13C n.m.r. study of raw materials for carbon black

¹³C n.m.r. spectroscopy has been applied to investigate a number of coal tar and petroleum-derived carbon black feedstocks. Application of the J-modulated spin echo technique is especially rewarding, as this method renders the quaternary carbons directly detectable. Thus the quality of carbon black feedstocks can additionally be gauged on the basis of the contents of quaternary carbons, which is a direct indication of the carbon yield in the carbon black production process.     

Estimation of aliphatic H/C ratios for coal liquefaction products by spin-echo 13C n.m.r.

The direct estimation of aliphatic H/C ratios for coal liquefaction products using a part-coupled spinecho (PCSE) ¹³C n.m.r. method is described. The method, which enables proportions of aliphatic C, CH, CH₂ and CH₃ groups to be deduced, has been applied to a low molecular weight (<200) aromatic fraction of hydrogenated anthracene oil (HAO) and to higher molecular weight (?280) aromatic and asphaltene fractions of supercritical gas (SCG) extracts and a hydrogenation residue (pitch). Aliphatic H/C ratios for these occur in the range 1.9-2.3, the SCG extract fractions having the highest values because they contain significantly more CH₃ and less CH than the HAO and pitch fractions.     

Quantitative aspects of solid state 13C n.m.r. of coals and related materials

The quantitative aspects of cross-polarization (CP), which is used in conjunction with dipolar decoupling and magic-angle rotation to obtain high resolution ¹³C n.m.r. spectra of coals, have been studied using a bituminous coal (82 wt% C, dmmf basis) and asphaltenes from an extract of the same coal. The condition for obtaining reliable quantitative data, that rotating frame ¹H relaxation times (T_1p′ these govern the extent of CP) are much longer than the time required to polarize the carbons present (≈1 ms), was met for the asphaltenes. In contrast, about half the protons in the coal have T_1p5 of ≈ ? 1 ms, these times being too short to allow CP of all the carbons. Although the aromaticities obtained for this coal were fairly constant (≈0.75) using (CP) contact times > 0.5 ms, the total peak intensity decreased markedly as the contact time was increased and was much less than that for the asphaltenes. These results indicate that not all the carbons in bituminous coals are observed by CP and, as a consequence, aromaticities reported in the literature for some bituminous coals appear to be low.     

Two-dimensional n.m.r. characterization of cycloaliphatic epoxy resins

The cycloaliphatic epoxy resins were studied by various two-dimensional nuclear magnetic resonance (2D n.m.r.) spectroscopies. The ¹³C n.m.r. spectra of the epoxy resins were assigned by using DEPT and 2D INADEQUATE techniques and the ¹H n.m.r. spectra were assigned by using 2D ¹H---¹H and ¹H---¹³C COSY techniques. Complete characterization of the samples synthesized by the oxidation of cyclohexene derivatives not only revealed the existence of the stereochemical isomers resulting from the structural difference of the oxide rings in the samples but also provided the composition ratio of the isomers.     

Evaluation of a delayed coking process by H and C n.m.r. spectroscopy: 2. Detailed interpretation of liquid n.m.r. spectra

The ¹H and ¹³C nuclear magnetic resonance (n.m.r.) spectra of a delayed coking feedstock and products, presented in a previous paper, are analysed here in detail by matching results from inspection of both nuclei. The conventional spectra of whole samples are used in combination with elemental analysis data, and substantial agreement is obtained. Differences are explored to yield valuable information. Interpretation of some band assignments is modified to account for new results. This approach results in a detailed quantitative estimation of a few key structures that contain the main functional groups that characterize these petroleum fractions.     

C cross-polarization n.m.r. examination of the Glen Davis oil shale deposit

The use of solid-state ¹³C cross-polarization n.m.r. for rapid analysis of bore cores is demonstrated by examination of subsections of a Glen Davis oil shale bore. The determined aromaticities, f_a, differ widely between subsections indicating large variability in potential oil yields. The variation does not correlate with depth of subsection but is shown to correlate well with maceral composition. The correlation found previously by Zilm and co-workers (Fuel 1981, 60, 717) between f_a, determined by solid-state ¹³C n.m.r., and wt% fixed carbon for a range of macerals is found to be supported by the data for Glen Davis subsections which are mixtures of all three maceral types.     

High resolution solid state C n.m.r. of Canadian peats

Peat samples from three locations in Quebec, Canada, were characterized by ¹³C CP/MAS n.m.r. spectroscopy. The n.m.r. analysis indicates that the peats contain a significant amount of unaltered plant components including cellulose, hemicellulose, lignin, waxes and resins. Integration of specific regions of the spectra can give semi-quantitative estimates of some of these plant components and, in limited cases, information about the degree of decomposition can be obtained from the ¹³C CP/MAS n.m.r. spectrum. Dipolar dephasing experiments and difference spectroscopy were found to be valuable techniques for spectra assignments and enhancement of compositional differences.     

