Ti3C2Tx aerogel with 1D unidirectional channels for high mass loading supercapacitor electrodes

As one of the typical MXenes materials, 2D Ti₃C₂T_x has attracted extensive attention in the field of energy storage. However, due to the restacking problem of Ti₃C₂T_x nanosheets, the electrochemical performance of Ti₃C₂T_x is unsatisfactory. In this paper, a scheme is proposed to obtain 3D aerogel with 1D channels by directional freeze drying of Ti₃C₂T_x. With the help of the unidirectional channels, the 3D Ti₃C₂T_x/Sodium alginate (SA) aerogel can effectively solve the stacking problem of Ti₃C₂T_x nanosheets, and it also accelerates the diffusion of ions. The Ti₃C₂T_x/SA-5 electrode can still reach the mass capacitance of 284.5 F g^?1 and the areal capacitance of 4030.4 mF cm^?2 at 2 mV s^?1 when the loading is 14.2 mg cm^?2 in 1 M H₂SO₄ electrolyte. In addition, the electrode showed good cycling performance without capacitor degradation after 20,000 cycles at 50 mV s^?1. These results suggest that by using the strategy of building special 3D structure of 2D MXene with 1D unidirectional channels, high performance supercapacitor electrodes with high mass loading can be realized.     

Preparation and electrochemical performance of modified Ti3C2Tx/polypyrrole composites

MXenes with a large surface area have been widely studied to improve the pseudocapacitance of electrode materials by combining conductive polymer materials. In this article, a superficial strategy to enhance the electrochemical properties by in situ polymerization of a pyrrole monomer between the Ti₃C₂T_x layers modified with 1,5-naphthalene disulfonic acid (NA) and cetyltrimethylammonium bromide (CTAB) was investigated. It is found that polypyrrole (PPy) and Ti₃C₂T_x can be combined through strong interactions between each other, and the specific capacitance of the modified Ti₃C₂T_x/PPy composite was increased to a maximum value of 437 F g⁻¹, which was more than thrice higher than that of pure PPy. The composite also exhibited good cycling performance (76% capacitance retention after 1000 cycles). Moreover, owing to the synergistic effect between the PPy and Ti₃C₂T_x layers, the composite provided better electron or ion transfer and surface redox processes than that of pure PPy, which indicated that this composite can be used as a promising electrode material for supercapacitors. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47003.     

Fabrication of PANI@Ti3C2Tx/PVA hydrogel composite as flexible supercapacitor electrode with good electrochemical performance

Developing a new strategy to effectively prevent the restacking of MXene nanosheets will have significant impacts on designing flexible supercapacitor electrodes. Herein, a novel Ti₃C₂T_x/polyvinyl alcohol (PVA) porous sponge with 3D interconnected structures is prepared by sol-gel and freeze-dried methods. This Ti₃C₂T_x/PVA porous sponge is used as the template of in-situ polyaniline (PANI) polymerization, and the fabricated PANI@Ti₃C₂T_x/PVA hydrogel composite is applied as flexible supercapacitors electrodes. 1D conductive polymer chains PVA could increase the interlayer spacing of Ti₃C₂T_x nanosheets, which is beneficial to expose more electrochemical active sites. The supercapacitor based on PANI@Ti₃C₂T_x/PVA hydrogel composite exhibits the coexistence of double-layer capacitance and pseudocapacitance behavior. This supercapacitor shows a maximum areal specific capacitance of 103.8 mF cm^?2 at 2 A m^?2, and it also exhibits a maximum energy density of 9.2 μWh·cm^?2 and an optimum power density of 800 μW cm^?2. The capacitance of this supercapacitor is almost not change under different bending angles. Moreover, 99% capacitance retention is achieved after 10 000 charge/discharge cycles of the supercapacitor. The synergistic effect between PANI and Ti₃C₂T_x/PVA composite may improve the number of reactive sites and provide efficient channels for ion diffusion/electron transport.     

