Etch characteristics of TiN/Al2O3 thin film by using a Cl2/Ar adaptive coupled plasma

In this study, we carried out an investigation in the etching characteristics of TiN thin films in a C1₂/Ar adaptive coupled plasma. The maximum etch rate of the TiN thin films was 768 nm/min at a gas mixing ratio of C1₂ (75%)/Ar (25%). At the same time, the etch rate was measured as functions of the various etching parameters. The X-ray photoelectron spectroscopy analysis showed the efficient destruction of the oxide bonds by the ion bombardment as well as the accumulation of low volatile reaction products on the etched surface. Field emission Auger electron spectroscopy analysis was used to examine the efficiency of the ion-stimulated desorption of the reaction products.     

Dry etch properties of IZO thin films in a CF4/Ar adaptively coupled plasma system

In this study, we investigated to the etch characteristics of indium zinc oxide (IZO) thin films in a CF₄/Ar plasma, namely, etch rate and selectivity toward SiO₂. A maximum etch rate of 76.6 nm/min was obtained for IZO thin films at a gas mixture ratio of CF₄/Ar (25:75%). In addition, etch rates were measured as a function of etching parameters, including adaptively coupled plasma chamber pressure. X-ray photoelectron spectroscopy analysis showed efficient destruction of the oxide bonds by ion bombardment, as well as accumulation of low volatile reaction products on the surface of the etched IZO thin films. Field emission Auger electron spectroscopy analysis was used to examine the efficiency of ion-stimulated desorption of the reaction products.     

A study on the etch characteristics of HfAlO3 dielectric thin film in Cl2/Ar gas chemistry using inductively coupled plasma system

Thin films of HfAlO₃, a high-k material, were etched using inductively-coupled plasma. The dry etching mechanism of the HfAlO₃ thin film was studied by varying the Cl₂/Ar gas mixing ratio, RF power, direct current bias voltage, and process pressure. The maximum etch rate of the HfAlO₃ thin film was 16.9 nm/min at a C1₂/(C1₂ + Ar) ratio of 80%. Our results showed that the highest etch rate of the HfAlO₃ thin films was achieved by reactive ion etching using Cl radicals, due to the high volatility of the metal-chlorides. Consequently, the increased chemical effect caused an increase in the etch rate of the HfAlO₃ thin film. Surface analysis by x-ray photoelectron spectroscopy showed evidence that Hf, Al and O reacted with Cl and formed nonvolatile metal-oxide compounds and volatile metal-chlorides. This effect may be related to the concurrence of chemical and physical pathways in the ion-assisted chemical reaction.     

Etch characteristics of indium zinc oxide thin films in a C2F6/Ar plasma

Dry etching of indium zinc oxide (IZO) thin films was performed using inductively coupled plasma reactive ion etching in a C₂F₆/Ar gas. The etch characteristics of IZO films were investigated as a function of gas concentration, coil rf power, dc-bias voltage to substrate, and gas pressure. As the C₂F₆ concentration was increased, the etch rate of the IZO films decreased and the degree of anisotropy in the etch profile also decreased. The etch profile was improved with increasing coil rf power and dc-bias voltage, and decreasing gas pressure. An X-ray photoelectron spectroscopy analysis confirmed the formation of InF₃ and ZnF₂ compounds on the etched surface due to the chemical reaction of IZO films with fluorine radicals. In addition, the film surfaces etched at different conditions were examined by atomic force microscopy. These results demonstrated that the etch mechanism of IZO thin films followed sputter etching with the assistance of chemical reaction.     

Etch characteristics of indium zinc oxide thin films using inductively coupled plasma of a Cl2/Ar gas

Inductively coupled plasma reactive ion etching of indium zinc oxide (IZO) thin films masked with a photoresist was performed using a Cl₂/Ar gas. The etch rate of the IZO thin films increased as Cl₂ gas was added to Ar gas, reaching a maximum at 60% Cl₂ and decreasing thereafter. The degree of anisotropy in the etch profile improved with increasing coil rf power and dc-bias voltage. Changes in pressure had little effect on the etch profile. X-ray photoelectron spectroscopy confirmed the formation of InCl₃ and ZnCl₂ on the etched surface. The surface morphology of the films etched at high Cl₂ concentrations was smoother than that of the films etched at low Cl₂ concentrations. These results suggest that the dry etching of IZO thin films in a Cl₂/Ar gas occurs according to a reactive ion etching mechanism involving ion sputtering and a surface reaction.     

