PBT/PC合金塑料的性能与微观结构

分别以丙烯酸酯与缩水甘油酯双官能化的乙烯类弹性体KT-22与具有核-壳结构的S-2001作为增韧剂,以聚对苯二甲酸丁二醇酯(PBT)与聚碳酸酯(PC)作为基体材料,通过熔融共混挤出工艺,制得高韧性的PBT/PC合金。研究了增韧剂含量对合金的力学性能、流动速率、维卡软化温度的影响;用SEM对PBT/PC合金塑料的断面形貌进行了分析研究。结果表明:增韧剂KT-22和S-2001对PBT/PC合金塑料具有良好的增韧作用,但弹性体S-2001的增韧效果优于弹性体KT-22。     

Properties of ternary in situ polycarbonate/polybutylene terephthalate/liquid crystalline polymer composites

Ternary in situ polycarbonate (PC)/polybutylene terephthalate (PBT)/liquid crystalline polymer (LCP) composites were prepared by injection molding. The liquid crystalline polymer used was a versatile Vectra A950. The matrix of composite was composed of PC/PBT 60/40 by weight. A solid epoxy resin (bisphenol type‐A) was used as a compatibilizer for the composites. Dynamic mechanical analysis (DMA) showed that epoxy resin was effective to improve the compatibility between PC and PBT, and between PC/PBT and LCP, respectively. Tensile tests revealed that the stiffness of composites shows little change with the LCP content up to 10 wt %. Above this concentration, the stiffness tended to increase with increasing LCP content. Furthermore, the tensile strengths appeared to increase with increasing LCP content, and their values were close to those predicted from the rule of mixtures. Scanning electron microscopic examination showed that LCP ribbons and short fibrils were developed in the composites containing LCP content ≤10 wt %. However, fine and elongated fibrils were formed in the skin and core sections of the composites when the LCP content reached 25 wt % and above. Thermogravimetric analysis indicated that the thermooxidative stability of the PC/PBT 60/40 blend tended to improve with increasing LCP content. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1827–1835, 1999     

增韧改性聚对苯二甲酸丁二酯/聚碳酸酯共混物非等温结晶动力学与力学性能

The polybutylene terephthalate (PBT）/ polycarbonate (PC）blends modified by toughening agent（S-2001）consisting of methyl methacrylate, styrene and silicone were prepared via melt blending.The non-isothermal crystallization kinetics of the blends were investigated by scanning calorimetry (DSC）at different cooling rate of 5℃·min^-1,10℃·min^-1,15℃·min^-1, and the data were analyzed by using modified Avrami theories of the Jeziorny method.The influence of toughening agent相似文献   

Open‐cell foams of polyethylene terephthalate/bisphenol a polycarbonate blend

Open microcellular foams of polyethylene terephthalate (PET)/polycarbonate (PC) blends were prepared by controlling their foaming behavior at the interface between these two polymers. Interface modification was a crucial factor in governing the foaming behavior and cell morphology of the blend foams: annealing at 280°C, i.e., conducting the transesterification reaction, generates a PET‐b‐PC copolymer, which lowers the interfacial tension, increases the affinity between PET and PC, and decreases the crystallinity of the PET domains. When CO₂ foaming was performed at the interface modified with the copolymer, an interesting fibril‐like structure was formed. The cell density of the PET/PC blend then increased, and its cell size reduced to the microscale while maintaining a high open‐cell ratio. The effect of heat annealing (transesterification reaction) on CO₂‐foaming was studied to reveal the relationship among the interface affinity, crystallinity, and degree of fibrillation. The optimal heat‐annealing procedure generated a fibril‐like structure in the PET/PC blend foams with a high cell density (7 × 10¹¹ cm^?3), small cell size (less than 2 μm), and 100% open‐cell ratio. POLYM. ENG. SCI., 55:375–385, 2015. © 2014 Society of Plastics Engineers     

Melt rheology of polyarylate/polybutylene terephthalate blends

The viscosity, the activation energy of flow, and the exchange reactions of bisphenol A 50/50 isophthalic/terephthalic acid and poly(butylene terephthalate) blends are studied by means of an extrusion capillary rheometer, covering a range of 10 s^?1 to 300 s^?1 shear rate and 280°C to 300°C temperature. The results are interpreted in terms of compatibility and free volume additivity. The decrease in viscosity with time is explained as a result of transesterification rather than degradation.     

