A compact broadband coplanar waveguide fed circularly polarized printed monopole antenna with asymmetric modified ground plane

In this communication, a broadband circularly polarized (CP) monopole antenna with coplanar waveguide (CPW) feeding is proposed. It consists of a modified rectangular monopole, an asymmetric ground plane, a two‐linked inverted L‐shaped strips on the left CPW ground, and two rectangular horizontal slots in asymmetric CPW ground plane. The overall dimension is only 0.47λ _o × 0.47λ _o. The antenna prototype has been fabricated. The measured results indicate that a broad ?10 dB impedance bandwidth (IBW) of 107.5% (4.3 GHz, 1.85‐6.15 GHz) and a broad 3 dB axial ratio ARBW of 104.3% (4 GHz, 1.855‐5.9 GHz) can be achieved; the average realized gain is 2.3 dBi for the entire CP band. The proposed antenna is an attractive candidate for several wireless communication systems.     

Bandwidth enhancement of a circularly polarized tapered crossed slot antenna with corner parasitic directors

This paper presents a single‐feed wideband circularly polarized (CP) antenna with tapered crossed slots and corner directors. According to the multi‐mode resonance concept, the antenna uses two identical cross placed Vivaldi‐like tapered slots as the wideband radiating elements, and four rectangular parasitic patch directors are connected on each corner of the ground for further enhancing the bandwidth. A simple second‐order stepped microstrip line with a via on the other side of the substrate is used to feed the antenna. Two pairs of capacitors and inductors are placed on each slot to realize a 90° phase difference for CP operation. The proposed antenna is designed, fabricated and measured. Simulation results are in good agreement with the measured results that demonstrate a 10 dB impedance bandwidth (IMBW) from 1.98 to 5.71 GHz (3.73 GHz, 97.01%) and a 3 dB axial ratio bandwidth (ARBW) from 2.13 to 3.91 GHz (1.78 GHz, 58.94%). The antenna outperforms most of the reported cross slot antennas for its wide IMBW and ARBW.     

New broadband circularly polarized antenna with an inverted F‐shaped feedline

In this article, we present a new broadband CP square‐slot antenna with an inverted F‐shaped feed‐line. The antenna is composed of an inverted F‐shaped feed‐line, pairs of isosceles triangular chamfers, I‐shaped slots, rectangular slots and triangular patches, and a Z‐shaped strip. By introducing these strips and slots into the square‐slot, multiple CP modes can be stimulated simultaneously, which eventually enhances 3‐dB ARBW and 10‐dB impedance bandwidth (IBW) of the presented antenna. The measured results show that its IBW (|S₁₁| < ?10 dB) is about 7.2 GHz (87.8% from 4.6 to 11.8 GHz) and its ARBW (AR < 3 dB) is 8.3 GHz (96% from 4.5 to 12.8 GHz).     

A new broadband circularly polarized square‐slot antenna with low axial ratios

A new broadband circularly polarized (CP) square‐slot antenna with low axial ratios is proposed in this article. The antenna is comprised of an L‐shaped microstrip line with tapered section and a square‐slot ground plane with some stubs and slots, which are utilized as perturbations for the desirable antenna performance. By loading stubs and slots in the square‐slot ground plane, the 2‐dB axial ratio bandwidth (ARBW) and 10‐dB return loss bandwidth for the presented antenna can be markedly improved. The measured results show that its 2‐dB ARBW is 4.2 GHz (54.2% from 5.65 GHz to 9.85 GHz) and its 10‐dB return loss bandwidth is about 8.9 GHz (92.7% from 5.15 GHz to 14.05 GHz). The proposed antenna features compact structure and broad 2‐AR bandwidth which could completely cover the WLAN (5.725‐5.85 GHz) band. Therefore, the proposed antenna is suitable for circular polarization applications in C band.     

A high‐gain compact circularly polarized microstrip array antenna with simplified feed network

A broadband high‐gain circularly polarized (CP) microstrip antenna operating in X band is proposed. The circular polarization property is achieved by rotating four narrow band linearly polarized (LP) microstrip patch elements in sequence. Since the conventional series‐parallel feed network is not conducive to the miniaturization of the array, a corresponding simplified feed network is designed to realize the four‐way equal power division and sequential 90° phase shift. With this feed network, the impedance bandwidth (IBW) of the CP array is greatly improved compared with that of the LP element, while maintaining a miniaturized size. Then, parasitic patches are introduced to enhance the axial ratio bandwidth (ARBW). A prototype of this antenna is fabricated and tested. The size of proposed antenna is 0.93λ₀ × 0.93λ₀ × 0.017λ₀ (λ₀ denotes the space wavelength corresponding to the center frequency 10.4 GHz). The measured 10‐dB IBW and 3‐dB ARBW are 13.6% (9.8‐11.23 GHz), 11.2% (9.9‐11.07 GHz) respectively, and peak gain in the overlapping band is 9.8 dBi.     