High resolution solid state 13C n.m.r. of butadiene grafted polypropylene

¹H dipolar decoupled ¹³C n.m.r. experiments with the aid of the magic angle spinning technique have been used to determine the graft content and the isomer content of the polybutadiene grafts in a graft copolymer with isotactic polypropylene.     

Quantitative estimation of CHn group abundances in fossil fuel materials using 13C n.m.r. methods

Comments on the use and relative merits of gated spin echo (GASPE) and spin echo broad band off-resonance decoupling (SEBBORD) selected multiplet ¹³C n.m.r. methods, for the identification and quantitation of CH_n (n = Q?3) groups in fossil fuel materials, are given in response to recently published reports.     

Structural analysis of Aleksinac oil shale kerogen by high-resolution solid-state C n.m.r. spectroscopy

A sample of kerogen from Aleksinac oil shale was examined by high-resolution solid-state ¹³C n.m.r. spectroscopy. The presence and relative proportions of kerogen structural units were estimated using a combination of NQS and T_1C methods with a peak-synthesis technique applied to the ¹³C CP—MAS spectrum. Relaxation parameters from these experiments were used to estimate differences in relative ‘mobility’ of various structural units. The kerogen was found to be highly aliphatic and to contain 79% long-chain aliphatic plus alicyclic structures, as well as 9% aromatic structures. These findings are in good agreement with the characterization of the same kerogen from its oxidation products.     

Oil-shale analysis by CP/MAS-13C n.m.r. spectroscopy

Solid-state ¹³C n.m.r. (CP/MAS-¹³C n.m.r.) spectroscopy provides a direct method for estimating potential oil yields of oil shale formations. Relative aliphatic resonance areas correlate linearly with oil yield and provide a method for oil yield estimation that obviates the need to determine weight per cent organic carbon for each specimen. This direct measurement is performed using an internal area standard, the carbonyl resonance of N-(2-¹³C-propanonyl)-N,N,N-trimethylammonium chloride, to monitor spectrometer sensitivity. Oil shale samples obtained as a function of depth at a site in the Mahogany Zone of the Green River Formation show a near-constant aliphatic carbon fraction, f_al ≡ (1?f_a), and a twofold, nonlinear variation in oil yield over the vertical dimension of the sampling. Aliphatic carbon resonance band shape changes among these samples are interpreted qualitatively as reflecting a two component mixture composed of the condensed alicyclic structures which link together to form the kerogen matrix and an n.m.r.-distinct but not necessarily chemically distinct contribution from normal-long chain hydrocarbon residues.     

Structural characterization of Saudi Arabian heavy crude oil by n.m.r. spectroscopy

Saudi Arabian heavy crude oil was separated into six fractions, including five distillate fractions (<93, 93–204, 204–260, 260–343 and 343–454 °C) and a >454 °C distillation residue. Each fraction was analysed by ¹H and ¹³C n.m.r. spectroscopy, and combined gained information from these analyses provided reliable average structural parameters. These included estimation of aliphatic and aromatic content, average paraffinic chain length, and estimation of hydrogen, methyl and alkyl bearing aromatic carbons for each of the six fractions. The extent of branching in paraffinic chains and amount of aromatic bridgehead carbons were also calculated.     

Quantitative solid-state C n.m.r. measurements on cokes, chars and coal tar pitch fractions

Bloch decay or single pulse excitation (SPE) ¹³C n.m.r., generally recognized as the best approach to obtain quantitatively reliable aromaticity values and other skeletal parameters for coals, was applied to partly carbonized coal samples, a biomass char and the toluene-insolubles from a coal tar and a corresponding pitch. As found previously for coals, the aromaticities and non-protonated carbon concentrations were generally higher than those estimated by cross-polarization (CP). Furthermore, in terms of accumulation times, the shorter ¹³C T₁'s of low-temperature chars makes SPE a more efficient technique than for coals. The higher concentrations of paramagnetic centres responsible for the shorter ¹³C T₁'s still result in observability of 75% of the carbon in the chars by the SPE technique. The ratios derived from the SPE measurements agree well with those obtained from elemental analysis.     

Optimum conditions for high resolution C n.m.r. of coal- and oil-derived products

Factors affecting the spin-lattice relaxation times T₁ of ¹³C resonances at 62.9 MHz were investigated for simple mixtures of tetralin, ethylbenzene, pentane and phenol and the prominent resonances of an anthracene oil and a coal-derived hydrogenation oil. Parameters varied were solvent temperature and nature—Cr(acac)₃, Cr(dpm)₃, Cr(hfac)₃, Fe(acac)₃, Fe(dpm)₃—and concentration of a paramagnetic relaxation agent (PARR). Effects of PARRs on relaxation rates are strongly dependent on neighbouring acidic or basic centres, but are much more uniform for Cr(hfac)₃ than for Cr(acac)₃. The presence of basic or acidic compounds does not significantly affect the relaxation of ¹³C of the neutral components. Optimum experimental conditions are characterized by nearly uniform T₁ values of all resonances to be detected. While 2D spectra allow disentanglement of overlapping lines, choosing optimum conditions for the neutral constituents may lead to a loss of signals from the acidic or basic compounds.     