HfO2 etching mechanism in inductively-coupled Cl2/Ar plasma

Etching characteristics and the mechanism of HfO₂ thin films in Cl₂/Ar inductively-coupled plasma were investigated. The etch rate of HfO₂ was measured as a function of the Cl₂/Ar mixing ratio in the range of 0 to 100% Ar at a fixed gas pressure (6 mTorr), input power (700 W), and bias power (300 W). We found that an increase in the Ar mixing ratio resulted in a monotonic decrease in the HfO₂ etch rate in the range of 10.3 to 0.7 nm/min while the etch rate of the photoresist increased from 152.1 to 375.0 nm/min for 0 to 100% Ar. To examine the etching mechanism of HfO₂ films, we combined plasma diagnostics using Langmuir probes and quadrupole mass spectrometry with global (zero-dimensional) plasma modeling. We found that the HfO₂ etching process was not controlled by ion-surface interaction kinetics and formally corresponds to the reaction rate-limited etch regime.     

The dry etching property of TiO2 thin films using metal-insulator-metal capacitor in inductively coupled plasma system

In this work, we investigated the etching characteristics of TiO₂ thin films and the selectivity of TiO₂ to SiO₂ in a BCl₃/Ar inductively coupled plasma (ICP) system. The maximum etch rate of 84.68 nm/min was obtained for TiO₂ thin films at a gas mixture ratio of BCl₃/Ar (25:75%). In addition, etch rates were measured as a function of etching parameters, such as the RF power, DC-bias voltage and process pressure. Using the X-ray photoelectron spectroscopy analysis the accumulation of chemical reaction on the etched surface was investigated. Based on these data, the ion-assisted physical sputtering was proposed as the main etch mechanism for the BCl₃-containing plasmas.     

Dry etching of TiN in N2/Cl2/Ar adaptively coupled plasma

We investigated the N₂ additive effect on the etch rates of TiN and SiO₂ and etch profile of TiN in N₂/Cl₂/Ar adaptively coupled plasma (ACP). The mixing ratio of Cl₂ and Ar was fixed at 75 and 25 sccm, respectively. The N₂ flow rate was increased from 0 to 9 sccm under the constant pressure of 10 mTorr. As N₂ flow rate was increased in N₂/Cl₂/Ar plasma, the etch rate of TiN was linearly increased, but that of SiO₂ was increased non-monotonically. The etch profile and the compositional changes of TiN was investigated with field emission-scanning electron microscope (FE-SEM), FE-Auger electron spectroscopy (FE-AES) and x-ray photoelectron spectroscopy (XPS). When 9 sccm N₂ was added into Cl₂/Ar, a steep etch profile and clean surface of TiN was obtained. In addition, the signals of TiN and Ti were disappeared in FE-AES and XPS when N₂ additive flow into Cl₂/Ar was above 6 sccm. From the experimental data, the increase in TiN etch rate was mainly caused by the increase of desorption and evacuation rate of etch by products because of the increased effective pumping speed. The etch mechanism of TiN in N₂/Cl₂/Ar ACP plasma can be concluded as the ion enhanced chemical etch.     

Etch characteristics of HfO2 thin films by using CF4/Ar inductively coupled plasma

In this study, we carried out an investigation of the etching characteristics (etch rate, selectivity) of HfO₂ thin films in the CF₄/Ar inductively coupled plasma (ICP). The maximum etch rate of 54.48 nm/min for HfO₂ thin films was obtained at CF₄/Ar (=20:80%) gas mixing ratio. At the same time, the etch rate was measured as function of the etching parameters such as ICP RF power, DC-bias voltage, and process pressure. The X-ray photoelectron spectroscopy analysis showed an efficient destruction of the oxide bonds by the ion bombardment as well as an accumulation of low volatile reaction products on the etched surface. Based on these data, the chemical reaction was proposed as the main etch mechanism for the CF₄-containing plasmas.     

Inductively coupled plasma reactive ion etching of titanium thin films using a Cl2/Ar gas

Inductively coupled plasma reactive ion etching of titanium thin films patterned with a photoresist using Cl₂/Ar gas was examined. The etch rates of the titanium thin films increased with increasing the Cl₂ concentration but the etch profiles varied. In addition, the effects of the coil rf power, dc-bias voltage and gas pressure on the etch rate and etch profile were investigated. The etch rate increased with increasing coil rf power, dc-bias voltage and gas pressure. The degree of anisotropy in the etched titanium films improved with increasing coil rf power and dc-bias voltage and decreasing gas pressure. X-ray photoelectron spectroscopy revealed the formation of titanium compounds during etching, indicating that Ti films etching proceeds by a reactive ion etching mechanism.     

