Enhanced microwave-absorbing properties of FeCo magnetic film-functionalized silicon carbide fibers fabricated by a radio frequency magnetron method

Silicon carbide (SiC) fibers have potential application in microwave absorption materials in recent years. In this study, we provide a new method for improving the microwave-absorbing properties of SiC fibers. Magnetic FeCo films were fabricated on SiC fibers at low temperature and high vacuum by a radio frequency magnetron sputtering method. The properties of FeCo film/SiC fiber (FeCo/SiC_f) composites were investigated. When compared with SiC fiber, the FeCo/SiC_f composites exhibit excellent microwave-absorbing properties in the microwave range, with enhancements in the optimal reflectivity loss from −5.03 to −25.51 dB. This excellent performance may be because of the magnetic loss due to ferromagnetic resonance and interfacial polarization, thus inducing dielectric relaxation. In addition, the magnetic properties of FeCo/SiC_f composites are significantly improved: the value of saturation magnetization reaches up to 41.45 emu/g and the coercivity is 116.27 Oe. In addition, the strength of SiC fiber remains at 99.17% after the fabrication process. The method provided in this study for enhancing the microwave-absorbing properties of FeCo/SiC_f composites will pave a new way for the development of SiC microwave-absorbing materials.     

Mechanical properties and strengthening mechanism of SiCf/SiC mini-composites modified by SiC nanowires

The effects of the SiC nanowires (SiCNWs) and PyC interface layers on the mechanical and anti-oxidation properties of SiC fiber (SiC_f)/SiC composites were investigated. To achieve this, the PyC layer was coated on the SiC_f using a chemical vapour infiltration (CVI) method. Then, SiCNWs were successfully coated on the surface of SiC_f/PyC using the electrophoretic deposition method. Finally, a thin PyC layer was coated on the surface of SiC_f/PyC/SiCNWs. Three mini-composites, SiC_f/PyC/SiC, SiC_f/PyC/SiCNWs/SiC, and SiC_f/PyC/SiCNWs/PyC/SiC, were fabricated using the typical precursor infiltration and pyrolysis method. The morphologies of the samples were examined using scanning electron microscopy and energy dispersive X-ray spectrometry. Tensile and single-fibre push-out tests were carried out to investigate the mechanical performance and interfacial shear strength of the composites before and after oxidization at 1200 °C. The results revealed that the SiC_f/PyC/SiCNWs/SiC composites showed the best mechanical and anti-oxidation performance among all the composites investigated. The strengthening and toughening is mainly achieved by SiCNWs optimization of the interfacial bonding strength of the composite and its own nano-toughening. On the basis of the results, the effects of SiCNWs on the oxidation process and retardation mechanism of the SiC_f/SiC mini-composites were investigated.     

Improvement of toughness of reaction bonded silicon carbide composites reinforced by surface-modified SiC whiskers

To improve the reliability, especially the toughness, of the reaction bonded silicon carbide (RBSC) ceramics, silicon carbide whiskers coated with pyrolytic carbon layer (PyC-SiC_w) by chemical vapor deposition (CVD) were introduced into the RBSC ceramics to fabricate the SiC_w/RBSC composites in this study. The microstructures and properties of the PyC-SiC_w/RBSC composites under different mass fraction of nano carbon black and PyC-SiC_w were investigated methodically. As a result, a bending strength of 550 MPa was achieved for the composites with 25 wt% nano carbon black, and the residual silicon decreased to 11.01 vol% from 26.58 vol% compared with the composite of 15 vol% nano carbon black. The fracture toughness of the composites reinforced with 10 wt% PyC-SiC_w, reached a high value of 5.28 MPa m^1/2, which increased by 39% compared to the RBSC composites with 10 wt% SiC_w. The residual Si in the composites deceased below to 7 vol%, resulting from the combined actively reaction of nano carbon black and PyC with more Si. SEM and TEM results illustrated that the SiC_w were protected by PyC coating. A thin SiC layer formed of outer surface of whiskers can provide a suitable whisker-matrix interface, which is in favor of crack deflection, SiC_w bridging and pullout to improve the bending strength and toughness of the SiC_w/RBSC composites.     

