Picomolar peroxide detection using a chemically activated redox mediator and square wave voltammetry

A method for low-level, low-potential electrochemical detection of hydrogen peroxide using a chemically activated redox mediator is presented. This method is unique in that it utilizes a mediator, Amplex Red, which is only redox-active when chemically oxidized by H2O2 in the presence of the enzyme horseradish peroxidase (HRP). When employed in concert with microelectrode square wave voltammetry to optimize sensing at ultralow concentrations (<1 microM), this method exhibits marked improvements in analytical sensitivity and detection limits (limit of detection as low as 8 pM) over existing protocols. Sensing schemes incorporating both freely diffusing and immobilized HRP are evaluated, and the resulting analytical sensitivities are 1.22 +/- 0.04 and (2.1 +/- 0.6) x 10(-1) microA/(microM mm2), respectively, for peroxide concentrations in the high picomolar to low micromolar range. A second linear region exists for lower peroxide concentrations. Furthermore, quantitative enzyme kinetics analysis using Michaelis-Menten parameters is possible through interpretation of data collected in this scheme. Km values for soluble and immobilized HRP were 84 +/- 13 and 504 +/- 19 microM, respectively. This method is amenable to any biological detection scheme that generates hydrogen peroxide as a reactive product.     

Multiplexed electrochemical immunoassay of phosphorylated proteins based on enzyme-functionalized gold nanorod labels and electric field-driven acceleration

A multiplexed electrochemical immunoassay integrating enzyme amplification and electric field-driven strategy was developed for fast and sensitive quantification of phosphorylated p53 at Ser392 (phospho-p53(392)), Ser15 (phospho-p53(15)), Ser46 (phospho-p53(46)), and total p53 simultaneously. The disposable sensor array has four spatially separated working electrodes, and each of them is modified with different capture antibody, which enables simultaneous immunoassay to be conducted without cross-talk between adjacent electrodes. The enhanced sensitivity was achieved by a multienzyme amplification strategy using gold nanorods (AuNRs) as nanocarrier for coimmobilization of horseradish peroxidase (HRP) and detection antibody (Ab(2)) at a high ratio of HRP/Ab(2), which produced an amplified electrocatalytic response by the reduction of HRP oxidized thionine in the presence of hydrogen peroxide. The immunoreaction processes were accelerated by applying +0.4 V for 3 min and then -0.2 V for 1.5 min; thus, the whole sandwich immunoreactions could be completed in less than 5 min. Under optimal conditions, this method could simultaneously detect phospho-p53(392), phospho-p53(15), phospho-p53(46), and total p53 ranging from 0.01 to 20 nM, 0.05 to 20 nM, 0.1 to 50 nM, and 0.05 to 20 nM with detection limits of 5 pM, 20 pM, 30 pM, and 10 pM, respectively. Accurate determinations of these proteins in human plasma samples were demonstrated by comparison to the standard ELISA method. The disposable immunosensor array shows excellent promise for clinical screening of phosphorylated proteins and convenient point-of-care diagnostics.     

基于Si-NPA的WO3薄膜电容湿敏性能

采用匀胶旋涂技术将WO3溶胶沉积在硅纳米孔柱阵列(si-NPA)衬底上,经500℃退火制得WO3/Si-NPA复合薄膜.场发射扫描电镜和x射线衍射的表面形貌和结构分析表明,WO3在Si-NPA表面形成连续薄膜,且复合薄膜保持了Si-NPA规则阵列结构的特点.湿敏测试结果显示:在11%到95%的相对湿度范围内,WO3/Si-NPA湿敏元件输出电容强,且随测试频率的增加而单调降低;随着WO3薄膜厚度的增加,湿敏元件灵敏度明显增大,但元件相应的响应/恢复时间却延长.     

Polypyrrole nanorod networks/carbon nanoparticles composite counter electrodes for high-efficiency dye-sensitized solar cells

Polypyrrole(PPy) nanorod networks with a high electrical conductivity of 40 S cm(-1) have been obtained in a high yield by employing an ion association of heparin-methylene blue as a new morphology-directing agent. The polypyrrole nanorod networks are mixed with different content of carbon nanoparticles to make PPy nanorod networks/carbon nanoparticles(PPy/C) counter electrodes. It is found that the PPy/C composite with 10% carbon content shows a lower charge transfer resistance and better catalytic performance for the reduction of I(3)(-), compared with the pristine PPy and carbon electrodes. The better catalytic performance is attributed to the interaction of the superior electrocatalytic activity of the unique polypyrrole nanorod networks and the carbon nanoparticles, which can accelerate triiodide reduction and electron transfer in the electrode. Under standard AM 1.5 sunlight illumination, the dye-sensitized solar cell based on the PPy/C composite with 10% carbon content as the counter electrode demonstrates a high efficiency of 7.2%, which is much higher than that of pristine PPy and carbon electrode-based DSCs and comparable to that of the thermal decomposed Pt-based DSC.     

