Graft copolymerization of methyl acrylate onto poly(vinyl alcohol) initiated by potassium diperiodatonickelate(IV)

The graft copolymerization of methyl acrylate onto poly(vinyl alcohol) (PVA) with a potassium diperiodatonickelate(IV) [Ni(IV)]–PVA redox system as an initiator was investigated in an alkaline medium. The grafting parameters were determined as functions of the temperature and the concentrations of the monomer and initiator. The structures of the graft copolymers were confirmed by Fourier transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction, differential scanning calorimetry, and thermogravimetric analysis. The Ni(IV)–PVA system was found to be an efficient redox initiator for this graft copolymerization. A single‐electron‐transfer mechanism was proposed for the formation of radicals and the initiation. Other acrylate monomers, such as methyl methacrylate, ethyl acrylate, n‐butyl acrylate, and n‐butyl methacrylate, were used as reductants for graft copolymerization. These reactions definitely occurred to some degree. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 529–534, 2003     

Graft copolymerization of methyl acrylate onto cellulose initiated by potassium ditelluratoargentate(III)

A novel redox system, potassium ditelluratoargentate(III) (DTA)–cellulose, was employed to initiate the graft copolymerization of methyl acrylate onto cellulose in alkali aqueous solution. Grafting parameters, such as total conversion, grafting efficiency and grafting yield, were evaluated comparatively. The dependence of these parameters on temperature, reaction time, initiator concentration and ratio of monomer to cellulose was also investigated. Graft copolymers with high grafting parameters were obtained, which indicated that the DTA–cellulose redox pair is an efficient initiator for cellulose grafting. The proof of grafting was obtained from gravimetric analysis and infrared spectra. A tentative mechanism involving a two‐step single‐electron‐transfer process of DTA is proposed to explain the generation of radicals and initiation. Thermogravimetry, X‐ray diffraction and scanning electron microscopy were also carried out to study the thermal stability, crystallinity and morphology of the grafted copolymers. Copyright © 2004 Society of Chemical Industry     

Chlorohydrin water swellable rubber compatibilized by an amphiphilic graft copolymer. I. Synthesis and characterization of compatibilizer PVA‐g‐PBA

The graft copolymerization of butyl acrylate onto poly(vinyl alcohol) with ceric ammonium nitrate as redox initiator in a aqueous medium has been investigated. The formation of graft copolymer was confirmed by means of IR, scanning electron microscopy (SEM), and wide‐angle X‐ray diffraction (WAXD). The percentage of mononer conversion and percentage of grafting varied with concentrations of initiator, nitric acid, monomer, macromolecular backbone (X_n = 1750, M = 80 000), reaction temperature and reaction time. Some inorganic salts and organic solvents have a great influence upon grafting. The reaction mechanism has been explored, and rate equations for the reaction are established. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 977–986, 2000     

Graft copolymerizaztion of methyl acrylate onto chitosan initiated by potassium diperiodatocuprate (III)

A novel redox system, potassium diperiodatocuprate [Cu (III)–chitosan], was employed to initiate the graft copolymerization of methyl acrylate (MA) onto chitosan in alkali aqueous solution. The effects of reaction variables such as monomer concentration, initiator concentration, pH and temperature were investigated. By means of a series of copolymerization reactions, the grafting conditions were optimized. Cu (III)–chitosan system was found to be an efficient redox initiator for this graft copolymerization. The structures and the thermal stability of chitosan and chitosan‐g‐poly(methyl acrylate) (PMA) were characterized by infrared spectroscopy (IR) and thermogravimetric analysis (TGA). In this article, a mechanism is proposed to explain the formation of radicals and the initiation. Finally, the graft copolymer was used as the compatibilizer in blends of poly(vinyl chloride) (PVC) and chitosan. The scanning electron microscope (SEM) photographs and differential scanning calorimetry (DSC) thermograms indicate that the graft copolymer improved the compatibility of the blend. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2283–2289, 2003     

Preparation and characterization of ultra‐low molecular weight poly(vinyl alcohol) graft copolymer