Magnetic sputtering of FeNi/C bilayer film on SiC fibers for effective microwave absorption in the low-frequency region

It is a great challenge in promoting a microwave absorber with excellent absorbing properties in the low-frequency region. Herein, SiC fibers (SiC_f) coated by a bilayer of FeNi/C (SiC_f/FeNi/C) are fabricated via a two-step magnetron sputtering method. Owing to the improved dielectric loss, magnetic loss, and impedance matching, the reflection loss of SiC_f/FeNi/C is remarkably enhanced. Accordingly, the minimum reflection loss of SiC_f/FeNi/C reaches ?26.18 dB at a low-frequency region of 3.44 GHz. Besides, the mechanic strength of SiC_f/FeNi/C maintains at 2.32 GPa as compared to as-received SiC_f. Thus, SiC_f/FeNi/C is expected to be an ideal structure material to meet low-frequency microwave absorption requests.     

Optimization of the microwave absorptivity of SiCf/Resin composites in the GHz range

The effects of structural factors on the electromagnetic wave absorption properties of SiC fibre reinforced resin composites (SiC_f/Resin) were investigated. Transmission line theory was used to calculate the reflection loss and to tap the potential of SiC fibres as broadband wave absorbents. The structure of the SiC_f/Resin composite was optimized based on a double-layered laminate containing high-resistance SiC fibres (H-SiC_f, ρ = 6.5 × 10⁵ Ω cm) in the upper layer and low-resistance SiC fibres (L-SiC_f, ρ = 109.7 Ω cm) in the bottom layer. The calculation suggests that to achieve a high absorptivity better than ?10 dB, the permittivity of the L-SiC_f/Resin bottom layer must be enhanced to quite a high value with a specific frequency dispersion degree. The desired permittivity was realized by controllable addition of carbon black into L-SiC_f/Resin. Under the optimized thickness combination, the reflection loss of the double-layered composite could be lower than ?13.3 dB in the whole X and Ku bands.     

Preparation of SiCf/Si–O–C composites by impregnation pyrolysis of polysiloxane and its electromagnetic wave absorption properties

High-temperature structural electromagnetic wave (EMW) absorption materials are increasing in demand because they can simultaneously possess the functions of mechanical load-bearing, heatproof, and EMW absorption. Herein, SiC_f/Si–O–C composites were prepared by precursor impregnation pyrolysis using continuous SiC fibers needled felt as reinforcement and polysiloxane as a precursor, respectively. The phase composition, microstructure, complex permittivity, and EMW absorption properties of SiC_f/Si–O–C composites after annealing at various temperatures were investigated. The annealing at 1400–1500°C affects positively the EMW absorption performance of the composites, because the β-SiC microcrystals and SiC nanowires were generated by the activation of carbothermal reduction reaction in the composites, and the aspect ratio of SiC nanowires increased with the rise of temperature. The composites exhibit optimal EMW absorption performance, with the effective absorption bandwidth covering the entire X-band and the minimum reflection loss (RL_min) of −32.8 dB at 4.0 mm when the annealing temperature is raised to 1500°C. This is because that the impedance matching is improved as the rising of ε′ and decreasing of ε″ due to the conversion of free carbon in the composite into SiC nanowires.     

Effect of SiC interphase on the mechanical,high-temperature dielectric and high-temperature microwave absorption properties of the SiCf/SiC/Mu composites

In this study, SiC interphase was prepared via a precursor infiltration-pyrolysis process, and effects of dipping concentrations on the mechanical, high-temperature dielectric and microwave absorption properties of the SiC_f/SiC/Mu composites had been investigated. Results indicated that different dipping concentrations influenced ultimate interfacial morphology. The SiC interphase prepared with 5 wt% PCS/xylene solution was smooth and homogeneous, and no bridging between the fiber monofilament could be observed. At the same time, SiC interphase prepared with 5 wt% PCS/xylene solution had significantly improved mechanical properties of the composite. In particular, the flexural strength of the composite prepared with 5 wt% PCS/xylene solution reached 281 MPa. Both ε′ and ε′′ of the SiC_f/SiC/Mu composites were enhanced after preparing SiC interphase at room temperature. The SiC_f/SiC/Mu composite prepared with 5 wt% PCS/xylene solution showed the maximum dielectric loss value of 0.38 at 10 GHz. Under the dual action of polarization mechanism and conductance loss, both ε′ and ε′′ of the SiC_f/SiC/Mu composites enhanced as the temperature increased. At 700 °C, the corresponding bandwidth (RL ≤ ?5 dB) of SiC_f/SiC/Mu composites prepared with 5 wt% PCS/xylene solution can reach 3.3 GHz at 2.6 mm. The SiC_f/SiC/Mu composite with SiC interphase prepared with 5 wt% PCS/xylene solution is expected to be an excellent structural-functional material.     

