Synthesis and characterization of novel antimicrobial polymers containing pendent triclosan moieties

Novel antimicrobial copolymers were produced by first converting the commodity biocide, triclosan (TCS), to an epoxy-functional derivative, 2-((5-chloro-2-(2,4-dichlorophenoxy)phenoxy) methyl)oxirane (ETCS), and then reacting ETCS with polyethylenimine (PEI). While neither ETCS or PEI showed high antimicrobial activity toward either the Gram-positive bacterium, Staphylococcus epidermidis, or the Gram-negative bacterium, Escherichia coli, some the copolymers showed very high activity toward both bacteria. Antimicrobial activity for these copolymers was found to be highly dependent on both the molecular weight of the PEI utilized and the concentration of pendent groups derived from ETCS. In general, decreasing PEI molecular weight and increasing TCS pendent group concentration increased antimicrobial activity. Surface tension measurements showed that the molecular parameters affecting antimicrobial activity also affected surface activity in a similar fashion. Thus, it was speculated that the mechanism of antimicrobial activity associated with these copolymers involves interaction of the copolymers with the bacterial cell wall. A comparison of the antimicrobial activity of the most effective copolymers to TCS showed that the copolymers were more effective toward E. coli than pure TCS when compared using an equivalent TCS content (i.e. TCS pendent group content for the copolymers). This characteristic coupled with the fact that the TCS-containing copolymers are highly aqueous soluble liquids as opposed to a crystalline solid of limited solubility may afford utility of these copolymers for a variety of applications.     

The synthesis of novel photostable fluorescein-based dyes containing an s-triazine UV absorber and a HALS unit and their acrylonitrile copolymers

Two novel fluorescein-based dyes, containing both a hindered amine radical scavenger and an s-triazine UV absorber as well as a polymerizable allyl function, were designed as multifunctional photostable fluorophores capable of simultaneously fluorescently colouring and photostabilising polymers; their absorbance and fluorescence properties in solution were determined. The compounds were copolymerized with acrylonitrile to yield polyacrylonitriles of intense colour and fluorescence. The influence of the novel compounds on the photostability of the coloured copolymers was compared to that offered by conventional fluorescent dyes that did not contain either a UV absorber or a hindered amine radical scavenger component. Significant photostabilisation was observed, which can be attributed to the synergistic effects of the two stabilizer units.     

Synthesis of novel dyestuffs containing sulphonamido moieties and their application on wool and polyamide fibres

A new series of azo disperse dyestuffs were prepared by the reaction of sulphanilamidodiazonium chloride derivatives with indan-1,3-dione. Application of these dyes on wool and nylon 6.6 gave excellent results. The synthesised compounds show good biological activity towards different microorganisms.     

Synthesis of acid dyes containing polyetheramine moieties and their low‐temperature dyeing properties on wool fiber

To realize the low‐temperature dyeing of wool fibers, the use of auxiliaries and wool modification are common methods. Low‐temperature auxiliaries may cause water‐pollution problems, and wool modification is a costly and uncontrollable process. In this study, new acid dyes, named D1–D3, containing polyetheramine groups were synthesized and applied to wool fiber by conventional and low‐temperature exhaust dyeing procedures. The results indicate that the new acid dyes could interact with wool‐fiber‐like auxiliaries and render a high exhaustion rate to the wool fiber at a dyeing temperature of 80 °C. In comparison with Acid Blue 25, the D1–D3 dyes showed an increased dyeing rate, especially under a dyeing temperature of 80 °C. Despite the bigger relative molecular masses of D1–D3, the exhaustion rates of D1–D3 were still higher, and the times of half‐dyeing were shorter than that of Acid Blue 25. The color differences between the wool fabrics dyed with the four dyes at 80 and 98 °C, respectively, were compared. We found that the color differences of D1–D3 between 80 and 98 °C were smaller than that of Acid Blue 25. The interactions between the dyes and wool fiber were analyzed and manifested by the measurement of the ζ potential of the dyes and wool fiber. The leveling and transfer properties of the D1–D3 dyes were also investigated, and the color differences of the wool fabrics dyed with Acid Blue 25, D1, and D2 were very low at all measured pH values and temperatures. The fastnesses of D1–D3 on wool fabric were almost the same as that of Acid Blue 25. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45793.     

