Mixed Convection in an Obstructed Open-Ended Cavity

Mixed convection in an obstructed cavity with heated horizontal walls is investigated in this work. Brinkman-Forchheimer-extended Darcy model is utilized to describe the flow characteristics within a porous medium for different angles of attack with respect to the forced convection. Numerical results are obtained for a wide range of Grashof numbers (10²–10⁹), Reynolds numbers (10²–10⁵), Darcy numbers (10^?6–10^?1), and aspect ratios (0.25–2). Effects of the pertinent physical parameters are investigated in terms of the flow and temperature fields, as well as Nusselt number distributions. The presented results show that the Darcy number plays a significant role on the flow and thermal fields and the Nusselt number distributions for different flow configurations. For an inclined flow, the vertical velocity component is substantially diminished within a narrow entrance section near the inlet boundary. It is shown that as the aspect ratio increases the thickness of the thermal boundary layer increases, resulting in a decrease in the heat transfer rate though the horizontal walls.     

Lattice Boltzmann Simulation of Natural Convection in a Square Cavity with Linearly Heated Wall(s)

In this study, the lattice Boltzmann method is used in order to investigate the natural convection in a cavity with linearly heated wall(s). The bottom wall is heated uniformly and the vertical wall(s) are heated linearly, whereas the top wall is insulated. Investigation has been conducted for Rayleigh numbers of 10³ to 10⁵, while Prandtl number is varied from 0.7 to 10. The effects of an increase in Rayleigh number and Prandtl number on streamlines, isotherm counters, local Nusselt number and average Nusselt number are depicted. It has been observed that the average Nusselt number at the bottom wall augments with an increase in Prandtl number.     

Numerical Simulation of Double Diffusive Mixed Convection in a Lid-Driven Square Cavity Using Velocity-Vorticity Formulation

In this article, convection driven by combined thermal and solutal concentration buoyancy effects in a lid-driven square cavity is examined using velocity-vorticity form of Navier-Stokes equations. The governing equations consist of vorticity transport equation, velocity Poisson equations, energy equation, and concentration equation. Validation results are discussed for convection due to heat and mass transfer in a lid-driven square cavity at Re = 500, Le = 2, and G_RT  = G_RS  = 100. These results indicate that the present velocity-vorticity formulation could predict the characteristic parameters of flow, temperature, and solutal concentration fields using a much coarser mesh compared to the mesh used in a stream function-vorticity formulation. The capability of the proposed algorithm to handle complex geometry is demonstrated by application to mixed convection in a lid-driven square cavity with a square blockage. The effect of buoyancy ratio on the convection phenomenon is discussed for buoyancy ratio varying from ? 100 to 100 at Re = 100. Under opposing temperature and concentration gradients along the vertical direction, the negative buoyancy ratios give rise to aiding flows.     

MHD Mixed Convection in a Channel with a Triangular Cavity

A numerical study has been carried out in an open channel, which have a heated triangular cavity at the bottom wall. The remaining walls of the channel are adiabatic. Flow inlets to the channel with uniform velocity and fully developed flow are accepted at the exit of the channel. Steady state mixed convection by laminar flow has been studied by numerically solving governing equations to obtain flow field and temperature distribution under the magnetic field and Joule effect. Equations are solved via the Galerkin weighted residual finite element technique. Calculations are performed for different governing parameters such as Hartmann number (10 ≤ Ha ≤ 100), Reynolds number (100 ≤ Re ≤ 2,000), Rayleigh number (10³ ≤Ra ≤ 10⁵), Joule parameter (0 ≤ J ≤ 5), and Prandtl number (1 ≤ Pr ≤ 10). It is found that heat transfer decreases with an increasing of the Hartmann number especially at higher values of Rayleigh number. Fluid temperature at the exit of the channel also decreases with increasing of Hartmann number. Fluid temperature at the outlet of the channel becomes higher at low Reynolds number and higher Rayleigh number. However, it decreases with the decreasing of the Reynolds number.     