Compact microstrip antennas with very wide ARBW and triple circularly polarized bands

This article presents two compact circularly polarized microstrip antennas with a very wide 3 dB axial ratio bandwidth and triple circularly polarized bands. A hexagonal stub (circular polarization element) along with tuning element in the ground plane is used for achieving wide 3 dB ARBW in antenna‐1, while a novel approach of using a parasitic strip around the circular polarization element is used in antenna‐2 for introducing band elimination notches in the circularly polarized band of antenna‐1. The antenna‐1 has a ?10 dB impedance bandwidth of 12.34% (3.8‐4.3 GHz), 84.02% (4.9‐12 GHz), and 3 dB ARBW of 79.94% (4.9‐10.9 GHz). The antenna‐2 displays circularly polarized band elimination notch characteristics with ?10 dB impedance bandwidth of 24.80% (3.85‐4.94 GHz), 31.72% (6.1‐8.4 GHz), 25.35% (9.3‐12 GHz), and 3 dB ARBW of 4.84% (4.63‐4.86 GHz), 19.08% (6.02‐7.29 GHz), and 5.7% (9.54‐10.1 GHz). Both the antennas are designed and fabricated on FR4 substrate of dimension (0.52 × 0.52 × 0.04)λ₀ at a frequency of 7.9 GHz.     

A wideband circularly polarized crossed magneto‐electric dipole

A novel wideband crossed magneto‐electric (ME) dipole for circularly polarized (CP) radiation is proposed in this paper. The proposed antenna consists of a crossed dipole, four parasitic elements, and two pairs of folding metal plates (magnetic dipole). The parasitic elements and magnetic dipole are employed to enhance the axial ratio bandwidth (ARBW). The antenna size is 0.51λ₀ × 0.51λ₀ × 0.33λ₀, where λ₀ is the corresponding free‐space wavelength at the center frequency. A prototype antenna is fabricated and tested. The experiment results depict that the impedance bandwidth (IBW) for voltage standing wave ratio < 2 is 79.2% (2.5‐5.78 GHz) and the 3‐dB axial ratio bandwidth (ARBW) is 72.5% (2.7‐5.77 GHz). At the same time, good CP characteristics and stable symmetrical radiation patterns can be obtained across the operation bandwidth.     

A compact widebeam circularly polarized antenna with wide impedance and axial ratio bandwidths

A compact widebeam circularly polarized antenna with wide impedance and axial ratio (AR) bandwidths is proposed in this study. The antenna is composed of a pair of crossed dipoles, four sequentially rotated parasitic elements, a slotted ground plane with four vertical plates, and four inverted L‐shaped structures. A prototype is fabricated and measured. An impedance bandwidth (S11 < ?10 dB) of 102.4% and a 3‐dB AR bandwidth of 83.5% are measured. And half‐power beamwidth is more than 120° over the whole operating band. Radiation patterns are symmetrical and identical in both principal planes. The compact size of antenna is 0.42λ₀ × 0.42λ₀ × 0.16λ₀.     

Coplanar waveguide‐fed electrically small dual‐polarized short‐ended zeroth‐order resonating antenna using Ω‐shaped capacitor and single‐split ring resonator for GPS/WiMAX/WLAN/C‐band applications

