共查询到20条相似文献，搜索用时 0 毫秒
1.
This study involvesthe numerical modeling of steady thermal radiation and chemical reaction on non-Newtonian fluid motion via a bidirectional stretching surface. We have taken convective boundary conditions, and heat sources on the stretching surface. The working fluid of the present study is Casson fluid (“non-Newtonian”) with couple stress. The self-similarity forms of the nonlinear thermal radiative flow model are obtained by using similarity variables. Furthermore, the numerical results are computed with the help of fourth-order Runge–Kutta–Fehlberg method with a shooting algorithm after reducing nonlinear partial differential equations have been translated into strong ordinary differential equations (ODEs). Impacts of the various flow physical parameters especially Biot number, nonlinear thermal radiation, and heat source parameters containing nonlinear ODEs are discussed in detail for distinct numerical values. A comparison of calculated results with the known numerical results made with the previously published literature is mentioned and obtained a good agreement. Finally, we found that the (“coefficient of skin friction”) declines along directions, respectively, with via while the opposite direction follows with respect to and the (“heat transfer rate”), (“mass transfer rate”) increase with via while opposite direction follows with respect to . 相似文献
2.
We introduce a model that precisely accounts the flow of fluid of Casson nanofluid over a stretched surface with activation energy and analyze entropy generation. The model is an attempt to investigate heat transfer and entropy generation in the laminar boundary layer near a stagnation point. The modified Arrhenius function for activation energy is used. Here, the flow of the fluid is subjected to nonlinear thermal radiation, viscous disipation, binary chemical reaction, and external magnetic field. The coupled nonlinear system is further validated using the spectral lineralization method. The method is found to be accurate and convergent. The results show that the Reynolds number and Casson parameter have a significant effect in entropy generation. 相似文献
3.
A steady two‐dimensional Casson nanofluid flow over the permeable stretching/shrinking sheet along the viscous dissipation and the chemical reaction is studied in this article. The convective boundary condition is incorporated in energy equation. Similarity variables are applied to convert the governing partial differential equations into ordinary differential equations. The numerical solutions of the equations are obtained by using the shooting method with Maple implementation. The numerical findings indicate occurrence of the dual solutions for a certain range of stretching/shrinking and suction parameters. Therefore, a stability analysis is done to find the solution that is stable and physically realizable. The effects of the pertinent physical parameters on velocity, temperature, and concentration profiles are investigated graphically. Numerical results of various parameters involved for skin friction coefficient, the local Nusselt as well as Sherwood numbers are determined and also discussed in detail. The Casson and suction parameters decrease the velocity in the first solution, whereas they increase it in the second solution. The rate of heat transfer increases in both solutions with an increment in Eckert number, Biot number, thermophoresis, and Brownian motion parameters. Thermophoresis and Brownian motion parameters show opposite behavior in the nanoparticle's concentration. The nanoparticle concentration decreases in both solutions with increment in Schmidt number, Brownian motion, and chemical reaction parameters. 相似文献
4.
The emphasis on non-Newtonian fluid encountered in biomedical, pharmaceuticals, mining, food, chemical, and plastics industries and in noticeably enormous diverse industrial applications influenced this article. This study is accomplished in a non-Darcy porous stretching surface to investigate the stagnation point of bioconvective Casson nanofluid. Chemical reaction, applied consistent magnetic field, radiative heat transfer, and buoyancy force consequences are studied for numerical examination. Composed of nonlinear partial differential equations for the above presumptions and reforming them into ordinary differential equations by means of compatible transformations are enforced. Adopting the fifth order Runge–Kutta Felhberg method with the shooting technique obtained a numerical solution. Obtained solutions are authenticated by comparing previous solutions. The major finding includes the reduction of the Casson parameter on the skin friction coefficient. 相似文献
5.