封闭方腔自然对流换热的研究

论述和分析了封闭方腔自然对流换热的研究进展,研究了采用商业软件FLUENT对此模拟的方法以及换热规律研究的可行性,所获得的数值模拟结果与研究文献做了对比分析,其模拟结果是正确的,由此表明:采用FLUENT软件通过数值模拟方法不仅能获得封闭腔自然对流换热的结果,还能研究其换热规律,是解决封闭腔自然对流换热的有效工具。     

Non-Darcy Mixed Convection in a Porous Square Enclosure Under Suction/Injection Effects with a Non-Isothermal Vertical Wall

The influence of suction/injection at bottom/top or top/bottom walls on non-Darcy mixed convection flow with a sinusoidally varying temperature on the left vertical wall in a two-dimensional square porous enclosure is analyzed. The Forchheimer extended Darcy model is considered for flow equations. The fully developed equations are nondimensionalized, and then solved numerically by the Galerkin finite element method. A parametric study is carried out and the results are obtained for various values of the parameters such as the Grashof number (Gr*), Rayleigh number (Ra), suction/injection velocity (a), suction/injection window width (D/H), and amplitude (λ) of the sinusoidally varying temperature profile. The computed flow and temperature fields are visualized through streamlines, isotherms, and loal/global cumulative heat flux plots.     

Lattice Boltzmann Simulation of Natural Convection in an Inclined Square Cavity with Spatial Temperature Variation

In this paper, natural convection heat transfer in an inclined square cavity filled with pure air (Pr = 0.71) was numerically analyzed with the lattice Boltzmann method. The heat source element is symmetrically embedded over the center of the bottom wall, and its temperature varies sinusoidally along the length. The top and the rest part of the bottom wall are adiabatic while the sidewalls are fixed at a low temperature. The influences of heat source length, inclination angle, and Rayleigh number (Ra) on flow and heat transfer were investigated. The Nusselt number (Nu) distributions on the heat source surface, the streamlines, and the isotherms were presented. The results show that the inclination angle and heat source length have a significant impact on the flow and temperature fields and the heat transfer performance at high Rayleigh numbers. In addition, the average Nu firstly increases with γ and reaches a local maximum at around γ = 45°, then decreases with increasing γ and reaches minimum at γ = 180° in the cavity with ? = 0.4. Similar behaviors are observed for ? = 0.2 at Ra = 10⁴. Moreover, nonuniform heating produces a significant different type of average Nu and two local minimum average Nu values are observed at around γ = 45° and γ = 180° for Ra = 10⁵ in the cavity with ? = 0.2.     

Mixed Convection of Nanofluid Flows in a Square Lid-Driven Cavity Heated Partially From Both the Bottom and Side Walls

This article presents the results of a numerical study on mixed convection within a square lid-driven which was heated simultaneously by two finite heat sources on the bottom and side walls, and also filled with nanofluids. The results were presented for different nanofluids. The governing equations were solved using a finite volume approach by the SIMPLE algorithm. The effects of the Rayleigh number, Reynolds number, the solid volume fraction, the dimensions of heaters, and their locations on the streamlines and isotherms contours were investigated accurately. Also, the effects of the above parameters on the average Nusselt number along two heat sources were precisely presented. Moreover, variations of the average Nusselt number of two heaters were considered whenever one heater was fixed and the location of the other heater was varied along the wall. In addition, variations of the length of one heater on the average Nusselt number were also studied whenever the length of the other heater was fixed.     

