Electric‐field‐driven LC lens for 3‐D/2‐D autostereoscopic display

Abstract— The use of an electric‐field‐driven liquid‐crystal (ELC) lens cell for switching between a 3‐D and 2‐D display is proposed. Due to the phase retardation of the non‐uniform LC directors, an ELC lens functions the same as a geometric lens. The parameters of an ELC for 3‐D applications are optimized through the simulation of the electrode configuration and voltage levels. A prototype was made where the ELC lens is placed in front of a liquid‐crystal display (LCD) 15 in. on the diagonal with a 99‐μm subpixel pitch. Under zero voltage, the ELC lens is a transparent medium and the users can see a clear 2‐D image. In 3‐D mode, the ELC lens array performs the same as a cylindrical lens array to the incident vertical polarization under suitable driving voltages. Placing a half‐wave plate between the LCD and ELC lens is proposed to change the polarization of the LCD to be parallel with the polarization lens direction of the ELC lens. The measurement of the horizontal luminance profile, performance of the ELC lens, and feasibility for 3‐D/2‐D switching was verified. The fabrication process for the ELC lens is compatible with the current LCD production process and enables the accurate control of the lens pitch of the ELC lens.     

Design of multi‐beam antenna based on Rotman lens

A planar Rotman lens antenna that generates multiple beams is presented over a wide angular range. The proposed multi‐beam antenna consists of a Rotman lens and a ten‐element printed Yagi antenna array. By properly comparing optical aberrations, expressing as the normalized path length errors Δl, the suitable ratio of on‐axis to off‐axis focal length (g = G/F) is acquired so as to minimize phase errors for the array elements. Ten dummy ports are employed to reduce the performance deterioration caused by energy reflection. A prototype with seven input ports was fabricated and measured, covering a wide scanning angle of 60° (–30°, 30°). The measured beam patterns show that the seven beam gains are distributed from 11.9 to 13.6 dBi under operating of 8.15 GHz. Both the simulated and measured results are used to verify the design approach.     

2‐D/3‐D switchable autostereoscopic display with multi‐electrically driven liquid‐crystal (MeD‐LC) lenses

Abstract— A cylindrical multi‐electrically driven liquid‐crystal lens (MeD‐LC lens) is proposed to extend the range of focusing. The MeD‐LC lens could be applied to switching 2‐D and 3‐D images by supplying a specific operating voltage on each electrode. Therefore, the MeD‐LC lens has less cross‐talk than that of a conventional LC lens. Furthermore, the simplified structure of a MeD‐LC lens with a homogeneous LC layer is much easier for fabrication without a LC‐alignment issue.     

Resolution enhancement of integral‐imaging three‐dimensional display using directional elemental image projection

Abstract— A new approach to resolution enhancement of an integral‐imaging (II) three‐dimensional display using multi‐directional elemental images is proposed. The proposed method uses a special lens made up of nine pieces of a single Fresnel lens which are collected from different parts of the same lens. This composite lens is placed in front of the lens array such that it generates nine sets of directional elemental images to the lens array. These elemental images are overlapped on the lens array and produce nine point light sources per each elemental lens at different positions in the focal plane of the lens array. Nine sets of elemental images are projected by a high‐speed digital micromirror device and are tilted by a two‐dimensional scanning mirror system, maintaining the time‐multiplexing sequence for nine pieces of the composite lens. In this method, the concentration of the point light sources in the focal plane of the lens array is nine‐times higher, i.e., the distance between two adjacent point light sources is three times smaller than that for a conventional II display; hence, the resolution of three‐dimensional image is enhanced.     

Fabrication of pinhole/micro‐lens array for improving resolution of integral imaging 3‐D display

In this paper, we present a new fabrication of micro‐lens array (MLA) with pinhole array—pinhole/micro‐lens array (P/MLA) for integral imaging 3‐D display (II), which combine lithography and ink‐jet printing. A black circular groove array (BCGA) is used as pinhole array, and laser 3‐D microscope and a homemade setup have been used for the characterization of P/MLA. The results show that high‐precision P/MLA can be obtained using BCGA as templates. By controlling the driving voltage at different steps, the distance between nozzle and substrate, as well as the number of liquid droplets, P/MLA with smooth morphology, different sizes, good repeatability of geometry parameters, great uniformity of focusing, and good converging performance can be achieved. For demonstration, P/MLA with curvature, focal length, numerical aperture, and F‐number of 815.8 μm, 1.60 mm, 0.1311, and 3.8 are applied for the reconstruction in II, exhibiting good reconstruction performance with high resolution, and BCGA reduces the influence of stray light on II and improves the quality of the reconstructed image.     

