Adsorption of Hg(II) ions from aqueous chloride solutions using powdered activated carbons

Activated carbons were developed from Casurina equisetifolia leaves, by chemically treating with sulfuric acid (1:1) or zinc chloride (25%), at low (425 °C) and high (825 °C) temperatures. The resulting powdered activated carbons were applied for removing mercuric ions from aqueous solution at different agitation times and mercuric ion concentrations. The equilibrium data fitted well the Langmuir adsorption isotherm. The Langmuir adsorption capacities were 12.3 and 20.3 mg g⁻¹ for low temperature carbons and 43.9 and 38.5 mg g⁻¹ for high temperature carbons impregnated with H₂SO₄ and ZnCl₂, respectively. Studies of the effects of carbon dosage, NaCl concentrations and solution pH values were carried out for the more effective, high temperature carbons. Increasing NaCl concentration resulted in a significant decrease in the adsorption efficiency. Adsorption was high from solutions with low and neutral pH values and lower for solutions with alkaline pH values for the high temperature carbons.     

Mercury (II) adsorption by activated carbon made from sago waste

The preparation of activated carbon (AC) from sago industry waste is a promising way to produce a useful adsorbent for Hg (II) removal, as well as dispose of sago industry waste. The AC was prepared using sago industry waste with H₂SO₄ and (NH₄)₂S₂O₈ and physico-chemical properties of AC were investigated. Adsorptive removal of mercury (II) from aqueous solution onto AC prepared from sago industry waste has been studied under varying conditions of agitation time, metal ion concentration, adsorbent dose, particle size and pH to assess the kinetic and equilibrium parameters. Adsorption equilibrium was obtained in 105 min for 20 mg l⁻¹ and 120 min for 30, 40, and 50 mg l⁻¹ Hg (II) concentrations. The Langmuir and Freundlich equilibrium isotherm models were found to provide an excellent fitting of the adsorption data, with r² 0.9999 and 0.9839, respectively. The adsorption capacity of Hg (II) (Q_o) obtained from the Langmuir equilibrium isotherm model was found to be 55.6 mg g⁻¹ at pH 5.0 for the particle size range of 125-250 μm. The percent removal increased with an increase in pH from 2 to 10. This adsorbent was found to be effective and economically attractive.     

Kinetic and equilibrium studies of Pb(II) and Cd(II) removal from aqueous solution onto colemanite ore waste

The adsorption characteristics of Pb(II) and Cd(II) onto colemanite ore waste (CW) from aqueous solution were investigated as a function of pH, adsorbent dosage, contact time, and temperature. Langmuir, Freundlich and Dubinin-Radushkevich (D-R) models were applied to describe the adsorption isotherms. Langmuir model fitted the equilibrium data better than the Freundlich isotherm. The adsorption capacity of CW was found to be 33.6 mg/g and 29.7 mg/g for Pb(II) and Cd(II) ions, respectively. Analyte ions were desorbed from CW using both 1 M HCl and 1 M HNO₃. The recovery for both metal ions was found to be higher than 95%. The mean adsorption energies evaluated using the D-R model indicated that the adsorption of Pb(II) and Cd(II) onto CW were taken place by chemisorption. The thermodynamic parameters (ΔG^o, ΔH^o and ΔS^o) showed that the adsorption of both metal ions was feasible, spontaneous and exothermic at 20-50 °C. Adsorption mechanisms were also investigated using the pseudo-first-order and pseudo-second-order kinetic models. The kinetic results showed that the adsorption of Pb(II) and Cd(II) onto CW followed well pseudo-second order kinetics.     

The use of exhausted olive cake ash (EOCA) as a low cost adsorbent for the removal of toxic metal ions from aqueous solutions

The removal characteristics of cadmium (Cd(II)) and nickel (Ni(II)) ions from aqueous solution by exhausted olive cake ash (EOCA) were investigated under various conditions of contact time, pH, initial metal concentration and temperature. Batch kinetic studies showed that an equilibrium time of 2 h was required for the adsorption of Ni(II) and Cd(II) onto EOCA. Equilibrium adsorption is affected by the initial pH (pH₀) of the solution. The pH₀ 6.0 is found to be the optimum for the individual removal of Cd(II) and Ni(II) ions by EOCA. The adsorption test of applying EOCA into synthetic wastewater revealed that the adsorption data of this material for nickel and cadmium ions were better fitted to the Langmuir isotherm since the correlation coefficients for the Langmuir isotherm were higher than that for the Freundlich isotherm. The estimated maximum capacities of nickel and cadmium ions adsorbed by EOCA were 8.38 and 7.32 mg g⁻¹, respectively. The thermodynamic parameters for the adsorption process data were evaluated using Langmuir isotherm. The free energy change (ΔG°) and the enthalpy change (ΔH°) showed that the process was feasible and endothermic respectively. As the exhausted olive cake is discarded as waste from olive processing, the adsorbent derived from this material is expected to be an economical product for metal ion remediation from water and wastewater.     

