Grafting of poly(acrylonitrile) onto guar gum using potassium persulfate/ascorbic acid redox initiating system

The grafting of poly(acrylonitrile) onto guar gum in aqueous medium initiated by the potassium presulfate/ascorbic acid redox system has been studied gravimetrically at the temperature of 35 + 0.2°C in the presence of atmospheric oxygen. A plausible mechanism of graft copolymerization has been suggested on the basis of experimental results. The effect of grafting on the water and saline retention capacities has been studied and compared with the values obtained for ungrafted guar gum. © 1993 John Wiley & Sons, Inc.     

Cu+2/mandelic acid redox pair initiated graft copolymerization acrylamide onto guar gum

The effect of reaction conditions on the grafting parameters during the grafting of acrylamide (ACM) onto guar gum (GOH) by using a Cu⁺²–mandelic acid (MA) redox couple was studied. On increasing the Cu⁺² ion concentration (0.5 × 10⁻² to 1.0 × 10⁻² mol dm⁻³), an increase in total conversion of monomer, grafting ratio, efficiency, and add on was observed. Grafting ratios increased with an increase in concentration of mandelic acid and reaches its maximum value at 0.8 × 10⁻² mol dm⁻³. It was observed that grafting onto guar gum takes place efficiently when monomer and hydrogen ion concentrations are 20.0 × 10⁻² and 2.2 × 10⁻² mol dm⁻³, respectively. Optimum temperature and time for obtaining a maximum grafting ratio and efficiency was found to be 35 ± 0.2°C and 2 h, respectively. The plausible mechanism of grafting was suggested. The graft copolymer was characterized by infrared spectroscopy and thermogravimetric analysis. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 739–745, 1999     

Studies of graft copolymerization of acrylamide onto guar gum using peroxydiphosphate–metabisulphite redox pair

The effect of reaction conditions on the grafting parameter during grafting of acrylamide onto guar gum has been studied using peroxydiphosphate–metabisulphite redox pair at 35 °C. Grafting ratio, efficiency and add‐on all increase as the concentrations of peroxydiphosphate and acrylamide increase up to 40.0 × 10⁻³ mol dm⁻³ and 40.0 × 10⁻² mol dm⁻³, respectively. It has been observed that the optimum concentrations of metabisulphite and guar gum for obtaining high grafting ratio, efficiency, add‐on and conversion are 6.0 × 10⁻³mol dm⁻³ and 91.7 × 10⁻² g dm⁻³, respectively. © 2000 Society of Chemical Industry     

Grafting of polyacrylonitrile onto guar gum under microwave irradiation

Using microwave (MW) irradiation grafting of polyacrylonitrile (PAN) onto guar gum in water was done without using any radical initiator or catalyst within a very short reaction time. The extent of grafting could be adjusted by controlling the reaction conditions and maximum percentage grafting (%G) of about 188% was obtained under optimum conditions in 1.66 min. The average molecular weight of the grafted PAN chains and water‐retention power of the alkali hydrolyzed MW‐grafted gums were also determined and compared with those of the conventionally synthesized (cs) graft copolymer. A representative MW‐grafted copolymer, guar‐g‐polyacrylonitrile was characterized by IR, NMR, XRD, TGA, and elemental analysis. A plausible mechanism for the grafting under MW was proposed. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1569–1575, 2004     

Grafting of methyl methacrylate onto guar gum by hydrogen peroxide initiation

Graft copolymerization of methyl methacrylate (MMA) onto guar gum (GG) in aqueous slurry has been carried out using hydrogen peroxide (H₂O₂) as initiator. The copolymers were characterized by infrared spectroscopy. The grafting parameters like percent grafting, grafting efficiency, percent add-on, and the grafting frequency were determined, and the effect of reaction time, concentration of initiator, and [GG]/[MMA] ratios on the grafting parameters have been discussed. The decrease in % add-on at increasing concentration of H₂O₂ indicated enhancement in the rate of homopolymerization of methyl methacrylate.     