Synthesis of novel heterocyclic polyimides containing trimellitimide acid moieties

4‐Nitrobezoyl chloride (2) was reacted with isoeugenol in chloroform in the presence of triethyl amine and ester (4) was obtained in high yield. Ester (4) was reacted with SnCl₂·2H₂O to give amine‐ester (5), and subsequently was reacted with trimellitic anhydride (6) and novel isoeugenol ester‐imide derivative (7), as a new monomer was obtained in quantitative yield. Compound (7) was characterized by high‐field ¹H–NMR, IR, and elemental analysis and then was used for the preparation of model compound (9) and polymerization reactions. 4‐Phenyl‐1,2,4‐triazoline‐3,5‐dione (PhTD) (8) was allowed to react with compound (7). The reaction is very fast and gives only one double adduct (9) via Diels–Alder and ene pathways in excellent yield. The polymerization reactions of novel monomer (7) with bistriazolinediones [bis(p‐3,5‐dioxo‐1,2,4‐triazolin‐4‐ylphenyl)methane (10) and 1,6‐bis(3,5‐dioxo‐1,2,4‐triazolin‐4‐yl)hexane (11)] were carried out in N,N‐dimethylacetamide (DMAc) at room temperature. The reactions are exothermic, fast, and gave novel heterocyclic polyimides (12) and (13) via repetitive Diels–Alder‐ene polyaddition reactions. Some structural characterization and physical properties of these novel heterocyclic polyimides are reported. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 1716–1725, 2001     

新型受阻胺类光稳定剂N-烯丙基四甲基哌啶醇的合成和表征

在Mg-Al水滑石(Mg-Al LDHs)催化哌啶醇和烯丙基溴反应,合成了一种新型受阻胺类光稳定剂,产物通过IR、MS、元素分析等进行了表征。     

Synthesis of solvatochromic merocyanine dyes and their immobilization to polymers

Solvatochromic merocyanine dyes were immobilized onto polymer surfaces and copolymerized with acrylic resins, yielding novel reversibly solvatochromic polymers, which were used as solvent polarity indicators that exhibited different colors in water and alcohols. To generate solvatochromic polymer for solvent polarity indication, two solvatochromic merocyanine dyes containing moieties, which allow their immobilization onto polymer surfaces, or copolymerization with acrylic and vinyl monomers, were sequentially synthesized in four and six steps. Merocyanine dye (E)‐2‐(2‐(1‐(6‐aminohexyl)pyridinium‐4‐yl)vinyl)‐4,6‐dichlorophenolate (AHPVD) was prepared with a terminal aminohexyl group which allowed covalent bonding to activated carboxylated or sulfonated polymeric materials. The dyes were covalently bonded to the polymer surfaces, such as, nylon, polycarbonate, polyethylene terephthalate, and silicone. Solvatochromic merocyanine dye (E)‐2‐(2‐(1‐(6‐acrylamidohexyl)pyridinium‐4‐yl)vinyl)‐4,6‐dichlorophenolate (AAPVD) was synthesized for radical copolymerization with acrylate and vinyl monomers and oligomers. Side‐chain solvatochromic merocyanine‐containing hydrophilic polymers with differential water and alcohol absorption were obtained upon photoinitiated radical copolymerization with specially formulated acrylated resins. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44451.     

新型间甲基取代杂萘联苯型聚芳酰胺的研制

采用间甲基取代杂萘联苯型类双酚4-(2-甲基-4-羟基苯基)-2,3-二氮杂萘-1-酮与对氯苯腈反应制得二腈化合物,进一步水解为二酸,以此新型二酸与三种二胺聚合制得的三种新型聚芳酰胺均具有较高的耐热性能,其玻璃化转变温度在287～317℃,且易溶于非质子极性溶剂中,聚合物的特性粘数为1.62～1.83 dL/g,拉伸强度为87～98 MPa,断裂伸长率为6.4％～8.4％,拉伸模量为0.7～1.3 GPa,表面电阻系数为10~(14)Ω,体积电阻系数达10~(17)Ω·cm。     