Effect of Radiation on Mixed Convection Inside a Lid-Driven Square Cavity With Various Optical Thicknesses and Richardson Numbers

This work studies numerically the effect of the radiative heat transfer on the flow and thermal behaviors of the mixed convection in a lid-driven square cavity in the presence of radiatively emitting, absorbing, and isotropically scattering gray medium. The Boussinesq approximation has been used in modeling the governing equations, and the SIMPLE (semi-implicit method for pressure-linked equations) algorithm is used in coupling the velocity and pressure fields. The radiative transfer equation and the governing equations have been solved respectively by the discrete ordinates method and the finite-volume method in order to obtain the temperature, velocity, and heat flux distributions in the participating medium. The present numerical simulations are validated by comparison with several earlier studies. Then, the temperature and velocity distributions and Nusselt numbers have been analyzed in a broad range of optical thicknesses from 0 to 100 and Richardson numbers from 0.01 to 100. The results show that the radiation has a significant role on the flow and thermal behaviors in the lid-driven square cavity. As an example, we can refer to a sweep behavior that is detected in the velocity distributions of the lid-driven cavity.     

Mixed Convection in Lid-Driven Trapezoidal Cavities with an Aiding or Opposing Side Wall

Mixed convection heat transfer and fluid flow fields inside a lid-driven trapezoidal cavity were studied numerically. The cavity horizontal walls were thermally insulated while the inclined side walls were maintained isothermally at different temperatures. Forced convection was induced by moving the hotter right inclined side wall. The problem is formulated using the stream function–vorticity procedure. Together with the established boundary conditions on the right moving wall, the problem is solved by the finite difference method. The Richardson number Ri (0.01–10) and inclination angle of the side walls Φ (66–80°) were considered as pertinent parameters and investigated in two lid-driven cases: aiding and opposing directions. The results show that the behavior of Nusselt number is different from Richardson number depending on the direction of the lid. The inclination angle of the side walls was found to have a significant effect on Nusselt number when Ri was relatively low (≤1); otherwise, a negligible effect of Φ on Nusselt number was recorded.     

Influences of Physical Parameters on Mixed Convection in a Horizontal Lid-Driven Cavity with an Undulating Base Surface

The problem of steady, laminar, and incompressible mixed convection flow in a horizontal lid-driven cavity is studied. In this investigation, two vertical walls of the cavity are perfectly insulated and the wavy bottom wall is considered at an identical temperature higher than the top lid. The enclosure is assumed to be filled with a Bousinessq fluid. The study includes computations for different physical parameters, such as cavity aspect ratio (AR) from 0.5 to 2, amplitude of undulating wall (A) from 0 to 0.075, and number of undulations (λ) from 0 to 3. The pressure-velocity form of Navier-Stokes and energy equations are used to represent the mass, momentum, and energy conservations of the fluid medium in the cavity. The governing equations and boundary conditions are converted to dimensionless form and solved numerically by the penalty finite element method with discretization by triangular mesh elements. Flow and heat transfer characteristics are presented in terms of streamlines, isotherms, average Nusselt number (Nu), and maximum temperature (θ _max ) of the fluid. Results show that the wavy lid-driven cavity can be considered an effective heat transfer mechanism at larger wavy surface amplitude, as well as the number of waves and cavity aspect ratio.     

Natural Convection in a Square Cavity with Discrete Heating at the Bottom with Different Fin Shapes

Numerical study is carried out to investigate the effect of different fin shapes on heating a square cavity by small heating strip located at the bottom wall. The natural convection of air is considered with constant heat flux from heat source which is located at the center of the bottom wall. The width of the heating strip is assumed to be 20% of the total width of the bottom wall. The remaining (non-heated) part of the bottom wall and the top wall are adiabatic and the side walls are maintained at constant temperature. The investigation considered four shapes of aluminum fins with equal area and equal base width. The easy to fabricate fin shapes are considered as: rectangular, one triangular, two opposite triangular and two isosceles triangular shape. Other parameters considered are the total area of the fin (or the height of the fin) and the Grashof number in the laminar flow range. It is found that the heat transfer can be enhanced by either increasing the Grashof number or the height of the fins. In most of the investigated cases the heat transfer in the case of the two opposite triangular fins shape is found to be higher than that of the other shapes under the same conditions.     