Preparation of 3D flower-like Ti3C2Tx microspheres by W/O emulsion-assisted assembly and their application for supercapacitors

In this study, we proposed in situ controlled preparation of 3D flower-like Ti₃C₂T_x microspheres (FMXMSs) by water-in-oil (W/O) emulsion-assisted assembly. Polyethyleneimine (PEI), as a large molecule, can effectively stabilize the emulsion system. Ethylenediamine (EDA), as a weak cross-link agent, contains rich amino groups, which can effectively induce the assembly of Ti₃C₂T_x in spherical droplets and eventually form 3D flower-like Ti₃C₂T_x microspheres. By adjusting the water-oil volume ratio, the size of micro-emulsion droplets can be controlled, thus the structure and size of microspheres can finally be controlled. The structure has a large specific surface area (108.31 m² g^-1) which can provide an effective ion diffusion pathway. As the supercapacitors electrode, the specific capacitance of FMXMSs is up to 224.57 F g^-1 at 5 mV s^-1 and 193.67 F g^-1 at 0.5 A g^-1. Moreover, they also show good long-term cyclic stability. After 5000 cycles, the specific capacitance does not decay. The results indicate that W/O emulsion-assisted assembly is feasible for preparing MXenes microspheres with high electrochemical performance.     

Manganese dioxide nanosheets decorated on MXene (Ti3C2Tx) with enhanced performance for asymmetric supercapacitors

The incorporation of nanosized pseudocapacitive materials and structure design are general strategies to enhance the electrochemical performance of MXene-based materials. Herein, the decoration of manganese dioxide (MnO₂) nanosheets on MXene (Ti₃C₂T_x) surfaces was prepared by a facile liquid phase coprecipitation method. Ti₃C₂T_x is initially modified by polydopamine (PDA) coating to ensure the homogeneous distribution of MnO₂ nanosheets and tight and close connections between MnO₂ and the Ti₃C₂T_x backbone. Due to the obtained three-dimensional (3D) nanostructure, facilitating electron transport within the electrode and promoting electrolyte ion accessibility, the δ-MnO₂@Ti₃C₂T_x-0.06 electrode yields superior electrochemical performances, such as a rather large areal capacity of 1233.1 mF cm^?2 and high specific capacitance of 337.6 F g^?1 at 2 mV s^?1, as well as high cyclic stability for 10000 cycles. Furthermore, δ-MnO₂@Ti₃C₂T_x-0.06 composites are employed as positive electrodes, and activated carbon (AC) materials act as negative electrodes with an aqueous electrolyte of 1 M Na₂SO₄ to assemble asymmetric supercapacitors. The prototype device is reversible at cell voltages from 0 to 1.8 V, and manifests a maximum energy density of 31.4 Wh kg^?1 and a maximum power density of 2700 W kg^?1. These encouraging results show enormous possibilities for energy storage applications.     

Bifunctional Ti3C2Tx–CNT/PANI composite with excellent electromagnetic shielding and supercapacitive performance

Ti₃C₂T_x exhibits excellent electromagnetic (EM) shielding and electrochemical properties. However, the inherent re-stacking tendency and easy oxidation of Ti₃C₂T_x limit its further application. In this study, a multi-walled carbon nanotube/polyaniline composite (CNT/PANI, denoted as C–P) was introduced into Ti₃C₂T_x nanosheets to obtain a Ti₃C₂T_x–CNT/PANI composite (T@CP). Owing to the integrated effects of Ti₃C₂T_x and C–P, the contribution of absorption was significantly improved, which finally enhanced the EM shielding performance of T@CP. The highest total EM shielding effectiveness (SE_T) was close to 50 dB (49.8 dB), which was substantially higher than that of pure Ti₃C₂T_x (45.3 dB). Moreover, T@CP demonstrated outstanding supercapacitive performance. The specific capacitance of T@CP (2134.5 mF/cm² at 2 mV/s) was considerably higher than that of pure Ti₃C₂T_x (414.3 mF/cm² at 2 mV/s). These findings provide a new route for the development of high-efficiency Ti₃C₂T_x-based bifunctional EM shielding and electrochemical materials.     

Fabrication of 2D titanium carbide MXene/Au nanorods as a nanosensor platform for sensitive SERS detection

