Miscible blends of cellulose acetate hydrogen phthalate and poly(vinyl pyrollidone) characterization by viscometry,ultrasound, and DSC

Miscibility characteristics of cellulose acetate hydrogen phthalate (CAP) and poly(vinyl pyrollidone) (PVP) have been investigated by solution viscometric, ultrasonic, and differential scanning calorimetric (DSC) methods. From viscosity measurements, Krigbaum and Wall polymer–polymer interaction parameter Δb was evaluated. Ultrasonic velocity and adiabatic compressibility have been plotted versus blend composition and are found to be linear. Variation of T_g with composition follows Gordon–Taylor equation. T_g values have also been calculated from the Fox equation. The results obtained reveal that CAP forms a miscible blend with PVP in the entire composition range. Compatibility may be due to the formation of hydrogen bonding between the carbonyl group of PVP and the free‐hydroxyl group of CAP. Compatibility has also been confirmed from dielectric measurements. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 859–867, 2000     

The totally miscible in ternary hydrogen‐bonded polymer blend of poly(vinyl phenol)/phenoxy/phenolic

The individual binary polymer blends of phenolic/phenoxy, phenolic/poly(vinyl phenol) (PVPh), and phenoxy/PVPh have specific interaction through intermolecular hydrogen bonding of hydroxyl–hydroxyl group to form homogeneous miscible phase. In addition, the miscibility and hydrogen bonding behaviors of ternary hydrogen bond blends of phenolic/phenoxy/PVPh were investigated by using differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy, and optical microscopy. According to the DSC analysis, every composition of the ternary blend shows single glass transition temperature (T_g), indicating that this ternary hydrogen‐bonded blend is totally miscible. The interassociation equilibrium constant between each binary blend was calculated from the appropriate model compounds. The interassociation equilibrium constant (K_A) of each individually binary blend is higher than any self‐association equilibrium constant (K_B), resulting in the hydroxyl group tending to form interassociation hydrogen bond. Photographs of optical microscopy show this ternary blend possess lower critical solution temperature (LCST) phase diagram. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Competitive hydrogen bonding mechanisms underlying phase behavior of triple poly(N‐vinyl pyrrolidone)–poly(ethylene glycol)–poly(methacrylic acid‐co‐ethylacrylate) blends

Differential scanning calorimetry (DSC) of triple blends of high molecular weight poly(N‐vinyl pyrrolidone) (PVP) with oligomeric poly(ethylene glycol) (PEG) of molecular weight 400 g/mol and copolymer of methacrylic acid with ethylacrylate (PMAA‐co‐EA) demonstrates partial miscibility of polymer components, which is due to formation of interpolymer hydrogen bonds (reversible crosslinking). Because both PVP and PMAA‐co‐EA are amorphous polymers and PEG exhibits crystalline phase, the DSC examination is informative on the phase state of PEG in the triple blends and reveals a strong competition between PEG and PMAA‐co‐EA for interaction with PVP. The hydrogen bonding in the triple PVP–PEG–PMAA‐co‐EA blends has been established with FTIR Spectroscopy. To evaluate the relative strengths of hydrogen bonded complexes in PVP–PEG–PMAA‐co‐EA blends, quantum‐chemical calculations were performed. According to this analysis, the energy of H‐bonding has been found to diminish in the order: PVP–PMAA‐co‐EA–PEG(OH) > PVP–(OH)PEG(OH)–PVP > PVP–H₂O > PVP–PEG(OH) > PMAA‐co‐EA–PEG(? O? ) > PVP–PMAA‐co‐EA > PMAA‐co‐EA–PEG(OH). Thus, most stable complexes are the triple PVP–PMAA‐co‐EA–PEG(OH) complex and the complex wherein comparatively short PEG chains form simultaneously two hydrogen bonds to PVP carbonyl groups through both terminal OH‐groups, acting as H‐bonding crosslinks between longer PVP backbones. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Specific interactions in 4‐hydroxybenzoic acid/poly(2‐vinylpyridine)/poly(N‐vinyl‐2‐pyrrolidone) blends