The current study aims to study the magnetohydrodynamics (MHD) Casson kind nanofluid stream through a permeable medium above a nonlinear extending surface considered along with Darcy-Forchimer relation and chemical reaction. Thermophoresis and Brownian diffusion effects are considered. The MHD effect is used to highlight the physical and thermal properties of the nanofluid. The Keller Box scheme is used to solve the guiding equations numerically. Graphs are plotted for various nondimensional parameters. To justify the method, the used local parameters are calculated and compared with the existing literature. The results specify that a decreasing tendency is observed in the velocity profile for Forchiemer, magnetic, and stretching rate parameters, whereas the opposite tendency is noted for the Casson parameter. On observing temperature profiles, declination is noticed for Casson, thermal slip parameters and raising nature is detected for increasing values of Brownian diffusion, and thermophoresis, radiation parameters. From the results, it is observed that the momentum boundary layer diminishes for a higher inertial influence and the opposing force offered by the porous media to the fluid flow. 相似文献
6.
In the present study, we investigate the velocity, thermal, solutal, and motile micro‐organism (MM) slip effects on the flow of chemically reactive Casson nanofluid flowing over an exponentially stretched electromagnetic sheet in the presence of a chemical reaction. In addition, a mechanism of improving the motion of nanoparticles (Brownian motion and thermophoresis) is incorporated. The nondimensionalized ordinary differential equations are tackled by using symbolic computation software, MATLAB 2012b, with bvp4c function. Some significant and relevant characteristics of associated profiles are displayed graphically and discussed beautifully with the aid of tables through comprehensive numerical computations. The results of the study show that elevated Casson fluid parameter, gyrotactic micro‐organism, and electromagnetic strength belittle both axial as well as transverse velocities and the related momentum boundary layer thickness. Another important outcome is that low Prandtl fluids and enhancement in the strength of electromagnetic field fasten the diffusion of micro‐organisms, thereby augmenting the density of MM in the related boundary layer. 相似文献
7.
The present article investigates the influence of Joule heating and chemical reaction on magneto Casson nanofluid phenomena in the occurrence of thermal radiation through a porous inclined stretching sheet. Consideration is extended to heat absorption/generation and viscous dissipation. The governing partial differential equations were transformed into nonlinear ordinary differential equations and numerically solved using the Implicit Finite Difference technique. The article analyses the effect of various physical flow parameters on velocity, heat, and mass transfer distributions. For the various involved parameters, the graphical and numerical outcomes are established. The analysis reveals that the enhancement of the radiation parameter increases the temperature and the chemical reaction parameter decreases the concentration profile. The empirical data presented were compared with previously published findings. 相似文献
8.
On the account of industrial and technological applications, the enhancement of energy by inserting nanoparticles is a hot topic in the present century. Therefore, the current analysis presents a theoretical analysis regarding the flow of electrically conducted Maxwell nanofluid over a stretching surface in the presence of the gyrotactic microorganism. In addition, the influence of thermal conductivity and Arrhenius activation energy are considered. By using the apposite transformation, the system of contemporary partial differential expressions is first converted into nonlinear ordinary differential system. The set of these transmuted equations is solved with the help of the shooting method. Reliable results are obtained for the velocity profile, temperature, motile microorganism density and concentration. It is evaluated that by increasing the value of bioconvection Peclet and Lewis numbers, the microorganism distribution exhibited diminishing behavior. These results may be useful in improving the efficiency of heat transfer devices and microbial fuel cells. 相似文献
9.
The current article focuses on mass and thermal transfer analysis of a two-dimensional immovable combined convective nanofluid flow including motile microorganisms with temperature-dependent viscosity on top of a vertical plate through a porous medium, and a model has been developed to visualize the velocity slip impacts on a nonlinear partial symbiotic flow. The governed equations include all of the above physical conditions, and suitable nondimensional transfigurations are utilized to transfer the governed conservative equations to a nonlinear system of differential equations and obtain numerical solutions by using the Shooting method. Numerical studies have been focusing on the effects of intricate dimensionless parameters, namely, the Casson fluid parameter, Brownian motion parameter, thermophoresis parameter, Peclet number, bioconvection parameter, and Rayleigh number, which have all been studied on various profiles such as momentum, thermal, concentration, and density of microorganisms. The concentration boundary layer thickness and density of microorganisms increased as the Casson fluid parameter, Brownian and thermophoresis parameters increased, whereas the bioconvection parameter, Peclet number, and Rayleigh number increased. The thermal boundary layer thickness, concentration boundary layer thickness, and density of microorganisms all decreased. The velocity distribution decreases as the Peclet number, bioconvection, and thermophoresis parameters rise but rises as the Rayleigh number, Brownian motion parameter, and Casson fluid parameter rise. These are graphed via plots along with divergent fluid parameters. 相似文献
10.