Evaluation of a delayed coking process by H and C n.m.r. spectroscopy: 1. Material balances

The use of ¹H and ¹³C nuclear magnetic resonance (n.m.r.) spectroscopy to evaluate the performance of a delayed coking process is presented in a series of papers, of which this is the first. A meaningful analysis requires an accurate balance, which in turn requires analysis of the various types of atoms in the feed and in all products, including solid coke, as well as the amounts of each. Product yields were determined in a delayed coking pilot plant. Complete n.m.r. (¹H and ¹³C) characterization of feed and all delayed coking products, using a consistent classification, was combined with pilot plant data to obtain the total distribution of carbon and proton atoms in the delayed coking process. Changes in carbon and hydrogen distributions (products versus feedstock) reveal the nature of the thermal cracking reactions involved; the main change is a substantial increase in the number of aromatic and paraffinic carbons at the expense of naphthenic carbons.     

Evaluation of the aromatic structure of coal tar pitch by solid and solution state n.m.r.

Rapid magic angle spinning has been used to obtain sideband-free high field ¹³C n.m.r. spectra of coal tar pitches in the solid state. However, the unfavourable cross-polarization and ¹H relaxation characteristics make it difficult to accurately estimate concentrations of quaternary aromatic carbon using the dipolar dephasing method. The concentrations of bridgehead aromatic carbon in the whole pitch and toluene-insoluble fraction investigated were deduced using a combination of solid and solution state n.m.r. and elemental analyses.     

Wide-line H n.m.r. study of perdeuterated pyridine imbibed in a premium coal

The motion of perdeuterated pyridine imbibed in Argonne premium high-volatile coal (no. 601) has been studied by wide-line ²H n.m.r. spectroscopy. The coal sample had been saturated with perdeuterated pyridine for several days, then evacuated until the pyridine reached a concentration of 3.5%. The entrapped pyridine molecules undergo two tyes of rotation about the twofold symmetry axis: rapid diffusional rotation with a correlation time of 1 × 10⁻⁷ s; and 180 ° jumps with a residence time of 6 × 10⁻⁶ s. It is estimated that roughly half of the pyridine molecules execute each kind of motion. There is no evidence for a pyridine fraction that executes rapid isotropic rotation. The anisotropic nature of the rotation indicates that the interaction between pyridine and the coal structure is strong enough to prevent isotropic rotation.     

1H n.m.r. relaxation in bituminous coal and semicoke

Temperature and frequency-dependent proton relaxation measurements, in conjunction with spin concentrations determined by e.s.r., have shown that for fresh and oxidized coal the relaxation mechanism involves spin-diffusion to paramagnetic centres and to rotating methyl groups on alkyl chains. ¹H relaxation in semicokes is more complex; probably both direct relaxation to paramagnetic centres as well as spin-diffusion contribute.     

Molecular motion of polycarbonate in the vicinity of −60°C as revealed by broad-line n.m.r., magic angle spinning n.m.r. and conformational analysis

On the basis of correlation of data obtained by broad-line n.m.r. and magic angle spinning n.m.r. analysis as well as conformational analysis, conclusions have been drawn concerning the nature of molecular motion occurring in a polycarbonate chain in the vicinity of ?60°C. It is postulated that this motion is connected with conformational reorientation of bisphenol in unordered chains with a random conformation.     

Hydrocarbon structural group analysis of Athabasca asphaltene and its g.p.c. fractions by C n.m.r.

Asphaltene from the Athabasca oil sand bitumen separated according to molecular weight by gel permeation chromatography was examined by high resolution solution-state ¹³C and ¹H and solid state ¹³C n.m.r. Integration of the inverse gated decoupled solution state and CP/MAS ¹³C n.m.r. spectra gave the aromaticity of each fraction as well as the relative number of carbon atoms responsible for well resolved signals in the aliphatic portion of the spectra. A two-pulse spin-echo ¹³C n.m.r. sequence in the solution state, and dipolar dephasing in the solid state, permitted the assignment of each aliphatic carbon signal to a methyl, methylene, or methine carbon; no quaternary aliphatic carbons were observed. These signals show that the aromatic core of the asphaltene is surrounded by alkyl chains with a mean length of 7.7 for the lowest molecular weight fraction (MW 1200), increasing to 12 for the highest MW fraction (MW 16900). Aromaticity of the fractions obtained from solution spectra ranged from 34 to 48%, the highest aromaticity being associated with the lowest molecular weight asphaltenes. In the solid state, the aromaticity ranged from 31 to 42 %. The degree of branching ranged from 0.5 per chain for the low MW asphaltene to 1.0 for the high MW fraction. The highest naphthenic carbon content was found in the high MW fractions; the 1200 MW fraction appeared to be nearly devoid of such carbon, this fraction having a much higher aromaticity than the second-lowest MW fraction.