Separability of SO2 from SO2/N2 mixture through sulfoxide-modified poly(vinyl alcohol) and cellulose membranes

Separability of SO₂ from mixtures of SO₂ and N₂ gases was studied for membranes of poly(vinyl alcohol) (PVA) and cellulose modified with methyl, ethyl, t-butyl, and phenyl vinyl sulfoxides. Of these sulfoxide-modified polymers, the phenyl vinyl sulfoxide-modified PVA membranes were found to give the best separation of SO₂. In the phenyl vinyl sulfoxide modified PVA membranes, the permeability coefficient of SO₂ increased with sulfoxide content while separability of SO₂ was maximum at a sulfoxide content of 23.5 mol %; the separation factor of SO₂ was about 170 at this sulfoxide content. © 1993 John Wiley & Sons, Inc.     

On the association between poly(vinyl alcohol) and sodium dodecyl sulfate and its effect on liquid–liquid interfacial tension: A mathematical model

Association between poly(vinyl alcohol-co-vinyl acetate) copolymer (PVA) and sodium dodecyl sulfate (SDS) was studied experimentally and theoretically. It was found that, for the ethyl acetate-aqueous phase interface in which PVA was previously adsorbed, the interfacial tension (γ) increases abruptly to a maximum and then exhibits a relatively mild decay with the addition of SDS to the aqueous phase. The theoretical results indicate that vinyl acetate (VAc) segments determine γ. However, for relatively low concentrations of SDS (C_SDS), this latter plays a major role because through its association with the VAc segments it modulates the extent to which PVA is adsorbed at the interface, indirectly determining the value of γ. As C_SDS approaches to the CMC value for SDS, its influence on γ decreases because SDS tends to self-assembly rather than associates with VAc. These model predictions are consistent with experimental findings reported in the literature.     

Rheological properties of high molecular weight (HMW) syndiotactic poly(vinyl alcohol) (PVA)/HMW atactic PVA blend solutions

To identify the effect of blend ratios of syndiotacticity‐rich poly(vinyl alcohol) (s‐PVA)/atactic PVA (a‐PVA) having similar number‐average degrees of polymerization (P_n)s of 4000 and degrees of saponification (DS)s of 99.9% on the rheological properties of s‐PVA/a‐PVA/water solutions, water‐soluble s‐PVA and a‐PVA with different syndiotactic diad contents of 58.5 and 54.0%, respectively, were prepared by bulk copolymerization of vinyl pivalate and vinyl acetate (VAc) and solution polymerization of VAc, followed by saponifying the corresponding copoly(vinyl pivalate/vinyl acetate) and poly(vinyl acetate). The blend ratios played a significant role in rheological behavior. Over the frequency range of 10^?1–10² rad/s, s‐PVA/a‐PVA blend solutions with larger s‐PVA content show more shear thinning at similar (P_n)s and (DS)s of polymer, suggesting that PVA molecules are more readily oriented as s‐PVA content increases. Yield stress is higher for s‐PVA/a‐PVA blend solutions with larger s‐PVA content at similar (P_n)s and (DS)s of polymer. This indicates that more domains with internal order are produced at larger s‐PVA content in s‐PVA/a‐PVA blend solutions. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3934–3939, 2006     

Synthesis of poly(vinyl propionate) from poly(vinyl alcohol) in nonaqueous medium using ethyl nitrate dimethyl sulfoxide as a catalyst

Poly(vinyl alcohol) (PVA) can be dissolved in a nonaqueous medium in the presence of catalytic concentration of ethyl nitrate dimethyl sulfoxide, C₂H₅ONO₂·DMSO. From the PVA solution, poly(vinyl propionate), PVPR was prepared by the homogeneous esterification of PVA with propionic acid. The ester thus formed contained some unconverted hydroxyl group. The formation of the ester was confirmed by the IR and ¹H‐NMR spectra. The molecular weight of the ester was determined by GPC and intrinsic viscosity (η) was determined by viscometric method. Glass transition temperature, T_g, was obtained from differential scanning calorimetric (DSC) analysis. Thermal stabilities of the ester were checked by thermogravimetric analysis (TGA) and differential thermogravimetric (DTG) analysis. The efficiency of the ester as a flow improver of crude oil was also examined. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5675–5679, 2006     