Synthesis of novel bisphenol containing phthalazinone and azomethine moieties and thermal properties of cured diamine/bisphenol/DGEBA polymers

A novel bisphenol(1,2-dihydro-2-(4-((4-hydroxy)phenyliminomethylidene)phenyl)-4-(4-((4-(4-hydroxy)phenyliminomethylidene)phenoxy)phenyl)(2H)phthalazin-1-one, DPP) and a diamine(1,2-dihydro-2-(4-aminophenyl)-4-(4-(4-aminophenoxy)phenyl)(2H)phthalazin-1-one, DAP) were synthesized and characterized. The novel epoxy polymers containing phthalazinone and/or azomethine moieties were prepared by binary polymerization of DAP (or DPP) with diglycidyl ether of biphenyl A (DGEBA) and ternary polymerization of hybrid curing agents, DAP/DPP (DAP and DPP under different molar ratios) with DGEBA. The cure behaviors of these new epoxy systems were studied by dynamic differential scanning calorimeter (DSC) and Infrared (IR) scans. Especially, the activation energy of DAP/DGEBA calculated by Kissinger and Ozawa methods were 73.8 and 77.4 kJ/mol, respectively. For ternary epoxy system, it was found that hybrid curing agents of DAP/DPP exhibited significant associated effect on their reactivity towards the oxirane group. Glass transition temperatures (T_g's) of these new epoxy polymers were all above 150 °C from the results of DSC, and the initial thermal decomposition temperatures (T_d,5%'s) and integral procedure decomposition temperatures (IPDT's) of these new epoxy polymers are above 350 and 850 °C, respectively from results of thermogravimetric analyses (TGA). These results show that new epoxy polymers containing phthalazinone and/or azomethine moieties exhibited excellent thermal properties. Especially, thermal properties of the ternary epoxy polymers could be modified by changing the content of DAP and DPP. The linear relationships between char yield (Y_c,wt%) and the structural compositions of these new polymers (weight percentage of phthalazinone, azomethine and nitrogen, C/H weight ratio) were built.     

Vinyl monomers bearing chromophore moieties and their polymers. VII. Synthesis,photochemical, and initiation behavior of acrylic monomers bearing phenothiazine oxide moieties and their polymers

Four acrylic monomers bearing phenothiazine oxide moieties, that is, N-acryloyl-phenothiazine-5-oxide (APTO), N-acryloyl-2-chlorophenothiazine-5-oxide (ACPTO), N-acryloyl-phenothiazine-5,5-dioxide (APTDO), and N-acryloyl-2-chlorophenothiazine-5,5-dioxide (ACPTDO) were synthesized by oxidation of corresponding N-acryloyl-phenothiazine (APT) and N-acryloyl-2-chlorophenothiazine (ACPT) using sodium perborate as an oxidant. These monomers could easily be polymerized by initiation of AIBN. The emission fluorescence spectra of the monomers and their polymers were recorded, and the results indicated that these 4 new monomers possess a fluorescence structural self-quenching effect (SSQE), as we have reported previously. Moreover, with the change of the electronic structure of sulfur atom in the phenothiazine chromophore, that is, from sulfide to sulfoxide and sulfone groups, the tendency of SSQE of these monomers is in the order of APT > APTO > APTDO. This would be ascribed mainly to the decrease of electron-donating abilities of monomers in a sequence of sulfide, sulfoxide, and sulfone groups; that is, at the sulfur atom of these monomers, APT has 2 lone-pair electrons, APTO has 1 lone-pair electrons, and APTDO completely loses its lone-pair electrons. Based on the exciplex formation, the monomers APTO, APTDO, ACPO, and ACPTDO could act as sensitizers for the photopolymerization of acrylonitrile (AN). The combination of APTO or ACPTO with organic peroxides such as BPO could also initiate the polymerization of vinyl monomers, such as AN, by redox nature. © 1998 John Wiley & Sons, Inc. J. Appl. Polym. Sci. 70: 1191–1199, 1998     

