Enhanced electromagnetic microwave absorption of SiC nanowire-reinforced PDC-SiC ceramics catalysed by rare earth

Rare earth elements can modulate the dielectric constant of materials and significantly improve their dielectric properties. Herein, SiCnws/SiC ceramics were prepared through polymer derived ceramics (PDCs) technology with rare earth Sc particles as the catalyst. The Sc particles promote the precipitation of SiC and C from the matrix. Furthermore, the SiCnws, grown via the vapour-liquid-solid (VLS) mechanism, construct the three dimensional (3D) network structure to improve impedance matching and loss characteristics. Remarkably, the SiCnws/SiC ceramics minimum reflection coefficient (RC_min) achieved a value of ?33.2 dB at 9.4 GHz with a thickness of 2.75 mm, and the effective absorption bandwidth (EAB) was 4.2 GHz covering the whole X band. When microwaves permeated into the SiCnws/SiC ceramics, those trapped in the 3D network structure underwent a variety of microwave energy dissipation processes, including multiple reflections, scattering, and interface and dipole polarisation. Consequently, SiCnws-reinforced PDC-SiC ceramics catalysed by rare earth emerge as a promising new approach to enhance electromagnetic (EM) wave absorption performance.     

Hierarchical brain-coral-like structure (3D) vs rod-like structure (1D): Effect on electromagnetic wave loss features of SrFe12O19 and CoFe2O4

Morphological configuration plays a vital role in regulating the absorption performance of magnetic materials. Herein, a novel challenge is discussed on electromagnetic loss features of two hard and soft magnetic materials with hierarchical brain-coral like structure and rod-like structure. In this study, pure SrFe₁₂O₁₉ (Sr) as hard magnetic component and CoFe₂O₄ (Co) as soft magnetic component with two distinct morphologies were successfully synthesized by facile hydrothermal and solvothermal methods. In the first approach, electromagnetic loss features of rod and brain-coral-like particles were investigated, and in second approach -according to the obtained results-microwave absorption performance of a mixture of hard/soft magnetic components with hierarchical structure were evaluated. The minimal reflection loss (RL) for brain-coral-like particles of individual Sr and Co samples were −17.6 dB (at 18.8 GHz with 9 mm thickness) and −31.2 dB (at 8.1 GHz with 10 mm thickness), respectively, which show far better performance than rod-like structure. Remarkably, the composite of Sr and Co micro-particles with hierarchical structure exhibited strong RL value of −38 dB with 2.6 GHz effective absorption bandwidth at the thickness of 2.5 mm, with a filling ratio of 40 wt%. According to the results, it is founded that the electromagnetic loss features are crucially boosted via hierarchical configuration of magnetic materials. Increment in complex permittivity and permeability, accounting for the formation of cross-linked networks in the hierarchical structure, promoted the interfacial polarization phenomena with different relaxation times and appearance of multi resonance peaks.     

Enhanced breakdown strength and energy density of antiferroelectric Pb,La(Zr,Sn,Ti)O3 ceramic by forming core-shell structure

Antiferroelectric Pb_0.97La_0.02(Zr_0.33Sn_0.55Ti_0.12)O₃@SiO₂ (with 5% mole of SiO₂) particles were synthesized by a citric acid sol-gel method. Transmission electron microscopy(TEM) results illustrated the formation of core–shell nanostructures with controllable shell thicknesses about 3–5?nm. X-ray diffraction(XRD) patterns displayed that a stable perovskite phase was preserved and no other crystallization peaks were discovered from the shell component. Scanning electron microscopy(SEM) and Energy Dispersive Spectrometer(EDS) investigations confirmed that core-shell structures were inherited from particles to ceramics after sintering. As a result, through the coating process, the breakdown strength of the ceramic increases by 95% from 12.2?kV/mm to 23.8?kV/mm and the recoverable energy density was greatly enhanced from 1.76?J/cm³ to 2.68?J/cm³. These results demonstrate a promising reaction method to enhance breakdown strength in antiferroelectrics for energy storage capacitor applications.     