The mechanical,thermophysical and electromagnetic properties of UD SiCf/SiC composites in different directions

Unidirectional (UD) silicon carbide (SiC) fiber-reinforced SiC matrix (UD SiC_f/SiC) composites with CVI BN interphase were fabricated by polymer infiltration-pyrolysis (PIP) process. The effects of the anisotropic distribution of SiC fibers on the mechanical properties, thermophysical properties and electromagnetic properties of UD SiC_f/SiC composites in different directions were studied. In the direction parallel to the axial direction of SiC fibers, SiC fibers bear the load and BN interphase ensures the interface debonding, so the flexural strength and the fracture toughness of the UD SiC_f/SiC composites are 813.0 ± 32.4 MPa and 26.1 ± 2.9 MPa·m^1/2, respectively. In the direction perpendicular to the axial direction of SiC fibers, SiC fibers cannot bear the load and the low interfacial bonding strengths between SiC fiber/BN interphase (F/I) and BN interphase/SiC matrix (I/M) both decrease the matrix cracking stress, so the corresponding values are 36.6 ± 6.9 MPa and 0.9 ± 0.5 MPa?m^1/2, respectively. The thermal expansion behaviors of UD SiC_f/SiC composites are similar to those of SiC fibers in the direction parallel to the axial direction of SiC fibers, and are similiar to those of SiC matrix in the direction perpendicular to the axial direction of SiC fibers. The total electromagnetic shielding effectiveness (EM SE_T) of UD SiC_f/SiC composites attains 32 dB and 29 dB when the axial direction of SiC fibers is perpendicular and parallel to the electric field direction, respectively. The difference of conductivity in different directions is the main reason causing the different SE_T. And the dominant electromagnetic interference (EMI) shielding mechanism is absorption for both studied directions.     

Constructing hierarchical Ti3SiC2 layer and carbon nanotubes on SiC fibers for enhanced electromagnetic wave absorption

To enhance the absorption performance of silicon carbide fiber (SiC_f), hybrid fibers with a double shell structure (Ti₃SiC₂ and carbon nanotubes (CNTs)) on the SiC_f (CNT@Ti₃SiC₂@SiC_f) were successfully synthesized by the combination of molten salt method and floating catalytic chemical vapor deposition. A series of 10% weight fraction fibers reinforced paraffin samples was prepared to study the double coating influences on the electromagnetic wave (EMW) absorption performances. Coated by Ti₃SiC₂ and CNTs, the dielectric permittivity of hybrid fibers could be modulated in a quite wide range. The CNT@Ti₃SiC₂@SiC_f with a thickness of 3.8 mm showed a minimum reflection loss value of ?53 dB at 6.57 GHz, and the CNT@Ti₃SiC₂@SiC_f with a thickness of 2.5 mm presented a wide effective absorption bandwidth of 5.6 GHz (from 9 to 14.6 GHz). The highly improved EMW absorption performance of CNT@Ti₃SiC₂@SiC_f was attributed to the combination of conductive loss and dielectric loss aroused by interfaces. The excellent absorption performance provided the modified SiC_f with a high potential in the application of EMW absorbers.     

Effects of grain boundary volume fraction on the threshold dose of irradiation-induced SiC amorphization at 30 °C

SiC fiber-reinforced matrix composites (SiC_f/SiC) have limited applications because of the irradiation-induced shrinkage of SiC fibers; the fiber shrinkage mechanism is still not fully understood. In this study, we tried to clarify the effect of annealing temperature on the proportion of fiber shrinkage and swelling. SiC_f/SiC was irradiated at 30 °C to 100 dpa, and the deterioration of mechanical properties was evaluated after irradiation. The compressive displacement of > 60% of the fibers before failure increased to more than 1.5 times that of the as-received specimen. Significant swelling was observed, indicating that the proportion of swelling was higher than that of shrinkage after irradiation. This can be attributed to the amorphization of SiC, and its amorphization threshold dose increased with decreasing grain boundary volume fraction. The findings of this study provide insights into the mechanism of irradiation-induced fiber amorphization and can be useful in developing improved SiC_f/SiC.     