Synthesis and electron donating property of novel porphyrazines containing tetrathiacrown ether-linked tetrathiafulvalene moieties

Novel magnesium and metal-free porphyrazines (4 and 5) containing four peripheral tetrathiacrown ether-linked tetrathiafulvalene moieties have been synthesized and characterized. Their solution electrochemical data showed two reductive and three oxidative processes within a −1500 mV to +1500 mV potential window. UV/Vis spectroscopy and electron paramagnetic resonance (EPR) measurements reveal the formation of a charge-transfer complex between porphyrazine 4 with F₄TCNQ. The single-crystal structure of the TTF-dicyanocrown ether 3 is presented.     

A comparative study on polymers containing different ultraviolet stabilizer moieties

A number of styrene and methylmethacrylate copolymers containing different UV stabilizer units (benzophenone, phenylbenzotriazole, and naphthylbenzotriazole) fixed to the polymer backbone were characterized by UV spectroscopy and size exclusion chromatography. UV spectroscopy was found to be suitable for the determination of the copolymer composition and the stability of intramolecular hydrogen bonds, which are important for the performance of UV stabilizer molecules. The highest stability of the intramolecular hydrogen bond was obtained for phenylbenzotriazole containing polymers. Using size exclusion chromatography with refractive index and ultraviolet detection, it was shown that the UV stabilizer units were statistically distributed along the different molar mass fractions.     

Synthesis of novel photoactive heterocyclic polyimides containing naphthalene moieties via cycloaddition reactions

1‐Naphthylacetic acid (1) was reacted with thionyl chloride and 1‐naphthyl‐ acetyl chloride (2) was obtained in a quantitative yield. The reaction of this acid chloride (2) with isoeugenol (3) was performed in chloroform and a novel isoeugenol ester derivative (4) as a monomer was obtained in a high yield. The compound (4) was characterized by ¹H‐NMR, IR, mass, and elemental analyses and then was used for the preparation of a model compound (6) and polymerization reactions. 4‐Phenyl‐1,2,4‐triazoline‐3,5‐dione (PhTD) (5) was allowed to react with compound (4). The reaction is very fast and gives only one double adduct (6) via Diels–Alder and ene pathways in an excellent yield. The polymerization reactions of the novel monomer (4) with bistriazolinediones [bis‐(p‐3,5‐dioxo‐1,2,4‐triazolin‐4‐ylphenyl)methane (7) and 1,6‐bis‐(3,5‐dioxo‐1,2,4‐triazolin‐4‐yl)hexane] (8) were carried out in N,N‐dimethylacetamide (DMAc) at room temperature. The reactions are exothermic and fast and gave novel heterocyclic polyimides containing a naphthalenic pendant group (9) and (10) via repetitive Diels–Alder‐ene polyaddition reactions. Stereochemical analysis of the model compound and fluorimetric studies of the model compound as well as polymers were done conclusively. Excimer formation of the polymers and its effect on fluorescence emission were investigated and some structural characterization and physical properties of these novel heterocyclic polyimides are reported. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 527–536, 2000     

Synthesis and properties of novel fully conjugated polymers containing bithiazole rings

Two novel fully conjugated polymers containing bithiazole rings (PDDBTz and PDABTz) were first synthesized by polycondensation of 2,7-dimethyl-2,4,6-octatriene-1,8-dial with 2,2′-bis(diethylphosphinatyl methyl)-4,4′-bithizole or 2,2′-diamino-4,4′-bithiazole (DABT). The structure of the polymers was determined by IR, ¹H NMR and elemental analysis. PDDBTz is soluble in trifluoroacetic acid and DMSO, whereas PDABTz is soluble in common solvent such as THF, DMSO, DMF. Bithiazole rings were introduced to provide bidentate N-donor sites for binding metal ions. Their lanthanide metal complexes were prepared. The magnetic behavior of these polymeric complexes was measured as a function of magnetic field strength (0-60 kOe) at 4 K and as a function of temperature (4-300 K) at magnetic field strength of 30 kOe. The results show that they all exhibit features of soft ferromagnet.     

