Reactivity ratios and copolymer properties of 2‐(diisopropylamino)ethyl methacrylate with methyl methacrylate and styrene

Free radical copolymerization kinetics of 2‐(diisopropylamino)ethyl methacrylate (DPA) with styrene (ST) or methyl methacrylate (MMA) was investigated and the corresponding copolymers obtained were characterized. Polymerization was performed using tert‐butylperoxy‐2‐ethylhexanoate (0.01 mol dm^?3) as initiator, isothermally (70 °C) to low conversions (<10 wt%) in a wide range of copolymer compositions (10 mol% steps). The reactivity ratios of the monomers were calculated using linear Kelen–Tüd?s (KT) and nonlinear Tidwell–Mortimer (TM) methods. The reactivity ratios for MMA/DPA were found to be r₁ = 0.99 and r₂ = 1.00 (KT), r₁ = 0.99 and r₂ = 1.03 (TM); for the ST/DPA system r₁ = 2.74, r₂ = 0.54 (KT) and r₁ = 2.48, r₂ = 0.49 (TM). It can be concluded that copolymerization of MMA with DPA is ideal while copolymerization of ST with DPA has a small but noticeable tendency for block copolymer building. The probabilities for formations of dyad and triad monomer sequences dependent on monomer compositions were calculated from the obtained reactivity ratios. The molar mass distribution, thermal stability and glass transition temperatures of synthesized copolymers were determined. Hydrophobicity of copolymers depending on the composition was determined using contact angle measurements, decreasing from hydrophobic polystyrene and poly(methyl methacrylate) to hydrophilic DPA. Copolymerization reactivity ratios are crucial for the control of copolymer structural properties and conversion heterogeneity that greatly influence the applications of copolymers as rheology modifiers of lubricating oils or in drug delivery systems. © 2015 Society of Chemical Industry     

Sequence determination of vinyl acetate–methyl acrylate copolymers by NMR spectroscopy

Vinyl acetate/methyl acrylate (V/M) copolymers were prepared by free-radical solution polymerization in benzene. Copolymer compositions were obtained from ¹H-NMR spectroscopy. Reactivity ratios for the copolymerization of V with M were calculated using the Kelen-Tudos (KT) and the nonlinear error in variables (EVM) methods. The reactivity ratios obtained from the KT and EV methods are r_V = 0.04 ± 0.03 and r_M = 7.28 ± 2.88 and r_v = 0.04 ± 0.01 and r_M = 7.28 ± 0.37, respectively. The microstructure was obtained in terms of the distribution of V- and M-centered triad sequences from ¹³C{¹H}-NMR spectra of copolymers. Homonuclear ¹H-2D-COSY and 2D-NOESY NMR were used to determine the most probable conformer for the V/M copolymer. The copolymerization behavior of the V/M copolymers as a function of conversion is also reported. © 1994 John Wiley & Sons, Inc.     

Synthesis and characterization of perfluorinated acrylate–methyl methacrylate copolymers

A novel perfluorinated acrylic monomer 3,5‐bis(perfluorobenzyloxy)benzyl acrylate (FM) with perfluorinated aromatic units was synthesized with 3,5‐bis(perfluorobenzyl)oxybenzyl alcohol, acryloyl chloride, and triethylamine. Copolymers of FM monomer with methyl methacrylate (MMA) were prepared via free‐radical polymerization at 80°C in toluene with 2,2′‐azobisisobutyronitrile as the initiator. The obtained copolymers were characterized by ¹H‐NMR and gel permeation chromatography. The monomer reactivity ratios for the monomer pair were calculated with the extended Kelen–Tüdos method. The reactivity ratios were found to be r₁ = 0.38 for FM, r₂ = 1.11 for MMA, and r₁r₂ < 1 for the pair FM–MMA. This shows that the system proceeded as random copolymerization. The thermal behavior of the copolymers was investigated by thermogravimetric analysis and differential scanning calorimetry (DSC). The copolymers had only one glass‐transition temperature, which changed from 46 to 78°C depending on the copolymer composition. Melting endotherms were not observed in the DSC traces; this indicated that all of the copolymers were completely amorphous. Copolymer films were prepared by spin coating, and contact angle measurements of water and ethylene glycol on the films indicated a high degree of hydrophobicity. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation of supramolecular corrosion-inhibiting nanocontainers for self-protective hybrid nanocomposite coatings