Preparation of poly(vinyl butyral) with high acetalization rate

Poly(vinyl alcohol) (PVA) can be dissolved in a nonaqueous medium in the presence of catalytic concentration of ethyl nitrate dimethyl sulfoxide, C₂H₅ONO₂ · DMSO (EN · DMSO). From the PVA solution, poly(vinyl butyral) (PVBu) was prepared by acid‐catalyzed homogeneous acetalization of PVA with butyraldehyde. The formation of PVBu was confirmed by IR and ¹H‐NMR spectra. The degree of acetalization of PVBu was found to be 95 mol %, which was verified by ¹H‐NMR data and acetylation method. The molecular mass of the polymer was determined by GPC method. The glass transition temperature, T_g, was measured from differential scanning calorimetric (DSC) thermograms. Thermal stabilities were checked by thermogravimetric analysis (TGA) and differential thermogravimetry (DTG). The acetal decomposed in three stages. The corresponding initial decomposition temperatures were found to be 285, 390, and above 500°C. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 1182–1186, 2001     

Study on the redox adsorptive properties of fiber containing iso‐thiourea group toward Au(III)

Functional fiber containing iso‐thiourea group was prepared by reactive chloromethylated poly(vinyl acetate)‐graft‐polystyrene–divinylbenzene (PVA‐g‐PS–DVB) being reacted with thiourea. The functional group content of the fiber was 2.90 mmol/g. The chloromethylated PVA‐g‐PS–DVB reacted with sulfur atoms in the thiourea molecules; this made the fiber containing iso‐thiourea group. The results of static adsorption experiments showed that the adsorption amount of the fiber toward Au(III) reached a maximum amount, 1000 mg/g, at pH 1.5. It reduced the adsorbed Au(III) into Au(0), and the maximum reduction percentage was 90% at pH 2.0. The amount of Au(III) adsorbed by the fiber increased with increasing solution temperature but decreased with the increasing ionic strength of the solution. It was proven by electron spectroscopy for chemical analysis that some of the sulfur atoms in the fiber were oxidized into sulfone groups or sulfate ions. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 1985–1990, 2001     

Cationic Graft Polymerization of 2-Oxazolines on Poly(vinyl alcohol) Derivatives

The graft polymerization of various monomers onto PVA has been studied by radical polymerization mechanism. Successful grafting of acrylonitrile (AN), acrylamide (AAm), acrylic acid, methyl methacrylate, and vinyl acetate was reported by using chemical (Minoet al., 1959; Ide, 1961; Maskimov et al., 1965) and radiation (Misra et al., 1987) methods. On the other hand, less attention has been paid to ionic graft polymerization. Sasson and Zilkha reported on grafting formaldehyde onto potassium-metallated PVA (Sasson and Zilkha, 1969). Galin studied grafting of AN and propane sulfone onto sodium-metallated PVA (Galin, 1971). We used the same anionic system for the polymerization of AAm (Ikeda and Suzuki, 1980).     

Release of salicylic acid through poly(vinyl alcohol)/poly(vinyl pyrrolidone) and poly(vinyl alcohol‐g‐N‐vinyl‐2‐pyrrolidone) membranes

A controlled release profile of salicylic acid (SA) for transdermal administration has been developed. Poly (vinyl alcohol) (PVA) and Poly(vinyl alcohol)/Poly(vinyl pyrrolidone) (PVP) blended preparations were used to prepare the membranes by solvent‐casting technique. The release of the drug from the membranes was evaluated at in vitro conditions. The effects of PVA/PVP (v/v) ratio, pH, SA concentration and temperature were investigated. 60/40 (v/v) PVA/PVP ratio was found to be the best ratio for the SA release. Increase in pH and temperature was observed to increase the transport of SA. Instead of blending PVA with PVP, N‐Vinyl‐2‐pyrrolidone (VP) was grafted onto the PVA and the delivery performance for SA was compared with that of the blended PVA/PVP membranes. Grafted membranes gave higher transport percentages than the blended membranes. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:1244–1253, 2006     

Graft copolymerization of methyl acrylate onto poly(vinyl alcohol) initiated by potassium diperiodatonickelate(IV)

The graft copolymerization of methyl acrylate onto poly(vinyl alcohol) (PVA) with a potassium diperiodatonickelate(IV) [Ni(IV)]–PVA redox system as an initiator was investigated in an alkaline medium. The grafting parameters were determined as functions of the temperature and the concentrations of the monomer and initiator. The structures of the graft copolymers were confirmed by Fourier transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction, differential scanning calorimetry, and thermogravimetric analysis. The Ni(IV)–PVA system was found to be an efficient redox initiator for this graft copolymerization. A single‐electron‐transfer mechanism was proposed for the formation of radicals and the initiation. Other acrylate monomers, such as methyl methacrylate, ethyl acrylate, n‐butyl acrylate, and n‐butyl methacrylate, were used as reductants for graft copolymerization. These reactions definitely occurred to some degree. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 529–534, 2003     