Adsorption behaviors of mercury from aqueous solution using sulfur-impregnated adsorbent developed from coal

Adsorption of mercury from aqueous solution on sulfur-impregnated adsorbent has been studied. Raw coal was mixed with K₂S powder, and then heated at 800-1000 °C for 30 min in nitrogen to produce sulfur-impregnated adsorbent. The sulfur content and specific surface area of the adsorbent were determined, and the ability of the adsorbent to adsorb mercury in aqueous solution was examined. With increasing temperature of sulfur-impregnation, specific surface area of the adsorbent increases, while sulfur content of the adsorbent is almost constant. The adsorbent obtained at 900 °C shows the highest and fastest adsorption of mercury from aqueous solution at 25 °C, and the elution extents of adsorbed mercury are negligible in distilled water and 10% in 0.1 M HCl solution, respectively. Adsorption kinetics was tested for pseudo-first order and pseudo-second order reactions, and the rate constants of adsorption for these kinetic models were calculated. Adsorption experiments demonstrate that the adsorption process corresponds to pseudo-second-order kinetic model than pseudo-first-order model. With increasing temperature of aqueous solution, the kinetics of adsorption becomes faster and the amount of mercury adsorbed on the adsorbent increases. The thermodynamic values, ΔG⁰, ΔH⁰ and ΔS⁰, indicated that adsorption was an endothermic and spontaneous process.     

Effect of porous structure and surface functionality on the mercury capacity of a fly ash carbon and its activated sample

The effect of porous structure and surface functionality on the mercury capacity of a fly ash carbon and its activated sample has been investigated. The samples were tested for mercury adsorption using a fixed‐bed with a simulated flue gas. The activated fly ash carbon sample has lower mercury capacity than its precursor fly ash carbon (0.23 vs. 1.85 mg/g), although its surface area is around 15 times larger, 863 vs. 53 m²/g. It was found that oxygen functionality and the presence of halogen species on the surface of fly ash carbons may promote mercury adsorption, while the surface area does not seem to have a significant effect on their mercury capacity.     

Removal of Cu(II) from aqueous solutions by recycled tire rubber

A batch adsorption system was applied to study the adsorption of Cu(II) ions from aqueous solutions by crumb rubber. The effects of pH ranging from 1.5 to 7.0, contact time ranging from 6 to 96 h and initial metal concentration ranging from 1 mg L^− 1 to 50 mg L^− 1 on the removal of Cu(II) were studied. Results show that adsorption of Cu(II) is pH-dependent and the best results are obtained at pH = 6.0. Results also show that copper uptake is accompanied by displacement of zinc and therefore probably involves an ion exchange type mechanism. Langmuir and Freundlich adsorption models were applied to describe the isotherms and isotherm constants. Equilibrium data agreed very well with the Langmuir model. Results clearly show that crumb rubber is an effective adsorbent for the removal of Cu(II) from aqueous solutions.     

Preparation of activated carbon derived from Jatropha curcas fruit shell by simple thermo-chemical activation and characterization of their physico-chemical properties

High surface area activated carbons were prepared by simple thermo-chemical activation of Jatropha curcas fruit shell with NaOH as a chemical activating agent. The effects of the preparation variables, which were impregnation ratio (NaOH:char), activation temperature and activation time, on the adsorption capacity of iodine and methylene blue solution were investigated. The activated carbon which had the highest iodine and methylene blue numbers was obtained by these conditions as follows: 4:1 (w/w) NaOH to char ratio, 800 °C activation temperature and 120 min activation time. Characterization of the activated carbon obtained was performed by using scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and nitrogen adsorption isotherm as BET. The results present that the activated carbon possesses a large apparent surface area (S_BET = 1873 m²/g) and high total pore volume (1.312 cm³/g) with average pore size diameter of 28.0 Å.     