Effect of various added compatibilizers on the crystalline structure of polypropylene homopolymer/polybutylene terephthalate and polypropylene copolymer/polybutylene terephthalate polymer blends

Blends of semicrystalline isotactic polypropylene homopolymer and polypropylene copolymer with polybutylene terephthalate with different compatibilizers [i.e., styrene acrylonitrile, Surlyn, styrene–ethylene–butadiene styrene (SEBS), block copolymer and SEBS block copolymer grafted with maleic anhydride] were prepared by melt blending. Wide angle‐X‐ray scattering patterns of injection moldings were obtained. The crystallinity index and d‐spacing were calculated with different concentrations of different compatibilizers. X‐ray results in the structural investigation of the compatibilized blends correlated well with the different compatibilizer concentrations. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1190–1193, 2003     

Thermal stability of native polybutylene terephthalate

The thermal and thermooxidative stability of polybutylene terephthalate (PBTP), synthesized in the presence of the optimal stabilizing system, has been investigated. The basic products of PBTP degradation and the regularities of their formation in the temperature regime close to the temperature regimes of its processing were determined. The investigations conducted allowed recommendations to be made on the temperature regimes of PBTP processing because even a small excess of the chosen temperature (265°C) leads to polymer chain fragmentation. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2351–2356, 2004     

Kinetics of drying polybutylene terephthalate and polyethylene terephthalate granulate

In studying the dynamics of drying of PBT and PET granulate, the parameters of the process that ensure sufficient process stability of their melts were determined. It was found that the rate of self-ordering of structural elements in the polymer substrate in drying is higher in PBT than in PET due to the greater flexibility of the macromolecules. __________ Translated from Khimicheskie Volokna, No. 1, pp. 7–10, January–February, 2006.     

PBT非等温结晶动力学

用差示扫描量热法研究聚对苯二甲酸丁二酯（PBT）的非等温结晶动力学，并分别用Ozawa,Jeziorny和考虑综合因素法来处理PBT的非等温结晶数据。结果表明，PBT非等温结晶过程与Ozawa动力学方程相吻合，但不符合用Jeziorny方法处理的Avrami动力学方程；综合考虑温度和结晶程度对聚合物结晶速度的影响。PBT非等温结晶过程符合结晶动力学方程。     

Action of alkali on polybutylene terephthalate and polyethylene terephthalate polyesters

The two polyesters (polybutylene terephthalate and polyethylene terephthalate) were treated with aqueous as well as alcoholic solutions of sodium hydroxide at varying temperatures for different durations of time. The results were evaluated in terms of the loss in weight of the samples. The fabric samples of polyethylene terephthalate showed a greater degree of weight loss as compared to those of polybutylene terephthalate. The mechanism for the differences in the action of alkali on these two polyesters is explained. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 1097–1102, 2000     

Influence of the morphology on the fire behavior of a polycarbonate/poly(butylene terephthalate) blend

Polycarbonate/Poly(butylene terephthalate) (PC/PBT) blends are used in various industrial sectors, particularly in the cable industry. In this work, the fire behavior of PC/PBT blends was studied for the entire range of blend composition to investigate the relation between fire properties and blend morphology. The morphology of the binary blends used presents a phase inversion point for 25–30 wt % PBT. Various tests have been performed to characterize the fire behavior [limiting oxygen index (LOI), epiradiator test, cone calorimeter, and pyrolysis combustion flow calorimeter (PCFC)]. A change in fire behavior has been observed when the PBT content increases from 20 to 30 wt %, corresponding to the phase inversion, from a continuous rich-PC phase to a continuous rich-PBT phase. Consequently, it can be suggested that the control of the morphology of binary polymer blends is crucial to improve their fire properties. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Morphology development and crystallization behavior of a poly(ethylene terephthalate)/polycarbonate blend

The morphology development and crystallization behavior of an extruded poly(ethylene terephthalate)/polycarbonate blend were studied with optical microscopy, light scattering, and differential scanning calorimetry (DSC). During annealing at 280°C, liquid–liquid phase separation via spinodal decomposition proceeded in a melt‐extruded specimen. After the formation of the domain structure, the blend slowly underwent phase homogenization by transesterification between the two polymers. The specimen, annealed for various times (t_s's) at 280°C, was subjected to a temperature drop to 180°C for the isothermal crystallization, and then the effects of liquid‐phase changes on crystallization were investigated. The crystal growth rate decreased with t_s. The slow crystallization with a large t_s value was associated with the composition change of the separated phases and the change of the sequence distribution in the polymer chains during annealing. The influence of t_s on the endothermic behavior of the samples was examined. As t_s increased, the recrystallization rate was retarded during the DSC scan, displaying multiendothermic behavior. The DSC data also suggested that the increased level of transesterification would give rise to a higher number of species being rejected from the primary crystals, leading to enhanced secondary crystallization. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Impact fatigue of a polycarbonate/acrylonitrile-butadiene-styrene blend

This study analyzes the impact properties of a polycarbonate/acrylanitrile-butadiene-styrene (PC/ABS) blend. The specimens were prepared under various injection molding conditions, including filling time, melting temperature, and mold temperature. Impact tests were performed with a Dynatup drop weight impact tester at different impact energies (10, 15, 20, 25 J). The fracture mechanism was examined with a scanning electron microscopy. The results indicated that the load-time history of the PC/ABS blend has approximately a sinusoidal form in impact. The best injection molding conditions are a filling time of 12 s, a melting temperature of 260°C and a mold temperature of 80°C. In this case, the specimen shows the highest energy absorbed in single impact, together with the highest impact number in impact fatigue. The impact number and the accumulation energy seem to follow an exponential curve as the impact energy decreases. The PC/ABS blend material clearly exhibited ductile fracture with a continuous reduction in strength by viscoplastic deformation. The higher the impact number, the higher the accumulation energy. The accumulation energy of impact fatigue with impact energy 10 J is about 35–45 times greater than the energy absorbed in single impact. Tearing, shear fracture, and plastic deformation are the major fracture mechanisms of the PC/ABS blend matrix in single impact and repeated impact conditions.     

