A two‐layer beam‐steering array antenna with 4 × 4 modified Butler matrix fed network for switched beam application

This paper presents a novel two layers beam‐steering array antenna fed by a 4 × 4 modified Butler matrix. Each of the radiation elements have been replaced by a collection of 2 × 2 circularly polarized (CP) square patches, which joined together by a modified sequentially rotated feed network. The antenna array consists of 2 × 5 CP square patches, which connected to four ring sequential rotation and fed by butler matrix. The proposed Butler matrix which plays a role as beam‐steering feed network consists of four novel 90° circular patch couplers and two 45° half circular patch phase shifter. Altogether, using of a 2 × 5 phased array antenna and a modified Butler matrix cause to empower array antenna for covering frequency range between 4.67 to 6.09GHz, the maximum gain of 14.98 dB and 3‐dB axial ratio bandwidth of 1.2GHz (4.9~6.1GHz) is attained.     

High gain substrate integrated waveguide beam scanning antenna with sub‐array elements

A method to enhance the gain of substrate integrated waveguide (SIW) beam scanning antenna is proposed in this article. 2 × 2 SIW cavity‐backed sub‐arrays are employed in array design. The antenna is constructed on two layers. The top layer places four SIW cavity‐backed sub‐arrays as radiating elements and the bottom layer is an SIW transmission line to feed the sub‐arrays. Beam scanning feature can be obtained due to the frequency dispersion. Moreover, through separating radiators to the other layer and using 2 × 2 SIW cavity‐backed sub‐arrays as radiating parts, the antenna gain is improved significantly. For a linear array, 4.1 to 6.8 dB gain enhancement is achieved compared to a conventional SIW beam scanning antenna with the same length. Then, the linear array is expanded to form a planar array for further gain improvement. A 64‐element planar beam scanning array is designed, fabricated, and tested. Experimental results show that the proposed planar array has a bandwidth from 18.5 GHz to 21. 5 GHz with beam scanning angle from ?5° to 11.5° and gain in the range of 20.5 to 21.8 dBi. The proposed high gain beam scanning antennas have potential applications in radar detection and imaging.     

Circularly polarized 1 × 4 square slot array antenna by utilizing compacted modified butler matrix and branch line coupler

Circularly polarized (CP), beam steering antennas are preferred to reduce the disruptive effects such as multi‐path fading and co‐channel interference in wireless communications systems. Nowadays, intensive studies have been carried out not only on the specific antenna array design but also their feeding networks to achieve circular polarization and beam steering characteristics. A compact broadband CP antenna array with a low loss feed network design is aimed in this work. To improve impedance and CP bandwidth, a feed network with modified Butler matrix and a compact ultra‐wideband square slot antenna element are designed. With this novel design, more than 3 GHz axial ratio BW is achieved. In this study, a broadband meander line compact double box coupler with impedance bandwidth over 4.8‐7 GHz frequency and the phase error less than 3° is used. Also the measured impedance bandwidth of the proposed beam steering array antenna is 60% (from 4.2 to 7.8 GHz). The minimum 3 dB axial ratio bandwidth between ports, support 4.6–6.8 GHz frequency range. The measured peak gain of the proposed array antenna is 8.9 dBic that could scan solid angle about ～91 degree. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:146–153, 2016.     

Miniaturized 1D beam switching and 2D printed Yagi-Uda antenna arrays

This article presents a multi-board arrangement of printed Yagi-Uda antennas that can be configured into 1D and 2D arrays. First, a 1 × 4 collinear array is designed and fed with a metamaterial Butler matrix (BM) network to provide beam switching at four azimuthal directions. Slow-wave concept is used in designing the hybrid, crossover and delay sections of BM to achieve a footprint reduction of 67%. The 1 × 4 collinear array with the feed network achieves 8.42–11.7 dBi gain and 21.7–25.7 degrees half power beam width (HPBW) in horizontal plane for the four switched beam patterns at 5.8 GHz in simulations. Second, measurement results of the fabricated 1 × 4 collinear array with its miniaturized feed network confirm a range of 22–27 degrees in HPBW in the horizontal plane. Finally, parasitic structures are designed to reduce antenna coupling and a 3-shelf holder is proposed to stack the 1 × 2 printed Yagi antenna subarray boards in compact 2D planar array configurations. Simulations of the 2 × 4-array demonstrate achieving 13.09 dBi peak gain at 5.8 GHz along with reduction of the HPBW by 24.7 degrees in horizontal plane in comparison with the 1 × 4-array prototype.     