The specific interactions in ternary 4‐hydroxybenzoic acid (HBA)/poly(2‐vinylpyridine) (P2VPy)/poly(N‐vinyl‐2‐pyrrolidone) (PVP) blends were studied by differential scanning calorimetry, Fourier transform infrared (FTIR) spectroscopy, and electron microscopy. FTIR study shows the existence of hydrogen‐bonding interactions between HBA and P2VPy as well as PVP. The addition of a sufficiently large amount of HBA produces a blend showing one glass‐transition temperature (T_g). Microscopic study shows a drastic reduction in domain size in single‐T_g blends. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 901–907, 2001     

Miscibility enhancement on the immiscible poly (vinyl pyrrolidone) and poly (ethyl methacrylate) with poly (vinyl phenol)

The miscibility behavior of ternary blends of poly (vinyl phenol) (PVPh)/poly (vinyl pyrrolidone) (PVP)/poly (ethyl methacrylate) (PEMA) was investigated mainly with calorimetry. PVPh is miscible with both PVP and PEMA on the basis of the single T_g observed over the entire composition range. FTIR was used to study the hydrogen bonding interaction between the hydroxyl group of PVPh and the carbonyl group of PVP and PEMA at various compositions. Furthermore, the addition of PVPh is able to enhance the miscibility of the immiscible PVP/PEMA and eventually transforms it into a miscible blend, especially when the ratio between PVP/PEMA is 3:1, probably because of favorable physical interaction. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1205–1213, 2006     

Self-Assembly structures through competitive interactions of miscible crystalline-amorphous diblock copolymer/homopolymer blends

A series of miscible crystalline-amorphous diblock copolymers, (poly(?-caprolactone)-b-(vinyl phenol), PCL-b-PVPh) were prepared through sequential ring-opening and controlled living free radical (nitroxide-mediated) polymerizations and then blended with poly(vinyl pyrrolidone) (PVP) homopolymer. Specific interactions, miscibility, and self-assembly morphologies mediated by hydrogen bonding interactions of this new A-B/C type blend, were investigated in detail. Micro-phase separation of these miscible PCL-b-PVPh diblock copolymers occurs by blending with PVP through competitive hydrogen bonding interaction in this A-B/C blend. FTIR, XRD, and DSC analyses provide positive evidences that the carbonyl group of PVP is a significantly stronger hydrogen bond acceptor than PCL, thus the PCL block is excluded from the PVPh/PVP miscible phase to form self-assembly structure. ¹³C CP/MAS solid-state NMR spectra provide additional evidence confirming that micro-phase separation occurs in the blend system because of the presence of more than two T_1ρ(H) values for this A-B/C blend system. According to the result of the FTIR and SAXS results, the smaller molecular weight system contains a greater fraction of the hydrogen-bonded carbonyl group, cause indirectly the high degree of phase separation among these blends. In addition, the SAXS profiles possess a sharp primary peak and highly long range ordered reflections q/q^∗ ratios of 1:2:3 at lower PVP content, an indication of the lamellar structure in the blend which is consistent with TEM image. The phase behavior and morphology shifts from lamellar to cylinder structure with further increase in the PVP content.     

Intermolecular and intramolecular hydrogen bonding of poly(dimethylsiloxane)urethane‐graft–poly(methyl methacrylate) copolymers based on 2,4‐TDI and m‐XDI