Comparative behavior of PVA/PAN and PVA/PES composite pervaporation membranes in the pervaporative dehydration of caprolactam

Flat‐sheet composite membranes were developed by the traditional phase inversion technique using poly;(vinyl alcohol) (PVA). PVA composite pervaporation (PV) membranes were prepared with crosslinked PVA selective layer and porous polyacrylonitrile (PAN) and polyether sulfone (PES) substrate layer material as supports for separating heat sensitivity substance ε‐caprolactam (CPL) from CPL/water mixtures. Glutaraldehyde was used as crosslinking agent. The effect of the composition of glutaraldehyde on membrane stability and structure were investigated. The operating parameters, such as feed concentration and operating temperature, remarkably affected PV performance of the composite membranes. The composite membranes with PVA casted on PAN (PVA/PAN) showed superior PV performance than that casted on PES (PVA/PES). This study has also shown that the type of porous support plays an important role in the PV performance. As a result, this work has presented the information needed of the behavior of PV membranes for dehydration applications of industrial caprolactam. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 4005–4011, 2007     

Role of molecular weight of atactic poly(vinyl alcohol) (PVA) in the structure and properties of PVA nanofabric prepared by electrospinning

Atactic poly(vinyl alcohols) (a‐PVAs) having number‐average degrees of polymerization [(P_n)s] of 1700 and 4000 were prepared by the solution polymerization of vinyl acetate, which was followed by the saponification of poly(vinyl acetate) to investigate the effects of molecular weights of a‐PVA on the characteristics of electrospun a‐PVA nanofabrics. A‐PVA nanofabrics were prepared by electrospinning with controlling the process parameters including the electrical field, conductivity, tip‐to‐collector distance, and solution concentration. Through a series of characterization experiments, we identified that the molecular weight of a‐PVA had a marked influence on the structure and properties of nanofabrics produced. That is, the higher the molecular weight of PVA, the superior the physical properties of PVA nanofabric. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1638–1646, 2004     

Preparation and characterizaton of poly(dimethyl amino ethyl methacrylate) modified poly(vinyl alcohol) membrane by UV radiation for the permeation of 5‐fluorouracil

Poly(vinyl alcohol) was modified by UV radiation with dimethyl amino ethyl methacrylate (DMAEMA) monomer to get poly(dimethyl amino ethyl methacrylate) modified poly(vinyl alcohol) (PVADMAEMA) membrane. The PVADMAEMA membranes were characterized by Fourier transform infrared spectroscopy. The tensile strength and elongation of PVADMAEMA membranes were measured by Universal Testing Machine. The results of X‐ray diffraction (XRD) and differential scanning calorimetry (DSC) showed that (1) the crystalline area in PVADMAEMA decreased with increasing the content of poly(dimethyl amino ethyl methacrylate) in the membrane. (2) Only one glass transition temperature (T_g) was found for the various PVADMAEMA membranes. It means that poly(dimethyl amino ethyl methacrylate) and PVA are compatible in PVADMAEMA membrane. (3)The T_g of the membrane is reduced with increasing the content of poly(dimethyl amino ethyl methacrylate) in the membrane. The water content on the PVADMAEMA membranes was determined. It was found that the water content on the PVADMAEMA membrane increased with increasing the content of poly(dimethyl amino ethyl methacrylate). The changes of properties enhanced the permeability of 5‐Fluorouracil (5‐Fu) through the PVADMAEMA membranes. A linear relationship between the permeability and the weight percent of poly(dimethyl amino ethyl methacrylate) in the PVADMAEMA membrane is found. It is expressed as P (cm/s) = (9.6 ± 0.4) × 10^?5 + (8.8 ± 0.6) × 10^?5 W _x , where P is the permeability of 5‐Fu through the membrane and W_x is the weight percent of poly(dimethyl amino ethyl methacrylate) in the PVADMAEMA membrane. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Effect of degree of saponification on the rheological properties of syndiotactic poly(vinyl alcohol)/ water solution