Natural Convection Heat Transfer Enhancement in a Square Cavity Periodically Cooled from Above

The present article reports numerical results of natural convection within an air filled square cavity with its horizontal walls submitted to different heating models. The temperature of the bottom horizontal surface (hot temperature) is maintained constant, while that of the opposite surface (cold temperature) is varied sinusoidally with time. The remaining vertical walls are considered adiabatic. The parameters governing the problem are the amplitude (0 ≤ a ≤ 0.8) and the period (τ ≥ 0.001) of the variable temperature, the Rayleigh number (10³ ≤ Ra ≤ 7 × 10⁶), and the Prandtl number (Pr = 0.71). In constant cooling conditions (a = 0), up to three different solutions (monocellular flow MF, bicellular vertical flow BVF, and bicellular horizontal flow BHF) are obtained. Their existence ranges are delineated and, in the limits of the existence range of each solution, the transitions observed are identified and described. In the variable cooling conditions, the effect of the amplitude and the period of the exciting temperature on fluid flow and heat transfer is examined in the case of the MF, and BHF for specific values of Ra. Results are presented in terms of Ψ _max (t), Ψ _min (t), Nu(t) and streamlines, heatlines, and isotherms during the evolutions of selected flow cycles. In comparison with the constant heating conditions, it is found that the variable cooling temperature could lead to a drastic change in the flow structure and the corresponding heat transfer, especially at specific low periods of the cold variable temperature. This leads to a resonance phenomenon characterized by an important increase in heat transfer by about 46.1% compared to the case of a constant cold temperature boundary condition.     

Laminar Natural Convection of Bingham Fluids in Square Cross-Sectioned Cylindrical Annular Cavity with Differentially Heated Vertical Walls Subjected to Constant Heat Fluxes

Steady-state numerical simulations have been conducted to investigate natural convection of yield stress fluids obeying Bingham model in square cross-sectioned axisymmetric cylindrical annular enclosure with vertical walls subjected to constant heat fluxes for nominal Rayleigh number range of 10³ to 10⁶, nominal Prandtl number of 10 to 10³ for different values of internal cylinder radius. It is found that the mean Nusselt number on the inner periphery increases (decreases) with increasing nominal Rayleigh (Bingham) number due to strengthening (weakening) of thermal advection. However, the values of the mean Nusselt number on the inner periphery obtained for Bingham fluids are smaller than that obtained for Newtonian fluids for the same set of nominal Rayleigh and Prandtl numbers. The mean Nusselt number normalized by the corresponding value obtained for pure conductive transport increases with increasing internal radius before asymptotically approaching the mean Nusselt number for a square enclosure. This suggests that the ratio of the convective to the conductive transport strengthens with increasing cylinder radius in the cylindrical annular cavity. Detailed physical explanations have been provided for the effects of the aforementioned parameters on the mean Nusselt number on the inner periphery and correlations have been proposed for the mean Nusselt number on the inner periphery for both Newtonian and Bingham fluids.     

封闭方腔内叉排管间熔融盐自然对流换热

以硝酸锂熔融盐为流体介质,对封闭方腔内交叉排布的四根热管间的介质自然对流换热进行了数值模拟,研究了热管不同位置和不同瑞利数对方腔内介质自然对流换热特性的影响。结果表明:管间距ε=0.5时,腔体内温度场和流场的对称性开始打破;ε=0.4和0.5时,下管及左右两管产生的热羽流冲刷上管热边界层,使上管局部Nu_φ分别在圆周角φ=180°、φ=280°和φ=80°处出现增强;ε=0.6时,上管不再受下管羽流影响。随着管间距增大,上管平均Nu_m越来越小,下管Nu_m越来越大;ε=0.4~0.6时,管间距对左右两管Nu_m影响很小,但ε=0.7时,左右两管平均换热均明显增强。     

Developing Flow of Mixed Convection in a Vertical Rectangular Duct with One Heating Wall

Heat transfer and flow patterns of laminar mixed confection in the developing region of a vertical rectangular duct with one heating wall have been investigated numerically in this study. The parabolic boundary layer model is adopted to predict the three-dimensional buoyancy-assisted flow field. Governing equations art solved by using the SIMPI.KC method coupled with a forward marching, implicit finite difference scheme. The velocity and temperature distributions as well as the stream wise variations of local heat flux and fluid pressure are calculated under various geometric parameters. Results show that the flow characteristics are significantly dependent on the buoyancy effect (Gr / Re), the aspect ratio of cross section of duct (H). and the Prandtl number (Pr). The numerical solutions obtained have been compared and verified with existing studies. Meanwhile, the analytical solutions of fully developed flaw recently reported 181 are found to exactly portray the behavior of flow far downstream.     

