网络环境下的存储技术与设备选择

介绍了网络环境下信息的三种网络存储技术,即直接连接存储(DAS)、网络连接存储(NAS)和存储局域网络(SAN),比较了它们的差别及适用环境,在此基础上提出了高校图书馆环境下网络存储设备的选择策略.     

空调蓄冷及固体吸附蓄冷技术

介绍了目前空调工程中常用的蓄冷技术及其各自特点,分析了固体吸附蓄冷技术及其应用.     

固体吸附蓄冷在空调工程中的应用展望

介绍了目前空调工程中常用的蓄冷技术及其各自特点,提出了固体吸附蓄冷技术,拟把固体吸附蓄冷应用于空调工程领域。     

实现超高密度信息存储的最新进展

超高密度信息存储是信息科学发展的基石,本文综述了超高密度信息存储的材料及技术等方面的目的的研究进展。     

永定红柿最适贮藏温度研究

柿果在常温贮藏过程中容易软化、褐变和腐烂,食用品质受到很大影响。因此本文主要研究了柿子的最适贮藏温度,旨在探明低温贮藏对柿子食用品质的影响。研究结果如下,以柿果感观品质、呼吸强度、可溶性糖含量、Vc含量、失重率、可滴定酸含量为考核指标,探讨了贮藏温度与柿果贮藏品质的关系。结果表明：在0℃-2℃下贮藏的柿子能够保持良好的色泽和较高硬度,呼吸强度、失重率较低,可溶性糖含量、Vc含量、可滴定酸等营养成分保持得较好。     

On sequencing policies for unit-load automated storage and retrieval systems

Automated Storage and Retrieval System (AS/RS) performance highly depends on the characteristics of the mechanical equipment. However, once the system has been physically implemented, achieving its maximum efficiency depends on the way the system is operated. This paper shows that request sequencing (i.e. planning the order in which storage and retrieval requests are performed) is of paramount importance in AS/RS performance. This paper reviews and adapts the most popular storage and sequencing policies to dynamic contexts, and then it proposes a ‘sequencing mathematical model’ (SMM) to simultaneously solve the sequencing and storage location problems. Extensive computational results based on a thorough simulation experiment plan confirm that performing the requests in the right sequence can have a positive impact on AS/RS performance. Our results show that the proposed SMM regularly outperforms other methods. When used in a dynamic context, the proposed SMM may yield up to a 25% reduction in average travel-time compared to the situation where a no-sequencing method is applied.     

性能贮存可靠性评估及贮存寿命预测方法

在介绍贮存可靠性与条件贮存可靠性的基础上,针对一次性产品的性能贮存可靠性试验的特点,提出了性能贮存可靠性评估及贮存寿命预测的基本思路和方法。通过算例说明了本文提出的评估和预测思路的可行性与合理性,同时也分析了这种贮存可靠性评估和寿命预测方法对于一次性产品的适用范围。     

大容量电力储能调峰调频性能综述

新能源大规模并网后带来电网频率调节问题,大容量电力储能技术是有效解决途径之一。通过对电力储能的类型和应用场景进行分析,指出在电网调峰调频发挥作用的大容量储能有电化学储能、抽水蓄能、飞轮储能以及压缩空气储能4种类型,介绍了这4种大容量电力储能的性能特点,对其参与电网调峰、一次调频、二次调频性能进行综述,比较各种大容量电力储能调峰调频的特性,指出下一步研究发展趋势。     

A Scalable Double-Chain Storage Module for Blockchain

With the growing maturity of blockchain technology, its peer-to-peer model and fully duplicated data storage pattern enable blockchain to act as a distributed ledger in untrustworthy environments. Blockchain storage has also become a research hotspot in industry, finance, and academia due to its security, and its unique data storage management model is gradually becoming a key technology to play its value in various fields’ applications. However, with the increasing amount of data written into the blockchain, the blockchain system faces many problems in its actual implementation of the application, such as high storage space occupation, low data flexibility and availability, low retrieval efficiency, poor scalability, etc. To improve the above problems, this paper combines off-chain storage technology and de-duplication technology to optimize the blockchain storage model. Firstly, this paper adopts the double-chain model to reduce the data storage of the major chain system, which stores a small amount of primary data and supervises the vice chain through an Application Programming Interface (API). The vice chain stores a large number of copies of data as well as non-transactional data. Our model divides the vice chain storage system into two layers, including a storage layer and a processing layer. In the processing layer, deduplication technology is applied to reduce the redundancy of vice chain data. Our double-chain storage model with high scalability enhances data flexibility, is more suitable as a distributed storage system, and performs well in data retrieval.     

