A new broadband circularly polarized square‐slot antenna with low axial ratios

A new broadband circularly polarized (CP) square‐slot antenna with low axial ratios is proposed in this article. The antenna is comprised of an L‐shaped microstrip line with tapered section and a square‐slot ground plane with some stubs and slots, which are utilized as perturbations for the desirable antenna performance. By loading stubs and slots in the square‐slot ground plane, the 2‐dB axial ratio bandwidth (ARBW) and 10‐dB return loss bandwidth for the presented antenna can be markedly improved. The measured results show that its 2‐dB ARBW is 4.2 GHz (54.2% from 5.65 GHz to 9.85 GHz) and its 10‐dB return loss bandwidth is about 8.9 GHz (92.7% from 5.15 GHz to 14.05 GHz). The proposed antenna features compact structure and broad 2‐AR bandwidth which could completely cover the WLAN (5.725‐5.85 GHz) band. Therefore, the proposed antenna is suitable for circular polarization applications in C band.     

Performance enhancement of nested hexagonal ring‐shaped compact multiband integrated wideband fractal antennas for wireless applications

In this paper, nested hexagonal ring‐shaped fractal antennas are designed and investigated which are different from each other in patch orientation. Initially, the multiband integrated wideband hexagonal nested ring antenna is designed (antenna‐I). To improve the multiband/wideband behavior, the patch orientation of antenna‐I is changed to ?60°/60° (antenna‐II), ?120°/120° (antenna‐III), and ?180°/180° (antenna‐IV). Antennas are designed on low cost FR‐4 glass epoxy substrate with relative permittivity of 4.4 and overall dimension 30 × 30 × 1.6 mm³. Comparison among antennas have been made and found that the antennas with negative orientation exhibit better results in terms of bandwidth, impedance matching, number of frequency bands, and gain. Designed antennas have been compared with each other and found that antennas‐II and III are better in performance as compared to antennas‐I and IV. Antenna‐II exhibits wider bandwidth of 1.26 (2.52‐3.78 GHz), 2.75 (4.03‐6.78 GHz), and 6.1 GHz (7.82‐13.92 GHz) with maximum gain of 7.14 dB. Similarly; antenna‐III exhibits the bandwidth of 340 MHz (1.92‐2.26 GHz), 820 MHz (3.04‐3.86 GHz), 4230 MHz (5.38‐9.61 GHz), and 3040 MHz (10.41‐13.45 GHz) with a maximum gain of 6.19 dB. Prototype of the designed antennas with satisfactory orientations are fabricated and tested for the validation of results. Simulated and measured results are also juxtaposed and observed in good agreement with each other. Antennas exhibit bidirectional and omnidirectional pattern in E‐plane and H‐plane, respectively, also the radiation efficiency of antennas are in acceptable range from 75% to 95%. Due to the wider bandwidth of designed antennas, they can be used for different wireless standards such as Advance Wireless Services AWS‐1, AWS‐2, AWS‐3, Wi‐MAX, WLAN, X‐band satellite communication, point‐to‐point wireless applications, ITU band, military satellite communication, television broadcasting, and military land and airborne systems.     

An UWB trapezoidal rings fractal monopole antenna with dual‐notch characteristics

An ultra‐wideband planar fractal monopole antenna with dual‐notch characteristics is presented in this article. The microstrip fed antenna consists of nested trapezoidal rings and defected ground plane. Measured results show that the proposed antenna operates with a 10 dB return loss bandwidth from 2.2 to 10.8 GHz with notch bands at (2500‐2690) MHz and (3300‐4200) MHz covering LTE 2500, WiMAX and part of C‐band.     