In this study, poly(dimethylsiloxane)urethane–graft–poly(methyl methacrylate) (PDMS urethane–g–PMMA) copolymers with low crosslinking density were synthesized. Glass transition temperatures of the copolymers were investigated by dynamic mechanical analysis (DMA) and differential scanning calorimetry (DSC). Results confirm that PDMS urethane–g–PMMA is miscible in the 2,4‐TDI (2,4‐ toluene diisocyanate) system, whereas it is partially miscible in the m‐XDI (m‐xylene diisocyanate) system. Free, intra‐ (urethane–urethane), and inter‐ (urethane–ester) association hydrogen bonding exist in the urethane group of copolymers. The inter‐association hydrogen bonding can improve the compatibility of the copolymer components. The relationship between the frequency shift and enthalpy confirm the distribution of hydrogen bonding in the macromonomer and copolymer. Ninety percent of the hydrogen bonding is by interassociation in the 2,4‐TDI system. The intra‐association hydrogen bonding in the m‐XDI system is higher than that in the 2,4‐TDI system. Consequently, aggregation may occur easily in the siloxane‐grafted chain in the m‐XDI system. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 962–972, 2002     

Fumed SiO2 nanoparticle reinforced biopolymer blend nanocomposites with high dielectric constant and low dielectric loss for flexible organic electronics

In the present study, fumed silica (SiO₂) nanoparticle reinforced poly(vinyl alcohol) (PVA) and poly(vinylpyrrolidone) (PVP) blend nanocomposite films were prepared via a simple solution‐blending technique. Fourier transform infrared spectroscopy (FTIR), ultraviolet–visible spectroscopy (UV–vis), X‐ray diffraction (XRD), and scanning electron microscopy (SEM) were employed to elucidate the successful incorporation of SiO₂ nanoparticles in the PVA/PVP blend matrix. A thermogravimetric analyzer was used to evaluate the thermal stability of the nanocomposites. The dielectric properties such as dielectric constant (?) and dielectric loss (tan δ) of the PVA/PVP/SiO₂ nanocomposite films were evaluated in the broadband frequency range of 10^?2 Hz to 20 MHz and for temperatures in the range 40–150 °C. The FTIR and UV–vis spectroscopy results implied the presence of hydrogen bonding interaction between SiO₂ and the PVA/PVP blend matrix. The XRD and SEM results revealed that SiO₂ nanoparticles were uniformly dispersed in the PVA/PVP blend matrix. The dielectric property analysis revealed that the dielectric constant values of the nanocomposites are higher than those of PVA/PVP blends. The maximum dielectric constant and the dielectric loss were 125 (10^?2 Hz, 150 °C) and 1.1 (10^?2 Hz, 70 °C), respectively, for PVA/PVP/SiO₂ nanocomposites with 25 wt % SiO₂ content. These results enable the preparation of dielectric nanocomposites using a facile solution‐casting method that exhibit the desirable dielectric performance for flexible organic electronics. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44427.     

Miscibility enhancement on the immiscible binary blend of poly(vinyl acetate) and poly(vinyl pyrrolidone) with bisphenol A

The miscibility behavior and hydrogen bonding of ternary blends of bisphenol A (BPA)/poly(vinyl acetate) (PVAc)/poly(vinyl pyrrolidone) (PVP) were investigated by using differential scanning calorimetry and Fourier transform infrared spectroscopy (FTIR). The BPA is miscible with both PVAc and PVP based on the observed single T_g over the entire composition range. FTIR was used to study the hydrogen-bonding interaction between the hydroxyl group of BPA and the carbonyl group of PVAc and PVP at various compositions. Furthermore, the addition of BPA is able to enhance the miscibility of the immiscible PVAc/PVP binary blend and eventually transforms into miscible blend with single T_g, when a sufficiently quantity of the BPA is present due to the significant Δχ and the ΔK effect.     