Graft reaction of acrylamide (AM) and 4‐vinyl pyridine (4‐VP) onto ultra‐low molecular weight poly(vinyl alcohol) by ceric (IV) ion initiation had been systematically investigated; and the graft conditions were optimized by studying the effect of monomer/initiator concentration, solvents composition, reaction time and temperature. At optimized conditions, the maximum grafting efficiency and grafting ratio was ～ 50% and 51%, respectively with the presence of AM, whereas they decreased to 19% and 23%, respectively, without the presence of AM. Thermogravimetric analysis showed that as‐resulted graft copolymer had a lower thermal stability than homopolymer PVA. FTIR and ¹H‐NMR confirmed chemical structure of as‐synthesized graft copolymer. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation and characterization of polyaniline N‐grafted with poly(ethyl acrylate) synthesized via atom transfer radical polymerization

Polyaniline (PANI) N‐grafted with poly(ethyl acrylate) (PEA) was synthesized by the grafting of bromo‐terminated poly (ethyl acrylate) (PEA‐Br) onto the leucoemeraldine form of PANI. PEA‐Br was synthesized by the atom transfer radical polymerization of ethyl acrylate in the presence of methyl‐2‐bromopropionate and copper(I) chloride/bipyridine as the initiator and catalyst systems, respectively. The leucoemeraldine form of PANI was deprotonated by butyl lithium and then reacted with PEA‐Br to prepare PEA‐g‐PANI graft copolymers containing different amounts of PEA via an N‐grafting reaction. The graft copolymers were characterized by Fourier transform infrared spectroscopy, elemental analysis, and thermogravimetric analysis. Solubility testing showed that the solubility of PANI in chloroform was increased by the grafting of PEA onto PANI. The morphology of the PEA‐g‐PANI graft copolymer films was observed by scanning electron microscopy to be homogeneous. The electrical conductivity of the graft copolymers was measured by the four‐probe method. The results show that the conductivity of the PANI decreased significantly with increasing grafting density of PEA onto the PANI backbone up to 7 wt % and then remained almost constant with further increases in the grafting percentage of PEA. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Reaction kinetics of graft copolymerization and thermochemical studies of the degradation of poly(vinyl alcohol) graft copolymer

Poly(vinyl alcohol) (PVA) is a water‐soluble and biomedical polymer. 2‐Acrylamido‐2‐methyl‐1‐propanesulfonic acid was grafted onto PVA using ammonium persulfate as radical initiator. The influences of synthesis conditions such as temperature, concentrations of initiator, PVA and monomer were investigated. Both the initial rate of grafting and the final percentage of grafting were increased by an increase in reaction temperature. The reaction kinetics were studied to determine the rate constants of the first‐order reactions. An activation energy of 16.3 kJ mol^?1 was found for the grafting reaction. The graft copolymers were characterized by IR and intrinsic viscosity measurements. A proposed mechanism of the grafting reaction is discussed. Kinetics of the thermal degradation were studied using a thermogravimetric method and the order of thermal stabilities are given. The apparent activation thermodynamic parameters, E_a, ΔH*, ΔS* and ΔG* were determined and correlated to the thermal stabilities of the homo‐ and grafted polymers. © 2001 Society of Chemical Industry     

Graft copolymerization of methyl acrylate onto nylon1010 initiated by potassium diperiodatonickelate(IV)

In this article, the graft copolymerization of methyl acrylate (MA) onto nylon1010 by using potassium diperiodatonickelate(IV) [Ni(IV)]–nylon1010 redox system as initiator was studied in alkaline medium. The effect of different factors on grafting parameters was investigated. The structure of the graft copolymer was determined by infrared (IR), X-ray diffraction, and scanning electron microscope (SEM). It was found that Ni(IV)–nylon1010 system is an efficient redox initiator for this graft copolymerization. A single-electron transfer mechanism is proposed to explain the formation of radicals and the initiation. The graft copolymer was used as the compatibilizer in blends of poly(methyl methacrylate) (PMMA) and nylon1010. The SEM photographs indicate that the graft copolymer greatly improved the compatibility of the blend. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 2636–2640, 2001     

Optimized conditions for the grafting reaction of poly(methyl acrylate) onto rubberwood fiber