Graft copolymerization of acrylic acid onto guar gum

The graft copolymerization of acrylic acid (AA) onto guar gum (GOH) was carried out by a peroxydiphosphate (PDP)–silver(I) system. Grafting ratio, efficiency, add‐on, and conversion increase upon increasing the concentration of PDP and acrylic acid, whereas they decrease upon increasing the concentration of guar gum. Upon increasing the concentration of silver and hydrogen ions up to 2.0 × 10⁻³ and 4.87 × 10⁻² mol dm⁻³, respectively, the grafting ratio and efficiency increase but decrease upon further increasing the concentration. The increase in temperature from 30 to 45°C increases the grafting ratio but the conversion efficiency decreases. The optimum time period for graft copolymerization was found to be 2 h. The graft copolymers were characterized by infrared spectroscopy and thermogravimetric analysis. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 39–44, 2000     

Grafting vinyl monomers onto silk fibers. VIII. Graft copolymerization of methyl methacrylate onto silk using tetravalent manganese–oxalic acid redox system

The graft copolymerization of methyl methacrylate onto silk fibers was investigated in aqueous solution using the Mn(IV)–oxalic acid redox system. The copolymerization reaction was carried out under a variety of conditions such as different monomer, initiator, oxalic acid, acid concentrations, and temperatures. The graft yield increases with increasing initiator concentration up to 5 × 10^?2M, and with further increase of the initiator concentration it decreases. The graft yield also increases with increasing sulfuric acid concentration up to 15 × 10^?2M, and decreases thereafter. The rate of grafting also increases with increase in oxalic acid concentration up to 1.5 × 10^?2M and 84.592 × 10^?2M, respectively, and thereafter the rate of grafting shows down. The effect of temperature, solvents, and salts on graft yield has also been investigated and a plausible rate expression has been derived.     

Vanadium(V)/mandelic acid initiated graft copolymerization of acrylamide onto guar gum in an aqueous medium

The graft copolymerization reaction of acrylamide onto guar gum with a vanadium(V)/mandelic acid redox pair was carried out in an N₂ atmosphere. The optimum concentrations of vanadium(V), mandelic acid, hydrogen ions, acrylamide, and guar gum for the maximum percentage of grafting were 6.0 × 10^?3, 2.0 × 10^?2, 55.0 × 10^?2, and 20.0 × 10^?2 mol/dm³ and 110.1 × 10^?2 g/dm³, respectively. The optimum time and temperature of reaction were 90 min and 35°C, respectively, and during the study of [H⁺] variation, a prompt change in the value of the grafting parameters was observed. The maximum percentage of swelling of the graft copolymer was achieved at room temperature in 1 h. Studies of the flocculation, viscosity, and metal‐ion absorption capacity were also performed. The synthesized graft copolymer was characterized by Fourier transform infrared spectroscopy and thermogravimetric analyses, which showed that the grafted guar gum was thermally more stable than the ungrafted guar gum. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Modification of guar gum through grafting of 4‐vinyl pyridine using potassium peroxymonosulphate/ascorbic acid redox pair

In the present article, the graft copolymerization of 4‐vinyl pyridine onto guar gum initiated by potassium peroxymonosulphate/ascorbic acid redox pair in an aqueous medium was studied gravimetrically under a nitrogen atmosphere. Grafting ratio, grafting efficiency, and add on increased on increasing the concentration of potassium peroxymonosulphate from 5.0 × 10^?4 to 10 × 10^?4 mol/L and ascorbic acid concentration from 0.4 × 10^?3 to 2.0 × 10^?3 mol/L. On increasing the hydrogen ion concentration from 2.5 × 10^?3 to 10.0 × 10^?3 mol/L, grafting ratio, efficiency, add on and conversion were increased. Maximum grafting was obtained when guar gum and monomer concentration were 1.0 g/L and 20.0 × 10^?2 mol/L, respectively. An increase in temperature from 30 to 35°C increased the grafting ratio, but conversion and homopolymer decreased. The graft copolymers were characterized by IR spectroscopy and thermogravimetric analysis. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Graft polymerization of methyl methacrylate onto guar gum with ceric ammonium sulfate/dextrose redox pair

The effect of different reaction conditions on the grafting of methyl methacrylate (MMA) onto guar gum (GG) has been studied in detail. The grafting efficiency was optimal under the following conditions: MMA at 1.13 mol/L; ceric ammonium sulfate at 6.32 × 10^?3 mol/L; dextrose monohydrate at 2.428 × 10^?3 mol/L; GG at 4 g/L; temperature at 50°C; and time at 210 min. Fourier transform infrared spectroscopy was used for the confirmation of copolymer formation. Thermogravimetric analysis of GG and a representative graft copolymer were studied. A probable mechanism of grafting has been suggested. The biodegradability of the resulted copolymer was evaluated. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 3520–3525, 2001     

