Simulation study of single‐cell‐gap transflective liquid crystal display with nonuniform potential

A single‐cell‐gap transflective liquid crystal display with a nonuniform electric potential is demonstrated. The top substrate has a top planar common electrode, a transparent dielectric layer with a general dielectric constant is coated on the bottom substrate, and two planar pixel electrodes with the same size are coated on the dielectric layer and the bottom substrate, respectively. With the different gaps between the two planar pixel electrodes and top planar pixel electrode, the nonuniform electric potential from the transmissive region (T region) to the reflective region (R region) is generated, while a bumpy reflector is coated under the bottom substrate. In this device, with the dielectric layer, the pixel and common electrodes generate a strong electric potential in the T region and a relatively weak electric potential in the R region. Consequently, the T and R regions accumulate the same optical phase retardation. The simulation results show that the display exhibits reasonably low operating voltage, high optical efficiency, and well‐matched voltage‐dependent transmittance and reflectance curves. Besides, the fabrication process and the driving mode of the transflective liquid crystal display are relatively simple, and it is suitable for mobile applications.     

A single‐cell‐gap transflective liquid‐crystal display with special electrodes

Abstract— A single‐cell‐gap transflective liquid‐crystal display with special electrodes was demonstrated. In the transmissive region, a strong longitudinal electric field was generated by decreasing the distance between the top and bottom transparent indium‐tin‐oxide electrodes; while in the reflective region, a weak longitudinal electric field is generated by increasing the distance between the top and bottom transparent indium‐tin‐oxide electrodes. And slit‐patterned electrodes were used to optimize the fringe field at the junction of the transmissive and reflective regions. As a result, both the transmissive and reflective display modes show well‐matched gray scales. The simulated single‐cell‐gap TR‐LCD has good performances.     

High‐transmittance in‐plane switching liquid crystal display device driven by three‐level voltages

We propose a single‐layered electrode structure using three voltage levels instead of two to achieve high transmittance in an in‐plane switching liquid crystal display device. The proposed structure consists of two pixel electrodes and one common electrode. By using three voltage levels, we can generate an in‐plane electric field higher than that in a conventional in‐plane switching device. We confirmed that by using the proposed structure, the transmittance of a liquid crystal device can be increased from 29% to 35% at a slightly lower operating voltage without using the double‐layered electrode structure required for the fringe‐field switching mode. The transmittance of the proposed device is higher than that of the fringe‐field switching device.     

Transflective blue‐phase liquid‐crystal display with corrugated electrode structure

Abstract— A transflective polymer‐stabilized blue‐phase liquid‐crystal display (BP‐LCD) with a corrugated electrode structure is proposed. To balance the optical phase retardation between the transmissive (T) and reflective (R) regions, two device structures are proposed. The first device structure has the same inclination angles but different cell gaps in the T and R regions. And the second device structure has the same cell gap but different inclination angles in the T and R regions. Both of the device structures can obtain well‐matched VT and VR curves. This display exhibits low operating voltage, high optical efficiency, and a wide viewing angle.     

A continuous‐viewing‐angle‐controllable liquid‐crystal display using a blue‐phase liquid crystal

Abstract— A continuous‐viewing‐angle‐controllable liquid‐crystal display (LCD) using a blue‐phase liquid crystal is proposed. To realize both wide‐viewing‐angle (WVA) mode and narrow‐viewing‐angle (NVA) mode with a single liquid‐crystal panel, each pixel is divided into a main pixel and a subpixel. The main pixel is for displaying images in both modes. The subpixel is for displaying images in WVA mode and controlling the viewing angle in NVA mode. The device exhibits a good viewing‐angle‐controlling characteristic and high transmittance.     

A single‐cell‐gap transflective liquid‐crystal display using different pretilt angles in transmissive and reflective regions

Abstract— A single‐cel l‐gap transflective liquid‐crystal display with two types of liquid‐crystal alignment based on an in‐plane‐switching structure is proposed. The transmissive region is almost homeotropically aligned with the rubbed surfaces at parallel directions while the reflective region has a homeotropic liquid‐crystal alignment. For every driving voltage for a positive‐dielectric‐anisotropy nematic liquid crystal, the effective cell‐retardation value in the transmissive region becomes larger than that in the reflective region because of optical compensation film which is generated by low‐pretilt‐angle liquid crystal in the transmissive region. Under the optimization of the liquid‐crystal cell and alignment used in the transmissive and reflective areas, the transmissive and reflective parts have similar gamma curves. An identical response time in both the transmissive and reflective regions and a desirable viewing angle for personal portable displays can also be obtained.     