Production of fibrous activated carbons from natural cellulose (jute, coconut) fibers for water treatment applications

Different fibrous activated carbons were prepared from natural precursors (jute and coconut fibers) by physical and chemical activation. Physical activation consisted of the thermal treatment of raw fibers at 950 °C in an inert atmosphere followed by an activation step with CO₂ at the same temperature. In chemical activation, the raw fibers were impregnated in a solution of phosphoric acid and heated at 900 °C in an inert atmosphere. The characteristics of the fibrous activated carbons were determined in the following terms: elemental analysis, pore characteristics, SEM observation of the porous surface, and surface chemistry. As the objective of this study was the reuse of waste for industrial wastewater treatment, the adsorption properties of the activated carbons were tested towards pollutants representative of industrial effluents: phenol, the dye Acid Red 27 and Cu²⁺ ions. Chemical activation by phosphoric acid seems the most suitable process to produce fibrous activated carbon from cellulose fiber. This method leads to an interesting porosity (S_BET up to 1500 m² g⁻¹), which enables a high adsorption capacity for micropollutants like phenol (reaching 181 mg g⁻¹). Moreover, it produces numerous acidic surface groups, which are involved in the adsorption mechanisms of dyes and metal ions.     

Removal of chromium (VI) from dilute aqueous solutions by activated carbon developed from Terminalia arjuna nuts activated with zinc chloride

Different structured activated carbons were prepared from Terminalia arjuna nuts, an agricultural waste, by chemical activation with zinc chloride for the adsorption of Cr(VI) from dilute aqueous solutions. The most important parameter in chemical activation was found to be the chemical ratio (activating agent/precursor, g/g). Carbonization temperature and time are the other two important variables, which had significant effect on the pore structure of carbon. A high surface area of was obtained at a chemical ratio of 300%, carbonization time and temperature of 1 h and 500 °C, respectively. The activated carbon developed shows substantial capability to adsorb Cr(VI) from dilute aqueous solutions. The parameters studied include pH, adsorbent dosage, contact time, and initial concentrations. The kinetic data were best fitted to the Lagergren pseudo-first-order model. The isotherm equilibrium data were well fitted by the Langmuir and Freundlich models. The maximum removal of chromium was obtained at pH 1.0 (about 99% for adsorbent dose of 2 g/l and 10 mg/l initial concentration).     

Adsorption of Cu(II) ions from aqueous solutions on modified chrysotile: Thermodynamic and kinetic studies

The adsorption of Cu(II) ions by modified chrysotile from aqueous solution was investigated under different experimental conditions. The Langmuir and Freundlich equations were introduced to describe the linear forms about the adsorption of Cu(II) ions on the surface of modified chrysotile, and it was found that the adsorption equilibrium process was well described by the Langmuir isotherm model with the maximum adsorption capacity of 1.574 mmol/g at 333 K. The thermodynamic parameters (ΔG⁰, ΔH⁰ and ΔS⁰) for adsorption on modified chrysotile were also determined from the temperature dependence. The influences of specific parameters such as temperature, pH value and initial concentration for the kinetic studies were also examined. The adsorption follows a pseudo-second order rate law.     

An electroanalytical application of 2-aminothiazole-modified silica gel after adsorption and separation of Hg(II) from heavy metals in aqueous solution

2-Aminothiazole covalently attached to a silica gel surface was prepared in order to obtain an adsorbent for Hg(II) ions having the following characteristics: good sorption capacity, chemical stability under conditions of use, and, especially, high selectivity. The accumulation voltammetry of mercury(II) was investigated at a carbon paste electrode chemically modified with silica gel functionalized with 2-aminothiazole (SIAMT-CPE). The repetitive cyclic voltammogram of mercury(II) solution in the potential range −0.2 to +0.6 V versus Ag/AgCl (0.02 mol L⁻¹ KNO₃; v=20 mV s−1) show two peaks one at about 0.1 V and other at 0.205 V. The anodic wave peak at 0.205 V is well defined and does not change during the cycles and it was therefore further investigated for analytical purposes using differential pulse anodic stripping voltammetry in differents supporting electrolytes. The mercury response was evaluated with respect to pH, electrode composition, preconcentration time, mercury concentration, “cleaning” solution, possible interferences and other variables. The precision for six determinations (n = 6) of 0.02 and 0.20 mg L⁻¹ Hg(II) was 4.1 and 3.5% (relative standard deviation), respectively. The detection limit was estimated as 0.10 μg L⁻¹ mercury(II) by means of 3:1 current-to-noise ratio in connection with the optimization of the various parameters involved and using the highest-possible analyser sensitivity.     