The copolymers were prepared by the photo-induced copolymerization of methyl methacrylate (MMA, M ₁ ) with 4-methacryloyl-1,2,2,6,6-pentamethyl-piperidine (MPMP, M ₂ ) in benzene solution at ambient temperature. The reactivity ratios for these monomers were measured by running a series of reactions at various feed ratios of initial monomers, and the copolymer compositions were determined by ¹H NMR spectroscopy. The reactivity ratios of the monomers were found to be r ₁ ?=?0.28 and r ₂ ?=?1.63 by the application of extended Kelen-Tüdos method. The results showed that, MMA preferred to copolymerization while MPMP tended to homopolymerization in the copolymerization system. The sequence structures of the MMA/MPMP copolymers were characterized by ¹H NMR spectroscopy. The backbone structures of the MMA/MPMP copolymers were mainly composed of a syndiotactic and an isotactic configuration. Three kinds of the sequences of rr, rr’ and lr’ in the syndiotactic configuration and two kinds of the sequences of km’ and mm’ as the isotactic configuration were found. The sequential distribution and the sequence-length distribution in the MMA/MPMP copolymers were also obtained.     

Free radical copolymerization of N,N‐dimethylaminoethyl methacrylate with styrene and methyl methacrylate: monomer reactivity ratios and glass transition temperatures

BACKGROUND: The properties of copolymers depend strongly on their composition; therefore in order to tailor some for specific applications, it is necessary to control their synthesis, and, in particular, to know the reactivity ratios of their constituent monomers. Free radical copolymerizations of N,N‐dimethylaminoethyl methacrylate (DMAEM) with styrene (ST) and methyl methacrylate (MMA) in toluene solution using 1‐di(tert‐butylperoxy)‐3,3,5‐trimethylcyclohexane as initiator at 70 °C were investigated. Monomer reactivity ratios were determined for low conversions using both linear and nonlinear methods. RESULTS: For the DMAEM/ST system the average values are r₁ = 0.43 and r₂ = 1.74; for the DMAEM/MMA system the average values are r₁ = 0.85 and r₂ = 0.86. The initial copolymerization rate, R_p, for DMAEM/ST sharply decreases as the content of ST in the monomer mixture increases up to 30 mol% and then attains a steady value. For the DMAEM/MMA copolymerization system the composition of the feed does not have a significant influence on R_p. The glass transition temperatures (T_g) of the copolymers were determined calorimetrically and calculated using Johnston's sequence length method. A linear dependence of T_g on copolymer composition for both systems is observed: T_g increases with increasing ST or MMA content. CONCLUSION: Copolymerization reactivity ratios enable the design of high‐conversion processes for the production of copolymers of well‐defined properties for particular applications, such as the improvement of rheological properties of lubricating mineral oils. Copyright © 2009 Society of Chemical Industry     

Coordination copolymerization of butadiene and isoprene with rare earth chloride–alcohol–aluminum trialkyl catalytic systems

Butadiene and isoprene were copolymerized with LnCl₃–ROH–AIR₃ catalytic system. The products obtained were confirmed to be copolymers by their glass transition temperatures and characteristic pyrolytic chromatograms, etc. The equation for copolymerization rate may be expressed as R_p = K_p(M)²(cat). The rate constants of copolymerization, activation energy, and monomer reactivity ratios for catalytic systems containing various rare earth elements in III-B family and different solvents were determined. It was found that the reactivity ratio of butadiene was greater than that of isoprene and r₁r₂ near 1, and the composition and microstructure of copolymers were not much affected by variation of polymerization conditions. Both monomer repeat units in the copolymers had cis-1,4 contents above 95%, which is a distinguishing feature of coordination polymerization with the lanthanide catalyst system.     