Relation of glass transition temperature to the hydrogen bonding degree and energy in poly(N-vinyl pyrrolidone) blends with hydroxyl-containing plasticizers: 3. Analysis of two glass transition temperatures featured for PVP solutions in liquid poly(ethylene glycol)

The phase behaviour of poly(N-vinyl pyrrolidone)-poly(ethylene glycol) (PVP-PEG) blends has been examined in the entire composition range using Temperature Modulated Differential Scanning Calorimetry (TM-DSC) and conventional DSC techniques. Despite the unlimited solubility of PVP in oligomers of ethylene glycol, the PVP-PEG system under consideration demonstrates two distinct and mutually consistent glass transition temperatures (T_g) within a certain concentration region. The dissolution of PVP in oligomeric PEG has been shown earlier (by FTIR spectroscopy) to be due to hydrogen bonding between carbonyl groups in PVP repeat units and complementary hydroxyl end-groups of PEG chains. Forming two H-bonds through both terminal OH-groups, PEG acts as a reversible crosslinker of PVP macromolecules. To characterise the hydrogen bonded complex formation between PVP (M_w=10⁶) and PEG (M_w=400) we employed an approach described in the first two papers of this series that is based on the modified Fox equation. We evaluated the fraction of crosslinked PVP units and PEG chains participating to the complex formation, the H-bonded network density, the equilibrium constant of complex formation, etc. Based on the established molecular details of self-organisation in PVP-PEG solutions, we propose a three-stage mechanism of PVP-PEG H-bonded complex formation/breakdown with increase of PEG content. The two observed T_gs are assigned to a coexisting PVP-PEG network (formed via multiple hydrogen bonding between a PEG and PVP) and a homogeneous PVP-PEG blend (involving a single hydrogen bond formation only). Based on the strong influence of coexisting regions on each other and the absence of signs of phase separation (evidenced by Optical Wedge Microinterferometry) we conclude that the PVP-PEG blend is fully miscible on a molecular scale.     

Preparation,characterization, electrical and antibacterial properties of sericin/poly(vinyl alcohol)/poly(vinyl pyrrolidone) composites

In this study, we focused on the fabrication of poly(vinyl alcohol) (PVA)/poly(vinyl pyrrolidone) (PVP)/sericin composites via a simple solution‐blending method. The composites were characterized by Fourier transform infrared (FTIR) spectroscopy, UV spectroscopy, X‐ray diffraction (XRD), scanning electron microscopy (SEM), differential scanning calorimetry, thermogravimetric analysis (TGA), and measurements of the conductivity, tensile strength, and antibacterial activity against Staphylococcus aureus. The results of FTIR and UV spectroscopy implied the occurrence of hydrogen bonding between sericin and the PVA/PVP blend. The structure and morphology, studied by XRD and SEM, revealed that the sericin particles were well dispersed and arranged in an orderly fashion in the blend. The glass‐transition temperature (T_g) of the composite was higher than that of the pure blend, and the T_g value shifted toward higher temperatures when the volume fraction of sericin increased. TGA indicated that sericin retarded the thermal degradation; this depended on the filler concentration. The mechanical and electrical properties, such as the tensile strength, alternating‐current electrical conductivity, dielectric constant, and dielectric loss of the composites, were higher than those of the pure blend, and these properties were enhanced when the concentration of sericin was increased up to 10 wt % filler content, whereas the elongation at break of the composite decreased with the addition of sericin particles. The antibacterial properties of the composite showed that sericin had a significant inhibitory effect against S. aureus. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43535.     

Thermodynamic hydrogen bonding inpoly(styrene‐co‐acrylic acid)/poly(styrene‐co‐4‐N,N‐dimethylacrylamide) blends

FTIR study of the hydrogen bonding interactions within blends of different ratios of poly(styrene‐co‐acrylic acid) containing 18, 27, and 32 mol% of acrylic acid (SAA) and poly(styrene‐co‐N,N‐dimethylacrylamide) containing 17 mol% of N,N‐dimethylacrylamide (SAD‐17) was carried out qualitatively and quantitatively in the temperature range varying from room temperature to 210°C. Two new bands characterizing these interactions appeared in the 1800–1550 cm^–1 region at 1730 cm^–1 and 1616 cm^–1 and are attributed to “liberated” carbonyl group of the acidic copolymer and the “associated amide” carbonyl group, respectively. Equilibrium constants describing both the self‐association K₂ and inter‐association K_A and the enthalpy of hydrogen bonding formation in the different blends were experimentally determined using a curve fitting analysis of the infra‐red spectra as a function of temperature using the appropriate equations derived from the Painter‐Coleman association model. The obtained results confirm the miscibility of these blends in the considered temperature range from the negative values of the total free energy of mixing ΔG_M. Optimization of the extent of intermolecular interactions between the two polymers in these blends is investigated. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers     