Fabrication of Ni/ZnO/C hollow microspheres decorated graphene composites towards high-efficiency electromagnetic wave absorption in the Ku-band

Developing light-weight, thin thickness and high-efficiency electromagnetic wave (EMW) absorbers is an effective strategy for dealing with the increasingly serious problem of electromagnetic radiation pollution. Herein, nickel/zinc oxide/carbon (Ni/ZnO/C) hollow microspheres decorated graphene composites were facilely prepared through the high-temperature pyrolysis of bimetallic NiZn metal-organic frameworks (MOFs) precursors. Morphological characterization results manifested that the Ni/ZnO/C microspheres with unique hollow structure were almost evenly anchored on the wrinkled surfaces of flake-like graphene. Moreover, the influences of additive amounts of graphene oxide (GO) in the MOFs precursors on the crystal structure, graphitization degree, micromorphology, magnetic properties, electromagnetic parameters and EMW absorption performance were investigated in detail. It was found that the superior EMW absorption performance could be achieved through facilely adjusting the additive amounts of GO in the precursors. As the additive amount of GO was equal to 60 mg, the obtained composite showed the comprehensive excellent EMW absorption performance. Notably, the optimal minimum reflection loss reached ?57.5 dB at 16.5 GHz in the Ku-band under an ultrathin matching thickness of merely 1.34 mm, and the broadest effective absorption bandwidth achieved 5.6 GHz (from 12.4 to 18 GHz) when the thickness was 1.5 mm. Furthermore, the underlying EMW absorption mechanisms of as-prepared composites were revealed. It was believed that our results could be valuable for the structural design and EMW absorption performance modulation for MOFs derived magnetic carbon composites.     

Controllable synthesis of porous CxNy nanofibers with enhanced electromagnetic wave absorption property

Porous C_xN_y nanofibers are controllably synthesized by a simple two-step method. The prepared samples possess uniform micropores and a chemical composition of C_0.73 N_0.27 with a surface area of 329 m² g⁻¹. The obtained C_xN_y nanofibers exhibit remarkable electromagnetic (EM) wave absorption properties when compared with conventional one-dimensional carbon materials. The minimum reflection loss (RL) reaches −36 dB at 2.7 GHz when the ratio of the C_xN_y absorbent added in paraffin matrix is only 1:3. The bandwidth of the RL below −10 dB covers 7.7 GHz (8.1–15.8 GHz) at the sample thickness of 2.5 mm. A possible EM wave loss mechanism was proposed in detail. The multiple reflection and dielectric loss could govern the excellent EM absorption leading the product to a probable application in stealth materials.     

High electromagnetic wave absorbing performance of activated hollow carbon fibers decorated with CNTs and Ni nanoparticles

Activated hollow carbon fibers (ACHFs) decorated with carbon nanotubes (CNTs) and nickel nanoparticles (CNTs–Ni–ACHFs) were prepared by thermal reduction and chemical vapor deposition technique. Microwave reflection loss, permittivity and permeability of CNTs–Ni–ACHFs composites as novel electromagnetic wave absorbents were studied in the frequency range of 2–18 GHz. It was demonstrated that CNTs–Ni–ACHFs absorbents possessed the best microwave absorbing performances whose minimum reflection loss was −43.457 dB at 13.10 GHz with a thickness of 2.0 mm, which is much better than those of Ni–ACHFs and ACHFs samples. The dielectric polarizations and magnetic loss derived from the effect of the porous structures, Ni nanoparticles, and defects in the CNTs–Ni–ACHFs composites are playing an important role for the excellent microwave absorbing performances.     

Mixed and autothermal reforming of methane with supported Ni catalysts with a core/shell structure

Supported nickel catalysts with a core/shell structure of Ni/Al₂O₃ and Ni/MgO-Al₂O₃ synthesized under multi-bubble sonoluminescence (MBSL) conditions were tested for mixed steam and dry (CO₂) reforming and autothermal reforming of methane. In the previous tests, the supported Ni catalysts made of 10% Ni loading on Al₂O₃ or MgO-Al₂O₃ had shown good performances in the steam reforming of methane (methane conversion of 97% at 750 °C), in the partial oxidation of methane (methane conversion of 96% at 800 °C) and in dry reforming of methane (methane conversion of 96% at 850 °C) and showed high thermal stability for the first 50-150 h. In this study, the supported Ni catalysts showed good performance in the mixed and autothermal reforming of methane with their excellent thermal stability for the first 50 h. In addition, very interestingly, there was no appreciable carbon deposition on the surface of the tested catalysts after the reforming reaction.     

