Efficient non-doped monochrome and white phosphorescent organic light-emitting diodes based on ultrathin emissive layers

Efficient red, orange, green and blue monochrome phosphorescent organic light-emitting diodes (OLEDs) with simplified structure were fabricated based on ultrathin emissive layers. The maximum efficiencies of red, orange, green and blue OLEDs are 19.3 cd/A (17.3 lm/W), 45.7 cd/A (43.2 lm/W), 46.3 cd/A (41.6 lm/W) and 11.9 cd/A (9.2 lm/W). Moreover, efficient and color stable white OLEDs based on two complementary colors of orange/blue, three colors of red/orange/blue, and four colors of red/orange/green/blue were demonstrated. The two colors, three colors and four colors white OLEDs have maximum efficiencies of 30.9 cd/A (27.7 lm/W), 30.3 cd/A (27.2 lm/W) and 28.9 cd/A (26.0 lm/W), respectively. And we also discussed the emission mechanism of the designed monochrome and white devices.     

Composite film of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) and MoO3 as an efficient hole injection layer for polymer light-emitting diodes

We demonstrate improved performances in polymer light-emitting diodes (PLEDs) using a composite film of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) and MoO₃ powder as a hole injection layer. The PLED with the composite film exhibits the current efficiency of 13.5 cd/A, driving voltage of 3.4 V, and half lifetime of 108.1 h, while those values of the PLED with a pristine PEDOT:PSS was 11.3 cd/A, 3.8 V, and 41.5 h, respectively. We also analyze the morphological, optical and electrical properties of the composite films by atomic force microscopy (AFM), UV–Vis-IR absorption, and ultraviolet photoemission spectroscopy (UPS). This work suggests that mixing MoO₃ into PEDOT:PSS is a simple and promising technique for use solution-based devices as an hole injection layer.     

Optoelectronic characteristics of MEH-PPV polymer LEDs with thin,doped composition-graded a-SiC:H carrier injection layers

The optoelectronic characteristics of poly(2-methoxy-5-(2′ethyl-hexoxy)-1,4-phenylene-vinylene) (MEH-PPV) polymer LEDs (PLEDs) have been improved by employing thin doped composition-graded (CG) hydrogenated amorphous silicon–carbide (a-SiC:H) films as carrier injection layers and O₂-plasma treatment on indium–tin-oxide (ITO) transparent electrode, as compared with previously reported ones having doped constant-optical-gap a-SiC:H carrier injection layers. For PLEDs with an n-type a-SiC:H electron injection layer (EIL) only, the electroluminescence (EL) threshold voltage and brightness were improved from 7.3 V, 3162 cd/m² to 6.3 V, 5829 cd/m² (at a current density J = 0.6 A/cm²), respectively, by using the CG technique. The enhancement of EL performance of the CG technique was due to the increased electron injection efficiency resulting from a smoother barrier and reduced recombination of charge carriers at the EIL and MEH-PPV interface. Also, surface modification of the ITO transparent electrode by O₂-plasma treatment was used to further improve the EL threshold voltage and brightness of this PLED to 5.1 V, 6250 cd/m² (at J = 0.6 A/cm²). Furthermore, by employing the CG n[p]-a-SiC:H film as EIL [hole injection layer (HIL)] and O₂-plasma treatment on the ITO electrode, the brightness of PLEDs could be enhanced to 9350 cd/m² (at a J = 0.3 A/cm²), as compared with the 6450 cd/m² obtained from a previously reported PLED with a constant-optical-gap n-a-SiCGe:H EIL and p-a-Si:H HIL.     

Efficient simplified orange and white phosphorescent organic light-emitting devices with reduced efficiency roll-off

Efficient orange phosphorescent organic light-emitting devices based on simplified structure with maximum efficiencies of 46.5 lm/W and 51.5 cd/A were reported. One device had extremely low efficiency roll-off with efficiencies of 50.6 cd/A, 45.0 cd/A and 39.2 cd/A at 1000 cd/m², 5000 cd/m² and 10,000 cd/m² respectively. The reduced efficiency roll-off was attributed to more balanced carrier injection and broader recombination zone. The designed simplified white device showed much lower efficiency roll-off than the control one based on multiple emitting layers. The efficiency of simplified white device was 40.8 cd/A at 1000 cd/m² with Commission Internationale de I’Eclairage coordinates of (0.39, 0.46).     