To identify the effect of degree of saponification (DS) of syndiotactic poly(vinyl alcohol)s (s‐PVA)s having similar tacticity and molecular weight on the rheological properties of s‐PVA/water solution, four kinds of (s‐PVA)s with assigned (DS)s, from 93.1 to 97.5%, were prepared by copolymerization of vinyl pivalate (VPi) and vinyl acetate (VAc), followed by saponifying the corresponding copoly(VPi/VAc). The DS played a significant role in rheological behavior. Over the frequency range of 10^?1 to 10² rad/s s‐PVA with higher DS shows more shear thinning at similar molecular weight and tacticity of polymer, suggesting that PVA molecules are more readily oriented as DS increases. This may provide indirect evidence of the spontaneous in situ orientation of s‐PVA molecules at the late stage of saponification. Yield stress is higher for s‐PVA with higher DS at similar molecular weight and tacticity of s‐PVA. This indicates that more domains with internal order are produced at higher saponification. These facts result from increase in stiffness of s‐PVA molecules with proceeding the saponification reaction. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 463–467, 2002     

CMC and dynamic properties of poly(VA-<Emphasis Type="Italic">b</Emphasis>-St) copolymer micelles for drug delivery

The polymeric micelles from amphiphilic block copolymer poly(vinyl alcohol-b-styrene) (poly(VA-b-St)) with different syndiotacticity of poly(vinyl alcohol) (PVA) block were prepared by dialysis against water. Critical micelle concentration (CMC) and dynamic properties of poly(VA-b-St) copolymeric micelles were investigated by fluorescence techniques. From the fluorescence emission spectrum measurements using pyrene as a fluorescence probe, the observed CMC value was in the range of 0.125–4.47 mg/L. The CMC value increased with decreasing the weight ratio of PS to PVA block and with increasing the syndiotacticity of PVA block. The rate of pyrene release was very slow for block copolymers containing PVA block with higher syndiotacticity, which indicates that their micelles have increased kinetic stability. This work was presented at 13 ^th YABEC symposium held at Seoul, Korea, October 20–22, 2007.     

Nano boron nitride laminated poly(ethyl methacrylate)/poly(vinyl alcohol) composite films imprinted with silver nanoparticles as gas barrier and bacteria resistant packaging materials

Herein, nano boron nitride (BN) laminated poly(ethyl methacrylate) (PEMA)/poly(vinyl alcohol) (PVA) nanocomposite films are fabricated by using a simple in situ polymerization technique with incorporation of silver nanoparticles (Ag NPs). Structural investigations of PEMA/PVA/Ag@BN nanocomposite thin films are carried out by Fourier-transform infrared spectroscopy, dynamic light scattering, X-ray diffraction analysis, ¹H nuclear magnetic resonance, ¹³C nuclear magnetic resonance, and mass spectrometry. The change in morphology of PEMA/PVA matrix due to the reinforcement of BN platelets are identified by electron microscopic studies. The unique tortuous paths are achieved by the dispersion of BN platelets by which gas penetration is restricted with enhancing the barrier properties of the material by 6.5 folds at 5 wt% BN content as compared with neat PEMA/PVA. Acid and alkali resistant along with biodegradability behavior of as-synthesized nanocomposites are studied. From limiting oxygen index (LOI) results, it is found that the prepared materials are fire retardant in nature owing to effective reinforcement of BN layers. Antibacterial activities of PEMA/PVA/Ag@BN nanocomposite are studied by Xanthomonas citri or axonopodis pv. Citri, Escherichia coli, and Xanthomonas oryzae pv. Oryzae because of Ag NPs reinforcement. The substantial improvements in gas barrier, fire retardant, and antibacterial properties enable the materials for packaging application.     

Effect of stereoregularity and molecular weight on the mechanical properties of poly(vinyl alcohol) hydrogel

The effect of the stereoregularity and molecular weight of poly(vinyl alcohol) (PVA) on the mechanical properties of hydrogel was investigated. Compressive strength, creep behavior, and dynamic viscoelasticity were measured on hydrogels of syndiotacticity‐rich PVA derived from poly(vinyl pivalate) (D_p = 1690 diad‐syndiotacticity = 61%, D_p = 8020 diad‐syndiotacticity = 62%) and atactic PVA (D_p = 1750 diad‐syndiotacticity = 54%, D_p = 7780 diad‐syndiotacticity = 54%). Increasing the molecular weight of molecular chains constituting the gel improved the compressive strength of atactic PVA hydrogel. The stereoregularity of PVA had a greater effect than molecular weight on the strength of the hydrogel. Gel prepared from 8.8 g/dL syndiotacticity‐rich PVA had a high compressive modulus of 10 kPa, and the compressive modulus of the gel prepared from 3.3 g/dL was comparable with that of atactic PVA hydrogel prepared with more than 6 g/dL. The dynamic storage modulus of the gel derived from syndiotacticity‐rich PVA was remarkably higher than that of the atactic PVA gel and remained constant up to 60°C. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Polyurethane/poly(ethylene‐co‐ethyl acrylate) and functional carbon black‐based hybrids: Physical properties and shape memory behavior

