Structure and electrical properties of (1 − x)Bi0.5Na0.5TiO3-xBi0.5K0.5TiO3 ceramics near morphotropic phase boundary

The binary lead-free piezoelectric ceramics with the composition of (1 − x)Bi_0.5Na_0.5TiO₃-xBi_0.5K_0.5TiO₃ were synthesized by conventional mixed-oxide method. The phase structure transformed from rhombohedral to tetragonal phase in the range of 0.16 ≤ x ≤ 0.20. The grain sizes varied with increasing the Bi_0.5K_0.5TiO₃ content. Electrical properties of ceramics are significantly influenced by the Bi_0.5K_0.5TiO₃ content. Two phase transitions at T_t (the temperature at which the phase transition from rhombohedral to tetragonal occurs) and T_c (the Curie temperature) were observed in all the ceramics. Adding Bi_0.5K_0.5TiO₃ content caused the variations of T_t and T_c. A diffuse character was proved by the linear fitting of the modified Curie-Weiss law. Besides, the ceramics with homogeneous microstructure and excellent electrical properties were obtained at x = 0.18 and sintered at 1170 °C. The piezoelectric constant d₃₃, the electromechanical coupling factor K_p and the dielectric constant ?_r reached 144 pC/N, 0.29 and 893, respectively. The dissipation factor tan δ was 0.037.     

The synthesis of lead-free ferroelectric Bi0.5Na0.5TiO3-Bi0.5K0.5TiO3 thin films by sol-gel method

(1 − x)Bi_0.5Na_0.5TiO₃-xBi_0.5K_0.5TiO₃ [BNT-BKT-100x] thin films have been successfully deposited on Pt/Ti/SiO₂/Si substrates by a sol-gel process together with rapid thermal annealing. A morphotropic phase boundary (MPB) between Bi_0.5Na_0.5TiO₃ and Bi_0.5K_0.5TiO₃ was determined around x ∼ 0.15. Near the MPB, the film exhibits the largest grain size, the highest ε value (360) and the largest P_r value (13.8 μC/cm²). The BNT-BKT thin film system is expected to be a new and promising candidate for lead-free piezoelectric applications.     

Morphotropic phase boundary and piezoelectric properties of (Bi1/2Na1/2)1 − x(Bi1/2K1/2)xTiO3-0.03(Na0.5K0.5)NbO3 ferroelectric ceramics

Lead-free piezoelectric ceramics, (Bi_1/2Na_1/2)_1 − x(Bi_1/2K_1/2)_xTiO₃-0.03(Na_0.5K_0.5)NbO₃ (x = 0.10-0.40) were synthesized by conventional solid-state sintering. A morphotropic phase boundary (MPB) between rhombohedral and tetragonal phases was confirmed. Two dielectric anomalies can be observed, showing diffused phase transition behavior. There is no shift of the dielectric maximum temperature with frequency due to the contribution of space charge at high temperatures, similar to pure (Bi_1/2Na_1/2)TiO₃. The materials near MPB show a strong compositional dependence with the optimal properties of a d₃₃ of 167 pC/N, a k_p of 35.5%, a P_r of 27.6 μC/cm² and a E_c of 27.9 kV/cm, suitable for future application.     

Influence of sintering temperature on piezoelectric properties of (K0.5Na0.5)NbO3-LiNbO3 lead-free piezoelectric ceramics

Lead-free piezoelectric ceramics (1 − x)(K_0.5Na_0.5)NbO₃-xLiNbO₃ have been synthesized by traditional ceramics process without cold-isostatic pressing. The effect of the content of LiNbO₃ and the sintering temperature on the phase structure, the microstructure and piezoelectric properties of (1 − x)(K_0.5Na_0.5)NbO₃-xLiNbO₃ ceramics were investigated. The result shows that the phase structure transforms from the orthorhombic phase to tetragonal phase with the increase of the content of LiNbO₃, and the orthorhombic and tetragonal phase co-exist in (K_0.5Na_0.5)NbO₃-LiNbO₃ ceramics when the content of LiNbO₃ is about 0.06 mol. The sintering temperature of (1 − x)(K_0.5Na_0.5)NbO₃-xLiNbO₃ decreases with the increase of the content of LiNbO₃. The optimum composition for (1 − x)(K_0.5Na_0.5)NbO₃-xLiNbO₃ ceramics is 0.94(K_0.5Na_0.5)NbO₃-0.06LiNbO₃. The optimum sintering temperature of 0.94(K_0.5Na_0.5)NbO₃-0.06LiNbO₃ ceramics is 1080 °C. Piezoelectric properties of 0.94 (K_0.5Na_0.5)NbO₃-0.06LiNbO₃ ceramics under the optimum sintering temperature are piezoelectric constant d₃₃ of 215 pC/N, planar electromechanical coupling factor k_p of 0.41, thickness electromechanical coupling factor k_t of 0.48, the mechanical quality factor Q_m of 80, the dielectric constant of 530 and the Curie temperature T_c = 450 °C, respectively. The results indicate that 0.94(K_0.5Na_0.5)NbO₃-0.06LiNbO₃ piezoelectric ceramics is a promising candidate for lead-free piezoelectric ceramics.     