Arsenic adsorption using copper (II) oxide nanoparticles

Arsenic poisoning is a major problem in today's life. To reduce its concentration in drinking water, different metal based compounds were explored as arsenic adsorbents. In the present study, copper (II) oxide nanoparticles were prepared by thermal refluxing technique and used as an adsorbent for arsenic removal from water. Characterization of the adsorbent using TEM, BET, XRD and FTIR implied that the prepared adsorbent was in nano size and had excellent adsorption behavior with surface area of 52.11 m²/g. Systematic adsorption experiments were carried out with different process parameters such as contact time, adsorbent mass, pH, temperature and stirring speed and found that copper (II) oxide had very good efficiency towards arsenic adsorption. Thermodynamic parameters and adsorption kinetics were studied in detailed to know the nature and mechanism of adsorption. Results showed that the adsorption process followed pseudo second order kinetic and endothermic behavior. Adsorption equilibrium was studied with Langmuir and Freundlich isotherm models. The adsorption process followed Langmuir isotherm with an adsorption capacity of 1086.2 μg/g. A regeneration study was proposed in order to reuse the adsorbent for better economy of the process. Finally, a process design calculation is reported to know the amount of adsorbent required for efficient removal of arsenic from aqueous medium.     

Removal of elemental mercury from coal combustion flue gas by chloride-impregnated activated carbon

In this work, adsorption of vapour-phase elemental mercury (Hg⁰) from pulverised-coal combustion flue gas by commercially available granular activated carbons treated with zinc chloride (ZnCl₂) impregnation was investigated. The experiment results showed that ZnCl₂ impregnation significantly enhanced the adsorptive capacity for mercury vapour, but decreased the specific surface area of the activated carbon. This could be explained by the occurrence of chemisorption, which was confirmed by adsorption tests over a wide range of temperatures. The influence of ZnCl₂ solution concentration on the mercury removal performance was also studied. Mechanisms of mercury adsorption onto the Cl-impregnated activated carbon were proposed.     

Adsorption of zinc, cadmium and mercury ions from aqueous solutions on an activated carbon cloth

The adsorption of zinc, cadmium and mercury ions from aqueous solutions on an activated carbon cloth was studied as a function of their concentrations and solution pH. For that purpose, pertinent adsorption isotherm data was collected at different pH values. The amount of adsorbed zinc and cadmium ions increases while the amount of adsorbed mercury remains constant with an increase in the equilibrium pH of the solution. The adsorption mechanisms of metal ions on activated carbon cloth are discussed. Under the conditions investigated, these primarily involve adsorption of monovalent cations (Zn and Cd) or precipitation of metal hydroxides (Cd and Hg) on the activated carbon cloth tested.     

Removal of plant poisoning dyes by adsorption on Tomato Plant Root and green carbon from aqueous solution and its recovery

The organic dyes directly pollute the soil, water, plants and all living systems in the environment. The dyes like cationic Methylene blue (MB) and Crystal violet (CV) adsorption has been studied on Tomato Plant Root powder (TPR) and green carbon from aqueous solution for identifying the plant poisoning nature of cationic dyes. TPR powder is a cellulose material and green carbon is prepared from TPR powder by an ecofriendly method. The dyes adsorption mechanism on basic surface of cellulose and neutral surface of green carbon are correlated to evaluate the plant poisoning nature of organic dyes. The adsorption parameters were optimized to maximum adsorption. The maximum uptake of both dyes on TPR was 97% at 15 min and on carbon is 18% (CV) & 20% (MB) at 30 min. The adsorptions of MB and CV on TPR powder followed Freundlich and Langmuir adsorption isotherms and pseudo second order kinetics. The ?S^o, ?H^o and ?G^o of adsorption on TPR are calculated. The dyes recovery has been studied from dyes adsorbed TPR and green carbon. The adsorption mechanism and dye recovery studies proved the plant poisoning nature of MB and CV.     

Preparation of granular activated carbon from oil palm shell by microwave-induced chemical activation: Optimisation using surface response methodology

In this study, waste palm shell was used to produce activated carbon (AC) using microwave radiation and zinc chloride as a chemical agent. The operating parameters of the preparation process were optimised by a combination of response surface methodology (RSM) and central composite design (CCD). The influence of the four major parameters, namely, microwave power, activation time, chemical impregnation ratio and particle size, on methylene blue (MB) adsorption capacity and AC yield were investigated. Based on the analysis of variance, microwave power and microwave radiation time were identified as the most influential factors for AC yield and MB adsorption capacity, respectively. The optimum preparation conditions are a microwave power of 1200 W, an activation time of 15 min, a ZnCl₂ impregnation ratio of 1.65 (g Zn/g precursor) and a particle size of 2 mm. The prepared AC under the optimised condition had a BET surface area (S_BET) of 1253.5 m²/g with a total pore volume (V_tot) of 0.83 cm³/g, which 56% of it was contributed to the micropore volume (V_mic).     