Enhanced electromagnetic wave absorption of Fe-doped silicon oxycarbide nanocomposites

Polymer-derived ceramics (PDCs), such as SiOC, SiCN, SiBCN, and SiC are considered the best candidates for designing high-performance microwave absorber due to their controllable structure, homogeneous element composition at atom level, tunable electromagnetic and electrochemical properties. Herein, Fe ions doped silicon oxycarbide (Fe ions-SiOC) ceramics have been successfully fabricated via solvothermal method. The electromagnetic absorption performances of the nanocomposites prove to be controllable via tailoring Fe ion contents. The Fe ions effectively enhance both the interfacial polarization of amorphous SiOC, and the dielectric properties of the nanocomposites but barely effect magnetic properties of the nanocomposite. As for 0.16 mol/L-SiOC ceramics annealed at 1450°C, the effective absorption bandwidth as high as 2.00 GHz and reflection loss of −59.60 dB at 5.40 GHz with the thickness of 4.55 mm are obtained. Such work opens up a novel and simple route to scale up the PDC-based materials with broadband and excellent microwave absorbing performances.     

High-efficiency electromagnetic wave absorption of TiB2-SiCnws-SiOC synthesised using PDCs

A designed conductive nanoheterogeneous structure can boost interfacial polarisation and effectively enhance the wave absorption properties. Herein, maze-shaped nanoheterogeneous TiB₂-SiCnws-SiOC ceramics were synthesised via a polymer-derived ceramics (PDCs) approach for constructing a three-dimensional reticular structure. The addition of TiB₂ not only compensates for the lower conductivity, but also facilitates the growth of curved SiCnws. The results show that the addition of 20 wt% TiB₂ leads to favourable microwave absorption performance, with a minimal reflection coefficient of − 55.1 dB at 8.9 GHz and an effective absorption bandwidth of 4.2 GHz. This can be ascribed to the synergistic effect among polarisation loss, conduction loss, and microwave multiple reflection and scattering due to the unique structure. This study may contribute towards establishing multi-loss mechanisms and controllable dielectric properties in PDCs.     

Fabrication and microstructural characterization of the diamond@amorphous carbon nanocomposite core/shell structure via in-situ polymerization

A novel diamond@carbon core/shell structure, constituting diamond as a hard core and carbon as a soft shell, was synthesized from resole resin and nanodiamond as the starting materials via in-situ polymerization and subsequently high-temperature carbonization. The diamond@carbon nanocomposite was characterized using field emission scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman spectra, and Fourier transform infrared spectroscopy (FT-IR). The results indicated that the shell material are comprised of amorphous carbon. The thickness of carbon shell was controlled from 502.5 nm to 27 nm by adjusting the concentration of the nanodiamond. As confirmed by TEM, FT-IR and XPS, the diamond@carbon nanocomposite revealed a stable structure, due to the formation of the chemical bonding between diamond and carbon shell after calcination process. Overall, the diamond@carbon nanocomposite abrasives could lead to a reducted surface roughness and damage of SiC wafer comparing with the nanodiamond abrasives, due to the spring-like effect coming from the elastic component of the amorphous carbon shell. Moreover, the as-prepared nanoparticles exhibited better dispersion stability than the pure diamond in the pH range from 8 to 11.     

Fabrication of carbon-doped ZnCo2O4 yolk-shell microspheres compounded with magnetic graphene for enhanced electromagnetic wave absorption performance

Carbon-doped ZnCo₂O₄ (ZnCo₂O₄/C) yolk-shell microspheres are synthesized by a method of thermally decomposing precursor and then successfully compounded with magnetic graphene (MG) via co-precipitation in combination with a reduction pathway. The fabrication processes and characterizations (XRD, XPS, TEM, EDS and SEM) are described and explained in detail. It is confirmed that amorphous carbon (in situ decomposition from PVP) is uniformly doped into ZnCo₂O₄ yolk-shell microspheres. In addition, the reflection loss (RL) and electromagnetic (EM) wave absorption mechanisms of as-prepared ZnCo₂O₄/C/MG composites are calculated and analyzed exhaustively. The results show that absorption bandwidth with RL exceeding −10 dB reaches up to 4.48 GHz with a matching thickness of 3.5 mm while the maximum RL is up to −52.9 dB at 7.52 GHz with a matching thickness of 3.9 mm. Enhanced EM wave absorption performance can be attributed to good dielectric and magnetic loss, excellent impedance matching, diverse interfacial polarization and multiple reflections caused by special structures.     