Preparation of porous titania sol-gel matrix for immobilization of horseradish peroxidase by a vapor deposition method

A new and facile vapor deposition method has been developed for the preparation of sol-gel matrix. This method was used to form a titania sol-gel thin film and to immobilize horseradish peroxidase (HRP) on a glassy carbon electrode surface for the production of an amperometric hydrogen peroxide biosensor. This process prevented the cracking of conventional sol-gel-derived glasses. The morphologies of both titania sol-gel and the enzyme membranes were characterized using scanning electron microscopy and proved to be chemically clean, porous, and homogeneous and to have a very narrow particle size distribution. The sol-gel-derived titania-modified electrode retained the enzyme bioactivity and provided for long-term stability of the enzyme in storage. In the presence of catechol as a mediator, the sensor exhibited a rapid electrocatalytic response (less than 5 s), a linear calibration range from 0.08 to 0.56 mM with a detection limit of 1.5 microM and a high sensitivity (61.5 microA mM(-1)) for monitoring of H2O2. Effects of pH and operating potential were also explored for optimum analytical performance by using the amperometric method. The apparent Michaelis-Menten constant of the encapsulated HRP was 1.89 +/- 0.21 mM.     

Performance of silver nanoparticles in the catalysis of the oxygen reduction reaction in neutral media: Efficiency limitation due to hydrogen peroxide escape

The electrocatalytic activity for oxygen reduction reaction (ORR) at neutral pH of citrate-capped silver nanoparticles (diameter = 18 nm) supported on glassy carbon (GC) is investigated voltammetrically. Novelly, the modification of the substrate by nanoparticles sticking to form a random nanoparticle array and the voltammetric experiments are carried out simultaneously by immersion of the GC electrode in an air-saturated 0.1 M NaClO₄ solution (pH = 5.8) containing chemically-synthesized nanoparticles. The experimental voltammograms of the resulting nanoparticle array are simulated with homemade programs according to the two-proton, two-electron reduction of oxygen to hydrogen peroxide where the first electron transfer is rate determining. In the case of silver electrodes, the hydrogen peroxide generated is partially further reduced to water via heterogeneous decomposition. Comparison of the results obtained on a silver macroelectrode and silver nanoparticles indicates that, for the silver nanoparticles and particle coverages (0.035%–0.457%) employed in this study, the ORR electrode kinetics is slower and the production of hydrogen peroxide larger on the glassy carbon-supported nanoparticles than on bulk silver.      

Integrated potentiometric detector for use in chip-based flow cells

A new kind of potentiometric chip sensor for ion-selective electrodes (ISE) based on a solvent polymeric membrane is described. The chip sensor is designed to trap the organic cocktail inside the chip and to permit sample solution to flow past the membrane. The design allows the sensor to overcome technical problems of ruggedness and would therefore be ideal for industrial processes. The sensor performance for a Ba2+-ISE membrane based on a Vogtle ionophore showed electrochemical behavior similar to that observed in conventional electrodes and microelectrode arrangements.     

Chemical imaging with combined fast-scan cyclic voltammetry-scanning electrochemical microscopy

Fast-scan cyclic voltammetry (FSCV) is applied to the tip of a scanning electrochemical microscope (SECM) for imaging the distribution of chemical species near a substrate. This approach was used to image the diffusion layer of both a large substrate electrode (3-mm-diameter glassy carbon) and a microelectrode substrate (10-microm-diameter Pt). Additionally, oxygen depletion near living cells was measured and correlated to respiratory activity. Finally, oxygen and hydrogen peroxide were simultaneously detected during the oxidative burst of a zymosan-stimulated macrophage cell. These results demonstrate the utility of FSCV-SECM for chemical imaging when conditions are chosen such that feedback interactions with the substrate are minimal.     