Rheology of poly(N‐vinyl pyrrolidone)–poly(ethylene glycol) adhesive blends under shear flow

The rheological properties of adhesive miscible blends of high‐molecular‐weight poly(N‐vinyl pyrrolidone) (PVP) with short‐chain poly(ethylene glycol) (PEG) under oscillatory and steady‐state shear flow have been examined with dynamic mechanical and squeezing‐flow analysis. The latter allows the rheological characterization of adhesive blends under conditions modeling adhesive‐bond formation as a fixed compressive force is applied to an adhesive film. The most adhesive PVP blend with 36 wt % PEG has been established to flow like a viscoplastic (yield stress) liquid with a power‐law index of about 0.12. The study of the apparent yield stress as a function of the PVP–PEG composition, content of sorbed water, molecular weight of PVP, and temperature shows that the occurrence of a yield stress in the blends results most likely from a noncovalent crosslinking of PVP macromolecules through short PEG chains by means of hydrogen bonding of both terminal OH groups of PEG to the complementary functional groups in PVP monomer units. A molecular mechanism of PVP–PEG interaction was established earlier by direct and independent methods. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 522–537, 2006     

Characteristics of poly(vinyl pyrrolidone)/poly(acrylic acid) interpolymer complex prepared by template polymerization of acrylic acid: Effect of reaction solvent and molecular weight of template

Poly(vinyl pyrrolidone) (PVP)/poly(acrylic acid) (PAA) interpolymer complexes were prepared, in ethanol or dimethylformamide (DMF), by template polymerization of acrylic acid in the presence of PVP (MW: 42.5 or 1100 K) used as the template. FTIR analysis showed that the complexes were formed through hydrogen bonding between the carboxyl groups of the PAA and the carbonyl groups of the PVP. The glass‐transition temperature (T_g) of the complex, prepared in ethanol, was higher than that of the component polymers, whereas the T_g of the complex, prepared in DMF, was located between that of the component polymers. The dissolution rate of the complex was affected by the molecular weight of the PVP and the reaction solvent. The release rate of ketoprofen from the complexes showed a pH dependency, and was slower at a lower pH. The ketoprofen release rate from the complex was controlled mainly by the dissolution rate of the complex above the pK_a of PAA (4.75) and by the diffusion rate below the pK_a. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2390–2394, 2004     

Synthesis of high molecular weight polyoxyethylene with a quaternary catalyst and study of its conductive blends with poly(2‐vinyl pyridine)

High molecular weight polyoxyethylene (PEO) was synthesized by using a quaternary catalyst composed of triisobutyl aluminum, phosphoric acid, water, and N,N‐dimethylaniline (DMA). Optimum synthesis conditions and some properties of the product were studied. This catalyst showed high activity and the molecular weight of the polyoxyethylene obtained can approach one million. The activity of polymerization mainly depends upon the composition of catalyst. The optimum composition is as follows: i‐Bu₃Al:H₃PO₄:H₂O:DMA = 1 : 0.17 : 0.17 : 0.10–0.15 (molar ratio).The active centers of the catalyst was thus proposed. The high molecular weight PEO synthesized by this catalyst was blended with poly(2‐vinyl pyridine) (PVP) and then doped with LiClO₄ and TCNQ to obtain a conductive elastomeric material. Ionic, electronic, and mixed (ionic–electronic) conductivities of blends were investigated. At a Li/EO molar ratio of 0.1 and a TCNQ/VP molar ratio of 0.5, the mixed conductivity of the blend of PEO/PVP/LiCIO₄/TCNQ is higher than the sum of ionic conductivity of PEO/PVP/LiCIO₄ and electronic conductivity of PEO/PVP/TCNQ, when the weight ratio of PEO to PVP is 6/4 or 5/5. It can reach 4 × 10^?6 S/cm at room temperature. Differential scanning calorimetry, thermal gravimetric analysis, and the appearance of the blend showed that both TCNQ and LiClO₄ can complex with PEO and PVP, thus enhancing the compatibility between PEO and PVP. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Performances of poly(vinylidene fluoride‐co‐hexafluoropropylene) ultrafiltration membranes modified with poly(vinyl pyrrolidone)