Enhanced electromagnetic absorption properties of Fe-doped Sc2Si2O7 ceramics

Doping transition metal elements in a crystal causes distortion and defects in the lattice structure, which change the electronic structure and magnetic moment, thereby adjusting the electrical conductivity and electromagnetic properties of the material. Fe-doped Sc₂Si₂O₇ ceramics were synthesized using the sol-gel method for application to microwave absorption. The effect of Fe-doped content on the electromagnetic (EM) and microwave absorption properties was investigated in the Ku-band (12.4–18 GHz). As expected, the dielectric and magnetic properties improve substantially with increasing Fe content. Fe doping causes defects and impurity levels, which enhance polarization loss and conductance loss, respectively. Fe replaces Sc atoms in the ScO₆ octahedral structure, creating a difference in spin magnetic moments, which increases the magnetic moment. Moreover, the magnetic coupling of Fe and O atoms occurs at the Fermi level, which benefits magnetic loss. In particular, when the Fe content is 6%, the fabricated Fe-doped Sc₂Si₂O₇ ceramics show an absorption property with absorption peaks located at 14.5 GHz and a minimum reflection loss (RL_min) of ?12.8 dB. Therefore, Fe-doped Sc₂Si₂O₇ ceramics with anti-oxidation and good microwave absorption performance have a greater potential for application in high-temperature and water-vapor environments.     

Preparation and characterization of polymer-derived Zr/Si/C multiphase ceramics and microspheres with electromagnetic wave absorbing capabilities

Precursors for Zr/Si/C multiphase ceramics were synthesized by the reactions of dilithiozirconocene complex with dichlorodimethylsilane, methyltrichlorosilane and dichloromethylvinylsilane, respectively. The precursor-to-ceramic process of the precursor was investigated by TG-GC–MS and TG-FTIR analyses, confirming a complete transformation from organometallic polymers into ceramics below 800 °C. Annealing experiments of the derived ceramics at temperatures from 1000 °C to 2000 °C indicated the crystallization from ZrSiO₄, ZrO₂ to ZrC. Furthermore, micrometer-sized Zr/Si/C ceramic microspheres were successfully fabricated from the precursor at 1000 °C, showing surface morphology like wrinkled pea. According to the XRD, HRTEM and XPS analyses, such multiphase ceramic microspheres consist of ZrSiO₄, ZrO₂, and amorphous SiO_xC_y. Interestingly, the ceramic microspheres performed satisfactory electromagnetic wave absorbing capacity with the RL_max reaching −34 dB, which could be potential candidates for electromagnetic micro-devices.     

Multi-interface-induced by regulating nanocomposite morphology and absorber design to achieve wideband electromagnetic wave absorber

The current study describes the fabrication of a bilayer microwave absorber made of magnetic Sr₂FeReO₆ (SRO) powder and a magnetoelectric nanocomposite formed of rod-like magnetic Sr₂FeReO₆ powder wrapped in polygonal SnS₂ powder (SRSS), which was then annealed and analyzed. The analysis of phase constituents, as well as morphological and magnetic measurements, revealed that rod and polygonal particles with soft magnetic properties were successfully synthesized. Additionally, our findings showed that 30:70 wt ratio nanocomposite powders were unable to exhibit broad X-band frequency absorption capabilities. Due to the bi-layer absorber's rational design, the reflection loss was found to be increased and reached -33 dB at 10.3 GHz by covering practically the whole X-band frequency with only 2.5 mm of thickness. The prepared absorber's optimum design included SRSS nanocomposite powder as an absorbing layer with a 1.5 mm thickness and SnS₂ powder as a matching layer. The exceptional electromagnetic wave dissipation performance of bi-layer samples compared to single-layer absorber samples may be the result of multiple interfaces being formed as a result of controlling component morphology and composition as well as the absorber's design, which enhanced critical absorbing factors like various polarization phenomena and relaxation losses. The research presented here suggests a simple method for enhancing microwave dissipation performance with a broad absorption band based on the development of heterojunction structures and the integration of various loss processes.     