Relations of weight-average molecular weights and the thermal properties of N-cyclohexyl maleimide–methyl methacrylate

N-cyclohexyl maleimide (CHMI) was used to copolymerize with methyl methacrylate (MMA) by a suspension copolymerization method to produce heat-resistant poly(MMA) (PMMA) in this article. The copolymers were synthesized by changing the weight fractions of azobisisobutyronitrile (AIBN) and dodecanethiol (DDM), while the weight ratio of CHMI to MMA was defined. The effects of the weight fractions of AIBN and DDM on weight-average molecular weight (M_w) were studied. Meanwhile, relations between M_w and the glass transition temperature (T_g) and decomposition temperature (T_d) and M_w and the melt flow index (MFI) were described. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 70: 2001–2005, 1998     

Fluid‐particle drag in inertial polydisperse gas–solid suspensions

In this article, we extend the low Reynolds number fluid‐particle drag relation proposed by Yin and Sundaresan for polydisperse systems to include the effect of moderate fluid inertia. The proposed model captures the fluid‐particle drag results obtained from lattice‐Boltzmann simulations of bidisperse and ternary suspensions at particle mixture Reynolds numbers ranging from 0 ≤ Re_mix ≤ 40, over a particle volume fraction range of 0.2 ≤ ? ≤ 0.4, volume fraction ratios of 1 ≤ ?_i/?_j ≤ 3, and particle diameter ratios of 1 ≤ d_i/d_j ≤ 2.5. © 2009 American Institute of Chemical Engineers AIChE J, 2010     

Properties of vinyl chloride–propylene copolymers prepared by incremental feed and batch feed procedures

A procedure is described for preparation of uniform-composition copolymers of vinyl chloride–propylene, polymers whose composition does not vary as a function of polymer conversion. Inherent viscosity (IV) and melt flow (MF) properties of these resins were determined. These were related to the propylene content (%P_B) of the polymer. A linear relationship was found for IV versus %P_B and log MF versus %P_B. Variation in copolymer composition as a function of conversion for batch-copolymerized vinyl chloride–propylene (VCM–P) system were calculated using established reactivity ratios. These values of %P_B at different conversions were used to predict the MF and IV values for batch-copolymerized VCM–P systems at different conversions. Experimental verification of these predictive values were made. Close agreement was found for predicted and experimentally determined MF values at different conversions. Unusual effects were observed between the predictive and experimentally determined IV values at different conversions.     

Synthesis and characterization of methyl methacrylate/styrene hyperbranched copolymers via living radical mechanism

Free‐radical copolymerizations of N,N‐diethylaminodithiocarbamoylmethylstyrene (inimer: DTCS) with a methyl methacrylate (MMA)/zinc chloride (ZnCl₂) complex were carried out under UV light irradiation. DTCS monomers play an important role in this copolymerization system as an inimer that is capable of initiating living radical polymerization of the vinyl group. The reactivity ratios (r₁ = 0.56 and r₂ = 0.52: DTCS [M₁]; MMA [M₂]) obtained for this copolymerization system were different from a corresponding model system (alternating copolymer) of a styrene and MMA/ZnCl₂ complex (r₁ = 0.25 and r₂ = 0.056). It was found that the hyperbranched copolymers produced exhibited a random branching structure. It was found that the Lewis acid ZnCl₂ formed the complex not only with MMA but also with the carbamate group of inimer. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2490–2495, 2003     

Radical Copolymerization of 2-(3′-Acryloxy)propoxythioxanthone and 1-Methyl-4-(3′-acryloxy)propoxythioxanthone with Methyl Methacrylate