As an emerging label-free detection technology, surface-enhanced Raman scattering (SERS) has been used for biological detection, food safety, and environmental pollution owing to its high sensitivity, specificity and rapid response. However, traditional SERS substrates are unstable, prone to agglomeration, and demonstrate low productivity and high production cost. In this work, hybrids of a two-dimensional electron gas (2DEG) Ti₃C₂T_x monolayer and Au nanorods (AuNRs) were fabricated via self-assembly. Ti₃C₂T_x:AuNRs ratios were prepared, and each hybrid's SERS activity was evaluated through 4-aminothiophenol (pATP) detection. The Ti₃C₂T_x/AuNRs-1 substrate exhibited the weakest SERS performance, whereas the Ti₃C₂T_x/AuNRs-3 substrate had the best SERS activity enhancement, with a pATP limit of detection (LOD) of 10⁻⁹ M. When 30 sites on substrates were selected for SERS detection, the relative standard deviation (RSD) was found to be only 7.18 %, revealing the good performance sensitivity and high reproducibility of the Raman signal. The sensitivity of Ti₃C₂T_x/AuNRs-3 was also assessed with respect to a hazardous chemical, 1,2-bis (4-pyridyl) ethylene (BPE), revealing an LOD of 10⁻¹² M. For thiram, the LOD of Ti₃C₂T_x/AuNRs-3 was 10⁻⁸ M, which is considerably lower than the 1 ppm industry safety standard. A relative standard deviation RSD of 7.94 % indicates the high reproducibility and uniformity of the Raman signal of thiram for Ti₃C₂T_x/AuNRs-3. Compared with the LODs of 10⁻⁵ M and 10⁻⁶ M for commercial substrates T-SERS and Au nanorod arrays (AuNRAs), respectively, the 10⁻⁸ M LOD of our synthesized Ti₃C₂T_x/AuNRs indicates good sensitivity. Three kinds of pesticides were detected by Ti₃C₂T_x/AuNRs, and only Raman signal of thiram can be found, revealing the good selectivity for thiram. These results for Ti₃C₂T_x/AuNRs suggest its potential to serve as a novel SERS platform.     

Ti3C2Tx-foam as free-standing electrode for supercapacitor with improved electrochemical performance

To prevent restacking of the Ti₃C₂T_x layers, the Ti₃C₂T_x-foam has been successfully synthesized through thermal treatment of Ti₃C₂T_x-film with the hydrazine monohydrate. The interconnected porous structure of Ti₃C₂T_x-foam could effectively reduce the restacking of the Ti₃C₂T_x sheets and shorten the diffusion path of ions and accelerate the intercalation/de-intercalation of ions. The Ti₃C₂T_x-foam-80 used as free-standing electrode achieves a high areal capacitance of 271.2 mF/cm² (122.7?F/g) at a scan rate of 5?mV/s in 1?M KOH electrolyte. It also exhibited a high capability rate of 65.5% from 5?mV/s to 100?mV/s and good cycle life with 88.7% retention of its initial after 10,000 cycles at a scan rate of 50?mV/s.     

Electrochemical storage mechanism of interstratification-assembled Ti3C2Tx MXene/NiCo-LDHs electrode in alkaline,acid and neutral electrolytes

Different kinds of two-dimensional hybrid electrodes have high theoretical capacitance and energy density. However, the origin of the electrochemical storage mechanism still remains elusive in alkaline, acid and neutral electrolytes. Herein, the interstratification-assembled Ti₃C₂T_x MXene/NiCo-LDHs electrodes were successfully prepared and studied in different electrolytes by in-situ Raman spectroscopy. The results show that H₂O molecules in neutral electrolyte combine with –OH at the end of Ti₃C₂T_x MXene during charging, and debonding occurs during discharge. Similarly, this reaction also occurs in the discharge process with NiCo-LDHs and provides smaller pseudocapacitance characteristics. Although this pseudocapacitance reaction also occurs in acidic and alkaline electrolytes, however, the difference is that the hydrogen ions will promote the electrochemical performance of Ti₃C₂T_x MXene and has a certain corrosion consumption effect on NiCo-LDHs, but generally improve the electrochemical performance of Ti₃C₂T_x MXene/NiCo-LDHs. Interestingly, the OH^? in alkaline electrolyte can promote the electrochemical performance of NiCo-LDHs, and produce a new electrochemical reaction with –F between the layers of Ti₃C₂T_x MXene, which greatly improves the overall electrochemical performance of this hybrid electrodes. As a result, Ti₃C₂T_x MXene/NiCo-LDHs electrodes have the best electrochemical performance in alkaline electrolyte with capacitance of 283 F g^?1, energy density of 14.2 Wh kg^?1 and power density of 3007.1 W kg^?1. This work lays a foundation for the preparation of high-performance two-dimensional hybrid electrochemical energy storage devices.     