A viewing‐angle‐controllable blue‐phase liquid‐crystal display

Abstract— A viewing‐angle‐controllable liquid‐crystal display (LCD) is proposed. When the device is only driven by an in‐plane electric field, it exhibits a wide‐viewing‐angle (WVA) mode. And it exhibits narrow‐viewing‐angle (NVA) mode when it is driven by a vertical electric field as well as an in‐plane electric field. In this manner, the viewing angle of the device can be controlled from 100° to 30°. The device exhibits a good viewing‐angle‐controlling characteristic and high transmittance.     

Active in‐cell touch circuit using floating common electrode as sensing pad for the large size in‐plane‐switching liquid crystal displays

In this paper, we propose an in‐cell active touch circuit using the concept of floating common electrode for large size in‐plane‐switching liquid crystal displays. Compared with the conventional passive in‐cell touch circuit, the proposed method can greatly reduce the readout channel numbers by sharing the sensing bus for one column. Because the touch signal is amplified in the pixel, the touch panel can be easily scaled up in size. Simulation results show that the difference between touch and no‐touch signals can be as large as 10 μA even with threshold voltage shift of ±1 V. The possible issues of the proposed method are experimentally verified.     

High‐transmittance in‐plane‐switching liquid‐crystal displays using a positive‐dielectric‐anisotropy liquid crystal

Abstract— The in‐plane‐switching (IPS) mode exhibits an inherently wide viewing angle and has been widely used for liquid‐crystal‐display (LCD) TVs. However, its transmittance is limited to ～76% compared to that of a twisted‐nematic (TN) cell if a positive‐dielectric‐anisotropy LC is employed. A special electrode configuration that fuses the switching mechanism of the conventional IPS and the fringe‐field switching (FFS) to boost the transmittance to ～90% using a positive LC has been developed. The new mode exhibits an equally wide viewing angle as the IPS and FFS modes.     

Blue phase dual‐view liquid crystal display based on directional backlight system

We design a blue phase dual‐view liquid crystal display (BP DVLCD) based on a directional backlight system. Combining the patterned electrodes with the directional backlight system, the cross‐talk ratio is reduced to only 1.17%. Moreover, the resolution and brightness will be tripled by using field‐sequential color display. In the preferred viewing area, the BP DVLCD has a high contrast ratio of ~1700:1.     

Transflective ferroelectric liquid‐crystal display with a single‐cell gap

Abstract— A ferroelectric liquid‐crystal (FLC) display was optimized as a transflective liquid‐crystal display (LCD). In this configuration, the single‐cell‐gap approach was considered. The optimized configuration exhibits a high contrast ratio, wide viewing angles, and achromatic (black/white) switching in both the transmissive and reflective modes. Because no double‐cell‐gap structure, no subpixel separation, and no patterning polarizers and retarders are included in the configuration, the configuration is easy to fabricate and also possess a perfect dark state. This configuration is also suitable for bistable applications.     

Single‐cell‐gap transflective liquid‐crystal display using double‐ and single‐mode approaches

Abstract— In this paper, many popular methods to study transflective liquid‐crystal‐displays (LCDs) have been discussed, and several new transflective LCD configurations with a single‐cell gap have been proposed. The traditional double‐cell‐gap method gives the best match of the transmittance/reflectance voltage curve (TVC/RVC) and also the widest viewing angle, but also brings the highest fabrication complexity. The single‐cell‐gap transflective LCD is much easier to fabricate and also shows a good match of TVC/RVC. A new methodology has been shown to find optimal configurations for single‐cell‐gap transflective LCDs. New configurations using multimode in a single pixel include twisted nematic (TN) optically compensated bend (OCB), TN electrically controlled birefringence (ECB), and TN low‐twisted nematic (LTN). TN and hybrid‐aligned nematic (HAN) modes have been investigated for single‐mode transflective LCDs. The results exhibit high contrast ratio, a good match of TVC/RVC, as well as wide viewing angle.     

A dual‐cell‐gap transflective liquid‐crystal display with identical response time in transmissive and reflective regions

Abstract— A dual‐cell‐gap transflective liquid‐crystal display (TR‐LCD) with identical response time in both the transmissive and reflective regions is demonstrated. In the transmissive region, strong anchoring energy is used to decrease the response time, while in the reflective region, weak anchoring energy is used to increase the response time. And overdrive voltage technology is adopted to make the response time identical in both the transmissive and reflective regions. The device structure and operating principle of the TR‐LCD was analyzed, the anchoring energy in the transmissive and reflective regions was designed, and the response time and electro‐optic characteristics of the TR‐LCD was calculated. The simulated dual‐cell‐gap TR‐LCD demonstrated good performances.     

Low‐temperature‐applicable polymer‐stabilized blue‐phase liquid crystal and its Kerr effect

Abstract— A type of polymer‐stabilized blue‐phase liquid crystal, which can be used in a low‐temperature environment, is proposed. The blue‐phase range after polymerization was widened to more than 73°C, and the blue‐phase texture is very stable even at a temperature as low as ?35°C. The electro‐optical performances dependence on polymer concentration was investigated. The results indicate that the saturation voltage increases and the hysteresis enhances as the polymer concentration increases. The rise and decay times could reach as low as 391 and 789 μsec, respectively. Such material also shows good electro‐optical behavior at a temperature of ?35°C. In addition, the Kerr constant was tested under a uniformly distributed electric field to be 2.195 nm/V² at room temperature and 2.077 nm/V² at ?35°C. The Kerr constant tested under white‐light illumination was 1.975 nm/V², which shows a small dispersion.     

