Phase transitions and ionic mobility in hydrogen zirconium phosphates with the NASICON structure, H1±XZr2−XMX(PO4)3·H2O, M = Nb, Y

Phase transitions and the mobility of proton-containing groups in hydrogen zirconium phosphate HZr₂(PO₄)₃·nH₂O with the NASICON structure were studied by X-ray powder diffraction, ¹H, ³¹P NMR, IR spectroscopy and TG analysis. Heating HZr₂(PO₄)₃·H₂O above 420 K results in dehydration and in a rhombohedral-triclinic phase transition. Continued heating to about 490 K results in the thermal activation of cation disordering and phase transition of HZr₂(PO₄)₃ from triclinic to rhombohedral phase. Parameter “a” of HZr₂(PO₄)₃ lattice decreases during the heating. It is shown that oxonium ions in HZr₂(PO₄)₃·H₂O are characterized by high rotation and translation mobility. Rotation mobility of oxonium ions can be increased by the substitution of zirconium by yttrium or niobium.     

Study on the electrical conductivity and oxygen diffusion of oxide-ion conductors La2Mo2−xTxO9−δ (T = Al, Fe, Mn, Nb, V)

In this paper, the influence of cationic substitutions at Mo site with Al³⁺, Fe³⁺, Mn⁴⁺, Nb⁵⁺ and V⁵⁺ ions on the structure, oxygen ion diffusion and electrical properties in La₂Mo₂O₉ oxide-ion conductors have been investigated by X-ray diffraction method, dielectric relaxation technique and direct current conductivity measurement. Except for V⁵⁺ substitution all of these substitutions up to 5% cannot suppress the phase transition in La₂Mo₂O₉. In the dielectric measurement, one prominent relaxation peak is observed in temperature spectrum as well as in frequency spectrum, which is associated with the short-distance diffusion of oxygen vacancies. The activation energy for oxygen ion diffusion is deduced as in the range of 1-1.1 eV for Al, Fe, Mn and Nb doped samples and 1.4-1.5 eV for V doped samples. All substituted samples have a higher conductivity than the un-doped compound. In the Al, Fe, Mn and Nb substituted materials the phase transition is not suppressed; however, K substitution at the La site can completely suppress the transition and maintains high conductivity at low temperature.     

Inorganic phosphate crystal Na15−n[Al(PO4)2F2]3−n[Ti(PO4)2F2]n (0 ≤ n < 1): A novel cation exchanger with high exchange selectivity for Li and Pb ions

A series of inorganic phosphate crystals have been hydrothermally synthesized, which have high chemical stability and can keep their crystal structure after acid/base treatments. Its cation-exchange properties have been investigated and the results show that it is an excellent ion exchanger with high exchange capacities for H⁺, Li⁺ and Pb²⁺ ions (12.74, 6.98 and 3.92 mequiv./g, respectively). Selective extractions of Li⁺ and Pb²⁺ from the synthetic mixtures containing (Li⁺, Sr⁺, K⁺, Mg²⁺, Ca²⁺ and Ba²⁺) and (Pb²⁺, Ca²⁺, Ba²⁺, Co²⁺, Ni²⁺, Zn²⁺ and Mg²⁺) have been observed. The reasons of the high exchange selection of NATP for Li⁺ and Pb²⁺ ions have been discussed.     

Synthesis and conductivity of solid high-proton conductor H5GeW10MoVO40·21H2O

A new solid high-proton conductor decatungstomolybdovanadogermanic heteropoly acid (HPA) H₅GeW₁₀MoVO₄₀·21H₂O has been synthesized for the first time by stepwise acidification and stepwise addition of solutions of the component elements. The product was characterized by chemical analysis, potentiometric titration, IR, UV, XRD and TG-DTA. The IR, UV and XRD indicate that H₅GeW₁₀MoVO₄₀·21H₂O possesses the Keggin structure. The TG-DTA curve shows the sequence of water loss in the acid, the amount of the loss, as well as the thermostability. The results of AC impedance measurement show that its proton conductivity is 3.58 × 10⁻⁴ S cm⁻¹ at 18 °C and the activation energy for proton conduction is 31.82 kJ/mol.     