This work explains the design and analysis of a triple‐band electrically small (ka = 0.56 < 1) zeroth‐order resonating (ZOR) antenna with wideband circular polarization (CP) characteristics. The antenna compactness is obtained due to ZOR frequency of composite right/left‐handed (CRLH) transmission line (TL) and wideband CP radiation are achieved due to the introduction of single‐split ring resonator and asymmetric coplanar waveguide fed ground plane. The proposed antenna obtains an overall electrical size including the ground plane of 0.124 λ₀ × 0.131 λ₀ × 0.005 λ₀ at 1.58 GHz and physical dimension of 23.7 × 25 × 1 mm³ are achieved. The antenna provides a size reduction of 44.95% compared to a conventional monopole antenna. The novelty behind the ohm‐shaped capacitor is the generation of extra miniaturization with better antenna compactness. The antenna provides dual‐polarized radiation pattern with linear polarization radiation at 1.58 and 3.54 GHz, wideband CP radiation at 5.8 GHz. The antenna measured results shows good impedance bandwidth of 5%, 6.21%, and 57.5% for the three bands centered at 1.58, 3.54, and 5.8 GHz with a wider axial ratio bandwidth (ARBW) of 25.47% is obtained in the third band. The antenna provides a higher level of compactness, wider ARBW, good radiation efficiency, and wider S₁₁ bandwidth. Hence, the proposed antenna is suitable for use in GPS L1 band (1.565‐1.585 GHz), WiMAX 3.5 GHz (3.4‐3.8 GHz) GHz, WLAN 5.2/5.8 GHz (5.15‐5.825 GHz), and C‐band (4‐8 GHz) wireless application systems.     

A compact double‐layer wideband circularly polarized microstrip antenna with parasitic elements

In this article, a new broadband circularly polarized (CP) microstrip patch antenna (MPA) with a sequential phase (SP) square‐loop feeding structure is proposed. The presented antenna is composed of a square‐loop feeding structure, four L‐shaped parasitic patches with L‐shaped slots, four parasitic square patches, and a corner‐truncated square patch. At first, a SP square‐loop is designed as a feeding structure. Then, four L‐shaped parasitic patches with L‐shaped slots are utilized to generate one CP mode by a capacitive coupled way. At last, four parasitic square patches and a corner‐truncated square patch are together placed above the SP feeding structure to broaden the circularly polarized bandwidth (CPBW). The presented antenna has a wide 3‐dB axial ratio bandwidth (ARBW) of 16.7% (5.4 GHz, 4.95‐5.85 GHz), and a wide 10‐dB return loss bandwidth of 25.5% (5.5 GHz, 4.8‐6.2 GHz). The proposed antenna features compact structure and broad 3‐AR bandwidth which could completely cover the WLAN (5.725‐5.85GHz) band. Therefore, the proposed antenna is suitable for circular polarization applications in C band.     

Broadband compact CPW‐fed metasurface antenna for SAR‐based portable imaging system

A broadband and compact coplanar waveguide (CPW) coupled‐fed metasurface (MS)‐based antenna for C‐band synthetic aperture radar (SAR) imaging application is proposed in this article, which is consisted of 16 uniform periodic square patches performed as radiators. The CPW feeding structure gives two following functions: (1) It excites an aperture coupling slot structure underneath the center of MS patch array. (2) It acts as a ground plane for the metasurface patch units. Different slots were investigated and eventually an hourglass‐shaped slot is applied to enhance bandwidth for imaging applications. A prototype with a dimension of 60 × 60 × 1.524 mm³ (1.1λ₀ × 1.1λ₀ × 0.03λ₀) operating at the center frequency 5.5 GHz (f₀) has been fabricated and measured to verify the design principle. This antenna has a measured impedance bandwidth of 12.4% from 5.14 to 5.82 GHz, a peak gain of 9.2 dBi and averaged gain of 7.2 dBi at broadside radiation. Microwave imaging experiments using the proposed antenna have been carried out and a good performance is achieved.     

Epsilon‐shaped circularly polarized strip and slot‐loaded ultra‐wideband antenna for Ku‐band and K‐band

A compact epsilon‐shaped (ε) ultra‐wideband (UWB) antenna for dual‐wideband circularly polarized (CP) applications has been investigated in this article. It consists of a stepped stub loaded modified annular ring‐shaped radiator and modified CPW ground plane. The ground plane is loaded with two semicircular notches and a spiral‐shaped slot. The impedance bandwidth (IBW) is 97.02% (10.4‐30 GHz) along with an overall footprint of 20 × 20 mm². The fractional axial ratio bandwidth (3‐dB ARBW) for two wide bands is 38.50% (13.30‐19.64 GHz) and 6.45% (26.25‐28.00 GHz), respectively. The proposed antenna is left‐hand circularly polarized with a peak gain of about 5.09 and 5.14 dB in both 3‐dB ARBW bands. The proposed antenna is dominating other reported CP antenna structures in terms of number of CP bands, 3‐dB ARBW, IBW, peak gain, and dimensions.     