高温水蓄冷过冷空调系统性能研究

阐述了高温水蓄冷过冷空调系统原理，对该新型蓄冷过冷空调系统若干方案进行了选择，特别是对蓄冷水箱的掺混度进行了研究，建立了空调用蓄冷水箱内温度分层特性数理模型，模拟了蓄冷水箱内温度分布规律，并与实验值进行了比较，两者基本吻合，该模型可为水蓄冷系统储水相的设计和运行提供理论依据。     

小型冰蓄冷空调研究

介绍了国内外小型冰蓄冷空调技术的发展现状。然后以某21 kW别墅蓄能空调系统为例阐述了小型冰蓄冷空调系统的原理组成,在此基础上对该系统蓄冰槽的选型设计进行了分析探讨。最后列举了小型冰蓄冷空调今后发展遇到的一些问题。     

蓄冷空调——更有效利用能源的新出路

针对空调用电不断增加和能源紧张的局面,阐述了蓄冷空调对平衡电网负荷、移峰填谷的作用,以及在日常生活中比较常见的几种蓄冷方式,介绍其优缺点和应用前景。阐明了蓄冷空调既是今后空调节能的主要发展方向,也是解决用电高峰期和低谷期的负荷相差很大所引起的能量不必要浪费的有效手段。     

氢化燃烧合成Mg-Mg2Ni储氢合金组成和性能研究

利用氢化燃烧合成法制备了镁基储氢合金Mg-Mg2Ni,分析了镁镍配比和镁粉粒径对HCS产物组成和储氢性能的影响.研究结果表明,HCS产物主要由Mg2Ni及Mg的氢化物MgH2、Mg2NiH4和Mg2NiH0.3组成,没有Ni相的存在,当Mg:Ni＞2:1时,较粗镁粉原料的使用对燃烧合成产物Mg2Ni的氢化活性影响不大,但会降低反应剩余Mg的氢化活性.随原料中镁镍配比的增加,HCS产物中MgH2的相对含量逐渐增加,HCS产物的氢化动力学性能逐渐降低,吸氢量却先增加后降低,Mg:Ni=7.85:1时具有最大的吸氢量4.87wt.%,同时由较细镁粉得到的HCS产物的氢化速率和吸氢量大于较粗镁粉,但两者之间的差别会随镁镍配比的降低而减小.     

小型蓄冷空调系统研究

本文阐述小型蓄冷空调系统的工作原理和循环系统，并通过实验分析了相变蓄冷材料的凝固点、融解点、融解热等热学性能。在热性能分析中，用示差扫描量热仪(DSC)来测定蓄冷材料的融解热，用温度测量仪器来测定蓄冷材料的凝固点和融解点，通过热性能分析找到了一种新型蓄冷材料，该蓄冷材料可被应用于小型蓄冷空调系统中。     

An efficient cycle time model for autonomous vehicle storage and retrieval systems

A computationally efficient cycle time model for conceptualizing autonomous vehicle storage and retrieval systems and comparing their performance with crane-based automated storage and retrieval systems is presented. The model is based on an iterative computational scheme exploiting random storage assumptions and queuing model approximations. Relative to earlier models, the procedure scales up efficiently for large problems thereby enabling more extensive search of a design solution space. Simulation based validation studies suggest that model accuracy is adequate for system conceptualization. The procedure is demonstrated using realistically sized sample problems.     

Heuristic algorithms for a storage location assignment problem in a chaotic warehouse

The extensive application of emerging technologies is revolutionizing warehouse management. These technologies facilitate working with complex and powerful warehouse management models in which products do not have assigned fixed locations (random storage). Random storage allows the utilization of the available space to be optimized. In this context, and motivated by a real problem, this article presents a model that looks for the optimal allocation of goods in order to maximize the storage space availability within the restrictions of the warehouse. For the proposed model a construction method, a local search algorithm and different metaheuristics have been developed. The introduced algorithms can also be used for other purposes such as to assess when and how it is convenient to perform relocation of stored items to improve the current level of storage space availability. Computational tests performed on a set of randomly generated and real warehouse instances show the effectiveness of the proposed methods.     

蓄冷空调技术的现状及发展趋势

阐述应用蓄冷空调的意义及其发展现状，介绍各种类型的蓄冷空调系统，指出蓄冷空调技术今后的发展趋势。     

基于STM/AFM技术的信息存储材料研究现状及进展

信息技术的发展要求存储器件必须具备超高存储密度、超快的存取速率，因而能在纳米尺度上实现信息存储功能的新型超高密度信息存储材料已经成为信息技术领域的研究热点。简要地介绍了近年来利用扫描隧道显微镜／原子力显微镜（STM／AFM）实现信息写入的纳米信息存储材料的研究进展，并进一步列举了尚待解决的问题。     

La0.7-xPrxZr0.1Mg0.2Ni2.75Co0.45Fe0.1Al0.2 (x=0.00,0.05,0.10, 0.15,0.20)合金储氢及电化学性能研究

在Ar气保护下,采用高频感应悬浮炉制备La0.7-xPrxZr0.1Mg0.2Ni2.75Co0.45Fe0.1Al0.2(x=0.00,0.05,0.10,0.15,0.20)合金,研究Pr替代La对合金电极电化学性能的影响。结果显示,所有合金主要由LaNi5和La2Ni7相组成,以Pr替代La后,LaNi5相和La2Ni7合金相的晶胞收缩,导致氢原子在合金电极体内扩散受限,合金电极的动力学性能下降。但由于Pr的抗腐蚀作用,合金电极循环稳定性增加,经过200次充放电循环后容量保持率分别从66.2%(x=0.00)逐渐增加到69.5%(x=0.05)、73.2%(x=0.10)、74.0%(x=0.15)和75.1%(x=0.20)。     

冷库加工间空调设计概述

对冷库加工间负荷情况进行了定性分析，通过与常规空调的比较，提出了冷库加工间需要注意的几点事项。