Graft copolymerization of methacrylic acid onto guar gum,using potassium persulfate as an initiator

Graft copolymerization of methacrylic acid (MAA) onto guar gum (GG) was carried out by free radical initiation mechanism by using potassium persulfate (PPS) as an initiator. It was found that % grafting, grafting efficiency, and % conversion were all dependent on the concentration of PPS, MAA, reaction temperature, and reaction time. Using PPS, the maximum % grafting was ascertained to be 241 at the optimum conditions of 60°C reaction temperature, 3 h of reaction time, 1.1 mmol of PPS, and 0.058 mol of MAA. Plausible mechanism for grafting reaction was suggested. The graft copolymer formed was characterized by Fourier transform infrared and differential scanning calorimetry. The graft copolymer formed could find applications in drug delivery. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 618–623, 2006     

Grafting vinyl monomers onto polyester fibers. III. Graft copolymerization of methyl methacrylate onto poly(ethylene terephthalate) using potassium permanganate–oxalic acid redox system

The use of the KMnO₄—oxalic acid redox system to initiate graft copolymerization of methyl methacrylate (MMA) onto poly(ethylene terephthalate) (PET) fiber has been investigated. The rate of grafting was determined by varying the concentrations of monomer, KMnO₄, oxalic acid, acidity of the medium, and temperature. The graft yield increases steadily with increasing KMnO₄ concentration. The graft yield is also influenced with concentration. The graft yield is also influenced with temperature. The effect of certain solvents on the rate of grafting has been investigated, and a suitable reaction mechanism has been proposed.     

Grafting of acrylic acid onto flax fibers using Mn(IV)‐citric acid redox system

When the flax fibers (machine tow) were treated with KMnO₄ solution, MnO₂ was deposited over‐all the fiber surface. The amount of MnO₂ deposited relied on the KMnO₄ concentration. Subjecting the flax‐containing MnO₂ to a solution consisting of monomer (acrylic acid, AA) and citric acid, CA (or any acid used in this work) resulted in formation of poly(AA)‐flax graft copolymer. Dependence of the polymer criteria, namely, the total percentage conversion (%TC) and the carboxyl content of the grafted flax fibers on various grafting parameters, viz., concentrations of the redox pair as well as AA, material‐to‐liquor ratio (M/R), duration and temperature of polymerization, kind of the acid and kind of the flax fibers pretreatment was studied systematically. The results indicated that the polymerizability of AA molecules, expressed as %TC (i.e., counting both grafting and homopolymerization) and thence the carboxyl content (i.e., evaluating the extent of AA grafting along the flax backbone) was optimized with the following conditions: [AA], 100% (based on weight of flax fibers, owf); [CA], 0.4 meq/1 g flax; [MnO₂], 0.4 meq/1 g flax; polymerization temperature, 40°C; polymerization time, 30 min; and the M/R, 1 : 50. A tentative mechanism for grafting of flax fibers with AA using MnO₂‐acid redox system was elucidated. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3028–3036, 2006     

Studies on graft copolymerization of 4‐vinylpyridine onto guar gum

Graft copolymerization of 4‐vinylpyridine (4‐VP) onto guar gum (GOH) using potassium monopersulfate (PMS)/thioacetamide (TAA) as a redox pair was studied in an aqueous medium under inert atmosphere. The concentration of potassium monopersulfate and thioacetamide should be 1.0 × 10^?2 and 5.0 × 10^?3 mol dm^?3, respectively, for highest grafting ratio and efficiency. Efficient grafting was observed at 19.25 × 10^?2 and 4.87 × 10^?2 mol dm^?3 concentration of 4‐vinylpyridine and sulfuric acid, respectively. The optimum temperature for grafting is 30°C. As the time period of reaction is increased, the grafting ratio increases, whereas efficiency decreases. The plausible mechanism of grafting has been suggested. A sample of guar gum and guar‐ g‐4‐vinylpyridine were subjected to thermogravimetric analysis with the objective of studying the effect of grafting 4‐vinylpyridine on the thermal stability of guar gum. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2380–2385, 2002     

Graft copolymerization of acrylic acid onto xanthum gum using a potassium monopersulfate/Fe2+ redox pair