Wideband leaky‐wave antenna with consistent gain and wide beam scanning angle based on multilayered substrate integrated waveguide composite right/left‐handed transmission line

In this article, a wideband leaky‐wave antenna is designed for consistent gain and wide beam scanning angle by using the proposed multilayered substrate integrated waveguide (SIW) composite right/left‐handed transmission line (CRLH TL). The proposed SIW CRLH structure consists of two parts: an interdigital fingers slot of rotating 45° etched on the upper ground of the SIW, and a rotated parasitic patch beneath the slot. Due to the continuous phase constants change from negative to positive values of the proposed SIW‐CRLH under the balanced condition, the designed LWA can achieves a continuous beam‐scanning property from backward to forward over the operating frequency band. The designed antenna is fabricated and measured, the measured and simulated results are in good agreements with each other, indicating that the designed antenna obtains a measured continuous main beam scanning from backward ?78° to forward +76° over the frequency range from 7.7 to 12.8 GHz with a consistent gain of more than 9.5 dB. Besides, the designed antenna also exhibits a measured 3‐dB gain bandwidth of 45.1% with maximum gain of 15 dB. © 2016 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:731–738, 2016.     

A 60‐GHz on‐chip slot‐array antenna in integrated‐passive‐device technology for antenna‐in‐package applications

A new millimeter‐wave antenna structure on a low‐cost, production platform integrated passive device technology is presented. The antenna consists of a 2‐by‐1 array of slot antennas at 60 GHz. An in‐house developed on‐chip antenna measurement setup was used to characterize the fabricated antenna. The measurement results show an antenna gain of more than 5 dBi with a return loss of 18 dB at 60 GHz. The better‐than‐10‐dB impedance bandwidth of the antenna covers the 60‐GHz unlicensed band from 57 to 64 GHz. The 3‐dB beamwidths of the antenna are 105° and 76° at E‐plane and H‐plane at 60 GHz, respectively. The size of the die of the antenna is 2 mm × 4.5 mm. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:155–160, 2014.     

High isolation,proximity‐fed monostatic patch antennas with integrated self‐interference cancellation‐taps for ISM band full duplex applications

This work presents two dual polarized proximity‐fed monostatic patch antennas with improved interport isolation for 2.4 GHz industrial, scientific and medical band same frequency full duplex wireless applications. The presented antennas achieves the high interport decoupling through intrinsic isolation of the polarization diversity in conjunction with a simple single‐tap and two‐taps self‐interference cancellation (SIC) topologies. The polarization diversity isolation is achieved through two perpendicular microstrip feeds for proximity feeding to excite orthogonal polarization mode for transmit (T_x) and receive (R_x) modes. The prototype for proposed antenna with integrated single‐tap and two‐taps SIC circuit is tested to record its interport isolation, impedance bandwidths and gains for both T_x and R_x ports. The implemented antenna with single‐tap SIC circuit demonstrates 10 dB return‐loss bandwidth of ≥100 MHz for both T_x and R_x ports. The measured isolation exceeds 40 dB over the 40 MHz bandwidth. Moreover, the recorded peak isolation is better than 74 dB for implemented antenna prototype. Furthermore, the 40 MHz bandwidth with 40 dB isolation can be tuned with the help of SIC‐tap as demonstrated through the experimental results. The measured gain levels are around 4.6 dBi for both T_x and R_x port. The same antenna structure with integrated two‐taps SIC topology features better than 55 dB isolation within 10 dB return loss bandwidth of 100 MHz. The peak isolation exceeds 97 dB and isolation levels are better than 60 and 80 dB over 50 and 20 MHz bandwidths, respectively, for presented antenna with two‐taps SIC configuration. The compact antenna offers comparatively wider impedance and isolation bandwidth with improved SIC levels compared to previous designs.     

