Novel super fast response vertical alignment‐liquid crystal display with extremely wide temperature range

We have developed a novel super fast response (SFR) thin‐film transistor liquid crystal display (TFT‐LCD) with an extremely wide temperature range. Nematic liquid crystal molecules with positive dielectric anisotropy are vertically aligned initially. Any gray‐to‐gray response is forcibly controlled by applying an electric field. Response times of the SFR TFT‐LCD are over several times shorter than those of conventional LCDs such as vertical alignment or in‐plane switching LCDs.     

Transflective twisted‐nematic liquid‐crystal display with double twisted‐nematic cell and twisted liquid‐crystal retarder

Abstract— Two configurations, (i) a double‐cell‐gap twisted nematic (DTN) liquid‐crystal display (LCD) and (ii) a single‐cell‐gap twisted‐nematic (TN) liquid‐crystal display (LCD) using a twisted LC retarder, were optimized for transflective liquid‐crystal displays. For the DTN configuration, both the single‐cell‐gap approach and the double‐cell‐gap approach were considered. The optimized configurations exhibit a high contrast ratio, wide viewing angles, and achromatic (black/white) switching in both the transmissive and reflective modes. They are easy to fabricate and also possess a perfect dark state. Both are suitable for high‐quality transflective TFT‐LCDs.     

A 15‐in. XGA thresholdless antiferroelectric LCD addressed by TFTs and using the quasi‐dc driving method

Abstract— A 15‐in. TFT‐LCD with XGA resolution using thresholdless antiferroelectric liquid crystal (TLAF) has been developed. TLAF materials show V‐shaped switching and enable display of analog gray scale, wide viewing angle, and fast response. However, in the case that high‐resolution TFT‐LCDs using materials with large spontaneous polarization such as TLAF were driven by the conventional method, alternating current (ac) driving, the obtained contrast ratio was limited because of a sharp decline of holding voltage due to the growth of a depolarization field. In order to enhance the contrast ratio, a novel driving method referred to as quasi‐dc driving was proposed. In the quasi‐dc driving, the polarity of the applied voltage to liquid crystals inverts at certain intervals of several seconds. Moreover, the applied voltage and the charging time at the time of polarity inversion are increased more than the intended signals. By this method, the 15‐in. TFT‐LCD using TLAF with high contrast ratio (more than 100:1) and wide viewing angle was realized.     

Electrical models of TFT‐LCD panels for circuit simulations

Abstract— As thin‐film‐transistor liquid‐crystal‐display (TFT‐LCD) panels become larger and provide higher resolution, the propagation delay of the row and column lines, the voltage modulation of Vcom, and the response time of the liquid crystal affect the display images now more than in the past. It is more important to understand the electrical characteristics of TFT‐LCD panels these days. There are several commercial products that simulate the electrical and optical performance of TFT‐LCDs. Most of the simulators are made for panel designers. However, this research is for circuit, system, and panel designers. It is made in a SPICE and Cadence environment as a commercial circuit‐design tool. For circuit and system designers, it will help to design the circuit around a new driving method. Also, it can be easily modified for every situation. It also gives panel designers design concepts. This paper describes the electrical model of a 15‐in. XGA (1024 × 768) TFT‐LCD panel. The parasitic resistance and capacitance of the panel are obtained by 3‐D simulation of a subpixel. The accuracy of these data is verified by the measured values of an actual panel. The developed panel simulation platform, the equivalent circuit of a 1 5‐in. XGA panel, is simulated by HSPICE. The results of simulation are compared with those of experiment, according to changing the width of the OE signal. The proposed simulation platform for modeling TFT‐LCD panels can be especially applied to large‐sized LCD TVs. It can help panel and circuit designers to verify their ideas without making actual panels and circuits.     

Ultra‐low‐power LTPS TFT‐LCD technology using a multi‐bit pixel memory circuit

Abstract— Two types of low‐temperature poly‐Si TFT LCDs, which integrate a multi‐bit memory circuit and a liquid‐crystal driver within a pixel, have been developed using two different TFT process technologies. Both a 1.3‐in. 116‐ppi LCD having a 2‐bit pixel memory and a 1.5‐in. 130‐ppi LCD having a 5‐bit pixel memory consume very little power, less than 100 μW, which indicates that this technology is promising for mobile displays.     