Pyrene functioned diarylfluorenes as efficient solution processable light emitting molecular glass

In this paper, we described a new category of solution processable small molecule organic light emitting materials, the pyrene functioned diarylfluorenes: 2PE-PPF and DPE-PPF. They emit blue light in solution and green light in film, and show high thermal stability with the 5% weight loss temperature (T_d) over 400 °C. The glass transition temperature (T_g) for 2PE-PPF and DPE-PPF is 102 °C and 147 °C, respectively. These molecules are interesting molecular glass and they have good film forming abilities. Smooth and uniform film could be obtained by spin-coating. This character enables them able to be used in solution processed OLEDs by spin-coating or jet-printing. Single layered device using 2PE-PPF as the active material shows a turn-on voltage of 3.2 V, brightness over 8000 cd/m² and current efficiency up to 2.55 cd/A. Double layered device by inserting TPBI as the hole-blocking electron-transporting layer increases the maximum efficiency to 5.83 cd/A.     

High-efficiency fluorescent white organic light-emitting device with double emissive layers

The authors demonstrate a fluorescent white organic light-emitting device (WOLED) with double emissive layers. The yellow and blue dyes, 5,6,11,12-tetraphenylnaphthacene and N-(4-((E)-2-(6-((E)-4-(diphenylamino)styryl)naphthalen-2-yl)vinyl)phenyl)-N-phenylbenzenamine, are doping into the same conductive host material, N,N′-dicarbazolyl-4-4′-biphenyl). The maximum luminance and power efficiency of the WOLED are 14.6 cd/A and 9.5 lm/W at 0.01 mA/cm², with the maximum brightness of 20 100 cd/m² at 17.8 V. The Commission International de L’Éclairage coordinates change slightly from (0.27, 0.37) to (0.28, 0.36), as the applied voltage increases from 6 V to 16 V. The high efficiencies can be attributed to the balance between holes and electrons.     

Fluorene derivatives for highly efficient non-doped single-layer blue organic light-emitting diodes

Diphenylamino- and triazole-endcapped fluorene derivatives which show a wide energy band gap, a high fluorescence quantum yield and high stability have been synthesized and characterized. Single-layer electroluminescent devices of these fluorene derivatives exhibited efficient deep blue to greenish blue emission at low driving voltage. The single-layer OLED of PhN-OF(1)-TAZ shows a maximum current efficiency of 1.54 cd/A at 20 mA cm⁻² with external quantum efficiency (EQE) of 2.0% and CIE coordinates of (0.153, 0.088) in deep blue region, while the single-layer device of oligothienylfluorene PhN-OFOT-TAZ shows a maximum brightness of 7524 cd/m² and a maximum current efficiency of 2.9 cd/A with CIE coordinates of (0.20, 0.40) in greenish blue.     

Color stable phosphorescent white organic light-emitting diodes with double emissive layer structure

In this paper, we report color stable phosphorescent white organic light-emitting diodes (OLEDs) based on a double emissive layer (EML) structure composed of blue and red/green phosphorescent units. Deep hole trapping situation of red and green dopants at the red/green EML could induce less voltage dependent white spectral characteristics by restricting the change of exciton generation zone. A wide band-gap host material, 2,6-bis(3-(carbazol-9-yl)phenyl)pyridine (26DCzPPy), was used for achieving such deep-trap generation. Fabricated phosphorescent white OLED shows a slight color coordinate change of (?0.002, +0.002) from 1000 cd/m² to 5000 cd/m² with power efficiency of 38.7 lm/W and current efficiency of 46.4 cd/A at 1000 cd/m². In addition, negligible color changes were observed by delaying red dopant saturation time using optimum red dopant concentration.     