Effects of specific surface area of electrode and different electrolyte on capacitance properties in nano porous-structure CrN thin film electrode for supercapacitor

Thickness and specific surface area of the film electrode are critical parameters for supercapacitors. The relationship between the thickness and the specific surface area of the film directly affects the capacitance and electrochemical stability performance of super supercapacitors, which virtually affects the contact chance of ion in the electrolyte on the surface of electrode and the ion transport path of electrode. In this paper, the CrN thin films with a thickness of 200–3500 nm are prepared using direct current magnetron sputtering. Atomic force microscopy (AFM) technique is introduced to investigate the relationship between thickness and the specific surface area of the CrN films. The electrochemical performances of CrN electrode with the nanoporousper structure is analyzed in different electrolytes H₂SO₄, Na₂SO₄ and NaCl aquous solutions. The specific surface area of the film increases linearly with the film thickness increases. The areal capacitance is also linearly related to the specific surface area. The spurtted CrN film with a thickness of 3370 nm has a specific surface of up to 43.59 cm² per cm² footprint area. Its areal and volume capacitances reache to 53.92 mF cm^?2 and 650 F cm^?3 at 5 mV s^?1, respectively. In addition, the areal capacitance of CrN film electrode with 655 nm possesses reaches to 40.53 mF cm^?2 for 0.5 M H₂SO₄ solution, 32.69 mF cm^?2 for 0.5 M Na₂SO₄ solution and 9.17 mF cm^?2 for NaCl solution at a scan rate of 5 mV s^?1. Furthermore, the CrN film electrode exhibits excellent capacitance retention of 95.3%, 93.8% and 89.9% in H₂SO₄, Na₂SO₄ and NaCl electrolytes, respectively, after 2000 cycles. Therefore, the sputtered CrN thin film is an potential electrode material for electrochemical supercapacitors.     

3D nanostructured CuxO modified copper foam as a binder-free electrode for all-solid-state supercapacitor

Copper oxides (Cu_xO) play an active role in the field of binder-free electrodes for supercapacitors due to their own advantages, including high theoretical capacity, non-toxicity, low cost, etc. Developing mild and cheap process to prepare Cu_xO nanomaterials would broad its application in supercapacitors. In this paper, copper oxide is used as an active material and copper foam (CF) is chosen as a substrate to synthesize metal oxide-based electrodes by an in-situ oxidation method. Ingeniously, the availability of copper foam has a dual nature encompassing as a collector as well as a copper source. The as-obtained Cu_xO/CF-60 electrode possesses an area capacitance of 354.6 mF cm⁻² under 2 mA cm⁻². It also has superior cycle stability with 93.8 % of initial capacitance undergo 5000 charge-discharge cycles. Moreover, the all-solid-state asymmetric supercapacitor, combining Cu_xO/CF-60 and activated carbon (AC) pasted on nickel foam (NF) as the respective positive and negative electrodes, exhibits an energy density of 25 μWh cm⁻² when power density reaches 3 mW cm⁻². The Cu_xO/CF-60//AC/NF device displays better cycling stability as 80.2 % of initial capacitance after 5000 cycles. This work provides a simple way for designing Cu_xO based electrodes and lays the foundation for subsequent improvements in electrochemical performance.     

Perovskite oxide and polyazulene–based heterostructure for high–performance supercapacitors

Several types of electrode materials have been developed for high–performance supercapacitors. Most of the relevant studies have focused on the discovery of new atomic structures and paid limited attention to the effect of heterostructures in supercapacitor electrodes, which has long hindered the fundamental understanding of the use of hybrid materials in supercapacitors. In this study, a novel heterostructure based on perovskite oxide (LaNiO₃) nanosheets and polyazulene was synthesized. The as–prepared heterostructure–based supercapacitor exhibited a specific capacitance of up to 464 F g⁻¹ at a high current density of 2 A g⁻¹ in 1–ethyl–3–methylimidazolium tetrafluoroborate. In a symmetric supercapacitor, this heterostructure delivered an energy density of up to 56.4 Wh kg⁻¹ at a power density of 1100 W kg⁻¹. Both LaNiO₃ and polyazulene contributed pseudocapacitance and dominated the performance. Unexpectedly, electric double–layer capacitance was found to contribute in this system. Density functional theory calculations indicated that the advantage of the high electrical conductivity of the heterostructure benefited the supercapacitor operation. Electrochemical quartz crystal microbalance analysis revealed that the fast ion flux and adsorption boosted performance. The high intrinsic electrical conductivity and improved stability make this heterostructure a promising electrode material candidate for supercapacitors.     