Fabrication of lead-free (Na0.82K0.18)0.5Bi0.5TiO3 piezoelectric nanofiber by electrospinning

(Na_0.82K_0.18)_0.5Bi_0.5TiO₃ nanofibers were synthesized by sol-gel process and electrospinning. Scanning electron microscopy was used to verify that the diameters and lengths are in the range of 150-600 nm and several hundreds of micrometer. Perovskite structure and grain size (20-70 nm) were verified by X-ray diffraction and transmission electron microscopy. The high effective piezoelectric coefficient d₃₃ (96 pm/V) was measured by scanning force microscopy. It may be attributed to easily tilting the polar vector of domain for an electric field and the increase in the number of possible spontaneous polarization direction near the rhombohedral-tetragonal morphotropic phase boundary. The research shows that there are potentional applications for (Na_0.82K_0.18)_0.5Bi_0.5TiO₃ nanofiber in nanoscale lead-free piezoelectric devices.     

Dielectric and piezoelectric properties of Y2O3 doped (Bi0.5Na0.5)0.94Ba0.06TiO3 lead-free piezoelectric ceramics

Y₂O₃ doped lead-free piezoelectric ceramics (Bi_0.5Na_0.5)_0.94Ba_0.06TiO₃ (0-0.7 wt%) were synthesized by the conventional solid state reaction method, and the effect of Y₂O₃ addition on the structure and electrical properties was investigated. X-ray diffraction shows that Y₂O₃ diffuses into the lattice of (Bi_0.5Na_0.5)_0.94Ba_0.06TiO₃ to form a solid solution with a pure perovskite structure. The temperature dependence of dielectric constant of Y₂O₃ doped samples under various frequencies indicates obvious relaxor characteristics different from typical relaxor ferroelectric and the mechanism of the relaxor behavior was discussed. The optimum piezoelectric properties of piezoelectric constant d₃₃ = 137 pC/N and the electromechanical coupling factor k_p = 0.30 are obtained at 0.5% and 0.1% Y₂O₃ addition, respectively.     

Dielectric, ferroelectric and piezoelectric properties of Bi0.5Na0.5TiO3-(Ba0.7Ca0.3)TiO3 ceramics at morphotropic phase boundary composition

(1 − x)Bi_0.5Na_0.5TiO₃-x(Ba_0.7Ca_0.3)TiO₃ (BNT-xBCT, 0 ≤ x ≤ 0.15) solid solutions have been synthesized by a conventional solid state sintering method for obtaining a morphotropic phase boundary (MPB) with good piezoelectric properties. X-ray diffraction patterns reveal that a MPB of rhombohedral and tetragonal phases is formed at compositions 0.09 ≤ x ≤ 0.12. Addition of BCT into BNT greatly lowered coercive field E_c without degrading remanent polarization P_r. The specimen with x = 0.09 has the good piezoelectric properties: d₃₃ = 125 pC/N and k_p = 0.33. A modified Curie-Weiss law was used to fit the dielectric constant of BNT-xBCT ceramics, and a frequency dispersion was observed during the phase transitions from antiferroelectric to paraelectric in specimens with x exceeding 0.06.     

Electrical and luminescence properties of Er-doped Bi0.5Na0.5TiO3 ceramics

The influences of Er content on the dielectric and photoluminescence performances of Bi_0.5Na_0.5TiO₃-xEr (x = 0, 0.005, 0.01, 0.015, 0.02, 0.03) ceramics have been investigated. The results show that Bi_0.5Na_0.5TiO₃-xEr ceramics with x = 0.01 Er have maximum values of photoluminescence and piezoelectric properties. A bright green emission at 550 nm and enhanced piezoelectric response are achieved in the ceramic Bi_0.5Na_0.5TiO₃-0.01Er at room temperature. Furthermore, the photoluminescence performance of the ceramics is significantly enhanced by electric poling.     