Graft copolymerization of poly(methyl acrylate) (PMA) onto rubberwood fiber (RWF) was carried out by free radical initiation. Hydrogen peroxide and ferrous ions were used as an initiator system. Effects of various parameters (reaction temperature and reaction time, as well as hydrogen peroxide, ferrous ammonium sulfate and monomer concentrations) on the grafting percentage were investigated. A high percentage of grafting was achieved when optimum reaction conditions were used. The optimum temperature of the reaction was determined to be about 55 °C and the reaction time was 120 min. The optimum concentration of H₂O₂ was 0.03 M and the amounts of Fe²⁺ and MA were 0.4 mmol and 0.05 mol, respectively. The PMA homopolymer was removed from the graft copolymer by Soxhlet extraction using acetone. The presence of PMA on the fiber was confirmed by FT-IR spectroscopy and gravimetry. The surface morphology of the poly(methyl acrylate)-graft-(rubberwood fiber) was studied by means of scanning electron microscopy. Copyright © 2004 Society of Chemical Industry     

两亲性接枝共聚物PVA-g-PBA的合成与表征

以过硫酸钾 (KPS)为引发剂 ,将丙烯酸丁酯 (BA)接枝到聚乙烯醇 (PVA)上 ,制得两亲性接枝共聚物 PVA-g-PBA。用红外光谱、X射线衍射表征了接枝物 ,研究了引发剂浓度、单体浓度及反应时间对单体转化率、接枝率和接枝效率和接枝率对共聚物吸水性能的影响。结果表明在水介质中 ,氮气保护下 ,70℃时 ,以过硫酸钾 (KPS)为引发剂 ,将丙烯酸丁酯 (BA)接枝到聚乙烯醇 (PVA)上 ,[PVA]为 2 .5× 1 0 -4mol/ L,[BA]为 0 .63 mol/ L、[KPS]为 5 .5 5× 1 0 -4时 ,反应 5 h,能获得较高 CM、G和 Ge的接枝物。接枝物的接枝率越高 ,吸水率越低 ,吸水 1 0 h达平衡 ,最大平衡吸水率为 1 88.8%。     

Solid‐state grafting of succinic anhydride onto poly(vinyl alcohol)

The graft reaction of succinic anhydride onto poly(vinyl alcohol) (PVA) was catalyzed by p‐toluenesulfonic acid monohydrate in solid state. The infrared spectra and ¹H‐NMR spectra confirmed that succinic anhydride was successfully grafted onto PVA backbone. The influences of reaction temperature, reaction time, the amount of succinic anhydride, and the amount of catalyst on the graft reaction were studied. Uncrosslinked PVA graft copolymer with grafting degree up to about 6.5% could be obtained under low reaction temperature, short reaction time, and low amount of catalyst, whereas crosslinked PVA with high gel content could be obtained under high reaction temperature, long reaction time, and high amount of catalyst. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 848–852, 2007     

Kinetics of graft copolymerization of poly(hexanedioic acid ethylene glycol) and methyl acrylate initiated by potassium diperiodatocuprate(III)

A redox system, potassium diperiodatocuprate(III) [DPC]/poly(hexanedioic acid ethylene glycol) (PEA) system, was employed to initiate graft copolymers of methyl acrylate (MA) and PEA in alkaline medium. The results indicate that the equation of the polymerization rate (R_p) is as follows: R_p = k [MA]^1.62[Cu(III)]^0.69, and that the overall activation energy of graft polymerization is 42.5 kJ/mol. The total conversion at different conditions (concentration of reactants, temperature, concentration of the DPC, and reaction time) was also investigated. The infrared spectra proved that the graft copolymers were synthesized successfully. Some basic properties of the graft copolymer were studied by instrumental analyses, including thermogravimetry and scanning electron microscope. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2376–2381, 2007     

Grafting of methyl methacrylate onto sodium alginate initiated by potassium ditelluratoargentate(III)

Sodium alginate (SA) was graft‐copolymerized with methyl methacrylate in an alkali aqueous solution with potassium ditelluratoargentate(III) (DTA) as the initiator. Graft copolymers with both a high grafting efficiency (>90%) and a high percentage of grafting were obtained, which indicated that the DTA–SA redox pair was an efficient initiator for this grafting. The grafting parameters, including total conversion, grafting efficiency, and percentage grafting, were evaluated comparatively. The dependence of these parameters on temperature and time, monomer concentration, initiator concentration, and SA backbone concentration was also investigated. The overall activation energy of this grafting was calculated as 37.50 kJ/mol. Proof of grafting was obtained from gravimetric analysis and IR spectra. A tentative mechanism involving a two‐step, single‐electron‐transfer process of DTA is proposed to explain the generation of radicals and the initiation of grafting. Some basic properties of the grafted copolymer were studied by instrumental analyses, including thermogravimetry, X‐ray diffraction, and scanning electron microscopy. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1688–1694, 2005     