Circularly polarized planar monopole antenna for ultrawideband applications

A broadband circularly polarized (CP) planar monopole antenna is proposed here for ultrawideband (UWB) communication. The antenna is composed of a modified annular ring patch fed by a tapered microstrip line and a rectangular semiground plane on the opposite side of the substrate. Capability of generating wide axial ratio bandwidth (ARBW) is another feature of the proposed antenna. Wide ARBW is achieved by introducing a rectangular slot and a stub in the ground plane. The CP antenna has an impressive ARBW of 5.52 GHz (81.42%, 4.02‐9.54 GHz) within the UWB frequency range (3.1‐10.6 GHz). Measured 10‐dB return loss bandwidth of the proposed antenna is 120.86% centered at 7.48 GHz (2.96‐12 GHz). The proposed antenna is well used for wireless local area network (5.2 and 5.8 GHz), Worldwide Interoperability for Microwave Access (5.5 GHz), and other wireless systems in C band as well as CP‐UWB antenna communication.     

Wideband cavity‐backed log‐periodic‐slot end‐fire antenna with vertical polarization for conformal application

A 6–18 GHz wideband cavity‐backed log‐periodic‐slot end‐fire antenna with vertical polarization for conformal application is presented. The log‐periodic folded slots and parasitic slots with 10 slot elements are applied to cover 6–18 GHz frequency band and the log‐periodic metallic cavity is placed under each slot element to keep wideband performance and prevent the effects of large metallic carrier on radiation patterns. The ground plane etched with log‐periodic slots is reversed and touched directly to the backed cavity and a dielectric cover is added to the antenna, to further improve the antenna performance. Meanwhile, a broadband microstrip‐coplanar waveguide transition is inserted in the antenna for measurements. With these designs, the proposed antenna shows good impedance matching (|S₁₁|<27 dB) and end‐fire gain (>4 dBi) performances in 6–18 GHz. The proposed antenna also keeps low‐profile and easy flush‐mounted characteristic which is suitable for conformal applications of high speed moving carriers.     

Dual‐band dual‐polarized compact planar monopole antenna for wide axial ratio bandwidth application

In this article, a geometrically simple, microstrip line‐fed planar monopole structure with slanting edge ground plane is designed to realize the dual‐band dual‐polarized operation. The proposed antenna consists of a rotated U‐shaped patch and an electromagnetically coupled L‐shaped parasitic radiating element. Owing to the combination of microstrip line‐fed radiating patch and a slanting‐edge rectangular ground plane on the opposite side of the substrate, the proposed dual‐band antenna can generate broad axial ratio bandwidth (ARBW) in the upper frequency band. The overall dimension of the prototype is only 32 × 32 × 1.6 mm³. The measured results validate that the proposed antenna has two operational frequency bands, 29.84% (1.54‐2.08 GHz) for linearly polarized radiation and 71.85% (3.96‐8.4 GHz) for circularly polarized radiation. Measured result shows that 3‐dB ARBW of the proposed antenna is 73.54% (3.80‐8.22 GHz) in the higher frequency band. It shows that the higher frequency band exhibits a left‐hand circularly polarized radiation in the boresight direction.     

Wideband asymmetric microstrip‐fed circularly polarized antenna with monofilar spiral stub for WLAN application

A wideband circularly polarized printed antenna is proposed and fabricated, which employs monofilar spiral stubs and a slit in the asymmetrical ground plane which are fed by an inverted L‐shaped microstrip feedline. The CP operation is realized by embedding an inverted‐L shaped strip and modified ground plane and can be markedly improved by loading monofilar spiral stubs asymmetrically connected at the edge of the ground plane. After optimization, the measured results of the finally structure demonstrate that a 10‐dB bandwidth of 67.6% from 4.6 to 9.3 GHz and a 3‐dB axial‐ratio bandwidth (ARBW) for circular polarization (CP) of 60.1% from 5 to 9.3 GHz could be achieved which could completely cover the WLAN (5.725‐5.85 GHz) band. Therefore, the proposed antenna is suitable for circular polarization applications in C band. To explain the mechanism of broadband circular polarization operation, the analysis of magnetic fields distributions and a parametric study of the design are given. Compared to other recent works, a simpler structure, wider axial ratio and impedance bandwidths and a more compact size are the key features of the proposed antenna.     