Effect of Pb(Fe1/2Nb1/2)O3 modification on dielectric and piezoelectric properties of Pb(Mg1/3Nb2/3)O3-PbZr0.52Ti0.48O3 ceramics

10 mol% Pb(Fe_1/2Nb_1/2)O₃ (PFN) modified Pb(Mg_1/3Nb_2/3)O₃-PbZr_0.52Ti_0.48O₃ (PMN-PZT) relaxor ferroelectric ceramics with compositions of (0.9 − x)PMN-0.1PFN-xPZT (x = 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8 and 0.9) were prepared. X-ray diffraction investigations indicated that as-prepared ceramics were of pure perovskite phase and the sample with composition of x = 0.8 was close to morphotropic phase boundary (MPB) between rhombohedral and tetragonal phase. Dielectric properties of the as-prepared ceramics were measured, and the Curie temperature (T_c) increased sharply with increasing PZT content and could be higher than 300 °C around morphotropic phase boundary (MPB) area. At 1 kHz, the sample with composition of x = 0.1 had the largest room temperature dielectric constant ?_r = 3519 and maximum dielectric constant ?_m = 20,475 at T_m, while the sample with composition of x = 0.3 possessed the maximum dielectric relaxor factor of γ = 1.94. The largest d₃₃ = 318 pC/N could be obtained from as-prepared ceramics at x = 0.9. The maximum remnant polarization (P_r = 28.3 μC/cm²) was obtained from as-prepared ceramics at x = 0.4.     

Influences of poling condition and sintering temperature on piezoelectric properties of (Na0.5Bi0.5)1 − xBaxTiO3 ceramics

The structure, ferroelectric characteristics and piezoelectric properties of (Na_0.5Bi_0.5)_1 − xBa_xTiO₃ (x = 0.04, 0.06, 0.10) ceramics prepared by conventional solid state method were investigated. The influences of poling condition and sintering temperature on the piezoelectric properties of the ceramics were examined. The piezoelectric properties of the ceramics highly depend on poling field and temperature, while no remarkable effect of poling time on the piezoelectric properties was found in the range of 5-25 min. Compared with (Na_0.5Bi_0.5)_0.96Ba_0.04TiO₃ and (Na_0.5Bi_0.5)_0.90Ba_0.10TiO₃, the piezoelectric properties of (Na_0.5Bi_0.5)_0.94Ba_0.06TiO₃ are more sensitive to poling temperature due to the relatively low depolarization temperature. Moderate increase of sintering temperature improved the poling process and piezoelectric properties due to the development of microstructural densification and crystal structure. With respect to sintering behavior and piezoelectric properties, a sintering temperature range of 1130-1160 °C was ascertained for (Na_0.5Bi_0.5)_0.90Ba_0.10TiO₃.     

Ferroelectric properties of lithia-doped (Bi0.95Na0.75K0.20)0.5Ba0.05TiO3 ceramics

Lead-free piezoelectric (Bi_0.95Na_0.75K_0.20−xLi_x)_0.5Ba_0.05TiO₃ ceramics have been prepared by conventional process for different lithium substitutions. The SEM images show that the ceramics are well sintered at 1428 K. Dielectric and ferroelectric measurements have been performed. With the increasing of lithium substitution, the Curie temperature of the (Bi_0.95Na_0.75K_0.20−xLi_x)_0.5Ba_0.05TiO₃ ceramics shifts from 570 K to 620 K, but the maximum value of the dielectric constant decreases from 6700 to 4700 correspondingly. A relatively larger remanent polarization of 36.8 μC/cm² has been found in the x = 0.05 sample. The coercive field decreases as the lithium substitution amount increases. An optimized d₃₃ = 194 × 10^− 12 C/N and a relative dielectric constant ε_r = 1510 have been obtained in (Bi_0.95Na_0.75K_0.15Li_0.05)_0.5Ba_0.05TiO₃.     

Tantalum influence on physical properties of (K0.5Na0.5)(Nb1−xTax)O3 ceramics

Lead-free (K_0.5Na_0.5)(Nb_1−xTa_x)O₃ ceramics with x = 0.00-0.30 were prepared by the solid-state reaction technique. The effects of Ta on microstructure, crystallographic structure, phase transition and piezoelectric properties have been investigated. It has been shown that the substitution of Ta decreases Curie temperature T_C and orthorhombic-tetragonal phase transition temperature T_O-T, while increasing the rhombohedral-orthorhombic phase transition temperature T_R-O. In addition, piezoelectric activity is enhanced with the increase of Ta content. The ceramics with x = 0.30 have the high value of piezoelectric coefficient d₃₃ = 205 pC/N. Moreover, k_p shows little temperature dependence between −75° C and 75 °C, and d₃₃ exhibits very good thermal stability over the range from −196 °C to 75 °C in the aging test.     