Coplanar waveguide‐fed electrically small dual‐polarized short‐ended zeroth‐order resonating antenna using Ω‐shaped capacitor and single‐split ring resonator for GPS/WiMAX/WLAN/C‐band applications

This work explains the design and analysis of a triple‐band electrically small (ka = 0.56 < 1) zeroth‐order resonating (ZOR) antenna with wideband circular polarization (CP) characteristics. The antenna compactness is obtained due to ZOR frequency of composite right/left‐handed (CRLH) transmission line (TL) and wideband CP radiation are achieved due to the introduction of single‐split ring resonator and asymmetric coplanar waveguide fed ground plane. The proposed antenna obtains an overall electrical size including the ground plane of 0.124 λ₀ × 0.131 λ₀ × 0.005 λ₀ at 1.58 GHz and physical dimension of 23.7 × 25 × 1 mm³ are achieved. The antenna provides a size reduction of 44.95% compared to a conventional monopole antenna. The novelty behind the ohm‐shaped capacitor is the generation of extra miniaturization with better antenna compactness. The antenna provides dual‐polarized radiation pattern with linear polarization radiation at 1.58 and 3.54 GHz, wideband CP radiation at 5.8 GHz. The antenna measured results shows good impedance bandwidth of 5%, 6.21%, and 57.5% for the three bands centered at 1.58, 3.54, and 5.8 GHz with a wider axial ratio bandwidth (ARBW) of 25.47% is obtained in the third band. The antenna provides a higher level of compactness, wider ARBW, good radiation efficiency, and wider S₁₁ bandwidth. Hence, the proposed antenna is suitable for use in GPS L1 band (1.565‐1.585 GHz), WiMAX 3.5 GHz (3.4‐3.8 GHz) GHz, WLAN 5.2/5.8 GHz (5.15‐5.825 GHz), and C‐band (4‐8 GHz) wireless application systems.     

Compact microstrip antennas with very wide ARBW and triple circularly polarized bands

This article presents two compact circularly polarized microstrip antennas with a very wide 3 dB axial ratio bandwidth and triple circularly polarized bands. A hexagonal stub (circular polarization element) along with tuning element in the ground plane is used for achieving wide 3 dB ARBW in antenna‐1, while a novel approach of using a parasitic strip around the circular polarization element is used in antenna‐2 for introducing band elimination notches in the circularly polarized band of antenna‐1. The antenna‐1 has a ?10 dB impedance bandwidth of 12.34% (3.8‐4.3 GHz), 84.02% (4.9‐12 GHz), and 3 dB ARBW of 79.94% (4.9‐10.9 GHz). The antenna‐2 displays circularly polarized band elimination notch characteristics with ?10 dB impedance bandwidth of 24.80% (3.85‐4.94 GHz), 31.72% (6.1‐8.4 GHz), 25.35% (9.3‐12 GHz), and 3 dB ARBW of 4.84% (4.63‐4.86 GHz), 19.08% (6.02‐7.29 GHz), and 5.7% (9.54‐10.1 GHz). Both the antennas are designed and fabricated on FR4 substrate of dimension (0.52 × 0.52 × 0.04)λ₀ at a frequency of 7.9 GHz.     

New Compact antenna based on simplified CRLH‐TL for UWB wireless communication systems

This letter presents the experimental results of a novel planar antenna design which is synthesized using simplified composite left/right‐handed transmission‐line (SCRLH‐TL), which is a version of a conventional composite left/right handed‐transmission‐lines (CRLH‐TL), however, with the omission of shunt‐inductance in the unit‐cell. SCRLH‐TL exhibits a right‐handed response with nonlinear dispersion properties and a smooth Bloch‐impedance distribution. Arranged within the inner slot of the antenna are three smaller rectangular patch radiators. Each patch radiator is embedded with an E‐shaped notch, and located in the antenna conductor is a larger E‐shaped notch next to the 50‐Ω termination. The E‐shaped notches constitute SCRLH‐TL property. The gap in the slot between the smaller patches and the conductor next to the larger E‐shaped notch determines the impedance bandwidth of the antenna. The dimensions of the smaller patches determine the radiation characteristics of the antenna. The antenna is excited using a conductor‐backed coplanar waveguide transmission‐line. The antenna covers a bandwidth of 7.3 GHz between 0.7 GHz and 8GHz, which corresponds to 167.81%. In this band, the antenna resonates at 4.75 GHz and 7 GHz; the gain and radiation efficiency at these frequencies are 4 dBi—80% and 3.6 dBi—73%, respectively. The antenna's performance was validated through measurement. The antenna has dimensions of 0.0504λ₀ × 0.0462λ₀ × 0.0018λ₀, where λ₀ is free‐space wavelength at 700 MHz. © 2016 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:217–225, 2016.     