Fast‐response study of polymer‐stabilized VA‐LCD

Abstract— Polymer stabilization is introduced in VA‐type LCDs, and fast response time can be achieved along with a high contrast ratio.¹ A small amount of reactive monomer is mixed with liquid crystal and forms a polymer layer above the alignment layer by using a UV process. The pre‐tilt angle of the liquid crystal is stabilized, and a faster response time can be realized when the bias pre‐tilt angle from 90° is increased. The properties of reactive monomers and liquid crystal and the conditions of the UV process were studied. Based on the application of the proper monomer and LC, and an optima UV process, a 65‐in. 240‐Hz full‐HD TFT‐LCD, with a faster response time and high contrast ratio, has been developed.     

Effects of carbon‐nanotube doping on the performance of a TN‐LCD

Abstract— The electro‐optical characteristics of a 90° twisted‐nematic liquid‐crystal display (TN‐LCD) were analyzed. The test cell was composed of a minute amount of dopant, multiwalled carbon nanotubes, and a standard nematic mixture, E7, used in TN‐LCDs with direct addressing. Under the experimental conditions, no hystereses in optical transmittance were observed in either the doped cell or a neat counterpart under an applied ac voltage. Experimental results show that doping with nanotubes rectifies the electro‐optical properties of the cells by reducing the driving voltage as well as the rise time. Similar results were found in a TN cell of a TFT‐grade liquid crystal instead of the mixture consisting completely of polar compounds.     

A novel approach to LCD optimization

Abstract— A novel approach to optimization liquid‐crystal displays (LCDs) is presented. The optimization module allows for a prediction with a high accuracy for the best results, which can be obtained for one or the other configuration of the polarizers and phase retarders in various electro‐optical modes, if the LC parameters and the operating voltages are fixed. The module is a part of our program, MOUSE‐LCD, which is efficient software for LCD optimization and modeling.     

Photoalignment of LCoS LCDs

Because the pixel area of liquid‐crystal‐on‐silicon (LCoS) microdisplays is about 100 times smaller than that of direct‐view liquid‐crystal displays (LCDs), the limitations of the conventional alignment by brushing are obvious: Scratches and particle contamination caused by brushing become visible due to the strong optical magnification required for LCoS LCDs both in front or rear projection. As an alternative, photoalignment with the linear photo‐polymerization (LPP) technology avoids the generation of defects, thus increasing production yields considerably. For application in LCoS LCDs, alignment layer materials must match the high‐voltage holding ratio (VHR) specifications of TFT‐LCDs. The VHR performance of the newly developed second‐generation LPP materials is shown to be similar to standard TFT polyimides used for conventional brushed alignment. We report investigations of pretilt‐angle generation by photoalignment on reflective CMOS substrates. UV light reflected from the CMOS surface during LPP exposure affects the resulting pretilt angle. Compared to pretilt angles on transmissive substrates, the reflected UV light can induce lower, higher, or identical pretilt angles, depending on LPP material properties. In any case, the pretilt angles are well defined, which results in perfect LCD alignment.     

Novel mobile TFT‐LCDs based on SLS technology

Abstract— Single‐crystal‐like silicon (SLS) technology is the most cost‐effective laser‐crystallization process ever invented. The throughput of the SLS process is about two times higher than that of the conventional excimer‐laser annealing (ELA) method. In addition, the performance of the TFTs fabricated by the SLS process is among the best utilized in mass production. Various TFT‐LCDs employing SLS technology, which included a 1.02‐in. full SOG LCD using an icon display for the sub‐display of cellular phones, a 1.9‐in. qVGA TFT‐LCD with a low‐power analog interface employing a low‐voltage driving scheme, and a 3.0‐in. VGA TFT‐LCD compatible with the 480i data format without additional signal processing were developed. Because the SLS process enables us to achieve highly uniform and reliable transistors, it can be effectively utilized in the mass production of mobile TFT‐LCDs with low power consumption and enhanced image quality.     