Ferroelectric and pyroelectric properties of (Na0.5Bi0.5)TiO3-BaTiO3 based trilayered thin films

Trilayered Bi_3.25La_0.75Ti₃O₁₂ (25 nm)/(Na_0.5Bi_0.5)_0.94Ba_0.06TiO₃ (300 nm)/Bi_3.25La_0.75Ti₃O₁₂ (25 nm) and Pb(Zr_0.4Ti_0.6)O₃ (25 nm)/(Na_0.5Bi_0.5)_0.94Ba_0.06TiO₃ (300 nm)/Pb(Zr_0.4Ti_0.6)O₃ (25 nm) thin films without undesirable phases have been deposited on Pt/Ti/SiO₂/Si substrates. It was found that the Bi_3.25La_0.75Ti₃O₁₂ and Pb(Zr_0.4Ti_0.6)O₃ layers are very effective to inhibit the charge transport in the trilayered films. Much better insulating properties than those of (Na_0.5Bi_0.5)_0.94Ba_0.06TiO₃ films have been achieved in the trilayered films. The trilayered films show good dielectric, ferroelectric and pyroelectric properties. Remnant polarizations 2P_r of 16 µC/cm² and 34 µC/cm², pyroelectric coefficients of 4.8 × 10^− 4 C m^− 2 K^− 1 and 7.0 × 10^− 4 C m^− 2 K^− 1 have been obtained for the Bi_3.25La_0.75Ti₃O₁₂/(Na_0.5Bi_0.5)_0.94Ba_0.06TiO₃/Bi_3.25La_0.75Ti₃O₁₂ and Pb(Zr_0.4Ti_0.6)O₃/(Na_0.5Bi_0.5)_0.94Ba_0.06TiO₃/Pb(Zr_0.4Ti_0.6)O₃ thin films, respectively. The trilayered films are promising candidates for sensor and actuator applications.     

Processing, dielectric properties and impedance characteristics of Na0.5Bi0.5Cu3Ti4O12 ceramics

Na_0.5Bi_0.5Cu₃Ti₄O₁₂ (NBCTO) ceramics were prepared by conventional solid-state reaction method. The phase structure, microstructure and dielectric properties of NBCTO ceramics sintered at various temperatures with different soaking time were investigated. Pure NBCTO phase could be obtained with increasing the temperature and prolonging the soaking time. High dielectric permittivity (13,495) and low dielectric loss (0.031) could be obtained when the ceramics were sintered at 1000 °C for 7.5 h. The ceramics sintered at 1000 °C for 7.5 h also showed good temperature stability (−4.00 to −0.69%) over a large temperature range from −50 to 150 °C. Complex impedances results revealed that the grain was semiconducting and the grain boundaries was insulating. The grain resistance (R_g) was 12.10 Ω cm and the grain boundary resistance (R_gb) was 2.009 × 10⁵ Ω cm when the ceramics were sintered at 1000 °C for 7.5 h.     

Giant strain in Nb-doped Bi0.5(Na0.82K0.18)0.5TiO3 lead-free electromechanical ceramics

The effect of Nb substitution on the crystal structure, ferroelectric, and electric field induced strain properties of Bi_0.5(Na₈₂K_0.18)_0.5TiO₃ (BNKT) ceramics has been investigated. The coexistence of rhombohedral and tetragonal phases was found in undoped BNKT ceramics, however, Nb doping induced a phase transition to a pseudocubic phase with high electrostriction coefficients. When 3 mol% Nb was substituted on Ti ions, the electric field induced strain was markedly enhanced up to S_max/E_max = 641 pm/V, which is higher than those previously reported on non-textured lead-free electromechanical ceramics.     

Sol-gel synthesis of lead-free (K0.5Bi0.5)0.4Ba0.6TiO3 nanorods

A kind of lead-free ferroelectric nanorods, (K_0.5Bi_0.5)_0.4Ba_0.6TiO₃, has been prepared by the sol-gel process. The phase formation, structure and morphological analyses of (K_0.5Bi_0.5)_0.4Ba_0.6TiO₃ were investigated by XRD, FTIR, Raman and TEM. The results revealed that single-crystalline (K_0.5Bi_0.5)_0.4Ba_0.6TiO₃ nanorods with width around 80 to 120 nm, and length around 200-300 nm were obtained by calcining dried gels at 800 °C for 2 h. Raman analysis of (K_0.5Bi_0.5)_0.4Ba_0.6TiO₃ nanorods indicated that A₁(TO₂) and E(TO) mode incorporated into one broad peak at around 285 cm^− 1, which can be attributed to the cation disorder (Bi, K, Ba) on the 12-fold coordinated A site of ABO₃ structure.     