This paper addresses the effects of axisymmetric magnetohydrodynamic stagnation point flow of nanofluid through the lubrication of power‐law fluid by taking the general slip at the interfacial condition. The impacts of radiated chemical reaction, thermophoresis, and Brownian motions are further accounted. The fluid is impinging orthogonally on the surface via power‐law slim coating liquid lubrication. The partial differential system is governed for both the lubricant and the base fluid. Using dimensional analysis, the arisen partial differential system is modified to ordinary differential systems subject to nonlinear boundary conditions. An implicit numerical technique namely the Keller‐Box method is executed to formulate the solution of developed nonlinear expressions. The influence of different involved constraints on quantities of interest are sketched and discussed. The effects of the skin friction coefficient, heat transfer, and concentration rate at the surface are given and analyzed. The condition from full slip to the no‐slip can be achieved from the present solution. The obtained solutions are matched through the existing data and observed good agreement. 相似文献
11.
It is worth remarking that little is known about generalized differential quadrature analysis of three‐dimensional flow of non‐Newtonian Casson fluid in the presence of Lorentz force, thermal radiation, haphazard motion of tiny particles, thermomigration of these tiny particles due to temperature gradient, heat source, significant conversion of kinetic energy into internal energy, first‐order chemical reaction, convectively heated horizontal wall, and zero nanoparticles mass flux at the stretching surface. The revised form of Buongiorno's nanofluid model accounted for significant influences of Brownian motion and thermophoresis. The similarity solution was complemented with a powerful collocation procedure based on the generalized differential quadrature method and Newton–Raphson iterative scheme to achieve accuracy and convergent outcomes. The numerical effects disclose that the Casson nanofluid parameter slows down the axial velocities in both directions. Also, the unsteadiness parameter tends to decline generally the temperature throughout the medium and decrease particularly the concentration profile away from the stretching surface. These examinations are applicable in the field of biomechanics, polymer processing, and for characterizing the cement slurries. 相似文献
12.
The nonlinear convection study on the flow of a dissipative Casson nanofluid through a porous medium of an inclined micro-annular channel is presented. The cylindrical surfaces were conditioned to temperature increase and velocity slip effects. A uniform magnetic field strength was applied perpendicular to the cylinder surface. The heat source and Darcy number influence are explored in the examination of the blood rheological model (Casson) through the annular cylinder. Appropriate dimensionless variables are imposed on the dimensional equations encompassing Casson nanofluid rheology through an annular microchannel. The resulting systems of equations were solved and computed numerically via Chebyshev-based collocation approach. Thus, the solutions of flow distributions, volumetric flow rate, and other flow characteristics were obtained. The result shows that both nonlinear convection parameters decrease the nanoparticle volume fraction, whereas they increase the energy and momentum distributions. Moreover, the volumetric flow rate is upsurged significantly by a wider porous medium, annular gap, a higher Casson parameter, and nonlinear convection influence. 相似文献
13.
This investigation focuses on the influence of thermal radiation on the magnetohydrodynamic flow of a Williamson nanofluid over a stretching sheet with chemical reaction. The phenomena at the stretching wall assume convective heat and mass exchange. The novelty of the present study is the thermodynamic analysis in the nonlinear convective flow of a Williamson nanofluid. The resulting set of the differential equations are solved by the homotopy analysis method. We explored the impacts of the emerging parameters on flow, heat, and mass characteristics, including the rate of entropy generation and the Bejan number through graphs, and extensive discussions are provided. The expressions for skin friction, Nusselt and the Sherwood numbers are also analyzed and explored through tables. It is concluded that the rate of mass transfer may be maximized with the variation of the Williamson and chemical reaction parameters. Moreover, the entropy generation rate and the Bejan number are augmented via increasing the Williamson parameter. 相似文献
14.