A wideband compact horizontally polarized omnidirectional antenna for 2G/3G/LTE

A compact horizontally polarized omnidirectional slot antenna with a wide working band is presented in this article. The proposed antenna consists of 4 shorter driven cross‐shaped slots, 4 longer parasitic cross‐shaped slots, and a feeding network. Four shorter slots, placed on the same side of a circular substrate, are fed by a feeding network printed on the other side with uniform phase and magnitude. To enhance the bandwidth of the antenna, 4 longer cross‐shaped slots are inserted between adjacent longer slots to produce an additional resonant frequency. All 8 slot radiators placed symmetrically along the circumference results in an omnidirectional horizontal polarized radiation pattern. By utilizing cross‐shaped slots, a compact size of 0.53λ_L × 0.53λ_L × 0.005λ_L (λ_L is the free space wavelength at the lowest operational frequency) is achieved. The prototype of the proposed antenna is fabricated and measured. The measured results reasonably agree with the simulated results. The measured working band for |S₁₁|<–10dB is from 1.62 to 2.81 GHz which successfully covers the 1.7 to 2.7 GHz 2G/3G/LTE bands. The measured gain variation in azimuthal angle is <1.7 dB within 1.7 to 2.7 GHz, and the cross polarization level is <–27 dB in the horizontal plane.     

Single‐fed broadband circularly polarized unidirectional antenna using folded plate with parasitic patch for universal UHF RFID readers

This research proposes a simple economical broadband circularly polarized antenna for universal ultra‐high frequency (UHF) RF identification (RFID) readers. The antenna utilizes a folded plate, a two‐corner truncated parasitic patch, and a ground plane. The folded plate, which is fabricated from one single plate, consists of a two‐corner truncated main patch, a wall patch, and a feed line, where the main patch is perpendicular to the wall patch, which is in turn perpendicular to the feed line. The folded plate enables currents to flow with a phase difference. The simulation results achieved an |S₁₁| < ?15 dB of 805–966 MHz (18% bandwidth), a 3‐dB axial ratio (AR) bandwidth of 834–962 MHz (14% AR bandwidth), and a gain higher than 8.6 dBic. The measured results obtained an |S₁₁| < ?15 dB of 806–970 MHz (18%), a 3‐dB AR bandwidth of 816–963 MHz (16%), and a gain greater than 7.8 dBic. The proposed antenna is applicable for universal UHF RFID readers as it covers the entire operating UHF RFID frequency range of 840–960 MHz. The parametric study and evolution of the proposed antenna are detailed in this research paper as well. © 2016 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:575–587, 2016.     

Compact broadband circularly polarized slot‐patch antenna array

A simple design of circularly polarized slot‐patch antenna array with broadband operation and compact size is presented in this article. The antenna element consists of a circular slot and a semicircular patch, which are etched on both sides of a substrate. For the gain and axial ratio (AR) bandwidth enhancement, its array antennas are implemented in a 2 × 2 arrangement and fed by a sequential‐phase feeding network. The final 2 × 2 antenna array prototype with compact lateral dimension of 0.8λ_L × 0.8λ_L (λ_L is the lowest frequency within AR bandwidth) yielded a measured impedance bandwidth of 103.83% (2.76‐8.72 GHz) and a measured AR bandwidth of 94.62% (2.45‐6.85 GHz). The peak gain values within the AR bandwidth are from 2.85 to 8.71 dBi. A good agreement between the simulated and measured results is achieved. This antenna array is suitable for multiservice wireless systems covering WiMAX, WLAN and C‐band applications such as satellite communications.     

Design of a compact dense dielectric patch antenna based on half‐cut technique

In this article, a half‐cut rectangular dense dielectric patch (DDP) with one grounded side plane is theoretically investigated for designing a compact low‐profile antenna. According to the properties and the E‐field distribution of the dominant TM₁₀₁ mode, the half‐wavelength (λ/2) DDP can be bisected by effectively shorting the center plane to the ground, resulting in a miniaturized half‐cut λ/4 DDP. The size of the DDP is effectively reduced by 50% while maintaining the original resonant frequency of the dominant TM₁₀₁ mode. The half‐cut λ/4 DDP can be well excited through aperture coupling for antenna design. The design procedure of the proposed antenna is given in detail. For demonstration, an antenna prototype centered at 4.15 GHz is implemented and measured. The simulated and measured results are given, showing good agreement.