Synthesis of novel photochromic spiropyran dyes containing quaternary ammonium salt or cinnamoyl moiety and their properties as photoinitiators

Three novel spiropyran (SP) dyes containing quaternary ammonium salt or cinnamoyl moiety were synthesized and their photosensitive properties as photoinitiator were characterized by UV–vis spectroscopy. The intramolecular electron transfer of SP dyes containing quaternary ammonium salt was much faster and can initiate the photopolymerization under UV irradiation though the photochromic properties than those of SPs containing cinnamoyl group. A photoinitiation system containing SPs and the hexaarylbisimidazoles was studies, and the initiation properties were tested by monitoring the conversion rate of double‐bond at 810 and 1640 cm^?1 with ‐time infrared spectroscopy. It was found that the system containing our SP derivatives exhibited much higher initiating efficiency than ever reported SP dyes in the photopolymerization of 2‐phenoxyethylacrylate/N‐vinylcarbazole. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Liquid crystalline polymers containing mesogenic units based on half-disc and rod-like moieties

Summary Oligo(methylacrylate)s with ester end-group are transesterified by allyl alcohol in the presence of lipozyme as catalyst. The transesterification is regioselective: only end-group is modified. The structure of the modified oligomers is studied by ¹³C NMR spectroscopy.     

Synthesis and properties of novel poly(benzimidazopyrrolone amide)s containing pyridine moieties

A series of new poly(benzimidazopyrrolone amide) (PPA) copolymers were synthesized by a two‐step procedure, which was the solution polycondensation of a novel pyridine‐containing tetraamine with various aromatic dianhydrides at a room temperature and cyclization of the resulting prepolymers at a high temperature, respectively. The resulting prepolymers from the solution polycondensation, that is, poly(amide amino acid)s (PAAAs), had inherent viscosities of 0.82–0.91 dL/g; then, tough and flexible PPA films could be successfully prepared by the casting of the PAAA solutions onto a glass substrate followed by thermal curing with a program temperature procedure up to 350°C. The obtained PPA films exhibited not only excellent thermal properties with onset decomposition temperatures in the range 502–521°C, glass‐transition temperatures in the range 299–337°C, and residual weight retentions at 700°C in air of 29.1–34.8% but also good mechanical properties with tensile strengths of 102.1–115.9 MPa and elongations at break of 6.8–7.4%. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

新型多维取代吡啶内盐有机染料的合成及其光谱性能和电化学性质初探

以吡啶内盐为电子受体,通过Knoevenagel缩合反应连接不同取代数目、不同结构的电子给体,合成了系列新型的多维取代吡啶内盐有机染料,利用NMR、HRMS等对其结构进行了表征.初步考察了该类染料的光谱性能和电化学性质,结果表明,三取代吡啶内盐摩尔消光系数显著高于单取代和二取代化合物,并具有较宽的吸收谱带,而三苯胺给电子基团三取代的吡啶内盐表现出优异的电化学性能.     

Liquid crystalline polymers containing mesogenic units based on half-disc and rod-like moieties

Part 1: V. Percec and J. Heck: J. Polym. Sci. Polym. Lett., submitted     

Liquid crystalline polymers containing mesogenic units based on half-disc and rod-like moieties

Summary The synthesis and characterization of the hemiphasmidic monomers 4-{3,4,5-tri-[S(-)-2-methylbutan-1-yloxy] benzoate}-4'-(10-undecenoate)biphenyl (13), 4-[3,4,5-tri-(n-pentan-1-yloxy) benzoate]-4'-(10-undecenoate)biphenyl (14), 4-[3,4,5-tri-(n-dodecan-1-yloxy) benzoate]-4'-(10-undecenoate)biphenyl (15), 4-[3,4,5-tri-(n-dodecan-1-yloxy) benzoate]-4'-(10-undecen-1-yloxy)biphenyl (16) and of the polymethylsiloxanes derived from them (i.e. 17, 18, 19, and 20) are described. Monomers 13 to 16 are only crystalline. Polymer 17 is crystalline, 18 displays an unidentified mesophase, while 19, and 20 exhibit enantiotropic, most probably hexagonal columnar phasmidic mesophases.