Impedance matching optimization of SiCf/Si3N4–SiOC composites for excellent microwave absorption properties

SiC fiber reinforced ceramic matrix composites (SiC_f-CMCs) are considered to be one of the most promising materials in the electromagnetic (EM) stealth of aero-engines, which is expected to achieve strong absorption and broad-band performance. Multiscale structural design was applied to SiC_f/Si₃N₄–SiOC composites by construction of micro/nanoscale heterogeneous interfaces and macro double-layer impedance matching structure. SiC_f/Si₃N₄–SiOC composites were fabricated by using SiC fibers with different conductivities and SiOC–Si₃N₄ matrices with gradient impedance structures to improve impedance matching effectively. Owing to its unique structure, SiC_f/Si₃N₄–SiOC composites (A3-composites) achieved excellent EM wave absorption performance with a minimum reflection coefficient (RC_min) of ?25.1 dB at 2.45 mm and an effective absorption bandwidth (EAB) of 4.0 GHz at 2.85 mm in X-band. Moreover, double-layer SiC_f/Si₃N₄–SiOC with an improved impedance matching structure obtained an RC_min of ?56.9 dB and an EAB of 4.2 GHz at 3.00 mm, which means it can absorb more than 90% of the EM waves in the whole X-band. The RC is less than ?8 dB at 2.6–2.8 mm from RT to 600 °C in the whole X-band, displaying excellent high-temperature absorption performance. The results provide a new design opinion for broad-band EM absorbing SiC_f-CMCs at high temperatures.     

Fabrication of SiCf/SiC-mullite composite with improved pretreatment condition via precursor infiltration-sintering combined with infiltration-pyrolysis process

SiC fiber/ceramic matrix composite has potential applications in military and civil fields due to their excellent microwave absorption performances, light weight and oxidation resistance. In this work, the SiC_f/SiC-mullite composite with improved pretreatment condition was fabricated via precursor infiltration-sintering combined with infiltration-pyrolysis process for achieving excellent mechanical and microwave absorption performances. Results indicated that different dehydrations of matrix precursor influenced ultimate mechanical properties of the composites. At the same time, SiC derived from polycarbosilane had significantly improved several properties of the composite. The flexural strength and failure displacement reached 266 MPa and 0.46 mm, respectively. The high loss tangent was related with the interfacial polarization. In addition, a prominent reflection loss value of −45 dB was observed at 9 GHz. What's more, the maximum absorption bandwidth reached 2.9 GHz (from 8.2 to 11.1 GHz). The SiC_f/SiC-mullite composite with improved pretreatment condition is expected to be an excellent structural-functional material.     

Simultaneous enhancement of mechanical and microwave absorption properties with a novel in-situ synthesis α-Al2O3 fillers for SiCf/SiC composites

The Al and H₃BO₃ mixed powder was introduced into the PCS/Xylene precursor solution as in-situ synthesis α-Al₂O₃ filler by precursor infiltration and pyrolysis (PIP) method. The in-situ synthesis filler can effectively decrease the open porosity of SiC_f/SiC composites and give rise to multiple scattering of microwave and dipolar polarization. Therefore, the mechanical and microwave absorption properties of SiC_f/SiC composites can be simultaneously enhanced. The effects of in-situ synthesis filler on the morphologies, flexure strength and reflection loss values of SiC_f/SiC composites were investigated. With 2 wt% in-situ synthesis filler, the flexure strength of SiC_f/SiC composite was 305 MPa and the maximum reflection loss (RL_m) can reach ? 54.68 dB with the effective absorption band (EAB) of 3.51 GHz in the X band. With 5 wt% in-situ synthesis filler, the flexure strength of SiC_f/SiC composite was 207 MPa and the RL_m was ? 30.91 dB. Due to the inefficient infiltration process, the RL_m of SiC_f/SiC composites with 10 wt% in-situ synthesis filler was only ? 27.36 dB. Nevertheless, the flexure strength of that composite was 259 MPa, owing to the dense matrix. Additionally, the flexure strength of SiC_f/SiC composite without filler was 148 MPa and the RL_m was ? 26.40 dB.     