Masking model for accurate colorimetric characterization of LCD

Abstract— A color management system (CMS) such as ICC profile or sRGB space have been proposed for color transformation and reproduction of cross media. In such a CMS, accurate colorimetric characterization of a display device plays a critical role in achieving device‐independent color reproduction. In the case of a CRT, colorimetric characterization based on a GOG model is accurate enough for this purpose. However, there is no effective counterpart in liquid‐crystal displays (LCDs) since the characterization of an LCD has many difficulties, such as channel interaction and non‐constancy of channel chromaticity. In this paper, a new method of display characterization is proposed which is applicable to the assessment of color reproduction of LCDs. The proposed method characterizes an electro‐optical transfer function considering both channel interaction and non‐constancy of channel chromaticity. Experimental results show that the proposed method is very effective in the colorimetry of LCDs.     

Advanced liquid‐crystal materials for TFT monitor and TV applications

Notebook applications have been one of the most important driving forces behind the remarkable growth of liquid‐crystal displays (LCDs). LCDs have recently been well accepted in the monitor market and large growth is forecasted because of the replacement of CRTs. The next challenge for LCDs is the TV market. These new application areas are supported by advanced LC technologies such as film‐compensated twisted nematic (TN), in‐plane switching (IPS), and vertically aligned (VA) modes. Each TFT technology requires a corresponding LC material improvement. We will review the recent liquid‐crystal material development for these advanced LC technologies.     

Energy‐efficient liquid‐crystal displays (e2‐LCDs) using a photonic‐crystal backlight system

Abstract— Cholesteric liquid crystals automatically form one‐dimensional photonic crystals. For a photonic crystal in which light‐emitting moieties are embedded, unique properties such as microcavity effects and simultaneous light emission and light reflection can be expected. Three primary‐color photonic‐crystal films were prepared based on cholesteric liquid crystal in which fluorescent dye is incorporated. Microcavity effects, i.e., emission enhancement and spectrum narrowing, were observed. Two types of demonstration liquid‐crystal displays (LCDs) were fabricated using the prepared photonic‐crystal films in a backlight system. One is an area‐color LCD in which a single photonic‐crystal layer is used for each color pixel and the other is a full‐color TFT‐LCD in which three stacked photonic‐crystal layers are used as light‐conversion layers. The area‐color LCD was excited by using 365‐nm UV light, and the full‐color TFT‐LCD was excited by using 470‐nm blue LED light. Because of the photonic crystal's unique features that allow it to work as light‐emitting and light‐reflecting layers simultaneously, both LCDs demonstrate clear readable images even under strong ambient light, such as direct‐sunlight conditions, under which conventional displays including LCDs and OLED displays cannot demonstrate clear images. In particular, an area‐color LCD, which eliminated color filters, gives clear images under bright ambient light conditions even without backlight illumination. This fact suggests that a backlight system using novel photonic‐crystal layers will be suitable for energy‐efficient LCDs (e²‐LCDs), especially for displays designed for outdoor usage.     

Current status and future prospect of in‐cell‐polarizer technology

Abstract— A thin‐crystalline‐film (TCF) polarizer has been developed which can be used internally in liquid‐crystal‐display cells. Based on this material, a manufacturing process has been developed for the fabrication of monochrome LCDs with internal polarizers. A new TCF polarizer material and coating equipment, developed to realize a high‐performance color TFT‐LCD, are discussed.     

Thermal‐deformation characterization on the panel of TFT‐LCD TV. Part I: Mechanism of color distortion

Abstract— In this study we applied both numerical simulation and experimental validation to characterize the thermal deformation of the panel and the direct‐lit backlight unit (BLU) of a thin‐film‐transistor liquid‐crystal‐display television (TFT‐LCD TV). Heat emitted from cold‐cathode fluorescent lamps (CCFLs) causes thermal deformation of the LCD and extrudes the panel from the metal front shield at both upper corners: this finally leads to color distortion. In the numerical simulation based on thermal‐fluidic fields of the TFT‐LCD TV, natural convection of air that surrounded the CCFLs resulted in a high temperature at the upper‐right and upper‐left corners of the LCD panel. Numerical results were verified by temperature measurements with good consistency. Additionally, this study has established a measurement system to characterize the temperature distribution on both the BLU and panel and the thermal deformation of the panel causing the color distortion.     