Manasa Manjari Biswal Kharabela Swain Gouranga Charan Dash Swetapadma Mishra 《亚洲传热研究》2023,52(1):333-353
Nanoparticle (NP) delivery is an exciting and rapidly developing field that adequately takes care of thermal radiation in blood flow and is likely to have bearing on the therapeutic procedure of hyperthermia, blood flow, and heat transfer in capillaries. The NP parameters such as size, shape, and surface characteristics can be regulated to improve nano-drug delivery efficiency in biological systems. The NPs outperform traditional drug delivery processes in drug carrying capacity and controlled release. The current article investigates the boundary layer flow and heat transfer of thermally radiative Casson nanofluid (NF) over a stretching sheet with chemical reaction and internal heat source. In our study, Cu and Al2O3 are taken as NPs in a suitable base fluid. The problem is analyzed by using similarity transformations and is solved with MATLAB's built-in solver bvp4c. The effects of pertinent parameters characterizing the flow model are presented through graphs and tables. The important findings of the investigation are noted as: the use of metallic oxide is more beneficial to attain higher temperature within a few layers close to the bounding surface; the appearance of convexity and concavity in the concentration profile attributed to flow instability, and the constructive and destructive heterogeneous reactions at the bounding surface have distinct roles to modify the NF flow in the boundary layer. 相似文献
15.
The Buongiorno model Maxwell nanofluid flow, heat and mass transfer characteristics over a stretching sheet with a magnetic field, thermal radiation, and chemical reaction is numerically investigated in this analysis. This model incorporates the effects of Brownian motion and thermophoresis. The governing partial differential equations are transformed into a coupled nonlinear ordinary differential equation by using the similarity transformation technique. The resultant nonlinear differential equations are solved by using the Finite element method. The sketches of velocity, temperature and concentration with diverse values of magnetic field parameter (0.1 ≤ M ≤ 1.5), Deborah number (0.0 ≤ β ≤ 0.19), radiation parameter (0.1 ≤ R ≤ 0.7), Prandtl number (0.5 ≤ Pr ≤ 0.8), Brownian motion parameter (0.1 ≤ Nb ≤ 0.7), thermophoretic parameter (0.2 ≤ Nt ≤ 0.8), Chemical reaction parameter (1.0 ≤ Cr ≤ 2.5) and Lewis number (1.5 ≤ Le ≤ 3.0) have investigated and are depicted through plots. Moreover, the values of the Skin-friction coefficient, Nusselt number, and Sherwood numbers are also computed and are shown in tables. The sequels of this analysis reviewed that the values of Skin-friction coefficient and Sherwood number intensified with hiked values of Deborah number (β), whereas, the values of Nusselt number decelerate as values of (β) improves. 相似文献
16.
Md Faisal Md Basir Muhammad Bilal Rakesh Choudhary Joby Mackolil B. Mahanthesh Kottakkaran S. Nisar 《亚洲传热研究》2021,50(6):5439-5466
The impact of Stefan blowing on the MHD bioconvective slip flow of a nanofluid towards a sheet is explored using numerical and statistical tools. The governing partial differential equations are nondimensionalized and converted to similarity equations using apposite transformations. These transformed equations are solved using the Runge–Kutta–Fehlberg method with the shooting technique. Graphical visualizations are used to scrutinize the effect of the controlling parameters on the flow profiles, skin friction coefficient, local Nusselt, and Sherwood number. Moreover, the sensitivities of the reduced Sherwood and Nusselt number to the input variables of interest are explored by adopting the response surface methodology. The outcomes of the limiting cases are emphatically in corroboration with the outcomes from preceding research. It is found that the heat transfer rate has a positive sensitivity towards the haphazard motion of the nanoparticles and a negative sensitivity towards the thermomigration. The thermal field is enhanced by the Stefan blowing aspect. Moreover, the fluid velocity can be controlled by the applied magnetic field. 相似文献
17.
