共查询到20条相似文献,搜索用时 78 毫秒
1.
1应用状况
70年代以后,随着交流电机矢量控制理论的产生及其应用技术的推广,世界工业发达国家都投入大量人力物力对交交变频轧钢机主传动进行研究。在工业发达国家新建1000kW以上的轧机主传动,无论是初轧机,中板轧机还是热、冷连轧机,无一例外全部采用交流变频调速。在大功率轧钢机主传动领域已出现交流调速传动取代直流传动的趋势。 相似文献
2.
大功率交流电机变频调速是大型机械传动的关键设备,也是当前节能减排的重点推广技术。本文介绍了我国在大功率交交变频调速技术的研究和国产化装备的研制工程中,丰富并完善了大功率交流调速理论,形成了自主创新的核心技术,解决了大功率交流调速装备的多项关键技术,推动国产交流调速装备步入国际先进行列,立足工程,取得显著的经济效益和社会效益。文章还介绍了我国第一套7.5MW三电平IGCT交直交变频调速系统的研制,该变频器结构紧凑、性能良好、运行可靠,达到国际先进水平。 相似文献
3.
本文介绍了一种由8098单片机为主控制器的交流变频调速系统,它采用交-直-交变频技术,具有成本低廉,可靠性高,组配灵活等特点,适用于各种工业现场的中小型交流电动机,文章详细论述了系统的硬件结构及软件设计,并给出了主要程序的流程图。 相似文献
4.
交-交变频和TDC控制器在济钢1700热连轧主传动中的应用 总被引:1,自引:0,他引:1
本文针对济钢1700热连轧主传动介绍了TSIEMENS交-交变频矢量控制的原理、应用及实现,重点讲述了在矢量控制中电流模型的构成、电流调节器设计及交-交变频主回路的构成和工作原理,并对SIMOVERT-D系统各处理器的功能设计和TDC控制器的应用进行了介绍。 相似文献
5.
6.
轧机的电机功率大,干扰严重,其调速精度难以控制.文章提出的数字控制调速技术先进、可靠,解决了上述问题。变频对电网的谐波采取了滤波措施。对于变频调速的设计应用具有很大参考价值。 相似文献
7.
基于小波包的故障信号特征提取的研究 总被引:2,自引:0,他引:2
讨论了交--交变频调速系统故障诊断的重要性,在当前的检测方法与故障诊断手段研究的基础上,提出了一种改进的小波包算法,并运用该算法对变频调速系统输出电流进行分析.该算法的计算量和占用的存储空间较标准的小波包算法均减少80%.同时,运用基于改进的小波包的频带能量法提取变频调速系统的故障特征,分析了小波包分解层次对特征量提取的影响.经过仿真证明,该方法适用于变频调速系统故障信号的特征量提取. 相似文献
8.
讨论了交-交变频调速系统故障诊断的重要性,在当前的检测方法研究的基础上,提出了基于DSP和小波分析的变频调速系统故障检测方法,建立了故障诊断系统;充分利用了DSP强大的数据处理功能,以及小波分析所具有的对非平稳信号的分析处理能力;实验证明该方法适用于变频调速系统的故障诊断。 相似文献
9.
10.
本文介绍涤伦短丝后处理联合机主传动,由直流调速系统改造为变频调速系统的结构组成,主回路工作原理,变频参数设置,可编程控制系统设计及此系统常见故障的分析及处理方法。 相似文献
12.
本文针对陕西龙钢集团轧钢厂棒材厂旋流池水系统高压水泵、净环水泵与棒材加热炉空烟风机、煤烟风机、高线加热炉煤烟风机、空烟风机、助燃风机上的8台高压变频器的应用情况进行了介绍,并对其控制系统、设备的现场安装、散热等进行了分析和介绍,可供参考。 相似文献
13.
Wen-Jung Ho Mu-Shen Lin Wu-Shiung Feng 《Electronics letters》1996,32(17):1529-1530
A new topology for the single-phase PFC-pre-staged AC/DC/AC converter is presented. The introduction of a common-neutral connection simplifies the conventional connection of an AC/DC/AC structure, and gives a new topology that still has good performance, conforms with output safety regulations and has other advantages such as requiring fewer power devices and having lower conduction losses 相似文献
14.