A previously unreported graft copolymer of xanthan gum (XOH) with acrylic acid was synthesized and the reaction conditions were optimized using a potassium monopersulfate (PMS)/Fe²⁺ redox pair. Grafting ratio, add on, and conversion increase with an increase in the ferrous ion concentration (2.0 × 10^?3 to 5.0 × 10^?3 mol dm^?3) and PMS concentration (1.0 × 10^?3 to 4.0 × 10^?3 mol dm^?3). It was observed that grafting takes place efficiently when the acrylic acid concentration and temperature were 5.0 × 10^?2 mol dm^?3 and 35°C, respectively. Samples of xanthan gum and xanthan gum–g–acrylic acid were subjected to thermogravimetric analysis with the objective of studying the effect of grafting of acrylic acid on the thermal stability of xanthan gum. The graft copolymer was found to be more thermally stable than xanthan gum. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1341–1346, 2003     

Grafting of N-methylolacrylamide onto flax/polyester fabric using ferrous cellulose thiocarbonate/H2O2 redox system

Graft copolymerization of N-methylolacrylamide onto flax/polyester blend fabric using ferrous cellulose thiocarbonate/H₂O₂ redox system was investigated under different conditions including hydrogen peroxide concentration (1?60 mmol/l), ferrous ammonium sulphate concentration (1?50 mmol/l), N-methylolacrylamide concentration (5?200%, based on weight of sample), polymerization time (10?90 min), temperature (20?50°C), and pH of the medium (1.1?11). The nitrogen content and/or the methylol content were used for calculation of graft yields. Results obtained indicated that graft yields, derived from nitrogen analysis, are higher the greater the H₂O₂ concentration increases till 40 mmol/l, then level off. On the other hand, graft yields derived from methylol content exhibit maximum value at 10 mmol/l H₂O₂. The results indicate also that grafting was highly favoured when it was carried out using 1 mmol/l ferrous ammonium sulphate and pH 4.4 at 30°C for 60 min. The apparent activation energy of the copolymerization reaction amounts to 9.74 kJ/mol. Furthermore, the graft yield increases by increasing N-methylolacrylamide concentration within the range studied. The work was further extended to include a comparison between the polymerization efficiencies of the ferrous cellulose thiocarbonate/H₂O₂ redox system and the ferrous/H₂O₂ redox system in inducing grafting of N-methylolacrylamide onto flax/polyester blend fabric. For this reason, the two systems were studied with respect to graft yield, homopolymer proportion, total conversion, graft efficiency, and homopolymer efficiency.     

Grafting vinyl monomers onto silk fibers IV. Graft copolymerization of methyl methacrylate onto silk using bromate-thiourea redox system

The use of a bromate-thiourea redox system to initiate graft copolymerization of methyl methacrylate onto silk has been investigated. The rate of grafting has been determined by varying the concentration of bromate ion, monomer, thiourea, the temperature and the solvent. The graft yield increases with increasing the bromate ion concentration up to 20 mmo1/1. With further increase of oxidant the graft yield decreases. The percentage of grafting increases with increase of hydrochloric acid up to 40 mmo1/1. Thereafter it decreases. The effect of increasing thiourea concentration up to 15 mmo1/1. is to bring about an increase in the graft yield. Above this concentration grafting decreases sharply. The rate of grafting increases with increase of temperature. The use of various water soluble solvents effects the percentage of grafting considerably. The alkali solubility of the grafted fiber has been investigated.     

The polymerization of acrylamide initiated with CE(IV) and KMNO4 redox systems in the presence of glycine

Glycine-Ce(IV) salts and −KMnO₄ initiator systems were used for the polymerization of acrylamide, resulting in water-soluble polyacrylamide, which contains amino acid end groups. The dependence of polymerization yields and molecular weights of polymers on the mole ratio of acrylamide monomer to glycine, the polymerization time, the temperature, and the concentration of sulfuric acid were investigated. The decrease in the mole ratio of acrylamide to glycine resulted in a decrese in the molecular weight, and an increase in the yield of acrylamide polymer, which contains a glycine end group. With increasing acid concentration of the polymeric solution, the polymerization yield and the molecular weight of polymer decrease. Ce(IV) and Mn(IV) reduced to Ce(III) and Mn(II) in the polymerization reaction. The amounts of Ce(III) and Mn(II) bound to polymer were determined. The composition of the polymerization product was investigated and a bimodal character of the molecular weight distribution was observed. The mechanism of this phenomena is discussed. © 1996 John Wiley & Sons, Inc.