The structure and performance of modified poly(vinylidene fluoride‐co‐hexafluoropropylene) (PVdF‐co‐HFP) ultra‐filtration membranes prepared from casting solutions with different concentrations of poly(vinyl pyrrolidone) (PVP) were investigated in this study. Membrane properties were studied in terms of membrane compaction, pure water flux (PWF), water content (WC), membrane hydraulic resistance ( R _m), protein rejection, molecular weight cut‐off (MWCO), average pore size, and porosity. PWF, WC, and thermal stability of the blend membranes increased whereas the crystalline nature and mechanical strength of the blend membranes decreased when PVP additive concentration was increased. The contact angle (CA) decreased as the PVP concentration increased in the casting solution, which indicates that the hydro‐philicity of the surface increased upon addition of PVP. The average pore size and porosity of the PVdF‐co‐HFP membrane increased to 42.82 Å and 25.12%, respectively, when 7.5 wt% PVP was blended in the casting solution. The MWCO increased from 20 to 45 kDa with an increase in PVP concentration from 0 to 7.5 wt%. The protein separation study revealed that the rejection increased as the protein molecular weight increased. The PVdF‐co‐HFP/PVP blended membrane prepared from a 7.5 wt% PVP solution had a maximum flux recovery ratio of 74.3%, which explains its better antifouling properties as compared to the neat PVdF‐co‐HFP membrane. POLYM. ENG. SCI., 55:2482–2492, 2015. © 2015 Society of Plastics Engineers     

Microwave dielectric relaxation and molecular dynamics in binary mixtures of poly(vinyl pyrrolidone)–poly(ethylene glycol)s in non‐polar solvent

Dielectric relaxation study of binary mixtures of poly(vinyl pyrrolidone) (PVP) (M_w = 40 000 g mol^?1) and poly(ethylene glycol)s (PEGs) (M_n = 200, 400 and 600 g mol^?1) with concentration variation was carried out in dilute solutions of benzene at 10.1 GHz and 35 °C. The average relaxation time τ_o, corresponding to segmental motion τ₁ and group rotations τ₂ was determined for PVP–PEGs mixtures. A comparison of these mixtures relaxation times was made with the relaxation times of PEGs in benzene solvent. The evaluated τ_o values of PVP–PEGs mixtures in benzene solution are assigned to the reorientation of PEG molecules. It has been observed that the τ_o value of PVP–PEG200 mixtures increases with increasing concentration of PVP but their values are small in comparison with the τ_o value of PEG200 molecules. In the case of PVP–PEG400 and PVP–PEG600 mixtures, the evaluated values of τ_o are greater than the corresponding τ_o values of PEG400 and PEG600 molecules in benzene solvent. The variation in τ_o values in these systems has been discussed by considering the stretching effect in the PEGs molecular chains in PVP–PEGs mixtures in benzene solutions. The high value of distribution parameter α (≈0.4 to 0.7) suggests that in these mixtures there is a large contribution of segmental motion and group rotations to the relaxation processes. The nature of the formation of hydrogen‐bonded PVP–PEG complex heterogeneous network due to hydrogen bonding between carbonyl groups of PVP monomer units and terminal hydroxyl groups of PEGs is discussed. Furthermore, the elongation behaviour of PVP–PEG complex networks in benzene solvent and the molecular dynamics in the mixture due to breaking and reforming of hydrogen bonds has been explored by comparing the evaluated relaxation times and the Kirkwood correlation factor of pure PEG molecules for their possible use in drug control release systems. The relaxation times of these mixtures are independent of their viscosity, but the elongation of the mixture network is influenced by the PEG chain length and the number of hydroxyl groups in comparison with the number of carbonyl groups in the mixtures. Copyright © 2003 Society of Chemical Industry     