Effect of B-site doping on Sm0.5Sr0.5MxCo1−xO3−δ properties for IT-SOFC cathode material (M = Fe, Mn)

The crystal structure, thermal expansion rate, electrical conductivity and electrochemical performance of Sm_0.5Sr_0.5M_xCo_1−xO_3−δ (M = Fe, Mn) have been investigated. Two crystal structures have been observed in the specimens of Sm_0.5Sr_0.5Fe_xCo_1−xO_3−δ (SSFC) at room temperature, the perovskite structure of SSFC has an orthorhombic symmetry for 0 ≤ x ≤ 0.4 and a cubic symmetry for 0.5 ≤ x ≤ 0.9. The specimens of Sm_0.5Sr_0.5Mn_xCo_1−xO_3−δ (SSMC) crystallize in an orthorhombic structure. The adjustment of thermal expansion rate to electrolyte, which is one of the main problems of SSC, can be achieved to lower TEC values with more Fe and Mn substitution. Especially, Sm_0.5Sr_0.5Mn_0.8Co_0.2O_3−δ exhibits good thermal compatibility with La_0.8Sr_0.2Ga_0.8Mg_0.2O₃. High electrical conductivities are obtained for all the specimens and they demonstrate above 100 S/cm at 800 °C in SSFC system. The polarization resistance increases with increasing Mn content, Nevertheless, the polarization resistance of SSFC increases with increasing Fe content, but when the amount of Fe reaches to 0.4, the maximum is obtained while the resistance will decrease when the amount of Fe reaches above 0.4. Sm_0.5Sr_0.5Fe_0.8Co_0.2O_3−δ electrode exhibits high catalytic activity for oxygen reduction operating at temperature from 700 to 800 °C.     

Negative thermal expansion in Th2O(PO4)2

High temperature X ray diffraction performed on recently discovered orthorhombic Th₂O(PO₄)₂ shows a continuous linear thermal contraction (−1.6 × 10⁻⁶ °C⁻¹) in 20–600 °C range and a near-zero expansion at higher temperatures resulting from a dual structural deformation involving oxygen oscillations and inter-cations repulsions. Although similar mechanisms were observed in isotypic Zr₂O(PO₄)₂ (+1.5 × 10⁻⁶ °C⁻¹) and U₂O(PO₄)₂ (−1.4 × 10⁻⁶ °C⁻¹), those observed in Th₂O(PO₄)₂ are particularly intense because of the high ionic radius of tetravalent thorium.     

Synthesis of xLi2MnO3·(1 − x)LiMO2 (M = Cr, Mn, Co, Ni) nanocomposites and their electrochemical properties

A series of 0.4Li₂MnO₃·0.6LiMO₂ (M = Ni_1/3Co_1/3Mn_1/3 and Ni_1/3Cr_1/3Mn_1/3) cathode materials are prepared by a co-precipitation method with subsequent quenching. Crystal structures of samples are investigated by X-ray diffraction and electron diffraction, which show a co-existence of rhombohedral and monoclinic structures indicating nanocomposite characteristics of the sample of 0.4Li₂MnO₃·0.6Li Ni_1/3Cr_1/3Mn_1/3O₂. The average particle size distributions of the powders are analyzed to be an order 400 and 100 nm. The 0.4Li₂MnO₃·0.6LiMO₂ (M = Ni_1/3Co_1/3Mn_1/3 and Ni_1/3Cr_1/3Mn_1/3) electrodes, which consist of a well balanced partial phases of rhombohedral and monoclinic can deliver a high reversible capacity of 220-230 mAh/g during an extended cycling.     