A brief of recent research progress on ionospheric disturbances

Ionospheric disturbances are the main causes of space weather events, which seriously influence accurate navigation, telecommunication, and so on. It is a fundaznental issue to detect and analyze the dis- turbance processes of the ionosphere. Theoretically, the understanding of the mechanisms of most ionospheric disturbances depends on observational results. With the development of space observation techniques and re- lated equipments, various efforts have been made to analyze the long-term statistical variations as well as sudden disturbances of ionospheric observation results. We briefly report some research progresses of ionospheric dis- turbances achieved in recent years, with regard to ground-based and satellites observations. The purpose is to provide a reference about the latest research progresses and improve the development of the future ionospheric disturbances observations and related researches.     

Polarizer superstrate and SRR‐loaded high‐gain dual band dual polarized waveguide slot array antenna

This article presents a high‐gain dual band dual polarized waveguide slot array antenna. Three split ring resonators (SRRs) are placed on the transverse plane of a slotted waveguide at uniform distance to achieve dual band response whereas a polarizer superstrate has been used to change the linear polarization of the lower band to circular polarization. Ansys HFSS 14.0 has been used for simulation and optimization purpose. Proposed antenna shows two 10 dB return loss bandwidth covering the frequency range 8.41‐8.88 and 9.31‐10.43 GHz, respectively. The lower band offers a circular polarization and upper band offers a linear polarization.     

Asymmetric circularly polarized open‐slot antenna

A circularly polarized printed antenna using an asymmetric open‐slot is designed in this paper. The presented antenna consists of conducting ground plane with open wide‐slot, fed electromagnetically by a microstrip feedline. The slot and feedline are positioned at the edge of the ground plane and substrate, hence making the antenna asymmetric. The measured results show that the |S₁₁| < ?10 dB impedance bandwidth is 125% (3.2‐14 GHz) and the broadband axial ratio bandwidth is 61% (3.2‐6 GHz). The antenna is very simple and has a small size of 25 mm × 25 mm, making it attractive for compact wireless WLAN, ISM, WiMAX, and C‐band applications.     

Bandwidth and gain‐enhanced composite right/left‐handed antenna for ultra‐wideband applications

A coplanar waveguide‐fed metamaterial antenna is presented for ultra‐wideband (UWB) applications. The proposed antenna is designed with single unit‐cell composite right/left‐handed transmission line (CRLH‐TL) loaded with a split‐ring resonator (SRR). The UWB characteristic is obtained by merging the zeroth‐order resonance of CRLH‐TL with two additional resonances due to the ground plane and SRR respectively. Subsequently, a partial reactive impedance surface is embedded on the rear side of the proposed antenna to enhance the realized gain without affecting the UWB response. The overall size of the antenna is 0.241λ_o x 0.267λ_o x 0.013λ_o (28.8 x 32 x 1.6 mm³), where λ_o is the free space wavelength at 2.51 GHz. The measured results indicate –10 dB fractional bandwidth of 139.19% (2.51‐14 GHz) with realized gains of 2.3, 4.6, and 6 dBi at the resonant frequencies 4, 7.84, and 10.29 GHz respectively. The measured peak realized gain is 6.6 dBi at 10.6 GHz. The radiation efficiency is above 63.85% for the entire UWB range with a peak value of 86.84%. A fairly stable group delay with variation within 1 ns is obtained throughout the operating frequency band. A good agreement has been observed between the measured and simulated results.     