Two new monomers based on thioxanthone, 2-(3′-acryloxy)propoxythioxanthone (M-2) and 1-methyl-4-(3′-acryloxy)propoxythioxanthone (M-4), were prepared and their radical copolymerization at 70°C with methyl methacrylate (MMA) was studied. By varying the conversion reached for a fixed feed composition, f_MMA=0·983, and using Jaacks method, the reactivity ratios were determined. Identical values of reactivity ratios were found for both systems, with values of r_MMA=2·46 and r_M-2=r_M-4=0·4. The homopolymerization of MMA in the presence of a model compound, 1-methyl-4-propoxythioxanthone, was also examined and confirmed that the thioxanthone chromophore does not have any influence on the free radical polymerization of MMA. © of SCI.     

Copolymerization of butadiene with styrene using a rare‐earth metal compound – dialkylmagnesium – halohydrocarbon catalytic system

Copolymerizations of butadiene (Bd) with styrene (St) were carried out with catalytic systems composed of a rare‐earth compound, Mg(n‐Bu)₂ (di‐n‐butyl magnesium) and halohydrocarbon. Of all the rare earth catalysts examined, Nd(P₅₀₇)₃–Mg(n‐Bu)₂–CHCl₃ showed a high activity in the copolymerization under certain conditions: [Bd] = [St] = 1.8 mol l^?1, [Nd] = 6.0 × 10^?3 mol l^?1, Mg/Nd = 10, Cl/Nd = 10 (molar ratio), ageing for 2 h, copolymerization at 50 °C for 6–20 h. The copolymer of butadiene and styrene obtained has a relatively high styrene content (10–30 mol%), cis‐1,4 content in butadiene unit (85–90%), and molecular weight ([η] = 0.8–1 dL g^?1). Monomer reactivity ratios were estimated to be r_Bd = 36 and r_St = 0.36 in the copolymerization. © 2002 Society of Chemical Industry     

Monomer reactivity ratios for acrylonitrile/ammonium itaconate during aqueous‐deposited copolymerization initiated by ammonium persulfate

Monomer reactivity ratios of acrylonitrile/ammonium itaconate during aqueous‐deposited copolymerization initiated by ammonium persulfate were investigated. Kelen–Tudos method was used to examine the reactivity ratios. It was shown that the reactivity ratios were influenced by the conversions and temperatures of copolymerization. The reactivity ratios in aqueous‐deposited copolymerization system were similar to those in the solution polymerization system at polymerization conversions of less than 5% [reactivity ratio of acrylonitrile (r₁) 0.842 ± 0.02, reactivity ratio of ammonium itaconate (r₂) = 3.624 ± 0.02]. The reactivity ratio of AN rises and that of (NH₄)₂IA decreases, when the polymerization conversion increases till 13%. Aqueous‐deposited copolymerization initiated by AIBN was also studied. It was found that some polymers were formed in water phase and the monomers had different reactivity ratios by comparison with those initiated by ammonium persulfate. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4645–4648, 2006     

Free‐radical copolymerization and kinetic treatment of methyl methacrylate with N‐P‐tolylmaleimide

The free‐radical copolymerization of methyl methacrylate (MMA) with N‐P‐tolylmalemide (NPTMI) at 77°C in cyclohexanone solution initiated by AIBN was studied. The copolymer composition was calculated from the nitrogen content estimated by the Mico–Kijedldahl's method and by elemental analysis. The reactivity ratios have been calculated by Fineman and Ross method. The monomer reactivity ratios were r_NPTMI = 1.24, r_MMA = 2.1. The glass transition temperature (T_g) of the copolymers were determined by torsion braid analysis (TBA). The thermal stability was determined by thermogravimetric analysis (TGA). T₅₀, temperature at which the weight loss reaches 50%, was abstained. The results showed that the M _n and M _w increased, whereas the NPTMI feed content increased. The T_g and T₅₀ increased dramatically. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 867–870, 2004     

Free radical copolymerization of 4-phenylbut-1-en-3-yne with methylmethacrylate

Summary Free radical copolymerization of 4-phenylbut-1-en-3-yne (PB) with methyl methacrylate(MMA) was studied. The polymerization of MMA was inhibited by the presence of small amounts of PB, but the copolymerization yield increased with increase in the PB concentration, and PB-rich copolymers were obtained. The monomer reactivity ratios, r_MMA and r_PB, were found to be 0.096 and 2.83, respectively. The Q and e values of PB were calculated by using the values of MMA and were found to be 2.69 and 0.74, respectively. The slow polymerization and low molecular weights were attributed to the low propagating activity of PB radicals.     