Maximizing electro‐optic performances in the fringe‐field switching liquid crystal mode with negative dielectric anisotropic liquid crystal

The fringe‐field switching (FFS) mode that uses liquid crystals (LCs) with negative dielectric anisotropy is used in high‐resolution FFS liquid crystal display owing to its higher transmittance over positive LC, although its response time becomes slow and operating voltage (V_op) becomes high. In the device, reduction of the cell gap is required to achieve fast response time, which results in increase in V_op in general. In this paper, we propose the FFS mode with electrode width 1 µm and distance between the electrodes 1.5 µm. In such an electrode structure, V_op decreases with decreasing cell gap to 2 µm so that a proper V_op, high LC's light efficiency of 90%, a high color temperature, and a fast response time less than 10 ms, can be achieved, which maximizes electro‐optic performance of the FFS mode.     

Nematic liquid‐crystal technology for Si wafer‐based reflective spatial light modulators

Various nematic LC modes are reviewed and compared in terms optical throughput, driving voltage, response time, contrast ratio, and spectral responses for LCoS applications. The effects of fringe‐field‐induced disclination on display performance and the mechanism of slow response of the disclination line between two topologically non‐equivalent LC states will be discussed. Issues involving flicker and photo‐instability of LCoS displays will be addressed as well.     

Feed and loss effects in spherical lens antennas for satellite communications

The hemispherical lens antenna is a candidate for satellite communications‐on‐the‐move, offering good scan performance in a reduced height. A short focal length minimizes height but presents challenges in illuminating the lens. Aperture efficiency is dominated by both the primary feed and dielectric loss. Feed effects are investigated in a threefold approach: spherical wave theory, commercial solver, and measurements. Gain and loss in a 432 mm diameter polyethylene/polystyrene lens are also measured. Gain for a waveguide‐fed array of two lenses is 36.3, 38.8, and 41.1 dBi, respectively, at 12.5, 20, and 30 GHz. The performance of a proposed four‐element array of equivalent area is then estimated.     

Novel liquid‐crystal materials for AMLCDs

Abstract— We have developed novel liquid‐crystal (LC) materials with a difluoromethyleneoxy CF₂O) moiety as the linkage group in order to satisfy the various requirements of active‐matrix liquid‐crystal displays (AMLCDs). We measured the physical properties of the CF₂O LC materials. The novel CF₂O LC materials have excellent physical properties, that is, high dielectric anisotropy, low viscosity, a broad nematic range, high reliability, etc. It was revealed that several advantages can be obtained by the introduction of CF₂O moiety into the LC molecules. The mixture containing CF₂O LC materials for various applications indicated a decrease in rotational viscosity of about 15–25% compared with that for conventional LC mixtures. Also, these novel mixtures with CF₂O LCM demonstrated a higher voltage‐holding ratio (VHR). It was confirmed that mixtures containing CF₂O LC materials have suitable characteristics for various applications, for example, low‐driving‐voltage note‐book PCs, quick response monitors, and transflective applications.     

Electro‐optical characteristics of ion‐beam‐aligned FFS‐LCDs on diamond‐like‐carbon thin film

Abstract— A fringe‐field‐switching (FFS) mode cell having LC alignment has been developed by using a non‐rubbing method, a ion‐beam‐alignment method on a‐C:H thin film, to analyze the electro‐optical characteristics of this cell. The suitable inorganic thin film for FFS‐LCDs and the alignment capabilities of nematic liquid crystal (NLC) have been studied. An excellent voltage‐transmittance (V‐T) and response‐time curve for the ion‐beam‐aligned FFS‐LCDs were observed using oblique ion‐beam exposure on DLC thin films.     