Preparation of CuMn2O4/Ti3C2 MXene composite electrodes for supercapacitors with high energy density and study on their charge transfer kinetics

In this study, we present a novel electrode material that combines Ti₃C₂ MXene and high-capacity CuMn₂O₄ to increase the energy density of supercapacitors, which are a popular choice for energy storage due to their high-performance potential. The electrode material was synthesized using the hydrothermal method with varying deposition times (3 h, 6 h and 9 h), and the resulting composite materials were characterized using advanced analytical techniques. The CuMn₂O₄/MXene composite electrode synthesized at 3h exhibited exceptional performance, with a specific capacitance of 628 mF/cm² at 4 mA/cm², due to the enhanced electrical conductivity and charge storage properties of CuMn₂O₄ and MXene sheets. We also uncovered an intricate charge transfer mechanism and storage kinetics of CuMn₂O₄/MXene composite on a nickel foam electrode, revealing a diffusion-controlled energy storage mechanism with fast mass transportation. To demonstrate practicality, we constructed an asymmetric coin cell supercapacitor device using CuMn₂O₄/MXene composite synthesized at 3h and activated carbon as the positive and negative electrodes, respectively. The device showed a specific capacitance of 496 mF/cm² at 6 mA/cm² with cyclic stability of 80% for up to 10,000 cycles, and a power density of 1.5 mW/cm² at a higher energy density of 0.073 mWh/cm². Our results demonstrate the potential to significantly advance the development of high-performance supercapacitors by combining Ti₃C₂ MXene and high-capacity oxides, refining the synthesis process, and exploring innovative electrode architectures.     

Subsize Ti3C2Tx derived from molten-salt synthesized Ti3AlC2 for enhanced capacitive deionization

Ti₃C₂T_x is a promising intercalation-type electrode material for capacitive deionization (CDI). However, Ti₃C₂T_x, obtained from traditional synthesized Ti₃AlC₂, is with large particle size and undersized interlayer space, which can easily lead to the longer ion diffusion path, fewer adsorption sites, and higher ion diffusion barrier in CDI process. In this work, subsize and Na⁺ intercalated Ti₃C₂T_x (Na⁺-Ti₃C₂T_x-MS) was prepared by HF etching KCl-assisted molten-salt synthesized Ti₃AlC₂ and following NaOH treatment. The Na⁺-Ti₃C₂T_x-MS achieves a high electrosorption capacity of 14.8 mg/g and a high charge efficiency of 0.81 at the applied voltage of 1.2 V in 100 mg/L NaCl solution. Besides, the stable desalination performance of Na⁺-Ti₃C₂T_x-MS has been confirmed. The superior performance of Na⁺-Ti₃C₂T_x-MS can be attributed to the subsize particle and larger interlayer space. Both two factors can effectively increase ions adsorption sites, shorten diffusion path lengths, and reduce diffusion barriers in the CDI process.     

Preparation and electrochemical properties of polyaniline/α‐RuCl3.xH2O composites for supercapacitor

Polyaniline/α‐RuCl₃.xH₂O composites were successfully synthesized by an in‐situ chemical polymerization and employed as new electrode materials in supercapacitors. The synthesized composites were characterized physically by scanning electronic microscope (SEM). The electrochemical capacitance performance of these composites was investigated by cyclic voltammetry, galvanostatic charge–discharge tests and AC impedance spectroscopy with a three‐electrode system in 1 mol l⁻¹ NaNO₃ aqueous solution electrolyte. The polyaniline/α‐RuCl₃.xH₂O composites electrodes showed much higher specific capacitance, better power characteristics and were more promising for application in capacitor than pure polyaniline electrode. The effect and role of α‐RuCl₃.xH₂O in the composite electrode were also discussed in detail. POLYM. COMPOS., 34:2142–2147, 2013. © 2013 Society of Plastics Engineers     

Design and synthesis of three-dimensional needle-like CoNi2S4/CNT/graphene nanocomposite with improved electrochemical properties

In this paper, we described a simple two–step method for preparing needle-like CoNi₂S₄/CNT/graphene nanocomposite with robust connection among its ternary components. The prepared CoNi₂S₄/CNT/graphene nanocomposite has been thoroughly characterized by spectroscopic (Fourier-transform infrared spectroscopy, Raman spectroscopy, X-ray photoelectron spectroscopy), X-ray diffraction and thermogravimetric analysis. Microscopy techniques (scanning electron microscopy–energy dispersive spectroscopy and transmission electron microscopy) were employed to probe the morphological structures. The electrochemical properties of the as-prepared 3D architectures were investigated with three and two-electrode systems. In addition to its high specific capacitance (710 F g⁻¹ at 20 A g⁻¹), after charging–discharging for 2000 cycles, the electrode still maintained the capacity retention of about 82%. When used as the active electrode material for supercapacitors, the fabricated CoNi₂S₄–g–CNT nanostructure exhibited excellent specific capacitance and good rate capability, making it a promising candidate for next-generation supercapacitors.     