Microemulsion-assisted solvothermal synthesis of Nd2(CO3)3·8H2O microstructures

Microstructures of Nd₂(CO₃)₃·8H₂O with various morphological structures and sizes were successfully synthesized using the microemulsion-assisted solvothermal method. The obtained products were characterized by X-ray diffraction (XRD), differential scanning calorimetry and thermal gravimetric analysis (DSC-TGA), scanning electron microscope (SEM), transmission electron microscope (TEM) and electron diffraction (ED). The results showed that pyramid-like and spherical Nd₂(CO₃)₃·8H₂O microstructures were synthesized depending on the reaction time and reaction temperature. Moreover, the reaction time and temperature also played important roles in controlling the morphologies and sizes of the resulting Nd₂(CO₃)₃·8H₂O microstructures.     

Transport properties and Mössbauer spectra of Fe-substituted La10−x(Si,Al)6O26 apatites

Increasing iron content in apatite-type La_9.83Si_4.5Al_1.5−yFe_yO_26+δ (y=0.5-1.5) leads to increasing unit cell volume, fraction of Fe⁴⁺, partial oxygen ionic and p-type electronic conductivities, and ceramics sinterability. The oxygen ion transference numbers, determined by Faradaic efficiency (FE) measurements at 973-1223 K in air, are in the range 0.986-0.994. Data on total conductivity and Seebeck coefficient as functions of the oxygen partial pressure, varying in the range 10⁻² Pa to 70 kPa, confirm that under oxidizing conditions the ionic conduction in Fe-substituted La_9.83(Si,Al)₆O_26+δ apatites is dominant. Due to stabilization of Fe³⁺, substantially worse transport properties are observed for A-site stoichiometric La₁₀Si₄Fe₂O₂₆, having activation energy for ionic conductivity of 107 kJ/mol and electron transference numbers close to 0.03. The correlation between partial ionic and electron-hole conductivities suggests a significant role of Fe⁴⁺ formation compensated by extra oxygen incorporation into the vacant sites, which are formed due to Frenkel-type disorder induced by La vacancies. The average thermal expansion coefficients of Fe-doped La_10−x(Si,Al)₆O_26+δ ceramics, calculated from dilatometric data in air, are 8.9×10⁻⁶ to 9.9×10⁻⁶ K⁻¹ at 300-1250 K.     

[NH3(CH2)2NH3][Co(SO4)2(H2O)4]: Chemical preparation, crystal structure, thermal decomposition and magnetic properties

Cobalt ethylenediammonium bis(sulfate) tetrahydrate, [NH₃(CH₂)₂NH₃][Co(SO₄)₂(H₂O)₄], has been synthesised by slow evaporation at room temperature. It crystallises in the triclinic system, space group , with the unit cell parameters: a = 6.8033(2), b = 7.0705(2), c = 7.2192(3) Å, α = 74.909(2)°, β = 72.291(2)°, γ = 79.167(2)°, Z = 1 and V = 317.16(2) Å³. The Co(II) atom is octahedrally coordinated by four water molecules and two sulfate tetrahedra leading to trimeric units [Co(SO₄)₂(H₂O)₄]. These units are linked to each other and to the ethylenediammonium cations through OW-H…O and N-H…O hydrogen bonds, respectively. The zero-dimensional structure is described as an alternation between cationic and anionic layers along the crystallographic b-axis. The dehydration of the precursor proceeds through three stages leading to crystalline intermediary hydrate phases and an anhydrous compound. The magnetic measurements show that the title compound is predominantly paramagnetic with weak antiferromagnetic interactions.     