Numerical Study on Double Diffusive Mixed Convection with a Soret Effect in a Two-Sided Lid-Driven Cavity

In the present study, a numerical analysis is performed to understand the mixed convection flow, and heat and mass transfer with Soret effect in a two-sided lid-driven square cavity. The horizontal walls of the cavity are adiabatic and impermeable, while vertical walls are kept at constant but different temperatures and concentrations. The vertical walls move in a constant velocity. According to the direction of the movement of walls, three cases have been studied for different combinations of parameters involved in the study. The governing unsteady equations are solved numerically by the finite volume method with the SIMPLE algorithm. The results are presented graphically in the form of streamlines, isotherms, and velocity profiles. Heat and mass transfer rates are reduced if both walls are moving the in same direction, while heat and mass transfer rates are enhanced if the walls are moving in the opposite direction.     

MHD Turbulent and Laminar Natural Convection in a Square Cavity utilizing Lattice Boltzmann Method

In this study, the lattice Boltzmann method was used to solve the turbulent and laminar natural convection in a square cavity. In this paper a fluid with Pr = 6.2 and different Rayleigh numbers (Ra = 10³, 10⁴,10⁵ for laminar flow and Ra = 10⁷, 10⁸,10⁹ for turbulent flow) in the presence of a magnetic field (Ha = 0, 25, 50, and 100) was investigated. (Results show that the magnetic field drops the heat transfer in the laminar flow as the heat transfer behaves erratically toward the presence of a magnetic field in a turbulent flow. Moreover, the effect of the magnetic field is marginal for a turbulent flow in contrast with a laminar flow.The greatest influence of the magnetic field is observed at Ra = 10⁵ from Ha = 0 to 100 as the heat transfer decreases significantly.     

Effect of Heat-Generating Solid Body on Mixed Convection Flow in a Ventilated Cavity

The mixed convection flow and heat transfer characteristics inside a square ventilated cavity with a heat-generating solid circular body located at the center have been investigated numerically. The inlet opening is at the bottom of the left wall, while the outlet one is at the top of the right wall, and all the walls of the cavity are considered to be adiabatic. A Galerkin weighted residual finite element method is used to solve the governing equations of mass, momentum, and energy. The behavior of the fluid in the ranges of dimensionless cylinder diameter from 0.1 to 0.6 of the heat generating body, thermal conductivity ratio range from 0.2 to 50 between solid and fluid, and heat generating parameter range from 1 to 5 is described in detail. The medium considered is air with a Prandtl number of 0.71. It is found that the flow and temperature field is strongly dependent on the already-mentioned parameters for the ranges considered. The variation of the mean Nusselt number, the dimensionless average drag force, and the average temperature of the fluid versus Richardson number are presented for these parameters.     

Effect of Heat Transfer on Natural Convection in a Square Cavity With Two Source Pairs

In this paper, the influence of a small heating source, positioned in the lateral walls of a square cavity, is investigated. Numerical and experimental analyses are performed to investigate natural convection heat transfer in a square cavity heated by hot strips in the side walls. The H side square cavity is filled with air and heated by two hot strips with heights of H/4. The effect of placing the hot strips at two different positions is evaluated. The temperature distribution and the Nusselt numbers at different Rayleigh numbers are experimentally measured using both real-time and double-exposure holographic interferometry. The isothermal patterns obtained through the holographic interferometry are compared with the temperature and velocity fields from a numerical study performed using the finite-volume code Fluent.