustainable energy sources has led to accelerated growth in research of organic solar cells (OSCs). A solution‐processed bulk‐heterojunction (BHJ) OSC generally contains a donor and expensive fullerene acceptors (FAs). The last 20 years have been devoted by the OSC community to developing donor materials, specifically low bandgap polymers, to complement FAs in BHJs. The current improvement from ≈2.5% in 2013 to 17.3% in 2018 in OSC performance is primarily credited to novel nonfullerene acceptors (NFA), especially fused ring electron acceptors (FREAs). FREAs offer unique advantages over FAs, like broad absorption of solar radiation, and they can be extensively chemically manipulated to tune optoelectronic and morphological properties. Herein, the current status in FREA‐based OSCs is summarized, such as design strategies for both wide and narrow bandgap FREAs for BHJ, all‐small‐molecule OSCs, semi‐transparent OSC, ternary, and tandem solar cells. The photovoltaics parameters for FREAs are summarized and discussed. The focus is on the various FREA structures and their role in optical and morphological tuning. Besides, the advantages and drawbacks of both FAs and NFAs are discussed. Finally, an outlook in the field of FREA‐OSCs for future material design and challenges ahead is provided.