Jong-Hyun Kim Byung-Duk Min Bong-Hwan Kwon Sang-Chul Won 《Industrial Electronics, IEEE Transactions on》1998,45(5):832-835
A novel pulsewidth modulation buck-boost AC chopper using regenerative DC snubbers is proposed and analyzed. Compared to the previous buck-boost AC choppers, AC snubbers causing power loss are eliminated using regenerative DC snubbers. Experimental results show that the proposed scheme gives good steady-state performance of the AC chopper, which coincides with the theoretical results 相似文献
15.
针对热连轧机组中同步电动机主传动的交-交变频调速系统,定量分析了同步电机负载经由交交变频器对变压器供电网侧产生的谐波影响.分别对不同的负载参数、变压器原副边电感量和变流装置的进线电抗器参数的情况进行了仿真分析.同时,对大型多组交交变频器移相组合式供电进行了数据移位方式仿真.并且对交-交变频器和交-直-交变频器所产生的谐波干扰进行了对比分析.仿真结果表明调节变压器原副边电感量再结合移相组合式供电的方法可以有效地降低大型同步机负载对供电网侧的谐波干扰,并使得总谐波率在各相中分布趋向均衡. 相似文献
16.
Bong-Hwan Kwon Gang-Youl Jeong Sung-Hoon Han Duk-Ho Lee 《Industrial Electronics, IEEE Transactions on》2002,49(5):1110-1119
In this paper, a novel pulsewidth-modulated line conditioner with fast output voltage control is proposed. The line conditioner is made up of an AC chopper with reversible voltage control and a transformer for series voltage compensation. In the AC chopper, a proper switching operation is achieved without the commutation problem. To absorb energy stored in line stray inductance, a regenerative DC snubber can be utilized which has only one capacitor without discharging resistors or complicated regenerative circuit for snubber energy. Therefore, the proposed AC chopper gives high efficiency and reliability. The output voltage of the line conditioner is controlled using a fast sensing technique of the output voltage. It is also shown via some experimental results that the presented line conditioner gives good dynamic and steady-state performance for high quality of the output voltage. 相似文献
17.
The one well-known one-dimensional method for calculating the AC resistance of multilayer transformer windings contains a built-in orthogonality which has not been reported previously. Orthogonality between skin effect and proximity effect makes a more generalized approach for the analytical solution of AC resistance in windings possible. This includes a method to calculate the AC resistance of round conductor windings which is not only convenient to use, but gives more accurate answers than the basic one-dimensional method because the exact analytical equations for round conductors can be used 相似文献
18.
Intel XScale音频设备驱动设计 总被引:1,自引:0,他引:1
Intel XScale系列处理器包含AC'97控制单元.本文通过介绍AC'97音频系统及PXA255音频接口硬件实现,并研究linux 2.6内核的新特色——ALSA音频驱动体系结构,最后得以实现PXA255 ALSA驱动. 相似文献
19.
弹道目标的翻滚运动特征是进行弹道目标识别比较有效的特征之一,对弹道目标的翻滚运动特征进行分析及其应用研究,以期为弹道目标识别算法的设计提供线索和参考.简要介绍了弹道目标识别的相关原理,采用数据建模和计算机仿真的研究方法,基于目标翻滚特征分析结论着重对圆柱体这类理想空间目标模型在翻滚运动姿态下进行了应用研究,对观测角度和抽样点数的选取进行了详细的仿真分析,并给出了结论. 相似文献
20.
H2 inferential filtering, prediction, and smoothing withapplication to rolling mill gauge estimation
A new minimum mean square error optimal linear estimation problem is considered where no direct measurement of the output to be estimated is available. The optimal filter, predictor, and smoother are derived for this case where outputs must be inferred from available measurements. The results cover the usual Wiener or Kalman filtering problems and also optimal deconvolution estimation problems. However, they also apply to the situation, often found in industry, where estimates of signals are required that can only be determined from secondary measurements. A weighted H2 cost-function is minimized where the weighting function can be chosen to improve the robustness of the solution. The optimal estimators are derived both for stable and for unstable signal source models. A signal-processing application is considered in detail to demonstrate the use of the optimal filter. The gauge control problem in metal rolling mills is discussed where only force measurements are available 相似文献