Etch characteristics of FePt magnetic thin films using inductively coupled plasma reactive ion etching

Etch characteristics of L10 FePt thin films masked with TiN films were investigated using an inductively coupled plasma (ICP) reactive ion etching in a CH₃OH/Ar plasma. As the CH₃OH gas was added to Ar, the etch rates of FePt thin films and TiN hard mask gradually decreased, and the etch profile of FePt films improved with high degree of anisotropy. With increasing ICP rf power and dc-bias voltage to substrate and decreasing gas pressure, the etch rate increased and the etch profile becomes vertical without any redepositions or etch residues. Based on the etch characteristics and surface analysis of the films by X-ray photoelectron spectroscopy, it can be concluded that the etch mechanism of FePt thin films in a CH₃OH/Ar gas does not follow the reactive ion etch mechanism but the chemically assisted sputter etching mechanism, due to the chemical reaction of FePt film with CH₃OH gas.     

Effect of doping elements on ZnO etching characteristics with CH4/H2/Ar plasma

Effect of doping elements on the etching characteristics of doped-ZnO (Ag, Li, and Al) thin films, etched with a positive photoresist (PR) mask, and an etch process window for infinite etch selectivity were investigated by varying the CH₄ flow ratio and self-bias voltage, V_dc, in inductively coupled CH₄/H₂/Ar plasmas. Increased doping of ZnO films decreased the etch rates significantly presumably due to lower volatility of reaction by-products of doped Li, Ag, and Al in CH₄/H₂/Ar plasmas. The etch rate of AZO (Al-doped ZnO) was most significantly decreased as the doping concentration is increased from 4 to 10 wt%. It was found that process window for infinite etch selectivity of the doped ZnO to the PR is closely related to a balance between deposition and removal processes of a-C:H (amorphous hydrogenated carbon) layer on the doped-ZnO surface. Measurements of optical emission of the radical species in the plasma and surface binding states by optical emission spectroscopy (OES) and X-ray photoelectron spectroscopy (XPS), respectively, implied that the chemical reaction of CH radicals with Zn atoms in doped-ZnO play an important role in determining the doped-ZnO etch rate together with an ion-enhanced removal mechanism of a-C:H layer as well as Zn(CH_x)_y etch by-products.     

High density plasma etching of amorphous CoZrNb films for thin film magnetic devices

Inductively coupled plasma reactive ion etching of CoZrNb magnetic thin films was studied using a TiN hard mask in a Cl₂/O₂/Ar gas mix. The etch rates of CoZrNb films and TiN hard mask gradually decreased with increasing Cl₂ or O₂ gas concentrations. When O₂ gas was added in the Cl₂/Ar gas mix, the etch rate of TiN hard mask was suppressed effectively so that the etch selectivity of CoZrNb film to TiN hard mask was enhanced. The addition of O₂ into the gas mix also led to the anisotropic etching of the CoZrNb films and it was confirmed by Auger electron spectroscopy that there were no redeposited materials on the sidewall of the etched films. Highly anisotropic etching of CoZrNb films was achieved at room temperature under the optimized etching conditions.     

Dry etching characteristics of HfAlO3 thin films in BCl3/Ar plasma using inductively coupled plasma system

In this study, we monitored the HfAlO₃ etch rate and selectivity to SiO₂ as a function of the etch parameters (gas mixing ratio, RF power, DC-bias voltage, and process pressure). A maximum etch rate of 52.6 nm/min was achieved in the 30% BCl₃/(BCl₃ + Ar) plasma. The etch selectivity of HfAlO₃ to SiO₂ reached 1.4. As the RF power and the DC-bias voltage increased, the etch rate of the HfAlO₃ thin film increased. As the process pressure decreased, the etch rate of the HfAlO₃ thin films increased. The chemical state of the etched surfaces was investigated by X-ray Photoelectron Spectroscopy (XPS). According to the results, the etching of HfAlO₃ thin films follows the ion-assisted chemical etching mechanism.     

Dry etching of TaN thin film using CH4/Ar inductively coupled plasma

In this research, we investigated the TaN etch rate and selectivity with under layer (HfO₂) and mask material (SiO₂) in inductively coupled CH₄/Ar plasma. As the CH₄ content increased from 0% to 80% in CH₄/Ar plasma, the TaN etch rate was increased from 11.9 to 22.8 nm/min. From optical emission spectroscopy (OES), the intensities for CH [431 nm] and H [434 nm] were increased with the increasing CH₄ content from 0% to 100% in CH₄/Ar plasma. The results of x-ray photoelectron spectroscopy (XPS) and Auger electron spectroscopy (AES) showed no accumulation of etch by-products from the etched surface of TaN thin film. As a result of OES, AES and XPS analysis, we observed the etch by-products from the surfaces, such as Ta-N-CH and N-CH bonds. Based on the experimental results, the TaN etch was dominated by the chemical etching with the assistance of Ar sputtering in reactive ion etching mechanism.     