Wideband circularly polarized dielectric resonator antenna coupled with meandered‐line inductor for ISM/WLAN applications

A new meandered‐line inductor fed wideband circularly polarized rectangular dielectric resonator antenna (DRA) with partial ground plane has been developed in this work. Meandered‐line inductor feed and partial ground plane are used for generation of orthogonal modes, hence circular polarization (CP) in DRA. By controlling the length of meandered‐line inductor, three different CP DRA have been designed for different wireless applications such as Wi‐MAX and WLAN/ISM 2400 band. Distribution of electric field inside rectangular DRA shows that all three antenna having TE_11δ mode. Finally, a lower frequency band application at 2.4 GHz (ISM) called here as Proposed Antenna, has been considered for fabrication. This designed antenna shows measured ?10 dB input impedance bandwidth of 20.67% and 3‐dB axial ratio bandwidth of 27.95% in broadside direction. All these three CP antennas (Antenna‐1 to Proposed Antenna) are showing stable gain and right hand circular polarization in broadside direction.     

Novel planar dual‐band balanced antipodal slot‐dipole composite antenna with reduced ground plane effect

A novel planar, dual‐band antenna composed of a symmetrical dipole and balanced antipodal slot radiator with low ground plane effect is proposed and investigated. Operation principle of the antenna is analyzed and design equations are drawn first. Then, the return loss, surface current distribution, radiation patterns, and gain are numerically and experimentally studied in detail. The impedance bandwidth of the antenna is from 2.36 to 2.56 and 5.13 to 12 GHz for return loss larger than 10 dB. The antenna has omnidirectional pattern at the lower band and quasi‐directional pattern at the higher band, and it has good immunity to a neighboring, large ground plane. The proposed antenna should be useful for dual‐band communication or identification systems. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2012.     

Compact high isolation wideband 4G and 5G multi‐input multi‐output antenna system for handheld and internet of things applications

This article presents a compact wideband multi‐input multi‐output (MIMO) antenna with a high port‐to‐port isolation, having a height h = 3.5 mm for 4G, 5G, and Internet of things (IoT) applications. Two identical planar inverted‐F antennas (PIFA) are used in this antenna system. For achieving wideband characteristics, closed‐ended and open‐ended rectangular slots are etched out on top plate of each PIFA, whereas a slot is etched in ground plane under the top plate of each PIFA. For achieving high isolation, a rectangular slot is etched out in the center of ground plane between two PIFAs. For further reduction in mutual coupling, a small rectangular strip is connected between the top plates of two PIFAs that introduce an antiresonance for enhancing isolation between two PIFA elements. The minimum isolation obtained between the ports of the two PIFAs is about ?20 dB. The minimum impedance bandwidth obtained by the two PIFAs is from 2 to around 3.6 GHz, thus become a wide band antenna covering WLAN band (2.45GHz), 4G‐LTE bands, WiMAX bands (IMT‐2.1 GHz, IMT‐2.3 GHz, and IMT‐E 2.6 GHz), and a sub‐6 GHz 5G band (3.4‐3.6 GHz). The simulated results are compared with the measured ones that are generally found in good agreement. Being low profile and compact, this antenna can be used for advanced 5G communication systems and IoT devices.     

A miniaturized multi‐wideband Quasi‐Yagi MIMO antenna system

A multi‐band directional multiple‐input–multiple‐output (MIMO) antenna system is presented based on a rectangular loop excited Quasi‐Yagi configuration. A 64% reduction in size is obtained using a rectangular meandered element as well as a small ground plane. The proposed two‐element MIMO antenna system covers the Telemetry L‐band and several LTE/WLAN bands. It has a wide measured bandwidth of 689 MHz (1.897–2.586 GHz) in the desired band centered at 2 GHz, and a measured bandwidth of more than 168 MHz across rest of the bands. The MIMO antenna system has a total size of 45 × 120 × 0.76 mm³, with a single element size of 55 × 60 × 0.76 mm³. The non‐desired back‐lobe radiation which is obtained using a small ground plane, is significantly reduced by using a novel defected ground structure (DGS) as compared with the complex techniques present in literature. The proposed DGS provides a high measured front‐to‐back ratio of 14 dB at 2 GHz and 11 dB in other bands. A maximum measured realized gain of 5.8 dBi is obtained in the desired band using a single parasitic director element. The proposed MIMO antenna system has a minimum measured radiation efficiency of 70%, isolation of 12 dB, and envelope correlation coefficient of 0.098 within all bands which ensures very good MIMO performance.     