Insights into the simultaneous chronopotentiometric stripping measurement of indium(III), thallium(I) and zinc(II) in acidic medium at the in situ prepared antimony film carbon paste electrode

The simultaneous measurement of microgram per liter concentration levels of indium(III), thallium(I) and zinc(II) at the antimony film carbon paste electrode (SbF-CPE) is demonstrated. The antimony film was deposited in situ on a carbon paste substrate electrode and employed in chronopotentiometric stripping mode in deoxygenated solutions of 0.01 M hydrochloric acid (pH 2). The chronopotentiometric stripping performance of the SbF-CPE was studied and compared with constant current chronopotentiometric stripping and anodic stripping voltammetric operation. In comparison with its bismuth and mercury counterparts, the SbF-CPE exhibited advantageous electroanalytical performance; namely, at the bismuth film electrode, the measurement of zinc(II) was practically impossible due to hydrogen evolution, whereas the mercury film electrode exhibited a poorly developed signal for thallium(I). The SbF-CPE revealed favorable calculated LoDs (3σ) of 1.4 μg L⁻¹ for thallium(I) and 2.4 μg L⁻¹ for indium(III) along with good linear response in the examined concentration range from 10 to 100 μg L⁻¹ with correlations coefficients (R²) of 0.992 for thallium(I) and 0.994 for indium(III) associated with a 120 s deposition time. The chronopotentiometric stripping performance of the SbF-CPE was characterized also by satisfactory reproducibility of 1.62% for indium(III), 3.96% for thallium(I) and 2.11% for zinc(II) (c = 40 μg L⁻¹, n = 11).     

Sorption of Al (III) from aqueous solution by fresh macrophyte alligator weed: Equilibrium and kinetics

The removal of Al (III) ions from aqueous solution by locally abundantly low-cost fresh macrophyte, alligator weed, was examined in batch system. Effect of initial solution pH on Al (III) adsorption was investigated and the Al (III) species present in aqueous solution were identified. The main functional groups of the alligator weed were characterized by Fourier transform infrared spectrometer (FT-IR). The equilibrium data fitted to Freundlich and Langmuir isotherms satisfactorily. The pseudo-second-order equation fitted the kinetic data very well. The intraparticle diffusion played an important role in the Al (III) sorption process. Al (III) ions were favorably adsorbed by alligator weed and the values of K_f and 1/n (Freundlich constant) at 25 °C and pH 3.5 were found as 1.9963 (mg/g)/(mg/L)^1/n and 0.7875, respectively, which are comparable to those of granular activated carbon (2.20 (mg/g)/(mg/L)^1/n and 0.8695, respectively).     

Hexavalent chromium adsorption on superparamagnetic multi-wall carbon nanotubes and activated carbon composites

Hexavalent chromium (Cr(VI)) adsorption from aqueous solutions on magnetically modified multi-wall carbon nanotubes (M-MWCNT) and activated carbon (M-AC) was investigated. M-MWCNT and M-AC were prepared by co-precipitation method with Fe²⁺:Fe³⁺ salts as precursors. The magnetic adsorbents were characterized by X-ray diffraction (XRD), thermogravimetric analysis (TGA) and scanning electron microscope (SEM). The effects of amount of adsorbents, contact time, initial pH, temperature and the initial concentration of Cr(VI) solution were determined. The adsorption equilibrium, kinetics, thermodynamics and desorption of Cr(VI) were investigated. Equilibrium data fitted well with the Langmuir isotherm for both of the adsorbents. The theoretical adsorption capacities are 14.28 mg/g of M-MWCNT and 2.84 mg/g of M-AC. Cr(VI) adsorption kinetics was modeled with pseudo-second order model, intra-particle diffusion model and Bangham model. Thermodynamic parameters were calculated and ΔG°, ΔH° and ΔS° indicate that the adsorption of Cr(VI) onto M-MWCNT and M-AC was exothermic and spontaneous in nature. Results revealed that M-MWCNT is an easily separated effective adsorbent for Cr(VI) adsorption from aqueous solution.