Synthesis and characterization of poly(vinyl chloride‐co‐vinyl acetate)‐graft‐poly[(meth)acrylates] by atom transfer radical polymerization

The graft polymerization of methyl methacrylate and butyl acrylate onto poly(vinyl chloride‐co‐vinyl acetate) with atom transfer radical polymerization (ATRP) was successfully carried out with copper(I) thiocyanate/N,N,N′,N′,N″‐pentamethyldiethylenetriamine and copper(I) chloride/2,2′‐bipyridine as catalysts in the solvent N,N‐dimethylformamide. For methyl methacrylate, a kinetic plot of ln([M]₀/[M]) (where [M]₀ is the initial monomer concentration and [M] is the monomer concentration) versus time for the graft polymerization was almost linear, and the molecular weight of the graft copolymer increased with increasing conversion, this being typical for ATRP. The formation of the graft polymer was confirmed with gel permeation chromatography, ¹H‐NMR, and Fourier transform infrared spectroscopy. The glass‐transition temperature of the copolymer increased with the concentration of methyl methacrylate. The graft copolymer was hydrolyzed, and its swelling capacity was measured. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 183–189, 2005     

Graft copolymerization of methyl acrylate onto chitosan initiated by potassium diperiodatoargentate (III)

A novel efficient redox system—potassium diperiodatoargentate [Ag(III)]‐chitosan—was employed to initiate the graft copolymerization of methyl acrylate (MA) onto chitosan in aqueous alkali solution. The effects of reaction variables such as monomer concentration, initiator concentration, reaction time, and temperature were investigated and the grafting conditions were optimized. The structures and the thermal stability of chitosan and chitosan‐g‐PMA were characterized by infrared spectroscopy (IR) and thermogravimetric analysis (TGA). The solubility of chitosan‐g‐PMA in some mixed solvent was tested. The graft copolymer was shown to be an effective compatibilizer in blends of poly(vinyl chloride) (PVC) and chitosan. Finally, a mechanism is proposed to explain the formation of radicals and the initiation. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 799–804, 2006     

Ni(Ⅳ)引发丙烯酸甲酯与三元尼龙接枝共聚反应的研究

以二过碘酸合镍(Ⅳ)钾〔Ni(Ⅳ)〕为氧化剂,共聚尼龙上的弱的还原基团(酰胺基)为还原剂,组成氧化还原引发体系,于碱性介质中直接在共聚尼龙分子骨架上产生接枝点,引发丙烯酸甲酯(MA)的接枝共聚合反应,获得了较高的接枝效率(可达90%以上)。探讨了引发剂浓度、单体浓度、反应温度对接枝参数的影响,结果表明:当c〔Ni(Ⅳ)〕=8×10-4mol/L,c(MA)=1 5mol/L,θ=35℃时,接枝效率和接枝百分比可达到最高值。用红外光谱、X射线衍射、扫描电镜对接枝共聚物进行了表征,提出了建立在镍(Ⅳ)还原为镍(Ⅱ)的过程为两步单电子转移的基础之上的引发机理。将所得接枝共聚物用作尼龙/聚甲基丙烯酸甲酯体系的增容剂,通过扫描电镜分析表明:该共混体系的相容性得到一定程度的改善。     