Doping-free orange and white phosphorescent organic light-emitting diodes with ultra-simply structure and excellent color stability

We demonstrate simplified doping-free orange phosphorescent organic light-emitting diodes (OLEDs) based on ultrathin emission layer. The optimized orange device has the maximum current efficiency of 52.1 cd/A and power efficiency of 36.3 lm/W, respectively. Efficient simplified doping-free white OLEDs employing blue and orange ultrathin emission layers have excellent color stability, which is attributed to the avoidance of the movement of charges recombination zone and no differential color aging. One white device exhibits high efficiency of 33.6 cd/A (30.1 lm/W). Moreover, the emission mechanism of doping-free orange and white OLEDs is also discussed.     

A hybrid white organic light-emitting diode with stable color and reduced efficiency roll-off by using a bipolar charge carrier switch

A hybrid white organic light-emitting diode (WOLED) with an emission layer (EML) structure composed of red phosphorescent EML/green phosphorescent EML/spacer/blue fluorescent EML was demonstrated. This hybrid WOLED shows high efficiency, stable spectral emission and low efficiency roll-off at high luminance. We have attributed the significant improvement to the wide distribution of excitons and the effective control of charge carriers in EMLs by using mixed 4,4′,4″-tri(9-carbazoyl) triphenylamine (TCTA) and bis[2-(2-hydroxyphenyl)-pyridine] beryllium (Bepp₂) as the host of phosphorescent EMLs as well as the spacer. The bipolar mixed TCTA:Bepp_2, which was proved to be a charge carrier switch by regulating the distribution of charge carriers and then the exciton recombination zone, plays an important role in improving the efficiency, stabilizing the spectrum and reducing the efficiency roll-off at high luminous. The hybrid WOLED exhibits a current efficiency of 30.2 cd/A, a power efficiency of 32.0 lm/W and an external quantum efficiency of 13.4% at a luminance of 100 cd/m², and keeps a current efficiency of 30.8 cd/A, a power efficiency of 27.1 lm/W and an external quantum efficiency of 13.7% at a 1000 cd/m². The Commission Internationale de l’Eclairage (CIE) coordinates of (0.43, 0.43) and the color rendering index (CRI) of 89 remain nearly unchanged in the whole range of luminance.     

Electrical and optical characteristics of phosphorescent organic light-emitting device with thin-codoped layer insertion

In this paper, we demonstrated the changes of electrical and optical characteristics of a phosphorescent organic light-emitting device (OLED) with tris(phenylpyridine)iridium Ir(ppy)₃ thin layer (4 nm) slightly codoped (1%) inside the emitting layer (EML) close to the cathode side. Such a thin layer helped for electron injection and transport from the electron transporting layer into the EML, which reduced the driving voltage (0.40 V at 100 mA/cm²). Electroluminescence (EL) spectral shift at different driving voltage was observed in our blue OLED with [(4,6-di-fluoropheny)-pyridinato-N,C^2′]picolinate (FIrpic) emitter, which came from the recombination zone shift. With the incorporation of thin-codoped Ir(ppy)₃, such EL spectral shift was almost undetectable (color coordinate shift (0.000, 0.001) from 100 to 10,000 cd/m²), due to the compensation of Ir(ppy)₃ emission at low driving voltage. Such a methodology can be applied to a white OLED which stabilized the EL spectrum and the color coordinates ((0.012, 0.002) from 100 to 10,000 cd/m²).     

Enhanced pure red electroluminescence intensity of Eu(o-BBA)3(phen) by red dye co-doping and inorganic semiconductor as charge carrier function layer

There is an emission peak at 494 nm in the electroluminescence (EL) of PVK [poly(n-vinylcarbazole)]: Eu(o-BBA)₃(phen) besides PVK exciton emission and Eu³⁺ characteristic emissions. Both the peaking at 494 nm emission and PVK emission influenced the color purity of red emission from Eu(o-BBA)₃(phen). In order to restrain these emissions and obtain high intensity red emission, 4-(dicyanomethylene)-2-t-butyl-6-(1,1,7,7,-tetramethyljulolidy-9-enyl)-4Hpyran (DCJTB) and Eu(o-BBA)₃(phen) were co-doped in PVK solution and used as the active emission layer. The EL intensity of co-doped devices reached to 420 cd/m² at 20 V driving voltage. The chromaticity coordinates of EL was invariable (x = 0.55, y = 0.36) with the increase of driving voltage. For further improvement of EL intensity, organic–inorganic hybrid devices (ITO/active emission layer/ZnS/Al) were fabricated. The EL intensity was increased by a factor of 2.5 [(420 cd/m²)/(168 cd/m²)] when the Eu complex was doped with an efficient dye DCJTB, and by a factor of ≈4 [(650 cd/m²)/(168 cd/m²)] when in addition ZnS layer was deposited on such an emitting layer prior to evaporation of the Al cathode.     