Interface adhesion properties of syndiotactic polypropylene/cellulose group composite: Relationship between chemical structure of coupling agent and reactivity for cellulose group

Reinforcement of interfacial adhesion between syndiotactic polypropylene (SPP) and fibrous pure cellulose (FC) was performed by the FC silanizations with 3‐aminopropyltrimethoxysilane (APTMS), with hexyltrimethoxysilane (HTMS) and by an addition of a SPP grafted with dimethyl itaconate (SPP‐g‐DMI: number‐average molecular weight = 3.3 × 10⁴, DMI cont. = 0.11 wt %), respectively. The adhesion and the morphology were improved by them, respectively. However, their behavior was considerably different. The hexyl group in the HTMS converted the FC surface into hydrophobicity, leading to the hindrance of the interhydrogen bonding in the FC. The silanized FC was embrittled with the increase of the degree of the silanization. In the case of the APTMS, the inter hydrogen bonding was kept because of the existence of the amino group. Whereas, the SPP‐g‐DMI was unable to penetrate into the cellulose because of its higher molecules, and the interhydrogen bonding was not hindered. The keeping the inter hydrogen bonding was important for the reinforcement of the tensile properties such as Young's modulus and tensile strength in the composite. Furthermore, the interfacial adhesion between the SPP and holocellulose (HC) was studied as well as the SPP/FC. Although the tensile properties were slightly improved by the APTMS silanization and by the addition of the SPP‐g‐DMI, respectively, the reactivity of the HC was much less than that of the FC. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Properties and pervaporation characteristics of chitosan–poly(N‐vinyl‐2‐pyrrolidone) blend membranes for MeOH–MTBE

Clear blends of chitosan with poly(N‐vinyl‐2‐pyrrolidone) (PVP) made from aqueous solutions appear to be miscible from visual appearance. Infrared (IR) spectra used to investigate the carbonyl—hydroxyl hydrogen bonding in the blends indicated compatibility of two polymers on a molecular level. The IR spectra were also used to determine the interaction change accessing with increasing temperature and indicated that a significant conformational change occurred. On the other hand, the blend membranes were evaluated for separation of methanol from methyl tert‐butyl ether. The influences of the membrane and the feed compositions were investigated. Methanol preferentially permeates through all the tested membranes, and the partial flux of methanol significantly increase with the poly(N‐vinyl‐2‐pyrrolidone) content increasing. The temperature dependence of pervaporation performance indicated that a significant conformational change occurred with increasing temperature. Combined with the IR results, the pervaporation properties are in agreement with characteristics of interaction between chain–chain within the blend membranes. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1452–1458, 1999     

Study on the thermal behaviors and the morphology in PVP and nylon 6 blends

In this report, polyamides were solution blended in the formic acid with poly(vinyl pyrrolidone)(PVP), an amorphous polar polyamide. The thermal behaviors and morphological change in the blends of Nylon 6 (PA6) and PVP were investigated in details via WAXD, DSC, FT‐IR and POM methods. The equilibrium melting temperatures for PA6 in the blends were estimated based on the linear and nonlinear Hoffman‐Weeks (LHW and NLHW) extrapolative methods. With increasing the mass ratio of PVP to PA6, T_m (melting temperature) and T_c (crystallization temperature) of PA6 in blends both decreased as well as that of the spherulite size of PA6. The interaction mode between PVP and PA6 was investigated by FT‐IR spectroscopy, and the spectral changes indicated that the carbonyl groups of PVP had formed hydrogen bonding with the N? H groups of PA6 molecules in the molten state, which resulted in the variation of the morphology and thermal behaviors. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011