A novel substrate integrated waveguide cavity‐backed self‐diplexing antenna array with frequency beam scanning characteristic

This article presented a substrate integrated waveguide (SIW) cavity‐backed self‐diplexing antenna array with frequency beam scanning characteristic. The proposed array consists of 16 SIW cavity‐backed slot antennas. The SIW cavity‐backed slot antenna can be fed by two separate ports to resonate at two different frequencies and achieve high isolation better than 20 dB between two input ports. The proposed element is a typical self‐diplexing antenna. These cavity‐backed slot antennas are shunt‐fed by a compact 1 to 16 SIW power divider and series‐fed by a set of microstrip lines, respectively. As a result, this array achieves an unidirectional radiation pattern at 10.2 GHz with high gain of 15.10 dBi, and a frequency beam scanning characteristic from 7.0 to 9.0 GHz ranging from ?50° to 46°.     

Multilayered substrate integrated waveguide 4 × 4 butler matrix

In this article, a multilayered substrate integrated waveguide (SIW) Butler matrix beam‐forming network is proposed, designed, and demonstrated at 24 GHz for automotive radar system applications. The proposed low‐cost SIW structure can be used to develop a highly integrated multibeam antenna platform in automotive radar systems and other applications. In this structure, an SIW H‐plane coupler is optimized with an H‐plane slit to provide the required phase shift. A class of SIW E‐plane 3‐dB couplers in doubled layer substrate are studied and designed as the fundamental building blocks to avoid crossovers usually required in the construction of a Butler matrix. A 4 × 4 matrix is investigated and designed, which shows excellent performance over 22–26 GHz frequency band. Two types of antenna are tested with the proposed matrix scheme. First, an antipodal linearly tapered slot antenna (ALTSA) is incorporated into the Butler matrix to verify the broadband performances. Second, a longitudinal slotted waveguide antenna array is examined to generate radiation patterns in the broadside direction. Measured results agree well with simulated counterparts, thus validating the proposed multilayer SIW design concepts. In the next sections, the use as feeding networks for providing the reconfigurability operation of an antenna will be illustrated. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE , 2012.     

Compact bilayer substrate integrated waveguide leaky wave antenna with dumbbell‐shaped slot based on the TE20 mode

In this article, a compact dual layer leaky wave antenna array is simulated and constructed using the substrate integrated waveguide (SIW) based on the TE₂₀ mode at the X‐ and Ku‐bands. The proposed antenna is designed by creating dumbbell‐shaped slots on the upper layer of the SIW. These slots have increased the antenna bandwidth so that the proposed antenna has a bandwidth of 9.5 to 13.7 GHz and a fractional bandwidth of 36%. In addition, to excite the TE₂₀ mode, an SIW power divider is used in the feeding network of the antenna located in the bottom layer. Moreover, the gain and directivity are other advantages of the proposed antenna so that at 12.5 GHz the antenna peak gain reaches to 15.7 dB. Antenna beam scanning angle is from 5° to 81°. This antenna is simulated and analyzed by the CST Microwave Studio software. The obtained results from the antenna test lab confirm the simulation results.     

Compact circularly polarized beam‐switching wireless power transfer system for ambient energy harvesting applications