Natural rubber‐g‐methyl methacrylate/poly(methyl methacrylate) blends

The grafting of the methyl methacrylate (MMA) monomer onto natural rubber using potassium persulfate as an initiator was carried out by emulsion polymerization. The rubber macroradicals reacted with MMA to form graft copolymers. The morphology of grafted natural rubber (GNR) was determined by transmission electron microscopy and it was confirmed that the graft copolymerization was a surface‐controlled process. The effects of the initiator concentration, reaction temperature, monomer concentration, and reaction time on the monomer conversion and grafting efficiency were investigated. The grafting efficiency of the GNR was determined by a solvent‐extraction technique. The natural rubber‐g‐methyl methacrylate/poly(methyl methacrylate) (NR‐g‐MMA/PMMA) blends were prepared by a melt‐mixing system. The mechanical properties and the fracture behavior of GNR/PMMA blends were evaluated as a function of the graft copolymer composition and the blend ratio. The tensile strength, tear strength, and hardness increased with an increase in PMMA content. The tensile fracture surface examined by scanning electron microscopy disclosed that the graft copolymer acted as an interfacial agent and gave a good adhesion between the two phases of the compatibilized blend. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 428–439, 2001     

Grafting of poly (methyl acrylate) onto sulfite pulp fibers and its effect on water absorbance

To prepare super water absorbent hydrogels of wood cellulose fibers, poly (methyl acrylate) (PMA) was copolymerized onto softwood sulfite pulp fibers using free radical initiator followed by alkaline hydrolysis. Ceric ammonium nitrate (CAN) was used as the free radical initiator. Effects of various parameters such as fiber concentration, monomer/pulp (M/pulp) ratio, CAN concentration, and reaction time on the grafting yield and on other grafting parameters were investigated. The graft conversion was the same from low to medium fiber concentration. The amount of initiator required was found to be independent of fiber concentration to achieve maximum grafting yield. Different fiber fractions (classified based on their length) have no effect on the grafting yield. The evidence of graft copolymerization was determined by using ATR‐IR spectroscopy. The X‐ray diffraction (XRD) analysis shows that grafting takes place both in amorphous and crystalline regions of cellulose fibers and the decrease in crystallinity of the grafted fibers with an increase in grafting yield was confirmed. The surface morphology of the PMA‐g‐cellulose was characterized by scanning electron microscopy (SEM). The water retention value of the hydrolyzed grafted pulp was determined based on a centrifugation technique. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Graft copolymerization of methyl acrylate onto silk sericin initiated by tert‐butyl hydroperoxide

A novel redox system, tert‐butyl hydroperoxide (TBHP)–silk sericin (SS), was used to initiate the graft copolymerization of methyl acrylate (MA) onto silk sericin in an aqueous medium. The graft copolymer, consisting of nanoparticles with a fine core–shell structure, was characterized using Fourier transfer infrared spectroscopy. The effects of the concentrations of MA and TBHP, reaction temperature and time on the grafting parameters of the copolymerization were studied in detail. In terms of grafting percentage and grafting efficiency, the optimum reaction conditions were obtained as follows: [MA] = 0.465 mol L^?1, [TBHP] = 3.884 × 10^?4 mol L^?1, T = 80 °C, t = 150 min. Transmission electron microscopy images of the particles showed a core–shell morphology, where poly(methyl acrylate) cores were covered with SS shells. A possible initiation mechanism is proposed. Copyright © 2006 Society of Chemical Industry     

Graft Copolymerization of Acrylamide onto Oil Palm Empty Fruit Bunch (OPEFB) Fiber

Grafting of acrylamide (AAm) onto oil palm empty fruits bunch fiber using hydrogen peroxide as initiator and methyl acrylate as comonomer was investigated. The amount of comonomer needed to make grafting of acrylamide possible was determined. The percentage of poly(acrylamide) and the comonomer in the final graft copolymer was estimated by elemental analysis. Results obtained indicated that methyl acrylate facilitated the incorporation of acrylamide monomer onto OPEFB. The reactivity ratios for both monomers were determined by using Fineman–Ross plot. The effects of reaction temperature and period as well as amount of the initiator, solvent, monomer and comonomer on the percentage of grafting at fixed amount of comonomer (11 mmol) were studied. Maximum percentage of grafting was achieved when the amount of initiator and solvent 3.98×10⁻³ mol and 50 mL respectively. The optimum reaction temperature was 50 ^○C and the reaction period was 90 min. Highest percentage of grafting was 232% when 25.6 mmol of acrylamide was used under these optimum conditions. The presence of functional group in the grafted polymer is characterized by infrared spectroscopy and the surface morphology is observed by scanning electron microscopy. Thermoanalytic investigation on OPEFB and OPEFB-g-PAAM were carried out to evaluate the thermal stability and respective activation energy of the materials.