The effects of preparation temperature on the SiCf/SiC 3D4d woven composite

Continuous silicon carbide fiber reinforced silicon carbide matrix (SiC_f/SiC) composites have promising applications in aero-engine due to their unique advantages, such as low density, high modulus and strength, outstanding high temperature resistance and oxidation resistance. As SiC fibers are main reinforcements in SiC_f/SiC composites, the crystallization rate and initial damage degree of SiC fibers are seriously influenced by preparation temperatures of SiC_f/SiC composites, namely mechanical properties of SiC fibers and SiC_f/SiC composites are influenced by preparation temperatures. In this paper, KD-II SiC fibers were woven into 3D4d preforms and SiC matrix was fabricated by PIP process at 1100 °C, 1200 °C, 1400 °C and 1600 °C. Digital image correlation (DIC) method was adopted to measure the uniaxial tensile properties of these SiC_f/SiC composites. In addition, finite element method (FEM) based on representative volume element (RVE) was adopted to predict the mechanical properties of SiC_f/SiC composites. The good agreements between numerical results and experimental results of uniaxial tensile tests verified the validity of the RVE. In last, the transverse tensile, transverse shear, uniaxial shear properties were predicted by this method. The predicted results illustrated that axial tensile, transverse tensile and axial shear properties were greatly influenced by the preparation temperatures of SiC_f/SiC composites while transverse shear properties were not significantly various. And the mechanical properties of SiC_f/SiC composites peaked at 1200 °C among these four temperatures while their values reached their lowest points at 1600 °C because of thermal damage and brittle failure of SiC_f/SiC composites.     

Excellent ablation resistance and reusability of silicon carbide fiber reinforced silicon carbide composite in dissociated air plasmas

This work explores the potentials of SiC fiber reinforced SiC matrix composites (SiC_f/SiC) with SiC coating to resist aerodynamic ablations for thermal protection purpose. A plasma wind tunnel is employed to evaluate their anti-ablation property in dissociated air plasmas. The results suggest a critical ablation temperature of SiC coated SiC_f/SiC, ≈ 1910 °C, which is the highest ever reported in literatures. Benefited by ‘all-SiC’ microstructures and relative flat ablated surfaces, the SiC_f/SiC is still ablation-resistant up to ≈ 1820 °C after the occurrence of ablation. This implies an excellent ablation resistance and reusability property of SiC_f/SiC, which surpasses that of traditional carbon fiber reinforced composites. Finally, an ablation mechanism dominated by surface characteristic is proposed. For the SiC coated SiC_f/SiC, ablation is prone to take place at surface cracks formed by thermal mismatch; while for the ablated SiC_f/SiC, ablation is triggered at the exposed fiber bundles which is over-heated in the plasmas.     

Multifunction properties of SiOC reinforced with carbon fiber and in-situ SiC nanowires

Herein, the SiC nanowires were successfully fabricated via chemical vapor infiltration (CVI) into carbon fiber felts (CFs) and then the SiOC/SiCnws/CFs composites were synthesized by precursor infiltration and pyrolysis (PIP) processes. Results indicated that the lightweight composites possessed enhanced mechanical performance, low thermal conductivity, and excellent electromagnetic wave absorption properties. Detailedly, the compressive strength reached to 22.0 MPa and 9.6 MPa after two PIP processes cycles in z and x/y directions, respectively. Meanwhile, the composites exhibited tailored electromagnetic wave absorption performance with the effective absorption bandwidth of 3.06 GHz, and the minimum reflection loss (RL_min) was -48.2 dB with a thickness of 3.6 mm. The present work has a guidance to prepare and design multifunction properties for application in harsh environment.     