A wideband circularly polarized slot antenna with antipodal strips for WLAN and C‐band applications

A single‐fed circularly polarized square shaped wide slot antenna with modified ground plane and microstrip feed has been presented. The field in the slot is perturbed by introducing an antipodal strips section attached with a microstrip line to produce circular polarization in a wide band of frequencies. The antipodal strip section consists of a group of four strips of unequal length and separation. The presence of asymmetric perturbations in the slot is mainly responsible for exciting two orthogonal modes in the slot having equal magnitude and 90° phase difference which results in circular polarization. A wide bandwidth of 3.3 GHz (4.4 GHz‐7.7 GHz) has been achieved for an axial ratio value AR < 3 dB with the minimum axial ratio value being 0.3 dB. The impedance bandwidth for |S₁₁| < ?10 dB ranges from 4.3 GHz to 8 GHz, and therefore covers most of the C‐band communication systems. The antenna exhibits stable radiation patterns throughout the circular polarization bandwidth with a gain around 6 dBi in entire operational bandwidth. A prototype of antenna was fabricated and measured. The antenna has a planar size 0.40λ₀ × 0.40λ₀ and thickness of 0.02λ₀ where λ₀ is the wavelength in free space at the lowest frequency. With its compact size and low profile, the antenna is a favorable choice for WLAN (5.15‐5.85 GHz) and a wide variety of C‐band wireless applications.     

A compact printed ultra‐wideband multiple‐input multiple‐output prototype with band‐notch ability for WiMAX,LTEband43, and WLAN systems

A compact ultra‐wideband multiple‐input multiple‐output (UWB‐MIMO) antenna with good isolation and multiple band‐notch abilities is developed in this work. It consists of two quadrant shaped monopole antennas backed by ground stubs. A good isolation is achieved due to the two proposed extended curved ground stubs. The frequency rejection for the WLAN system is realized by loading a capacitive loaded loop resonator adjacent to the feed line. The band rejection for the WiMAX and LTE band43 system is achieved by embedding a quadrant shaped CSRR on each radiator's surface. The measured bandwidth of the antenna is 3.06 GHz‐11 GHz (|S₁₁| < ?10 dB and |S₂₁| < ?18 dB) with a band rejection from 3.5 GHz‐4 GHz to 5.1 GHz‐5.85 GHz, respectively. Time domain performances are investigated in terms of group and phase delay characteristics. Diversity characteristics are evaluated in terms of the envelope correlation coefficient, mean effective gain, and channel capacity loss.     

Wideband asymmetric microstrip‐fed circularly polarized antenna with monofilar spiral stub for WLAN application

A wideband circularly polarized printed antenna is proposed and fabricated, which employs monofilar spiral stubs and a slit in the asymmetrical ground plane which are fed by an inverted L‐shaped microstrip feedline. The CP operation is realized by embedding an inverted‐L shaped strip and modified ground plane and can be markedly improved by loading monofilar spiral stubs asymmetrically connected at the edge of the ground plane. After optimization, the measured results of the finally structure demonstrate that a 10‐dB bandwidth of 67.6% from 4.6 to 9.3 GHz and a 3‐dB axial‐ratio bandwidth (ARBW) for circular polarization (CP) of 60.1% from 5 to 9.3 GHz could be achieved which could completely cover the WLAN (5.725‐5.85 GHz) band. Therefore, the proposed antenna is suitable for circular polarization applications in C band. To explain the mechanism of broadband circular polarization operation, the analysis of magnetic fields distributions and a parametric study of the design are given. Compared to other recent works, a simpler structure, wider axial ratio and impedance bandwidths and a more compact size are the key features of the proposed antenna.