Etch characteristics of CoFeB magnetic thin films using high density plasma of a H2O/CH4/Ar gas mixture

Etch characteristics of CoFeB magnetic thin films patterned with TiN hard masks were investigated using inductively coupled plasma reactive ion etching in H₂O/Ar and H₂O/CH₄ gas mixes. As the H₂O concentration in the H₂O/Ar gas increased, the etch rates of CoFeB and TiN films decreased simultaneously, while the etch selectivity increased and etch profiles improved slightly without any redeposition. The addition of CH₄ to the H₂O gas resulted in an increase in etch selectivity and a higher degree of anisotropy in the etch profile. X-ray photoelectron spectroscopy was performed to understand the etch mechanism in H₂O/CH₄ plasma. A good pattern transfer of CoFeB films masked with TiN films was successfully achieved using the H₂O/CH₄ gas mix.     

Etching characteristics and mechanism of Pb(Zr,Ti)O3 thin films in CF4/Ar inductively coupled plasma

The effect of the CF₄/Ar mixing ratio on the etching behaviour and mechanisms for Pb(Zr,Ti)O₃ (PZT) thin films in an inductively coupled plasma was carried out. It was found that an increase of Ar mixing ratio causes non-monotonic behaviour of the PZT etch rate, which reaches a maximum of 2.38 nm/s at 80% Ar. Investigating the plasma parameters, we found a weak sensitivity of both electron temperature and electron density to the change of CF₄/Ar mixing ratio. A combination of zero-dimensional plasma model with the model of surface kinetics shows the possibility of a non-monotonic etch rate behaviour due to the concurrence of physical and chemical pathways in the ion-assisted chemical reaction.     

Dry etching of TiN in N2/Cl2/Ar adaptively coupled plasma

We investigated the N₂ additive effect on the etch rates of TiN and SiO₂ and etch profile of TiN in N₂/Cl₂/Ar adaptively coupled plasma (ACP). The mixing ratio of Cl₂ and Ar was fixed at 75 and 25 sccm, respectively. The N₂ flow rate was increased from 0 to 9 sccm under the constant pressure of 10 mTorr. As N₂ flow rate was increased in N₂/Cl₂/Ar plasma, the etch rate of TiN was linearly increased, but that of SiO₂ was increased non-monotonically. The etch profile and the compositional changes of TiN was investigated with field emission-scanning electron microscope (FE-SEM), FE-Auger electron spectroscopy (FE-AES) and x-ray photoelectron spectroscopy (XPS). When 9 sccm N₂ was added into Cl₂/Ar, a steep etch profile and clean surface of TiN was obtained. In addition, the signals of TiN and Ti were disappeared in FE-AES and XPS when N₂ additive flow into Cl₂/Ar was above 6 sccm. From the experimental data, the increase in TiN etch rate was mainly caused by the increase of desorption and evacuation rate of etch by products because of the increased effective pumping speed. The etch mechanism of TiN in N₂/Cl₂/Ar ACP plasma can be concluded as the ion enhanced chemical etch.     

Etch characteristics of IrMn thin films using an inductively coupled plasma of CH3OH/Ar

An inductively coupled plasma reactive ion etching of IrMn magnetic thin films patterned with Ti hard mask was studied in a CH₃OH/Ar gas mix. As the CH₃OH concentration increased, the etch rates of IrMn thin films and Ti hard mask decreased, while the etch profiles improved with high degree of anisotropy. The effects of coil rf power, dc-bias voltage to substrate and gas pressure on the etch characteristics were investigated. The etch rate increased and the etch profile improved with increasing coil rf power, dc-bias voltage and decreasing gas pressure. X-ray photoelectron spectroscopy revealed that the chemical reaction between IrMn films and CH₃OH gas occurred, leading to the clean and good etch profile with high degree of anisotropy of 90°.     

Etching characteristics and mechanism of Ga-doped ZnO thin films in inductively-coupled HBr/X (X = Ar, He, N2, O2) plasmas

We investigated the etch characteristics and mechanisms of Ga-doped ZnO (Ga-ZnO) thin films in HBr/X (X = Ar, He, N₂, O₂) inductively-coupled plasmas. The etch rates of Ga-ZnO thin films were measured as a function of the additive gas fraction in the range of 0-100% for Ar, He, N₂, and O₂ at a fixed gas pressure (6 mTorr), input power (700 W), bias power (200 W), and total gas flow rate (40 sccm). The plasma chemistry was analyzed using a combination of the global (zero-dimensional) plasma model and Langmuir probe diagnostics. By comparing the behavior of the etch rate and fluxes of plasma active species, we found that the Ga-ZnO etch process was not limited by ion-surface interaction kinetics and appeared in the reaction rate-limited etch regime. In the HBr/O₂ plasma, the etch kinetics were probably influenced by oxidation of the etched surface.