A polyurethane (PU) was developed from poly(dimethylamine‐co‐epichlorohydrin‐co‐ethylenediamine) (PDMAE) and polyethylene glycol (PEG) as soft segment and 2,4‐toluene diisocyanate (TDI) incorporating as hard segment. Later PU was blended with poly(ethylene‐co‐ethyl acrylate) (PEEA). Poly(vinyl alcohol)‐functionalized carbon black (CB‐PVA) nanoparticles was used as filler. The structure, morphology, mechanical, crystallization, and shape memory behavior (heat and voltage) were investigated methodically. Due to physical interaction of the blend components, unique self‐assembled network morphology was observed. The interpenetrating network was responsible for 83% rise in tensile modulus and 46% increase in Young's modulus of PU/PEEA/CB‐PVA 1 hybrid compared with neat PU/PEEA bend. Electrical conductivity was increased to 0.2 Scm^?1 with 1 wt % CB‐PVA nanofiller. The original shape of sample was almost 94% recovered using heat induced shape memory effect while 97% recovery was observed in an electric field of 40 V. Electroactive shape memory results were found better than heat stimulation effect. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43481.     

Synthesis of poly(vinyl alcohol) core-polystyrene shell-type flower microgels

Four types of poly(vinyl alcohol-b-styrene-b-vinyl alcohol) (P(VA-b-S-b-VA)) triblock copolymers were synthesized by hydrolysis of poly(vinyl acetate-b-styrene-b-vinyl acetate) triblock copolymers prepared by radical living polymerization. The polyvinyl alcohol (PVA) core-polystyrene corona-type flower micelles were formed with ASA-4 in benzene at 25°C. The PVA core part of the micelle was crosslinked with hexamethylene diisocyanate in solution. The monodispersed spherical products (microspheres) were synthesized by crosslinking. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 63: 849–854, 1997     

Preparation and characterization of membranes obtained from blends of acrylonitrile copolymers with poly(vinyl alcohol)

New microfiltration and ultrafiltration membranes were obtained using acrylonitrile‐vinyl acetate copolymers in mixture with poly(vinyl alcohol) (PVA). Thus, a blend polymer solution was prepared in dimethylsulfoxide (DMSO) and used to obtain bicomponent polymer membranes by phase inversion. The rheological behavior of the DMSO polymer solutions was, mostly, dilatant at low shear gradients and pseudo plastic with quasi Newtonian tendency at higher gradients. Membranes were characterized by Fourier transform infrared spectrometry (FTIR), optical microscopy, atomic force microscopy, thermal gravimetric analysis‐differential thermal gravimetry, and pure water flux (PWF). FTIR spectra displayed the characteristic bands for acrylonitrile, vinyl acetate, and PVA. The morphology and the porosity can be tailored by the preparation conditions. PVA allows controlling the size of the pores and enables, in principle, to use the resulted membranes as supports for enzyme immobilization. PVA content influences the thermal stability. PWF values depend on the copolymer, on the content in PVA, but also on the coagulation bath composition. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41013.     

Functional modification of poly(vinyl alcohol) by copolymerizing with a hydrophobic cationic double alkyl‐substituted monomer

In this paper, a hydrophobic monomer (HM) that has a cationic double alkyl‐substituted group bonded to the nitrogen atom was first synthesized. Then a hydrophobic poly(vinyl alcohol) (PVA) was prepared by a radical solution copolymerization of vinyl acetate (VAc) with the HM followed by an alcoholysis reaction in alkaline conditions. The structures of HM and hydrophobically modified PVA (H‐PVA) were confirmed by Fourier transform infrared spectroscopy and nuclear magnetic resonance. The effect of hydrophobic cationic segments on crystallization behaviors, mechanical properties, morphology, solution viscosity, and hydrophobic property were investigated. The results indicated that the crystallinity decreased from 37.2% of pure PVA to the minimum 23.2% of H‐PVA with the incorporation of 1.15 mol % HM. The thermal decomposition temperature of H‐PVA increased by about 50 °C compared with that of pure PVA. The viscosity of the H‐PVA solution was several times higher than that of the corresponding unmodified PVA solution over the whole shear rate range, which demonstrated that the H‐PVA had good shear‐resistance ability. Furthermore, the contact angle was significantly increased from 55.1° to 115° with the incorporation of only 0.83% HM, which illustrated that the H‐PVA had high hydrophobicity. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43888.