A single‐cell‐gap transflective LCD using active‐level‐shift technology

Abstract— A single‐cell‐gap transflective LCD using active‐level‐shift (ALS) technology has been developed and is presented. An efficient pixel architecture has recently been designed to apply different voltages on transmissive and reflective subpixels through two separated storage capacitors, formed by a boosting electrode and pixel electrodes. A 2.2‐in. vertical‐alignment‐mode (VA) transflective LCD prototype with a similar gamma for both the transmissive and reflective areas was obtained. Compared to a conventional dual‐cell‐gap design, the new single‐cell‐gap design achieves a 17% higher aperture ratio and the contrast increased from 200:1 to 500:1.     

Single‐cell‐gap transflective liquid‐crystal display and the use of photoalignment technology

Abstract— In this paper, transflective liquid‐crystal‐display (LCD) technology will be reviewed, and several new single‐cell‐gap transflective LCD configurations are proposed. Photoalignment technology is studied especially for transflective‐LCD applications. In order to realize the optimal performance of the display as well as a matched transmittance/reflectance voltage curve (TVC/RVC) for the transflective configurations, two different single‐cell‐gap transflective‐LCD approaches will be discussed. The first one is the dual‐mode single‐cell‐gap approach, in which different liquid‐crystal modes are applied to the transmissive and reflective subpixels of the transflective LCD. The other approach is the single‐mode s ingle‐cell‐gap approach, in which an in‐cell retardation film is applied to adjust the performance and TVC/RVC matching of a transflective LCD. Photoalignment technology is used to fabricate the dual‐mode liquid‐crystal cell in the first approach and also the in‐cell retardation film in the second approach. Prototypes of the proposed configurations have been fabricated, which show good performance and a matched TVC/RVC.     

Viewing angle switchable blue‐phase liquid crystal display with low voltage and high transmittance

We propose a viewing angle switchable blue‐phase liquid crystal display with low voltage and high transmittance. In this device, in‐plane protrusions are used to lower operating voltage and improve the transmittance. Besides, the top electrode can control viewing angle of the proposed display. When no voltage is applied to the top electrode, the display shows wide viewing angle mode. On the contrary, this display shows narrow viewing angle mode. So, this device exhibits low operating voltage, high transmittance, and good viewing angle controllable characteristics.     

A reflective polarizer‐free display using dye‐doped polymer‐stabilized blue‐phase liquid crystals

Abstract— A reflective polarizer‐free display using dye‐doped polymer‐stabilized blue‐phase liquid crystal (DDPSBP‐LC) has been demonstrated. The mechanism is a combination of electrically tunable light absorption and Bragg reflection. In this paper, the influence of light absorption in DDPSBP‐LC by changing the dye concentration and absorption paths has been studied. Increased dye concentration can improve the contrast ratio of DDPSBP‐LC; however, the response time is the tradeoff. Increasing the cell gap can improve the contrast ratio of DDPSBP‐LC; however, the response time remains the same. The study of DDPSBP‐LC can help in shutter‐glass applications of 3‐D displays and electronic paper.     

Current status and future prospect of in‐cell‐polarizer technology

Abstract— A thin‐crystalline‐film (TCF) polarizer has been developed which can be used internally in liquid‐crystal‐display cells. Based on this material, a manufacturing process has been developed for the fabrication of monochrome LCDs with internal polarizers. A new TCF polarizer material and coating equipment, developed to realize a high‐performance color TFT‐LCD, are discussed.     

Simulation and fabrication of a fast fringe‐field switching liquid crystal with enhanced surface anchoring enabled by controlled polymer topology

We demonstrate a fringe‐field switching nematic liquid crystal with electro‐optical behavior modulated by both bulk and surface polymer stabilization. The polymer is formed by ultraviolet irradiation‐induced phase separation of various amounts of a reactive monomer in the planar‐aligned nematic liquid crystal. Simulation is carried out to verify the effect of anchoring energy. Experimental evidence validates the effect of monomer concentration on transmittance–voltage and response times curves of fringe‐field switching cells. The polymer‐stabilized alignment with a higher polymer concentration escalates the interaction between the liquid crystal and the polymer structure and increases the surface anchoring energy. The polymer stabilization also improves the dynamic response times of liquid crystal. The enabling polymer‐stabilized alignment technique has excellent electro‐optical properties such as a very good dark state, high optical contrast, and fast rise and decay times that may lead to development of a wide range of applications.