A numerical computation to analyze the heat and mass transfer mechanism of a magnetohydrodynamic radiative Casson fluid flow over a wedge in the presence of Joule heating, viscous dissipation, and chemical reaction is carried out in this study. The flow-governing partial differential equations are transformed as ordinary differential equations by relevant similarity transformations and subsequently resolved by Runge–Kutta numerical approach with a shooting technique. The characteristics of momentum, thermal, and concentration border layers due to various influencing parameters are graphically outlined and numerically computed by MATLAB software. We present comparative solutions to construe the relative outcomes of Casson fluid versus Newtonian fluid. Computational outcomes of friction factor and Nusselt and Sherwood numbers are tabulated with suitable interpretations. An increase in skin friction values is noted due to an increment in the thermal Grashof number, whereas a decrease is observed due to the chemical reaction parameter. The Casson fluid displays a superior heat transfer mechanism than the Newtonian fluid. Obtained outcomes are in good agreement with the prevailing literature in the limiting case. 相似文献
18.
Flow phenomena of three-dimensional conducting Casson fluid through a stretching sheet are proposed in the present investigation with the impact of the magnetic parameter in a permeable medium. The adaptation of particular transformations is useful to modify the governing equations into their nondimensional as well as the ordinary form. However, these transformed equations are nonlinear and approximate analytical methods for the solution of the complex form of governing equations. In particular, the Adomian decomposition method is proposed for the solution. The behavior of several variables, such as the magnetic and porous matrix, on the flow profile as well as the rate of shear stress, are discussed via graphs and tables. The conformity of the current result with the earlier study shows a road map for further investigation. The major concluding remarks are; the retardation in the velocity distribution is rendered due to an increase in the Casson parameter moreover, the Casson parameter favors in reducing the rate of shear stress coefficient in magnitude. 相似文献
19.
The mixed convection of a nanofluid flow past an inclined wavy surface in the existence of gyrotactic microbes is considered. To convert the wavy surface to a plane surface, a transformation of coordinates is applied. The governing equations that are nonlinear and the accompanying boundary conditions are converted into a dimensionless form using pseudo-similarity variables. Using a local linearization process, the system of nonlinear partial differential equations is linearized. The resulting system is solved using the Bivariate Chebyshev pseudo-spectral collocation method. The influence of different physical and geometrical factors on the parameters of engineering importance of the flow is analyzed and illustrated graphically. It is observed that the skin friction, the density of motile microorganisms, and nanoparticle mass transfer rate are increasing with an increase in the bioconvection Peclet and Schmidt numbers whereas these quantities are decreasing with an increase in Rayleigh number. The local Nusselt number, nanoparticle Sherwood number, and density number of microbes increases with an increase in the Brownian motion and thermophoresis parameter. These physical quantities are increasing when the surface changes from horizontal to vertical. 相似文献
20.
Nanofluids are special functional fluids, which are designed to reduce the loss of energy and maximize the transport of heat. The thermophoresis and Brownian motion of the particle are important factors in the transport of heat in these fluids. The rise in heat transport shows encouraging effects in control of dissipation of energy and reduces entropy generation. In the current study, two-dimensional non-Newtonian Casson nanofluid flow on an upper horizontal surface of a parabola is investigated. The impact of catalytic surface chemical reactions has been account also due to its industrial importance. For this flow problem, the governing equations are modeled using the law of conservation of mass, momentum, heat, and concentration equation. The fitting transformations are taken to change governing couple partial differential equations and domain into local similar ordinary differential equation and domain of [0,∞). Using the \"RK4\" approach with Newton's shooting schemes via MATLAB tools, the numerical solution of dimensionless governing equations is sorted. It is observed that the Casson fluid parameter caused a drop in temperature profile, and the chemical reaction parameter is the source of the rise in the temperature field. 相似文献