Copolymerization of ethylene–propylene using high‐activity bi‐supported Ziegler–Natta TiCl4 catalyst

Heterogeneous Ziegler–Natta TiCl₄ catalyst using MgCl₂ and SiO₂ as supports was prepared under controlled conditions. Mg(OEt)₂ was used as a starting material and was expected to convert to active MgCl₂ during catalyst preparation. Due to the high surface area and good morphological control, SiO₂ was chosen as well. Slurry copolymerization of ethylene and propylene (EPM) was carried out in dry n‐heptane by using the catalyst system SiO₂/MgCl₂/TiCl₄/EB/TiBA or TEA/MPT/H₂ at temperatures of 40–70°C, different molar ratios of alkyl aluminum : MPT : Ti, hydrogen concentrations, and relative and total monomers pressure. Titanium content of the catalyst was 2.96% and surface area of the catalyst was 78 m²/g. Triisobutyl aluminum (TiBA) and triethyl aluminum (TEA) were used as cocatalysts, while ethyl benzoate (EB) and methyl p‐toluate (MPT) were used as internal and external donors, respectively. H₂ was used as a chain‐transfer agent. Good‐quality ethylene propylene rubber (EPR) of rubber was obtained at the ratio of [TiBA] : [MPT] : [Ti] = 320 : 16 : 1 and polymerization temperature was 60°C. When TiBA was used as a cocatalyst, a higher and more rubberlike copolymer was obtained. For both of the cocatalysts, an optimum ratio of Al/Ti was obtained relative to the catalyst productivity. Ethylene content of the copolymer obtained increased with increasing TiBA concentration, while inverse results were obtained by using TEA. Addition of H₂ increased the reactivity of the catalyst. The highest product was obtained when 150 mL H₂/L solvent was used. Increasing temperature from 40 to 70°C decreased the productivity of the catalyst, while irregular behavior was observed on ethylene content. Relative pressure of P_P/P_E = 1.4 : 1 and total pressure of 1 atm was the best condition for the copolymerization. Polymers with ethylene contents of 25–84% were obtained. Increasing ethylene content of EPR decreased T_g of the polymer obtained to a limiting value. Viscosity‐average molecular weight (M_v) decreased with increasing temperature and TiBA and H₂ concentration. However, increasing the polymerization time increased the M_v. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2597–2605, 2004     

Synthesis of cyclohexanone formaldehyde resin‐methylmethacrylate block‐graft copolymers via ATRP

Well defined block‐graft copolymers of cyclohexanone‐formaldehyde resin (CFR) and methylmethacrylate (MMA) were prepared via atom transfer radical polymerization (ATRP). In the first step, cyclohexanone formaldehyde resin (CFR) containing hydroxyl groups were modified with 2‐bromopropionyl bromide. Resulting multifunctional macroinitiator was used in the ATRP of MMA using copper bromide (CuBr) and N,N,N′,N″,N″‐pentamethyl‐diethylenetriamine (PMDETA) as catalyst system at 90°C. The chemical composition and structure of the copolymers were characterized by nuclear magnetic resonance (¹H‐NMR) spectroscopy, Fourier transform infrared (FTIR) spectroscopy, and molecular weight measurement. Molecular weight distributions of the CFR graft copolymers were measured by gel permeation chromatography (GPC). M_n values up to 19,000 associated with narrow molecular weight distributions (polydispersity index (PDI) < 1.6) were obtained with conversions up to 49%. Coating properties of synthesized graft copolymers such as adhesion and gloss values were measured. They exhibited good adhesion properties on Plexiglas substrate. The thermal behaviors of all polymers were conducted using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Cation field-strength effects on ion irradiation-induced mechanical property changes of borosilicate glass structures