LC GRIN lens mode with wide viewing angle for rotatable 2D/3D tablet

To widen the vertical and horizontal angular ranges where the lens performs well, the off‐axis performance of a liquid crystal gradient index (LC GRIN) lens is analyzed by the combined simulation system of an LC director simulator and a ray‐tracing simulator. We found that the angular difference between an LC alignment direction and an electrode array direction of the LC GRIN lens is one of significant parameters, and detailed conditions of structure are established. The measurement result shows that the developed structure reduces the degradation ratio in a luminance profile from 61% to 3.2%. We have applied a user tracking system for the rotatable 3D display, equipped with a detection of a panel orientation and a face position. As a result, we have developed a rotatable 2D/3D tablet whose 3D viewing azimuth angle is over 30° in both landscape and portrait orientations.     

A new LCL-lens array with electrodes of interlaced structure to be applied for auto-stereoscopic 3D displays

A new design of the liquid crystal lenticular (LCL) lens array with interlaced electrodes is proposed to realize an auto-stereoscopic 3D display. The structure of interlaced electrodes aims to generate a desired non-uniform electric filed to improve the focusing ability of the LCL-lens array with lower voltage drives. This paper is organized as first to describe the design criteria of a lenticular lens sheet for wide extended graphics array LCD panel. Based on the designed lenticular lens array, an LCL-lens array with proposed interlaced electrodes is next designed. The fabrication and the detailed structure are given. A series of experiments are then conducted and successfully verify the focusing capability and desired 3D display functions, that is, to separate two images to right and left eyes. Also, the developed auto-stereoscopic 3D display is able to adapt to varied viewer locations with favorable imaging quality.     

A lightweight multi‐beam cylindrical Luneberg lens antenna loaded with multiple dielectric posts

A multi‐beam cylindrical Luneberg lens antenna loaded with multiple light dielectric posts for the purpose of light weight is presented. The antenna is based on a parallel‐plate waveguide and specifically composed of 10 E‐shaped patch antennas feeds, 2 parallel plates, and 491 epoxy posts. The equivalent gradient index of the Luneberg lens antenna is realized via the positions of the epoxy posts between the parallel plates. The features of low‐profile height (0.55λ) and large radiating area (4.4 × 0.55λ²) of the cylindrical Luneberg lens result in wide beamwidth in elevation plane and high gain while operating at 4 GHz. Consequently, the 3 dB beamwidth in the elevation plane is >65°. Furthermore, the multi‐beams cover a wide scan angle of 120° in the azimuth plane. The measured aperture efficiency of the fabricated lens antenna is above 50% from 3.9 to 4.3 GHz. In addition to the good radiation performance, features of light weight and ease of fabrication have also been demonstrated for the proposed lens antenna.     

Prototyping and optical evaluation of 9‐in. OCB time‐division‐multiplexing 18‐view 3‐D display

Abstract— An integral imaging time‐division‐multiplexing 18‐view 3‐D display based on the one‐dimensional integral‐imaging (1‐D‐II) technique using a 9‐in. OCB‐LCD, lenticular sheet, and active shutter has been developed. By simulating a lens shape and a shutter structure and analyzing the light‐beam profile of the increasing‐parallax‐number region to find the best conditions, depth range, and viewing angle were an enhanced and a brighter and flicker‐less 3‐D image with smooth motion parallax was obtained.     

Fast‐response liquid‐crystal displays using crossed fringe fields

Abstract— A fast‐response and wide‐view liquid‐crystal display (LCD) using the crossed fringe‐field‐switching (CFFS) mode is proposed, where the fringe‐field electrodes exist on both the top and bottom substrates. The bottom fringe field is used to turn on the LC directors and the top fringe field is used to assist in the LC decay process. The decay time is reduced by ～2× compared to that of the conventional FFS mode between the full bright and dark states, and more than a 2× improvement is obtained for other gray‐scale transitions. This CFFS mode also preserves the wide‐view characteristics as the conventional FFS mode. Its applications to LCD TVs and monitors for reducing image blur are addressed.     