Optimal environment for glucose oxidase in perfluorosulfonated ionomer membranes: improvement of first-generation biosensors

An optimal environment for glucose oxidase (GOx) in Nafion membranes is achieved using an advanced immobilization protocol based on a nonaqueous immobilization route. Exposure of glucose oxidase to water-organic mixtures with a high (85-95%) content of the organic solvent resulted in stabilization of the enzyme by a membrane-forming polyelectrolyte. Such an optimal environment leads to the highest enzyme specific activity in the resulting membrane, as desired for optimal use of the expensive oxidases. Casting solution containing glucose oxidase and Nafion is completely stable over 5 days in a refrigerator, providing almost absolute reproducibility of GOx-Nafion membranes. A glucose biosensor was prepared by casting the GOx-Nafion membranes over Prussian Blue-modified glassy carbon disk electrodes. The biosensor operated in the FIA mode allows the detection of glucose down to the 0.1 microM level, along with high sensitivity (0.05 A M(-1) cm(-2)), which is only 10 times lower than the sensitivity of the hydrogen peroxide transducer used. A comparison with the recently reported enzyme electrodes based on similar H2O2 transducers (transition metal hexacyanoferrates) shows that the proposed approach displays a dramatic (100-fold) improvement in sensitivity of the resulting biosensor. Combined with the attractive performance of a Prussian Blue-based hydrogen peroxide transducer, the proposed immobilization protocol provides a superior performance for first-generation glucose biosensors in term of sensitivity and detection limits.     

Strontium-selective membrane electrodes based on some recently synthesized benzo-substituted macrocyclic diamides

Eight different recently synthesized macrocyclic diamides were studied to characterize their abilities as strontium ion carriers in PVC membrane electrodes. The electrode based on 1,13-diaza-2,3;11,12-dibenzo-4,7,10-trioxacyclopentadecane-14,15-dione exhibits a Nernstian response for Sr(2+) ions over a wide concentration range (1.0 × 10(-)(1)-3.2 × 10(-)(5) M) with a limit of detection of 8.0 × 10(-)(6) M (0.7 ppm). The response time of the sensor is ～10 s, and the membrane can be used for more than three months without observing any deviation. The electrode revealed comparatively good selectivities with respect to many alkali, alkaline earth, and transition metal ions. It was used as an indicator electrode in potentiometric titration of carbonate ions with a strontium ion solution.     

Synthesis of nickel oxides nanoparticles on glassy carbon as an electron transfer facilitator for horseradish peroxidase: Direct electron transfer and H2O2 determination

In this study, horseradish peroxidase/nickel oxides nanoparticles/glassy carbon (HRP/NiO NPs/GC) electrode was prepared by first applying nickel oxides nanoparticles on glassy carbon surface and then horseradish peroxidase immobilized on the NiO NPs. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) have been used as a diagnostic tools to identify the synthesized NiO NPs. Immobilized HRP showed an electrochemical redox behavior pertained to HRP(Fe(III)–Fe(II)) by direct electron transfer between protein and nanoparticles with a formal potential (E^0′) of ? 55.5 mV (vs. Ag/AgCl and 141.5 mV vs. NHE) in 50 mM phosphate buffer solution (PBS). The anodic charge transfer coefficient (α) and heterogeneous electron transfer rate constant (k_s) were 0.42 and 0.75 s^? 1, respectively. Biocatalytic activity of HRP/NiO NPs/GC electrode for reduction of hydrogen peroxide and application to hydrogen peroxide determination was exemplified.     

Synthesis of polypyrrole coated manganese nanowires and their application in hydrogen peroxide detection

This study focuses on the synthesis and application of polypyrrole coated manganese nanowires (Mn/PPy NWs) as an enzyme-less sensor for the detection of hydrogen peroxide (H₂O₂). The X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) results confirm a core–shell structure with the Mn nanowires encapsulated by the PPy. An electrochemical sensor based on the Mn/PPy NWs for amperometric determination of H₂O₂ is prepared. The electrochemical behaviour of H₂O₂ is investigated by cyclic voltammetry with the use of modified glassy carbon electrode (GCE) with Mn/PPy NWs film. The modified glassy carbon electrode (GCE) with Mn/PPy NWs shows enhanced amperometric response for the detection of H₂O₂. This is due to the high available surface area of Mn/PPy NWs which can provide a suitable area for the reaction of H₂O₂. The detection limit and limit of quantification (S/N = 3) for two linear segments (low and high concentration of H₂O₂) are estimated to be 2.12 μmol L⁻¹, 7.07 μmol L⁻¹ and 22.3 μmol L⁻¹, 74.5 μmol L⁻¹, respectively. In addition, the sensitivity for these two linear segments is 0.4762 μA mM⁻¹ and 0.0452 μA mM⁻¹ respectively.     