Bright and efficient white stacked organic light-emitting diodes

High brightness and efficient white stacked organic light-emitting diodes have been fabricated by connecting individual blue and red emissive units with the anode–cathode layer (ACL) consisting of LiF (1 nm)/Ca (25 nm)/Ag (15 nm). Use 1,3-bis(carbazol-9-yl)benzene (mCP):bis(3,5-difluoro-2-(2-pyridyl)phenyl-(2-carboxypyridyl) iridium III (FirPic) as the blue emitter and tris(8-hydroxy-quinolinato)aluminium (Alq₃):4-(dicyanomethylene)-2-tert-butyl-6-(1,1,7,7-tetramethyljulolidin-4-yl-vinyl)-4H-pyran (DCJTB) as the red emitter, white light emission with CIE coordinates of (0.32, 0.38) was obtained at a driving voltage of 26 V with a luminance of 40,000 cd/m². By replacing the red fluorescent emitter with a phosphorescent one, the color coordinates were improved to (0.33, 0.31). The peak external quantum efficiency was enhanced from 5.3% (at 28.2 mA/cm²) to 10.5% (at 1.4 mA/cm²) as well.     

High-performance green phosphorescent top-emitting organic light-emitting diodes based on FDTD optical simulation

We have successfully applied finite-difference time-domain (FDTD) method in top-emitting organic light-emitting diodes (TOLEDs) for structure optimization, demonstrating good agreement with experimental data. A mixed host with both hole transport and electron transport materials is employed for the green phosphorescent emitter to avoid charge accumulation and broaden the recombination zone. The resulting TOLEDs exhibit ultra-high efficiencies, low current efficiency roll-off, and a highly saturated color, as well as hardly detectable spectrum shift with viewing angles. In particular, a current efficiency of 127.0 cd/A at a luminance of 1000 cd/m² is obtained, and maintains to 116.3 cd/A at 10,000 cd/m².     

Low driving voltage white organic light-emitting diodes with high efficiency and low efficiency roll-off

Single emission layer white organic light-emitting diodes (WOLEDs) showing high color stability, low turn-on voltage, high efficiency and low efficiency roll-off by incorporating iridium(III) bis[(4,6-difluo-rophenyl)-pyridinato-N,C2] (FIrpic) and bis(2-phenylbenzothiazolato) (acetylacetonate)iridium(III) (Ir(BT)₂(acac)) phosphors dyes have been demonstrated. Our WOLEDs without any out-coupling schemes as well as n-doping strategies show low operating voltages, low turn-on voltage (defined for voltage to obtain a luminance of 1 cd/m²) of 2.35 V, 79.2 cd/m² at 2.6 V, 940.5 cd/m² at 3.0 V and 10 300 cd/m² at 4.0 V, respectively, and achieve a current efficiency of 40.5 cd/A, a power efficiency of 42.6 lm/W at a practical brightness of 1000 cd/m², and a low efficiency roll-off 14.7% calculated from the maximum efficiency value to that of 5000 cd/m². Such improved properties are attributed to phosphors assisted carriers transport for achieving charge carrier balance in the single light-emitting layer (EML). Meanwhile the host–guest energy transfer and direct exciton formation process are two parallel pathways serve to channel the overall excitons to dopants, greatly reduced the unfavorable energy losses.     

Design and realization of a flexible QQVGA AMOLED display with organic TFTs

We present a QQVGA top emitting monochrome AMOLED display with 85dpi resolution using an organic TFT backplane on low temperature PEN-foil. The backplane process flow is based on a 7 layer photolithography process that yields a final mobility of the OTFT of ～0.4 cm²/Vs. The aperture ratio of the top-emitting OLEDs is over 75%. For operation at 10 V supply voltage (V_DD), the brightness of the display using red and green OLEDs exceeds 200 cd/m².     