Ultrathin Ti3C2Tx nanosheets modified separators for lithium–sulphur batteries

Currently, among the various emerging energy storage systems, the lithium–sulphur (Li-S) battery is expected to be one of the next-generation lithium secondary batteries with high efficiency. However, the practical application of Li-S batteries still faces many obstacles. To solve the shuttle effect of lithium polysulphides, ultrathin Ti₃C₂T_x nanosheets were prepared through the in-situ acid etching method and applied to separator modification to suppress the shuttle effect of lithium polysulphides. Ultrathin Ti₃C₂T_x nanosheets with enlarged interlayer spacing accelerated the migration of Li⁺. The abundant termination groups on the surface of Ti₃C₂T_x played the role of the lithium polysulphide capture centre. When the mass loading of separator modification materials was set as 0.025 mg cm⁻², the as-prepared battery exhibited a reversible specific capacity as high as 780 mAh g⁻¹ after 200 cycles at 0.2 C, and the single-cycle capacity decay rate was only 0.09%.     

P-doped MoS2/Ni2P/Ti3C2Tx heterostructures for efficient hydrogen evolution reaction in alkaline media

By combining the advantages of doping to change the electronic structure of molybdenum disulfide (MoS₂), transition metal phosphides, and MXene, we proposed the idea of designing and preparing a new type of composite material, P-doped MoS₂/Ni₂P/Ti₃C₂T_x heterostructures (denoted as P@MNTC), to serve as the hydrogen evolution reaction (HER) catalyst of electrochemical water splitting. The as-prepared P@MNTC heterostructures show a significant HER activity with an overpotential of 120 mV at 10 mA cm^–2 in alkaline electrolyte, with decreasing 105 and 125 mV compared with those of MoS₂ and MXene, respectively. The density functional theory indicates that the P doping and synergy effect of Ti₃C₂T_x can enhance the activation of MoS₂ and thus promote dissociation and absorption of H₂O during HER process. This strategy provides a promising way to develop high-efficiency MoS₂- and Ti₃C₂T_x-based composite catalysts for alkaline HER.     

Improvement of gas sensing property for two-dimensional Ti3C2Tx treated with oxygen plasma by microwave energy excitation

Two-dimensional layered Ti₃C₂T_x MXene was prepared through hydrothermal etching method with LiF and hydrochloric (HCl) acid. Ti₃C₂T_x was further treated with oxygen plasma activated by microwave energy to obtain the activated Ti₃C₂T_x at different temperatures ranging from 350 °C to 550 °C. The gas-sensing properties of raw Ti₃C₂T_x and Ti₃C₂T_x activated with oxygen microwave plasma were tested toward different volatile organic compounds gases. The results indicated that Ti₃C₂T_x activated at 500 °C exhibited excellent gas-sensing properties at room temperature (25 °C) to 100 ppm ethanol with a value of 22.47, which is attributed to the enhancement of the amount of oxygen functional groups and defects on the MXene Ti₃C₂T_x film, and in turn to lead to more oxygen molecules adsorption and desorption reaction in the active defect sites. The enhancement of ethanol-sensing performance demonstrated that the activated Ti₃C₂T_x possess great potential in gas sensing.     

Facile synthesis of Sm2S3 diffused nanoflakes and their pseudocapactive behavior

The Sm₂S₃ thin films with diffused nanoflakes morphology are prepared by an environment-friendly facile chemical synthesis method and used in electrochemical supercapacitors. The structural, elemental and surface morphological characterization are carried out using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FESEM) and wettability techniques. The FESEM images show tree root like distribution of flakes with average flake width of about 80 nm. The film surface is lyophilic with propylene carbonate contact angle of 21°. The supercapacitive measurements are carried out through cyclic voltammetry, galvanostatic charge-discharge and electrochemical impedance spectroscopy (EIS) techniques. The Sm₂S₃ film electrode exhibited a highest specific capacitance (C_s) of 213 Fg⁻¹ at 5 mVs⁻¹ scan rate in LiClO₄-propylene carbonate electrolyte. Asymmetric nature of charge–discharge curves confirmed pseudocapacitive behavior of electrode with energy and power densities of 39.39 Whkg⁻¹ and 4.33 kWkg⁻¹, respectively. An equivalent series resistance of 0.44 Ωcm⁻² indicated negligible ohmic losses in charge storage. An electrochemical stability of 81.47% is retained after 1000 cycles indicating that Sm₂S₃ is a promising candidate for supercapacitor application.