Hollow porous magnetic/magnetic heterostructured CoFe/defective spinel microspheres template-free synthesis and effective modulation of microwave absorption performance

To create a spinel ferrite with excellent performance for electromagnetic (EM) wave absorption in the low frequency range of 4–6 GHz, compositions based on Co_0.75Zn_0.125Fe_0.125Fe₂O₄ (CZF–1) and Co_0.5Zn_0.25Fe_0.25Fe₂O₄ (CZF–2) with multiple elements substituted for A sites were synthesized by using solvothermal method. Hollow porous magnetic/magnetic heterostructure microspheres (HHMs) of CZF–A1 and CZF–A2 with multiple interfaces were prepared by hydrogen–thermal reduction of CZF–1 and CZF–2, and their unique structure and EM absorption properties were investigated in detail. The widest effective absorption bandwidth (EAB) of CZF–A1 and CZF–A2 was 4.1 GHz (13.6–17.7 GHz) and 3.7 GHz (8.0–11.7 GHz) for a corresponding thickness of 1.4 mm and 2.0 mm, respectively. In addition, the minimum reflection loss (R.L_min) of CZF–A1 and CZF–A2 reached –49.1 dB (at f_m = 13.4 GHz) and –45.0 dB (at f_m = 4.2 GHz) at a thicknesses of 1.6 mm and 3.7 mm, respectively. More specifically, in the low frequency region of 4–6 GHz, CZF–A1 and CZF–A2 exhibited excellent EM wave absorption due to the effective regulation of their natural resonance frequency. The EM wave absorption frequency band of CZF–A1 and CZF–A2 samples was able to completely cover the 4–6 GHz frequency region for at coating thickness of CZF–A1 and CZF–A2 was only 3.5 mm and 3.3 mm respectively, and their R.Lmin reached –36.5 dB and –22.6 dB. Moreover, the absorption mechanisms of CZF–A1 and CZF–A2 including magnetic resonance, eddy current loss, interfacial polarization and dipole polarization were also investigated in detail. This research provides new insights and guidance for the development of spinel ferrite-based EM absorbers for high efficiency EM wave absorption in the low frequency (4–6 GHz) region.     

Fabrication and evaluation of one-component core/shell structured latex adhesives containing poly(styrene) cores and poly(acrylate) shells

A one-component, non-crosslinked, and ambient temperature-cured core/shell (CS) structured waterborne poly(styrene-acrylate) (PStA) latex adhesive was prepared by two-stage seeded emulsion polymerization. The first-stage polymers were non-polar styrene-based copolymers with T_gs ranging from 86 °C to 41 °C and the second-stage polymer was polar acrylate-based copolymer having a T_g of 8 °C. The effect of latex particle morphology and film microstructure on the CS structured PStA latex adhesive was examined by evaluating film thermal properties and mechanical performance. The results have shown that incorporation of soft shell polymers into hard core polymers can improve adhesive properties without compromising film-forming ability. Wood adhesive performances of latex adhesive were measured by shear strength and boiling water resistance of glued wood blocks. The utilization performances of the one-component CS structured PStA latex adhesive were found to largely depend on CS morphological character and the interfacial compatibility between various polymeric constituents, demonstrating that fabrication of CS latex particles provides a promising approach to realize high-performance latex adhesives.     