In this work, we propose a circularly polarized (CP) beam‐switching wireless power transfer system for ambient energy harvesting applications operating at 2.4 GHz. Beam‐switching is achieved using a low profile, electrically small CP antenna array with four elements and a novel miniaturized 4× 4 butler matrix. The CP antenna is designed with an e‐shaped slot and four antennas. The CP antenna measures 0.32 λ₀× 0.32 λ₀× 0.006 λ₀ at 2.4 GHz. The antenna has a gain of 3 dBic and an axial ratio less than 3‐dB at 2.4 GHz. A linear antenna array consisting of four elements is designed with the CP antenna element with an inter‐element distance of 0.29 λ₀ . A 4× 4 butler matrix with miniaturized couplers and crossovers are used to feed the four antenna array elements. Based on the input port of excitation, the main beam of the antenna array is demonstrated to be switched to four directions: ?5°, 65°, ?55°, and 20°. A CP rectenna is used to demonstrate the wireless power transfer capability of the combination of the butler matrix and the CP‐antenna array. The rectenna consists of a Teo‐shaped CP antenna and a rectifier. The open circuit voltage at the output of the rectenna is found to peak value of 30 mV at ?3°, 61°, ?53°, and 17°. Thus a complete system for CP wireless power transfer including the power transmission system as well as the RF energy harvesting sensor is designed and experimentally verified.     

Design and evaluation of a vertically integrated passive two‐dimensional beam switching antenna array at 60 GHz

A millimeter‐wave two‐dimensional (2D) beam switching planar microstrip patch antenna array excited by a 4 × 4 substrate‐integrated waveguide Butler matrix (BM) is presented in this article. The BM architecture is modified to feed the planar array in a vertically integrated multilayer design to minimize parasitic effects due to junction discontinuity and reduce the radio frequency (RF) front‐end footprint. This feed architecture enables the designer to control the phased array inputs to achieve a set of beam directions in four quadrants of radiation space at a desired elevation angle. For verification of beam switching via over‐the‐air measurements at 60 GHz, a bench‐top anechoic chamber with proper transmitter and receiver antenna positioners was designed and fabricated using in‐house laboratory resources. 2D beam steering was confirmed in the intended four quadrants of radiation space at ?₀ = 50°, 140°, 220°, and 300° and θ₀ = 30° ± 5°, meeting the design specifications with a very good margin. Each switched beam demonstrated between 5 and 6 dBi gain at 60 GHz, which is within 1 dB deviation from the simulated results.     

Millimeter‐wave planar high gain SIW antenna using half elliptic radiation slots

This article reports a high gain millimeter‐wave substrate integrated waveguide (SIW) antenna using low cost printed circuit board technology. The half elliptic slots which can provide small shunt admittance, low cross polarization level and low mutual coupling are etched on the board surface of SIW as radiation slots for large array application. Design procedure for analyzing the characteristics of proposed radiation slot, the beam‐forming structure and the array antenna are presented. As examples, an 8 × 8 and a 32 × 32 SIW slot array antennas are designed and verified by experiments. Good agreements between simulation and measured results are achieved, which shows the 8 × 8 SIW slot array antenna has a gain of 20.8 dBi at 42.5 GHz, the maximum sidelobe level of 42.5 GHz E‐plane and H‐plane radiation patterns are 22.3 dB and 22.1 dB, respectively. The 32 × 32 SIW slot array antenna has a maximum measured gain of 30.05 dBi at 42.5 GHz. At 42.3 GHz, the measured antenna has a gain of 29.6 dBi and a maximum sidelobe level of 19.89 dB and 15.0 dB for the E‐plane and H‐plane radiation patterns. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:709–718, 2015.     

A WiMAX circularly polarized antenna array using slot‐coupling feeding technique

In this letter, we present a circular polarization antenna array using the novel slot‐coupling feeding technique. This antenna includes eight elements which are installed in line, each array element is fed by means of two microstrip lines with equal amplitude and phase rotation of 90°. The feeding microstrip lines are coupled to a square patch through a square‐ring slot realized in the feeding network ground plane. With the presence of the slots, this antenna array is able to cover the range of frequency of 3 GHz to 4 GHz. The size of the proposed antenna array is 7λ × 1.8λ × 0.4λ. The measured gain is 15.2 dBi and the bandwidth of S11< ?10 dB is 1 GHz (3–4 GHz, 28%). The antenna array is suited for the WiMAX applications. With the use of slot‐coupling feeding technique, the measured bandwidth for axial ratio < 3 dB is about 24% in the WiMAX frequency band (3.3–3.8GHz). The measured HPBW of the y–z planes is larger than 62°. © 2016 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:567–574, 2016.     