Investigation of fast-ionic transport in the ternary system (Cu1−xAgxI)-(Ag2O)-(V2O5), (0.05≤x≤0.25)

The occurrence of fast-ionic conduction in the ternary system 40(Cu_1−xAg_xI)-40(Ag₂O)-20(V₂O₅), (0.05≤x≤0.25) has been described. The formation of composite solid electrolyte materials comprising glassy and crystalline phases has been identified by means of X-ray diffraction analysis. Fourier transform infrared spectroscopic studies have confirmed the presence of VO₄³⁻ and V₂O₇⁴⁻ groups in these new materials. Detailed thermal characterization of these materials carried out by differential scanning calorimetry has indicated the transition temperature of one of the reaction products viz., AgI. From the conductivity measurements carried out using the complex impedance analysis, the values of room temperature electrical conductivity (σ_RT) and activation energy for ionic migration in these materials are found to be of the order of 10⁻² to 10⁻⁴ S cm⁻¹ and 0.22-0.35 eV, respectively. The ionic transport number (t_i) measurements made using Wagner’s polarization method and evaluation of silver ionic transport number (t_Ag⁺) by galvanic cell method have been used to estimate the extent of contribution of ionic conductivity especially due to silver ionic transport to the total conductivity observed in these materials.     

Synthesis and characterization of Sr(10−x)Cdx(PO4)6Y2 (Y = OH and F): A comparison of apatites containing two divalent cations

Cadmium substituted strontium hydroxy- and fluoro-apatites, Sr_(10−x)Cd_x(PO₄)₆Y₂ (Y = OH and F), have been prepared as single phases in the 0 ≤ x ≤ 4 interval for the former and 0 ≤ x ≤ 6 for the latter compound, respectively. The refinements of the X-ray full powder patterns allowed the structure determination of nine samples, and showed a preference of cadmium atoms for the M(1) site in fluoroapatite samples. IR investigation gave information about the nature of the metal oxygen interactions. The obtained results are used for a comparative discussion about the factors which drive the mutual substitution of Ca, Sr, Cd and Pb in apatites. The important role of electronegativity and polarisability, as well as of ionic radii, is evidenced.     

Reaction of π-Ti2O(PO4)2·2H2O with molten alkali nitrates: Synthesis of the fibrous materials π-M0.5H0.5TiOPO4 (M = Na, K)

Powder X-ray diffraction data for π-Ti₂O(PO₄)₂·2H₂O (π-TiP) is indexed in a monoclinic cell [a=5.067(4), b=10.898(3), c=14.533(8) Å, β=96.0(1)°]. Structural correlations with other titanium phosphates are discussed. The reaction of π-TiP with molten MNO₃ (M=Na, K) originates new metal phases with a KTP-type formula, π-M_0.5H_0.5TiOPO₄. These compounds maintain the fibrous morphology of their precursor. The reactions are monitored by thermogravimetric analysis. Thermal decomposition of the novel compounds is described.     

Chemical preparation, crystal structure and characterization of the new sodium ytterbium cyclotriphosphate Na3Yb(P3O9)2·9H2O

Chemical preparation and crystal structure are reported for a new lanthanide cyclotriphosphate Na₃Yb(P₃O₉)₂·9H₂O. This salt crystallizes in the trigonal system, space group with the following parameters: a = 30.933(2), c = 12.8282(5) Å. The crystal structure was refined to R₁ = 0.0432 using 1782 reflections with I > 2 σ(I). In the Na₃Yb(P₃O₉)₂·9H₂O structure, the phosphoric ring anions, located around the axis are interconnected by YbO₈ dodecahedra and NaO₆ and NaO₇ polyhedra to build, around the threefold axis, large channels parallel to the c axis. All the nine water molecules in the present arrangement participate in the coordination spheres of the associated cations. The thermogravimetric analysis shows that the removal of these water molecules occurs in three stages between 305 and 736 K.The vibrational study by IR absorption spectroscopy of Na₃Yb(P₃O₉)₂·9H₂O is also reported.     