Highly enhanced light extraction from organic light emitting diodes with little image blurring and good color stability

We report a highly enhanced light extraction from a top emission organic light emitting diode with little image blurring and color variation with viewing angle. Direct integration of a high refractive index micro lens array on the top of the transparent indium zinc oxide top electrode of a green phosphorescent OLED showed a significant enhancement of light extraction to get EQE of 44.7% from 27.6%, the power efficiency of 134.7 lm/w from 85.9 lm/W and the current efficiency of 217.2 cd/A from 120.7 cd/A without image blurring. In addition, the device showed excellent color stability on viewing angle with Commission Internationale de l’Eclairage (CIE) coordinate of Δx = 0.01, Δy = 0.01 as the viewing angle varied from 0° to 60°.     

High-efficiency and multi-function blue fluorescent material for organic electroluminescent devices

We demonstrate one high-efficiency blue fluorescent material, N-(4-((E)-2-(6-((E)-4-(diphenylamino)styryl)naphthalen-2-yl)vinyl)phenyl)-N-phenylbenzenamine, with an emissive peak of 472 nm and the hole-transporting property speculated from different devices. It can function either as the single emissive layer or as the dye doped in N,N′-dicarbazolyl-4-4′-biphenyl (CBP). The former shows a maximum current efficiency and luminance of 7.06 cd/A (0.04 mA/cm²) and 16 930 cd/m², in contrast to 11.5 cd/A (4.35 mA/cm²) and 25 690 cd/m² for the latter. The better performance of the latter can be attributed to the bipolar carrier transport property of CBP and the hole-blocking and electron-transporting characteristic of 4,7-diphenyl-1,10-phenanthroline (BPhen), which resulting in a good balance of holes and electrons. Moreover, the Commission Internationale De L’Eclairage coordinates of the latter change slightly from (0.162, 0.3) to (0.148, 0.268) upon increasing the voltage from 3 V to 14 V.     

Work function modification of solution-processed tungsten oxide for a hole-injection layer of polymer light-emitting diodes

We report a solution-processed tungsten oxide hole injection layer for polymer light-emitting diodes (PLEDs). Unlike vacuum evaporated tungsten oxide, solution-processed tungsten oxide has a reduced work function due to contamination of the ambient atmosphere. To increase the work function of tungsten oxide layer, an organic ionic solution containing poly(ethylene oxide) and tetra-n-methylammonium tetrafluoroborate was coated on the tungsten oxide layer. Organic ions infiltrated into the tungsten oxide layer and formed an interfacial dipole, increasing the layer’s work function by 0.4 eV. As a result, a PLED, which had a hole-injection layer of the tungsten oxide and organic ionic solution, showed a performance equivalent to that of the PEDOT:PSS-based device with even higher maximum luminance of 27,560 cd/m² at 10 V.     

Hydroxyethyl cellulose filled with M2+ chelate complexes with ethylenediaminetetraacetic acid (EDTA) as an effective electron-injection layer for polymer light-emitting diodes

An effective electron-injection layer (EIL) is crucial to the development of highly efficient polymer light-emitting diodes (PLEDs) using stable, high work-function aluminium as the cathode. This work presents the first investigation using hydroxyethyl cellulose (HEC), filled with chelate complexes [(CH₃COO)₂-M, EDTA-M; M: Ca²⁺, Mg²⁺], as an electron-injection layer (EIL) to fabricate multilayer polymer light-emitting diodes (ITO/PEDO:PSS/HY-PPV/EIL/Al) by spin-coating processes. Devices based on HEC doped with EDTA-M provided the best performance. The maximum luminance and maximum current efficiency of polymer light-emitting diodes with EDTA-Ca in an HEC layer were 7502 cd/m² and 2.85 cd/A, respectively, whereas those with EDTA-Mg were 8443 cd/m² and 3.12 cd/A, which was approximately seven- to eight-fold of that without EIL. This performance enhancement was attributed to electron donation from the chelator that reduces metal cations to a “pseudo-metallic state”, enabling it to act as an intermediate step to facilitate electron injection. The results demonstrate that chelates of bivalent cations with EDTA can potentially serve as electron-injection materials for optoelectronic applications.