聚对苯二甲酸丁二醇酯的热分解动力学研究

通过热重分析(TGA)法研究了聚对苯二甲酸丁二醇酯(PBT)在氮气气氛中不同升温速率下的热分解过程,采用不同的动力学数据处理方法研究了PBT的热分解机理。结果表明:采用Kissinger法、FlynnWall-Ozawa法和Friedman法计算PBT的热分解反应活化能分别为179.93,175.83,161.07 kJ/mol,平均值为172.28 kJ/mol,与Coast-Redfern法计算的活化能180.41 kJ/mol接近,取PBT热分解反应活化能为180.41kJ/mol,计算得指前因子为2.68×10~(10)s~(-1);采用Coast-Redfern法和Criado法研究了PBT的固相热分解反应机理,认为PBT的热分解机理属于相边界控制的收缩圆柱体反应机理,反应级数为0.5。     

Fracture of polybutylene terephthalate (PBT) film

Combined effects of thickness and temperature on essential work of fracture (EWF) of polybutylene terephthalate (PBT) film were studied using single edge notched tension (SENT) and double edge notched tension specimens. It is found that specific essential work of fracture (w_e) for PBT is independent of temperature below T_g (≈80 °C), but decreases above T_g. Between temperatures 25 and 100 °C, w_e was independent of film thickness in the range 0.125-0.375 mm. The specific non-essential work of fracture (βw_p) was temperature and thickness dependent, being greater for the SENT type specimens. Specimen orientation had no influence on w_e but strongly affected βw_p. It was found that βw_p is greater for cracks propagating normal to the extrusion direction as compared to the parallel direction.     

聚对苯二甲酸丁二醇酯切片中游离四氢呋喃含量的测定

采用乙二醇做萃取剂,150℃加热回流2.5 h处理聚对苯二甲酸丁二醇酯(PBT)切片试样,再以异丙醇为内标物,采用气相色谱内标工作曲线法测定了PBT切片中游离四氢呋喃(THF)的含量.结果表明:该方法加标回收率为96.3％～98.6％,相对标准偏差为2.6％～3.5％,均符合国家标准对化学方法的准确度和精密度的要求;与...     

Flame retardancy of polybutylene terephthalate blended with various oxides

The flame retardancy of polybutylene terephthalate (PBT) was studied focusing on the effect of various oxides. Thermo-gravimetric analysis, pyrolysis/gas chromatography/mass spectrometry, and elemental analysis (EA) were used to analyze the flame retardancy, which were observed through the UL-test and a cone calorimeter. Many oxides influenced the flame retardancy and some of them could suppress the flammability of PBT. In particular, the blended-PBTs with ZnO and V₂O₅ accelerated the degradation and the edges of oxygen consumption were shorter than neat-PBT although the flammability became poorer. The quantitative analysis of the scission products and the results of EA showed that hydrolysis, successive dehydration, and other various reactions changed the scission route to generate less flammable products. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effects of hybrid nucleating agents on glass fiber‐reinforced polyethylene terephthalate/polybutylene terephthalate alloy crystallization

In this article, the Surlyn® 8920 and AX 8900 were mixed as hybrid nucleating agents for glass fiber (GF)‐reinforced polyethylene terephthalate (PET)/polybutylene terephthalate (PBT) alloy. The crystallization behaviors on GF‐reinforced PET/PBT alloy with compound nucleating agents of Surlyn® 8920 and AX 8900 were studied by differential scanning calorimeter. The Jeziorny method, Mo method, and Kissinger method were used for studying the non‐isothermal crystallization process of the composite alloys. While single AX 8900 cannot further improve the crystallization properties of the alloy and reduced the crystallization rate, the introduction of Surlyn® 8920 can effectively ameliorate the condition. The results demonstrated the hybrid nucleating agents of Surlyn® 8920 and AX 8900 not only can accelerate crystal growth, but also can significantly reduce the energy barrier, and it has a good effect in the alloy to the nucleation. POLYM. COMPOS. 37:1167–1172, 2016. © 2014 Society of Plastics Engineers     

我国聚对苯二甲酸丁二醇酯的供需分析

概述了聚对苯二甲酸丁二醇酯(PBT)的生产方法,分析了我国PBT的供需现状及发展前景,提出了今后的发展建议。     

The transesterification of bisphenol-a polycarbonate (PC) and polybutylene terephthalate (PBTP): A new route to block copolycondensates

In this work, the exchange reaction taking place in molten blends of bisphenol-A polycarbonate and polybutylene terephthalate was studied. A direct transesterification mechanism catalyzed by titanium residues, present in commercial PBTP, was deduced. The transesterification reaction can be -stopped at various levels by additives capable of complexing the titanium catalyst. This work enhances the possibility of a new approach in macromolecular engineering by directly combining polycondensates in a processing machine such as an extruder.