Nonconducting polymers on Prussian Blue modified electrodes: improvement of selectivity and stability of the advanced H/sub 2/O/sub 2/ transducer

An approach to improve the analytical performance of a Prussian Blue (PB)-based hydrogen peroxide transducer is described. In support of this objective, both the stabilizing and anti-interferent properties of nonconducting films were used. Electropolymerization on the top surface of PB modified electrodes is possible due to the high oxidizing ability of Berlin Green, and the growth of nonconductive polymers may be independently monitored by investigating the redox activity of the inorganic polycrystal. The best performance characteristics, which are advantageous over existing H/sub 2/O/sub 2/ sensors, were obtained for PB electrodes covered with electropolymerized o-phenylenediamine (1,2-diaminobenzene). The reported transducer remained at the 100% response state for more than 20 h under continuous flow of 0.1-mM hydrogen peroxide (flow rate 1 mlmin/sup -1/), which improves the stability level among the selective H/sub 2/O/sub 2/ sensors by one order of magnitude. The selectivity factor of the PB-poly (1,2-diaminobenzene) based transducer relative to ascorbate is nominally 600. PB-poly(1,2-diaminobenzene) modified electrode allows the detection hydrogen peroxide in the flow-injection mode down to 10/sup -7/ M with sensitivity of 0.3 AM/sup -1/cm/sup -2/, which is two times lower compared to the uncovered PB-based transducer.     

Scanning electrochemical microscopy. 44. Imaging of horseradish peroxidase immobilized on insulating substrates

Scanning electrochemical microscopy (SECM) was used to study horseradish peroxidase (HRP) immobilized with copolymer on insulating substrates (glass slide or polycarbonate membrane filter). Two methods were used to immobilize HRP: In the first, HRP was coimmobilized by cross-linking on a glass slide with a copolymer swelled in water to form a hydrogel; in the second, the same copolymer and avidin were coimmobilized on the glass slide and biotin-labeled HRP was conjugated to the avidin of the film. SECM was then used to detect the presence of the bound enzyme by observing the feedback current in a solution of benzoquinone and hydrogen peroxide, when hydroquinone was generated at the tip. A detection limit less than 7 x 10(5) HRP molecules within a approximately 7-microm-diameter area was demonstrated.     

GOD/PPy/GC电极的电化学性能研究

采用电沉积法在玻碳(GC)电极表面合成纳米级聚吡咯(PPy),通过扫描电镜得到PPy的形貌。以PPy为载体,通过吸附法固定葡萄糖氧化酶(GOD),得到GOD/PPy/GC电极。利用循环伏安法对GOD/PPy/GC电极的电化学行为进行分析,结果表明,以PPy为载体可以很好地固定GOD并保持其生物活性。在0.1mol/L磷酸盐缓冲溶液中,无任何电子媒介体存在时,GOD/PPy/GC电极显示了很好的电催化性能。     

Optical biosensor based on hollow integrated waveguides

The first absorbance biosensor based on pure silicon hollow integrated waveguides is presented in this work. With the use of horseradish peroxidase (HRP) as a model recognition element, an enzymatic sensor for the measurement of hydrogen peroxide was fabricated, numerically simulated, and experimentally characterized. Waveguides with widths ranging from 50 to 80 microm, having a depth of 50 microm and lengths up to 5 mm were easily fabricated by just one photolithographic step. These were further modified by covalent immobilization of HRP using silanization chemistry. Simulation studies of the proposed approach showed a sensor linear behavior up to 300 microM H2O2 and a sensitivity of 2.7 x 10(-3) AU/microM. Experimental results were in good agreement with the simulated ones. A linear behavior between 10 and 300 microM H2O2, a sensitivity of 3 x 10(-3) AU/microM, and a signal-to-noise ratio around 20 dB were attained. Also, kinetic studies of the activity of the immobilized enzyme on the silicon waveguide surface gave an apparent Michaelis-Menten constant of 0.44 mM. The simple technology proposed in this work enables the fabrication of cost-effective, easy-to-use, miniaturized biosensor generic platforms, these being envisioned as excellent candidates for the development of lab-on-a-chip systems.     