Synthesis and characterization of (Na0.85K0.15)0.5Bi0.5TiO3 ceramics by different methods

The (Na_0.85K_0.15)_0.5Bi_0.5TiO₃ (BNKT) powders were synthesized by solid-state method, sol-gel method and stearic acid method. Microstructure, piezoelectric and dielectric properties of the ceramics were investigated. Attempts had been made to understand the reaction processes by using thermo gravimetric (TG) and differential scanning calorimetry (DSC). The BNKT powders have a perovskite structure with average crystallite sizes of 168 nm, 85 nm and 79 nm, corresponding to the solid-state method, the sol-gel method and the stearic acid method, respectively. The ceramics derived from the powder synthesized by sol-gel method presents the most homogeneous microstructure and largest grain size (5-7 μm). The effects of average crystallite size on microstructures and electric properties of the BNKT ceramics were investigated. Both the piezoelectric properties and dielectric properties were enhanced with the increase of grain size.     

Dielectric and piezoelectric properties of alkaline-earth titanate doped (K0.5Na0.5)NbO3 ceramics

(K_0.5Na_0.5)NbO₃ (KNN) and 0.995(K_0.5Na_0.5)NbO₃-0.005AETiO₃ (AE = Mg, Ca, Sr, Ba) were successfully prepared by conventional ceramic processing and without the cold-isostatic-pressing (CIP) process. The effects of low AETiO₃ (AET) concentration on crystal structure, density, dielectric and piezoelectric properties of the KNN based ceramics were evaluated. The results show that adding MgTiO₃(MT) and BaTiO₃(BT) to KNN can lead to the appearance of a trace amount of second phase(s), reduced density and deteriorated electrical properties. Adding CaTiO₃(CT) and SrTiO₃(ST) to KNN can promote densification and optimize electrical properties. Two phase transitions at T_t-o ( the temperature at which the phase transition from orthorhombic to tetragonal occurs) and T_c (the Curie temperature) were observed in KNN and all KNN-AET ceramics, by using differential scanning calorimetry (DSC) analysis and dielectric characterization. Adding AET to KNN caused the variations of T_t-o and T_c.     

Tunable and microwave dielectric properties of Ba0.5Sr0.5TiO3-BaWO4 composite ceramics doped with Co2O3

Co₂O₃ doped BaWO₄-Ba_0.5Sr_0.5TiO₃ composite ceramics, prepared by solid-state route, were characterized systematically, in terms of their phase compositions, microstructure and microwave dielectric properties. Doping of Co₂O₃ promoted grain growth, reduced Curie temperature and broadened phase-transition temperature range of BaWO₄-Ba_0.5Sr_0.5TiO₃, which were attributed mainly to the substitution of Co³⁺ for Ti⁴⁺ at B site in the perovskite lattice. Dielectric diffusion behaviors of the composite ceramics were discussed. The composite ceramics all had dielectric tunability of higher than 10% at 30 kV/cm and 10 kHz, with promising microwave dielectric properties. Specifically, the sample doped with 0.2 wt.% Co₂O₃ exhibited a tunability of 20%, permittivity of 225 and Q of 292 (at 1.986 GHz), making it a suitable candidate for applications in electrically tunable microwave devices.     

Microwave dielectric properties of La1−xBix(Mg0.5Sn0.5)O3 ceramics

The La_1−xBi_x(Mg_0.5Sn_0.5)O₃ ceramics were prepared by the conventional solid-state method with various sintering temperatures. The X-ray diffraction patterns of the La_0.97Bi_0.03(Mg_0.5Sn_0.5)O₃ ceramics revealed no significant variation of phase with sintering temperatures. An apparent density of 6.50 g cm⁻³, a dielectric constant (?_r) of 20.2, a quality factor (Q × f) of 58,100 GHz and a temperature coefficient of resonant frequency (τ_f) of −84.2 ppm °C⁻¹ were obtained for La_0.97Bi_0.03(Mg_0.5Sn_0.5)O₃ ceramics that were sintered at 1550 °C for 4 h.