Circularly polarized beam‐steering antenna array for ultra‐high frequency radio frequency identification applications

A circularly polarized beam‐steering antenna array with Butler matrix is designed in this letter for ultra‐high frequency radio frequency identification applications. To achieve the identification of the fast‐moving tag groups, a 3 × 4 Butler matrix is utilized to switch the radiation directions at ?25°, 0°, and +25°, respectively. Besides, series‐fed patch antenna element is designed and the 1 × 4 antenna array is built with element rotation for a good polarization performance. Finally, the proposed antenna system is fabricated and the identification area and radiation performance are tested.     

A 2 × 2 array antenna with circular polarization and conical beam radiation

A circular disk patch antenna loaded with a hemi‐circular slot is initially proposed for achieving circular polarization (CP). To exhibit broad CP bandwidth that can cover the WLAN 2.4 GHz operating band, the patch antenna is fed by an L‐shaped probe. To further attain conical beam radiation with peak gain of ～8 dBic at ±30 degrees theta angle (θ), a 2 × 2 array type is proposed in this study, in which four circular disk patch array elements are arranged in a sequentially rotated fashion via a corporate feed network. Here, desirable 3‐dB axial ratio (AR) bandwidth and 10‐dB impedance bandwidth of ～5% and 21% were measured. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:223–228, 2014.     

Millimeter‐wave wideband circularly polarized monopulse antenna using the sequential rotation feeding technique

This article presents the design and implementation of a single‐layer wideband millimeter‐wave circularly polarized (CP) monopulse cavity‐backed antenna based on substrate integrated waveguide (SIW) technology. The antenna consists of a 2× 8 array of CP cavity‐backed antenna elements, a 90° 3‐dB coupler, power dividers, and phase shifters. In order to enhance the operating bandwidths, the sequential rotation feeding technology is adopted in the design of the monopulse antenna. To validate the proposed concept, a prototype operating at 42 GHz was fabricated and measured. The measured 3‐dB axial ratio (AR) bandwidth for the sum beam can cover a frequency range from 37 to 46 GHz. The measured gain for the sum beam at the center frequency of 42 GHz is 17.5 dBiC, while the null‐depth of the difference beam is measured to be ?36.8 dB. The proposed monopulse antenna has advantages of low‐cost, easy‐fabrication, and easy integration with planar circuits.     

Wideband leaky‐wave antenna with consistent gain and wide beam scanning angle based on multilayered substrate integrated waveguide composite right/left‐handed transmission line

In this article, a wideband leaky‐wave antenna is designed for consistent gain and wide beam scanning angle by using the proposed multilayered substrate integrated waveguide (SIW) composite right/left‐handed transmission line (CRLH TL). The proposed SIW CRLH structure consists of two parts: an interdigital fingers slot of rotating 45° etched on the upper ground of the SIW, and a rotated parasitic patch beneath the slot. Due to the continuous phase constants change from negative to positive values of the proposed SIW‐CRLH under the balanced condition, the designed LWA can achieves a continuous beam‐scanning property from backward to forward over the operating frequency band. The designed antenna is fabricated and measured, the measured and simulated results are in good agreements with each other, indicating that the designed antenna obtains a measured continuous main beam scanning from backward ?78° to forward +76° over the frequency range from 7.7 to 12.8 GHz with a consistent gain of more than 9.5 dB. Besides, the designed antenna also exhibits a measured 3‐dB gain bandwidth of 45.1% with maximum gain of 15 dB. © 2016 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:731–738, 2016.     

A high‐isolation dual‐polarized quad‐patch antenna fed by stacked substrate integrated waveguides for millimeter‐wave application

A high‐isolation dual‐polarized quad‐patch antenna fed by stacked substrate integrated waveguide (SIW) that is suitable for millimeter‐wave band is proposed in this paper. The antenna consists of a quad‐patch radiator, a two‐layer SIW feeding structure and two feeding ports for horizontal and vertical polarization. The two‐layer stacked SIW feeding structure achieves the high isolation between the two feeding ports (|S₂₁| ≤ ?45 dB). Based on the proposed element, a 1 × 4 antenna array with a simple series‐fed network is also designed and investigated. A prototype working at the frequency band from 38 to 40 GHz is fabricated and tested. The results indicate that the proposed antenna has good radiation performance at 38 GHz that covers future 5G applications.     