Controllable dielectric properties and strong electromagnetic wave absorption properties of SiC/spherical graphite-AlN microwave-attenuating composite ceramics

Fully dense SiC/spherical graphite-AlN microwave-attenuating composite ceramics were manufactured via hot-pressing sintering, in which, apart from the primary SG (spherical graphite) attenuating agent, 5–30 wt% semiconductive α-SiC was employed as the second attenuating agent. The incorporation of SiC contributed to a slightly decreasing electrical conductivity and enhanced polarization relaxation. Controllable complex permittivities were obtained, namely, both the real and imaginary permittivities exhibit first a decrease and then an increase with the SiC addition, and which delivers an optimized impedance matching of the composites. RL_min values below ?10 dB (more than 90% absorption) were achieved by all the composites containing 5–20 wt% SiC with the sample thickness of 1–1.4 mm, and the absorption performance characteristics were significantly tunable by controlling the of SiC content at 8.2–12.4 GHz. Impressively, a superior reflection loss of ?46 dB (1.1 mm) and wide effective absorption bandwidth of 2.1 GHz were achieved at a 5 wt% SiC content, respectively, rendering SiC/SG–AlN composites a potential ultra-thin and highly efficient microwave-attenuating ceramic candidate.     

Preparation of carbon fibers@NiS/Ni3S4@MoS2 with core-sheath structure for high efficiency and wide-bandwidth microwave absorption

Numerous studies have focused on the preparation of carbon fibers (CFs)-based high-efficiency microwave absorbers with reasonable structural design and surface morphology control, which simultaneously meet the required impedance matching and loss ability. Here, CFs@NiS/Ni₃S₄@MoS₂ (CNNM) with core-sheath structure was prepared through several simple hydrothermal reactions. The morphology of the as-prepared CNNM nanocomposite is controlled by the amount of added sodium molybdate dihydrate, which causes the difference in minimum reflection loss (RL) and effective attenuation bandwidth among the samples. For the microwave absorbing performance, the minimum RL is ?18 dB and the effective attenuation bandwidth is 8.7 GHz, which appear at the thickness of 2.8 mm and cover most of the X- and Ku-bands. The excellent absorbing performance is attributed to optimized impedance matching and enhanced polarization loss. These results originate from the transition metal sulfides, which not only effectively prevent the skin effect by decreasing the conductivity of CFs but also increase interfaces and flaws, leading to interface polarization and dipole polarization losses.     

An overview of C-SiC microwave absorption composites serving in harsh environments

Adapting to extremely harsh service environments is an unavoidable challenge for microwave absorption (MA) materials. Among MA materials, C-SiC composites stand out due to their excellent overall performance. This article provides a comprehensive review of the latest and most critical achievements regarding C-SiC MA materials. First, an introduction to the most basic preparation methods for obtaining C-SiC composites is presented. Next, the MA mechanisms of these composites are thoroughly analyzed to clarify the origin and contribution of the dielectric loss mechanism, providing theoretical support and guidance for the design of MA materials. Most importantly, the MA performance of C-SiC composites in harsh environments, including their high-temperature resistance, thermal conduction, thermal insulation, and anti-corrosion behavior, are highlighted. Finally, the achievements and challenges faced by C-SiC composites are summarized and some useful suggestions are proposed to guide the multi-functional application of C-SiC composites in harsh environments.     

Enhanced microwave-absorbing properties of FeCo magnetic film-functionalized silicon carbide fibers fabricated by a radio frequency magnetron method

Silicon carbide (SiC) fibers have potential application in microwave absorption materials in recent years. In this study, we provide a new method for improving the microwave-absorbing properties of SiC fibers. Magnetic FeCo films were fabricated on SiC fibers at low temperature and high vacuum by a radio frequency magnetron sputtering method. The properties of FeCo film/SiC fiber (FeCo/SiC_f) composites were investigated. When compared with SiC fiber, the FeCo/SiC_f composites exhibit excellent microwave-absorbing properties in the microwave range, with enhancements in the optimal reflectivity loss from −5.03 to −25.51 dB. This excellent performance may be because of the magnetic loss due to ferromagnetic resonance and interfacial polarization, thus inducing dielectric relaxation. In addition, the magnetic properties of FeCo/SiC_f composites are significantly improved: the value of saturation magnetization reaches up to 41.45 emu/g and the coercivity is 116.27 Oe. In addition, the strength of SiC fiber remains at 99.17% after the fabrication process. The method provided in this study for enhancing the microwave-absorbing properties of FeCo/SiC_f composites will pave a new way for the development of SiC microwave-absorbing materials.