Polarization‐independent and electrically tunable liquid‐crystal Fresnel lenses based on photoalignment in dye‐doped liquid crystals

Abstract— This work demonstrates polarization‐independent and electrically tunable liquid‐crystal (LC) Fresnel lenses based on photoalignment in dye‐doped liquid crystals (DDLCs). The LC alignments in the adjacent odd and even zones of the LC Fresnel lens are orthogonally hybrid alignments. Those are generated by surface treatment of homeotropic and homogeneous alignment layers, and the dye‐adsorption layer onto the UV‐cured surface‐relief Fresnel zone plate. The maximum focusing efficiency (～34.14%) of the fabricated LC Fresnel lens by applying a suitable AC voltage is close to the maximal theoretical focusing efficiency of a binary phase LC Fresnel lens (～40.5%). Additionally, the focusing efficiency is polarization‐independent and electrically tunable.     

A 5‐in. flexible ferroelectric liquid‐crystal display driven by organic thin‐film transistors

Abstract— An organic thin‐film‐transistor (OTFT) driven color flexible ferroelectric‐liquid‐crystal (FLC) display with 160 × 120 pixels and a resolution of 50 ppi has been developed. The flexible FLC was fabricated on a pentacene‐OTFT array using printing and lamination techniques. To drive the display at a fast driving speed, an OTFT was developed with a short channel length having a large current output. The fabricated OTFT array with a channel length of 5 μm exhibits a carrier mobility of 0.3 cm²/V‐sec and an ON/OFF ratio of over 10⁷ at a low drain voltage of ?6 V. A field‐sequential‐color system with a flexible backlight unit was also developed and used to drive the display. Color moving images were successively shown on the 5‐in. display using an active‐matrix driving technique of the OTFT.     

A novel gate driver circuit for depletion‐mode a‐IGZO TFTs

In this paper, a novel gate driver circuit, which can achieve high reliability for depletion mode in a‐InGaZnO thin‐film transistors (TFTs), was proposed. To prevent the leakage current paths for Q node effectively, the new driving method was proposed by adopting the negative gate‐to‐source voltage (V_GS) value for pull‐down units. The results showed all the V_OUT voltage waveforms were maintained at VGH voltage despite depletion‐mode operation. The proposed circuit could also obtain stable V_OUT voltage when the threshold voltage for all TFTs was changed from ?6.5 to +11.5 V. Therefore, the circuit can achieve high reliability regardless of threshold voltage value for a‐IGZO TFTs. In addition, the output characteristics and total power consumption were shown for the alternating current (AC)–driven and direct current (DC)–driven methods based on 120‐Hz full‐HD graphics (1920 × 1080) display panel. The results showed that the AC‐driven method could achieve improved V_OUT characteristics compared with DC‐driven method since the leakage current path for Q node can be completely eliminated. Although power consumption of the AC‐driven method can be slightly increased compared with the DC‐driven method for enhancement mode, consumption can be lower when the operation has depletion‐mode characteristics by preventing a leakage current path for pull‐down units. Consequently, the proposed gate driver circuit can overcome the problems caused by the characteristics of a‐IGZO TFTs.     

A single‐cell‐gap transflective blue‐phase liquid crystal display based on fringe in‐plane switching electrodes

A transflective blue‐phase liquid crystal display (TRBP‐LCD) based on fringe in‐plane switching (FIS) electrodes is proposed. The proposed structure generates combined fringe and in‐plane electric fields that cause more liquid crystal (LC) molecules to reorient almost in plane above and between the pixel electrodes. The fringe field is mainly generated in the transmissive (T) region, and the horizontal electric field is mainly generated in the reflective (R) region. By optimizing the width of the pixel electrodes and the gap between two adjacent pixel electrodes, the different electric field intensity in the T and R regions contribute to balance the optical phase retardation between the T and R regions. As a result, the proposed TRBP‐LCD exhibits a low operating voltage and high optical efficiency, while it preserves a relatively simple fabrication process.     

A novel miniaturized metamaterial lens antenna

This article develops a flat, miniaturized lens based on metamaterial for antenna gain improvement. The overall size of the lens is 1.9λ₀ × 1.9λ₀ × 0.05λ₀ . The distance between the metamaterial lens and the antenna is only about 0.4λ₀ . The prototype lens antenna is fabricated and the measured results are in agreement with the simulated results. It shows that the proposed lens provides significant gain enhancement by 2 to 3.5 dB between 1.3 and 1.45 GHz, which effectively demonstrate a high directivity, miniaturized, and compact metamaterial lens antenna.