A stacked array antenna able to make a very large gain and tilt the end‐fire beam at the ISM‐band

In this article, an antenna is designed to generate an end‐fire radiated beam of a very large gain for a Printed Circuit Board (PCB) structure and steer the beam at an Industrial Scientific Medical (ISM)‐band. A flush‐mounted slot‐coupled feed and two parasitic layers can increase the antenna gain substantially. This single element is made to be a 1‐by‐8 array to generate a very high gain to deliver wireless power more than single element to the far‐field zone and spot the receiver of interest without interference toward others on the azimuth plane. Furthermore, four layers of this array are stacked to tilt the beam up and down on the elevation plane for target selectivity of a higher degree and more wireless‐power transfer. The antenna system is implemented with the substrate of Rogers 4350B and operated at 2.4 GHz as the ISM‐band service, and the validity of the proposed design is verified by electromagnetic numerical simulation and physical realization. The simulation and measurement of the fabricated 1D array antenna show nearly 19 and 16 dBi, respectively as high gains. The stacked structure as a 2D array generate the titled beam moving from ?35° to 35° with the antenna gain from 17 to 20 dBi for a varying angle.     

Gain and bandwidth enhancements of sequential‐fed circularly polarized patch antenna array using multiple parasitic elements

This paper presents a circularly polarized (CP) antenna array with wideband operation and high gain characteristics. The single array element is composed of a slotted CP patch and parasitic elements. It has been found that besides improving the operating bandwidth (BW), properly choosing a number of parasitic elements can also contribute to a significant increase in the antenna gain over the entire operating band. For further boost in the performance, multiple array elements are arranged in 2 × 2 configuration and fed by a sequential‐phase feeding network. In comparison with the related works in the literature, the proposed design shows approximately 3‐dB higher gain. The design concept has been validated by experiments. The fabricated array has a measured operating BW of 28% (4.6‐6.1 GHz) and a peak broadside gain of 15.8 dBic.     

Bandwidth‐enhancement of circularly‐polarized fabry‐perot antenna using single‐layer partially reflective surface

In this article, we investigate bandwidth‐enhancement of a circularly‐polarized (CP) Fabry‐Perot antenna (FPA) using single‐layer partially reflective surface (PRS). The FPA is composed of a single‐feed truncated‐corner square patch antenna, which is covered by the PRS formed by a square aperture array. We revealed that the finite‐sized PRS produces extra resonances and CP radiations for the antenna system, which broadened the impedance matching and axial ratio (AR) bandwidths significantly. For verification, a broadband CP FPA prototype operating near 5.8 GHz was realized and tested. The fabricated antenna with overall size of 125 mm × 125 mm × 23.5 mm achieves a |S₁₁| < ?10 dB bandwidth of 31.7% (5.23‐7.2 GHz), an AR < 3‐dB bandwidth of 13.7% (5.45‐6.25 GHz), the peak gain of 13.3 dBic, a 3‐dB gain bandwidth of 22.38% (5.0‐6.26 GHz), and a radiation efficiency of >91%.     

A compact and wideband array antenna with efficient hybrid feed network

This study presents a high‐efficient, compact, and broadband microstrip patch antennas (MPAs) based on substrate‐integrated waveguide (SIW) for X‐band applications. The proposed array consists of three stacked layers from top to bottom, including one layer as the antenna layer and two SIW layers as a feeding network. The performance was focused on improving the impedance bandwidth and radiation efficiency by mitigating the loss from the feed network while also maintaining the compact design. To this end, the SIW feeding network was designed to feed the MPA to save the physical aperture size which resulted in a more compact and efficient radiating structure. The overall size of the proposed array is compact and extra surface area around the radiation aperture has not been occupied. The measured ?10 dB impedance bandwidth span is from 8.9 to 10.9 GHz (20.2%). The maximum measured gain at 10.6 GHz is 10.6 dBi. The results show that the simulated radiation efficiency and the measured aperture efficiency are more than 75% and 50%, respectively. The fabricated array exhibits great advantages such as wide operating bandwidth, lightweight, low‐cost, high aperture efficiency, high radiation efficiency, and compactness which make it a good candidate for X‐band applications.