We examine the impact of the glass network-modifier cation field strength (CFS) on ion irradiation-induced mechanical property changes in borosilicate (BS) glasses for the ternary M₂O–B₂O₃–SiO₂ systems with M = {Na, K, Rb} and the quaternary [0.5M₍₂₎O–0.5Na₂O]–B₂O₃–SiO₂ systems with M = {Li, Na, K, Rb Mg, Ca, Sr, Ba}. ¹¹B nuclear magnetic resonance (NMR) experiments on the as-prepared BS glasses yielded the fractional population of four-coordinated B species (B^[4]) out of all {B^[3], B^[4]} groups in the glass network, along with the fraction of B^[4]–O–Si linkages out of all B^[4]–O–Si/B bonds. Both parameters correlated linearly with the (average) CFS of the M⁺ and/or {M⁽²⁾⁺, Na⁺} cations. Both the nanoindentation-derived hardness and Young's modulus values of the glasses reduced upon their irradiation by Si²⁺ ions, with the property deterioration decreasing linearly with increasing M^z+ CFS, that is, for higher M^z+⋅⋅⋅O interaction strength. The irradiation damage of the glass network also increased linearly with the fraction of B^[4]–O–Si linkages, which are the second weakest in the structure after the M^z+⋅⋅⋅O bonds. Our results underscore the advantages of employing BS glasses with high-CFS cations for enhancing the radiation resistance for nuclear waste storage.     

Macromers by carbocationic polymerization

Summary The reactivity ratio of -(p-vinylphenyl) polyisobutylene (p-polyisobutenylstyrene, PIB-St) macromers in copolymerization with methyl methacrylate (MMA) and styrene (St) has been examined at various conversions in various solvents and with three macromer chain lengths. Examination of copolymerization reactivity ratios in PIB-St/MMA and PIB-St/St systems indicate that the reactivity of PIB-St with respect to MMA and St comonomers in various solvents is the same as that of styrene. Larger than expected small-comonomer reactivity ratios (r₂) obtained at high conversions and high macromer molecular weights have been attributed to the onset of microphase separation during copolymerization.     

Copolymerization of methyl methacrylate with 4‐vinylpyridine initiated by a novel Ni(II)α‐Benzoinoxime complex

Copolymerizations of methyl methacrylate (MMA) with 4‐vinylpyridine (4VP) were performed from different monomer feed ratios in 1,4‐dioxan at 30°C under free radical initiation experimental conditions, using Ni(II)α‐Benzoinoxime complex as initiator. The obtained copolymers (PMMA4VP) were examined by FTIR and ¹H NMR spectroscopies. The composition of these copolymers was calculated, using ¹H NMR spectra and elemental analysis. Monomer reactivity ratios were estimated from Fineman–Ross (FR, r_m = 0.550, r_v = 1.165) and Kelen–Tudos (KT, r_m = 0.559, r_v = 1.286) linearization methods, as well as nonlinear error in variables model (EVM) method using the RREVM computer program (RREVM, r_m = 0.559, r_v = 1.264). These values suggest that MMA‐4VP pair copolymerizes randomly. ¹H NMR spectra provide information about the stereochemistry of the copolymers in terms of sequence distributions and configurations. These results showed that the age of the Ni complex has an impact not only on its activity towards polymerization reactions but also on the features of the corresponding copolymers, whereas the chemical composition was insensitive to this prominent factor. The mechanism of MMA‐4VP copolymerization is consistent with a radical process as supported by microstructure and molecular weight distribution studies. Thermal behaviours of these copolymers were investigated by differential scanning calorimetry and thermogravimetric analysis. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008