Structure electronic and ionic conductivity study versus Ca content in Ca10−xSrx(PO4)6F2 apatites

Substitution effect on the crystallographic structure in Ca_10−xSr_x(PO₄)₆F₂ solid solution are studied by X-ray diffraction patterns and Rietveld refinements. Full potential electronic structure calculations based on LCAO (linear combination atomic orbital) are also performed using the obtained crystallographic parameters. DOS modification and the charge transfer are estimated versus the calcium content. According to the complex impedance method, ionic conductivity changes are explained.     

Structural and electrical properties of La2−xBaxMo2O9−x/2 (x = 0-0.18)

La_2−xBa_xMo₂O_9−x/2 (x ≤ 0.18) have been prepared by solid state reaction method. The lattice parameter of La_2−xBa_xMo₂O_9−x/2 (x ≤ 0.18) determined by XRD data refinement shows a linear dependence on the dopant Ba content x. For the specimen with a La/Ba molar ratio of 0.18-0.2, additional reflection of secondary phase exists in the XRD pattern, so the value of solubility limit for Ba in La₂Mo₂O₉ is defined in range of 0.18 < x < 0.2. As the replacement degree of La³⁺ by Ba²⁺ increases, the bulk conductivity of La_2−xBa_xMo₂O_9−x/2 (x ≤ 0.18) decreases initially and then increases, a minimum value at La_1.9Ba_0.1Mo₂O_8.95 exists. Hebb-Wagner studies in argon atmosphere, which use an oxide-ion blocking electrode, show that La_2−xBa_xMo₂O_9−x/2 (x ≤ 0.18) are predominantly oxide-ion conducting in the temperature ranging from 773 to 1173 K. The average thermal expansion coefficient of La_1.84Ba_0.16Mo₂O_8.92 determined by high-temperature XRD was deduced as great as 17.5 × 10⁻⁶ K⁻¹ between 298 and 1173 K.     

Dielectric relaxation related to single-ionized oxygen vacancies in (Pb1−xLax)(Zr0.90Ti0.10)1−x/4O3 ceramics

The dielectric relaxation phenomenon has been studied in lanthanum modified lead zirconate titanate ceramics in the high temperature paraelectric phase. The high temperature dielectric response revealed an anomalous behavior, which is characterized by an increase of the real component of the dielectric permittivity with the increase of the temperature. At the same time, a similar behavior, with very high values, has been observed in the imaginary component of the dielectric permittivity, which can be associated with conduction effects related to the conductivity losses. The frequency and temperature behavior of the complex dielectric permittivity has been analyzed considering the semi-empirical complex Cole-Cole equation. The activation energy value, obtained from the Arrhenius’ dependence for the relaxation time, was found to decreases with the increase of the lanthanum concentration and has been associated with single-ionized oxygen vacancies. The short-range hopping of oxygen vacancies is discussed as the main cause of the dielectric relaxation.     

New cathode compositions based on La0.84Sr0.16Mn1−xMxO3, where M = Al, Ga for solid oxide fuel cell

In order to identify new cathode compositions for the high temperature solid oxide fuel cell, we have investigated the effect of the trivalent cations Al and Ga at the Mn site of the well-studied cathode composition La_0.84Sr_0.16MnO₃. All the compositions have been prepared by the low temperature citrate-nitrate auto-ignition process and sintered within the temperature range of 1150-1350 °C for 4 h. In order to understand the compatibility of the prepared samples as alternative cathode materials, we compared their electrical conductivity and thermal expansion coefficient with those of La_0.84Sr_0.16MnO₃ and yttria-stabilized zirconia. A 10 mol% Al doped La_0.84Sr_0.16MnO₃ composition exhibited a conductivity of around 122 S cm⁻¹ at 950 °C and a thermal expansion coefficient of 11.04 × 10⁻⁶ K with a minimum reactivity towards yttria-stabilized zirconia. Though the conductivity of the new composition is lower than that of La_0.84Sr_0.16MnO₃ (169 S cm⁻¹ at 950 °C), it is still high enough for use as a cathode material.