High-temperature electromagnetic wave absorption properties of Cf/SiCNFs/Si3N4 composites

Carbon fibers reinforced Si₃N₄ composites with SiC nanofiber interphase (C_f/SiCNFs/Si₃N₄) were prepared by combining catalysis chemical vapor deposition and gel-casting process. Microstructures, mechanical properties, and electromagnetic wave absorption properties within X-band at 25°C-800°C of C_f/SiCNFs/Si₃N₄ composites were investigated. Results show that SiC nanofibers are combined well with Si₃N₄ matrix and carbon fibers, the fracture toughness is thus increased more than double from 3.51 MPa·m^1/2 of the Si₃N₄ ceramic to 7.23 MPa·m^1/2 of the as-prepared composites. As the temperature increases from 25°C to 800°C, C_f/SiCNFs/Si₃N₄ composites show a temperature-dependent complex permittivity, attenuation constant, and impedance. The relatively high attenuation capability of C_f/SiCNFs/Si₃N₄ composites at elevated temperature results in a great minimum reflection loss of −20.3 dB at 800°C with a thin thickness of 2.0 mm. The superior electromagnetic wave absorption performance mainly originates from conductive loss, multi-reflection, and strong polarization formed by the combined effects of carbon fibers and SiC nanofibers.     

Electromagnetic interference shielding and dielectric properties of SiCf/SiC composites containing pyrolytic carbon interphase

The SiC_f/SiC composites containing various thickness of pyrolytic carbon (PyC) interphase were prepared and their properties were investigated for electromagnetic interference (EMI) shielding applications in the frequency of 8.2–12.4 GHz. The composites containing 310 nm thickness (3.3 vol%) PyC interphase show an about 25 dB shielding effectiveness in the whole frequency band. Interestingly, the contribution of reflection to the EMI shielding effectiveness increases and the contribution of absorption decreases as the PyC interphase thickness increases.     

Electromagnetic wave absorption and mechanical properties of silicon carbide fibers reinforced silicon nitride matrix composites

It is difficult for ceramic matrix composites to combine good electromagnetic wave (EMW) absorption properties (reflection coefficient, RC less than -7 dB in X band) and good mechanical properties (flexural strength more than 300 MPa and fracture toughness more than 10 M P·m^1/2). To solve this problem, two kinds of wave-absorbing SiC fibers reinforced Si₃N₄ matrix composites (SiC_f/Si₃N₄) were designed and fabricated via chemical vapor infiltration technique. Effects of conductivity on EM wave absorbing properties and fiber/matrix bonding strength on mechanical properties were studied. The SiC_f/Si₃N₄ composite, having a relatively low conductivity (its conduction loss is about 33% of the total dielectric loss) has good EMW absorption properties, i.e. a relative complex permittivity of about 9.2-j6.4 at 10 GHz and an RC lower than ?7.2 dB in the whole X band. Its low relative complex permittivity matches impedances between composites and air better, and its strong polarization relaxation loss ability help it to absorb more EM wave energy. Moreover, with a suitably strong fiber/matrix bonding strength, the composite can transfer load more effectively from matrix to fibers, resulting in a higher flexural strength (380 MPa) and fracture toughness (12.9 MPa?m^1/2).     

In-situ synthesis of ternary layered Y3Si2C2 ceramic on silicon carbide fiber for enhanced electromagnetic wave absorption

A novel ternary layered ceramic of Y₃Si₂C₂ was successfully in-situ synthesized on the surface of home-made third-generation KD-SA SiC fiber for the first time by molten salt method aimed at improving the electromagnetic wave (EMW) absorption. After in-situ synthesis of Y₃Si₂C₂ ceramic layer on SiC fiber (SiC_f/Y₃Si₂C₂), significantly improved EMW absorption performance was obtained. The minimum reflection loss (RL_min) of ?16.97 dB was reached in SiC_f/Y₃Si₂C₂ composites at the thickness of only 2.19 mm, and the effective absorption bandwidth (EAB) was up to 5.44 GHz (12.56–18 GHz) at a thin thickness of 2.64 mm. The improvement in EMW absorption of SiC_f/Y₃Si₂C₂ is mainly attributed to enhanced dielectric loss and conduction loss resulting from increased heterogeneous interfaces and multiple reflections and scattering originating from net structure. The SiC_f/Y₃Si₂C₂ could be a promising EMW absorber for application in high-performance EMW absorbing materials.