Cyanide detection using a substrate-regenerating, peroxidase-based biosensor

An enzyme-based, dual working electrode system is described for the sensing of cyanide. Horseradish peroxidase (HRP) is incorporated as the sensing element. A continuous monitoring of oxidative activity by the enzyme results through the generation and regeneration of substrates at the electrode surfaces. Thus, HRP is oxidized by hydrogen peroxide generated from dissolved oxygen, at the primary electrode, and then reduced through the secondary electrode by mediated electron transfer using ferrocene as a carrier. Ferrocene regeneration at this electrode is proportional to the intrinsic activity of HRP. The dynamics of the system are investigated by using a rotating ring-disk electrode. The enzyme is immobilized to provide better control over its catalytic activity and to increase the lifetime of the biosensor. Cyanide inhibition of current can be modeled by reversible binding kinetics. Detection of cyanide is possible in submicromolar (ppb) concentrations, with a half maximal response at 2 microM. The response time for detection of introduced cyanide is within 1 s. The sensor can be operated between 5 and 40 degrees C, and cyanide inhibition is unaffected by pH changes between 5 and 8. The sensor is reproducible for cyanide determination and is stable for over 6 months.     

Development of a detection sensor for lethal H2S gas

The gas which may be lethal to human body with short-term exposure in common industrial fields or workplaces in LAB may paralyze the olfactory sense and impose severe damages to central nervous system and lung. This study is concerned with the gas sensor which allows individuals to avoid the toxic gas that may be generated in the space with residues of organic wastes under 50 degrees C or above. This study investigates response and selectivity of the sensor to hydrogen sulfide gas with operating temperatures and catalysts. The thick-film semiconductor sensor for hydrogen sulfide gas detection was fabricated WO3/SnO2 prepared by sol-gel and precipitation methods. The nanosized SnO2 powder mixed with the various metal oxides (WO3, TiO2, and ZnO) and doped with transition metals (Au, Ru, Pd Ag and In). Particle sizes, specific surface areas and phases of sensor materials were investigated by SEM, BET and XRD analyses. The metal-WO3/SnO2 thick films were prepared by screen-printing method. The measured response to hydrogen sulfide gas is defined as the ratio (Ra/R,) of the resistance of WO3ISnO2 film in air to the resistance of WO3/SnO2 film in a hydrogen sulfide gas. It was shown that the highest response and selectivity of the sensor for hydrogen sulfide by doping with 1 wt% Ru and 10 wt% WO3 to SnO2 at the optimum operating temperature of 200 degrees C.     

A disposable amperometric sensor screen printed on a nitrocellulose strip: a glucose biosensor employing lead oxide as an interference-removing agent

A new type of disposable amperometric sensor is devised by screen printing thick-film electrodes directly on a porous nitrocellulose (NC) strip. The chromatographic NC strip is then utilized to introduce various sample pretreatment layers. As a preliminary application, a glucose biosensor based on hydrogen peroxide detection is constructed by immobilizing glucose oxidase (GOx) on the NC electrode strip and by formulating a strong oxidation layer (i.e., PbO2) at the sample loading area, placed below the GOx reaction band. The screen-printed PbO2 paste serves as a sample pretreatment layer that removes interference by its strong oxidizing ability. Samples applied are carried chromatographically, via the PbO2 paste, to the GOx layer, and glucose is catalyzed to liberate hydrogen peroxide, which is then detected at the electrode surface. The proposed NC/PbO2 strip sensor is shown to be virtually insusceptible to interfering species such as acetaminophen and ascorbic and uric acids and to exhibit good performance, in terms of the sensor-to-sensor reproducibility (standard deviation, +/-0.026 - +/-0.086 microA), the sensitivity (slope, -0.183 microA/mM), and the linearity (correlation coefficient, 0.994 in the range of 0-10 mM).     

质子交换膜恒电位式氢气传感器

利用质子交换膜为电解质,碳纸和铂黑分别为电极的扩散层和催化层,制作了恒电位式氢气传感器;确定的最佳施加电位是１．５Ｖ;在氢气浓度为０．２％内,氢气氧化电流与氢气浓度成正比;通过在工作电极前面加设聚乙烯膜,增大氢气扩散阻力,可以将氢气氧化电流与氢气浓度之间的线性关系提高到氢气浓度为１．５％。