An introduction to PSS‐LCDs: A fast‐optical‐response smectic LCD

Abstract— A new type of fast‐optical‐response liquid‐crystal display is introduced. This display uses a certain type of smectic liquid‐crystal material that has a fast optical response as well as a native wide viewing angle. Unlike well‐known smectic‐based LCD technologies, this new type of LCD technology is highly compatibile with most nematic‐based LCDs. This compatibility provides advantages for practical uses. Here, the initial molecular alignment and drive concept as well as the general performance of this new display technology are discussed.     

An overview of product issues in wide‐viewing TFT‐LCDs

Abstract— Several TFT‐LCD devices exhibiting high image quality have been developed and commercialized, overcoming the narrow viewing‐angle characteristics of conventional twisted‐nematic (TN) devices. Nevertheless, no single device dominates large‐sized TFT‐LCDs. In this paper, the product issues of existing LC devices related to manufacturing process and performance are discussed.     

Double‐faced TFT‐LCD having one LC panel and one lighting system

Abstract— We have developed a novel liquid‐crystal‐display (LCD) system referred to as a “Double‐Faced LCD.” It has only one LC panel and one lighting system, but it works not only as a transmissive‐type LCD from one side but also as a reflective‐type LCD from the other side. Therefore, the thickness and the weight of the Double‐Faced LCD can be reduced compared to those of conventional LC modules that have two LC panels and two lighting systems.     

Effective approaches for low temperature polysilicon TFT LCD post-mapping yield control problem

Low-temperature polysilicon (LTPS) technology has drawn the attention of many display manufacturers because it has several potential advantages over amorphous thin-film-transistor liquid crystal display TFT LCD). The mapping operation matches one TFT and one color-filter (CF) glass plate together to form one LCD plate. Each plate contains a certain number of cells that are independent devices. The matched LCD cell is good only when the TFT and CF cell match is good. When only a TFT or CF cell is good, there is a yield loss. The sorter is a robot used in LCD manufacturing systems to achieve higher yield in matching TFT and CF plates. This sorter contains several ports that can transfer CF glasses from CF cassettes to match TFT glasses. This is an important determinant for post-mapping yield. This study first proposes a linear programming formulation to optimize the plates-matching problem for the various ports. Next, we propose an algorithm to reduce the number of ways for choosing different matched objects when the number of matched cassettes is large. This algorithm avoids computer overload and provides an excellent solution. The empirical results illustrate the efficiency and effectiveness of the proposed approaches. Note to Practitioners - Yield is an important competitiveness determinant for thin-film-transistor liquid crystal display (TFT LCD) factories. TFT-LCD contains three major manufacturing sectors: the array, cell and module assembly processes. The yield loss from the cell process is one of the most critical steps. This study first formulates a linear programming for the TFT color-filter plates-matching problem in the cell process and a reduction algorithm then is developed to reduce the computational efforts. Our proposed approach is workable and it does not require a significant investment to produce yield improvement by applying the proposed matching algorithm.     

Ultra‐FFS TFT‐LCD with super image quality,fast response time,and strong pressure‐resistant characteristics

Fringe‐field‐switching (FFS) devices using liquid‐crystal (LC) with a negative dielectric anisotropy exhibit high transmittance and wide viewing angle simultaneously. Recently, we have developed an “Ultra‐FFS” thin‐film‐transistor (TFT) LCD using LC with a positive dielectric anisotropy that exhibits high transmittance, is color‐shift free, has a high‐contrast ratio in a wide range, experiences no crosstalk and has a fast response time of 25 msec. In this paper, the device concept is discussed, and, in addition, the pressure‐resistant characteristics of the devices compared with that of the twisted‐nematic (TN) LCD is discussed.