Fabrication of PANI@Ti3C2Tx/PVA hydrogel composite as flexible supercapacitor electrode with good electrochemical performance

Developing a new strategy to effectively prevent the restacking of MXene nanosheets will have significant impacts on designing flexible supercapacitor electrodes. Herein, a novel Ti₃C₂T_x/polyvinyl alcohol (PVA) porous sponge with 3D interconnected structures is prepared by sol-gel and freeze-dried methods. This Ti₃C₂T_x/PVA porous sponge is used as the template of in-situ polyaniline (PANI) polymerization, and the fabricated PANI@Ti₃C₂T_x/PVA hydrogel composite is applied as flexible supercapacitors electrodes. 1D conductive polymer chains PVA could increase the interlayer spacing of Ti₃C₂T_x nanosheets, which is beneficial to expose more electrochemical active sites. The supercapacitor based on PANI@Ti₃C₂T_x/PVA hydrogel composite exhibits the coexistence of double-layer capacitance and pseudocapacitance behavior. This supercapacitor shows a maximum areal specific capacitance of 103.8 mF cm^?2 at 2 A m^?2, and it also exhibits a maximum energy density of 9.2 μWh·cm^?2 and an optimum power density of 800 μW cm^?2. The capacitance of this supercapacitor is almost not change under different bending angles. Moreover, 99% capacitance retention is achieved after 10 000 charge/discharge cycles of the supercapacitor. The synergistic effect between PANI and Ti₃C₂T_x/PVA composite may improve the number of reactive sites and provide efficient channels for ion diffusion/electron transport.     

Manganese dioxide nanosheets decorated on MXene (Ti3C2Tx) with enhanced performance for asymmetric supercapacitors

The incorporation of nanosized pseudocapacitive materials and structure design are general strategies to enhance the electrochemical performance of MXene-based materials. Herein, the decoration of manganese dioxide (MnO₂) nanosheets on MXene (Ti₃C₂T_x) surfaces was prepared by a facile liquid phase coprecipitation method. Ti₃C₂T_x is initially modified by polydopamine (PDA) coating to ensure the homogeneous distribution of MnO₂ nanosheets and tight and close connections between MnO₂ and the Ti₃C₂T_x backbone. Due to the obtained three-dimensional (3D) nanostructure, facilitating electron transport within the electrode and promoting electrolyte ion accessibility, the δ-MnO₂@Ti₃C₂T_x-0.06 electrode yields superior electrochemical performances, such as a rather large areal capacity of 1233.1 mF cm^?2 and high specific capacitance of 337.6 F g^?1 at 2 mV s^?1, as well as high cyclic stability for 10000 cycles. Furthermore, δ-MnO₂@Ti₃C₂T_x-0.06 composites are employed as positive electrodes, and activated carbon (AC) materials act as negative electrodes with an aqueous electrolyte of 1 M Na₂SO₄ to assemble asymmetric supercapacitors. The prototype device is reversible at cell voltages from 0 to 1.8 V, and manifests a maximum energy density of 31.4 Wh kg^?1 and a maximum power density of 2700 W kg^?1. These encouraging results show enormous possibilities for energy storage applications.     

A high-performance supercapacitor electrode based on freestanding N-doped Ti3C2Tx film

Two-dimensional transition metal carbide (MXene) is a promising electrode material for supercapacitors because of its excellent electrochemical properties. Here, we report a controllable and facile strategy to prepare a freestanding and flexible N-doped Ti₃C₂T_x (N–Ti₃C₂T_x) film electrode with a hydrothermal method using hydrazine hydrate (N₂H₄∙H₂O) as a nitrogen source. At a scan rate of 2 mV s⁻¹, the N–Ti₃C₂T_x film electrode exhibits a high specific capacitance of 340 F g⁻¹ and no capacitance degradation after 10,000 cycles in 1 M H₂SO₄ electrolyte. These results show that the N–Ti₃C₂T_x film could be used as an outstanding electrode material for high-performance supercapacitors. The operation of hydrazine treatment provides a more practical and convenient experimental method for N-doping.     

Electrochemical storage mechanism of interstratification-assembled Ti3C2Tx MXene/NiCo-LDHs electrode in alkaline,acid and neutral electrolytes

Different kinds of two-dimensional hybrid electrodes have high theoretical capacitance and energy density. However, the origin of the electrochemical storage mechanism still remains elusive in alkaline, acid and neutral electrolytes. Herein, the interstratification-assembled Ti₃C₂T_x MXene/NiCo-LDHs electrodes were successfully prepared and studied in different electrolytes by in-situ Raman spectroscopy. The results show that H₂O molecules in neutral electrolyte combine with –OH at the end of Ti₃C₂T_x MXene during charging, and debonding occurs during discharge. Similarly, this reaction also occurs in the discharge process with NiCo-LDHs and provides smaller pseudocapacitance characteristics. Although this pseudocapacitance reaction also occurs in acidic and alkaline electrolytes, however, the difference is that the hydrogen ions will promote the electrochemical performance of Ti₃C₂T_x MXene and has a certain corrosion consumption effect on NiCo-LDHs, but generally improve the electrochemical performance of Ti₃C₂T_x MXene/NiCo-LDHs. Interestingly, the OH^? in alkaline electrolyte can promote the electrochemical performance of NiCo-LDHs, and produce a new electrochemical reaction with –F between the layers of Ti₃C₂T_x MXene, which greatly improves the overall electrochemical performance of this hybrid electrodes. As a result, Ti₃C₂T_x MXene/NiCo-LDHs electrodes have the best electrochemical performance in alkaline electrolyte with capacitance of 283 F g^?1, energy density of 14.2 Wh kg^?1 and power density of 3007.1 W kg^?1. This work lays a foundation for the preparation of high-performance two-dimensional hybrid electrochemical energy storage devices.     

Bifunctional Ti3C2Tx–CNT/PANI composite with excellent electromagnetic shielding and supercapacitive performance

Ti₃C₂T_x exhibits excellent electromagnetic (EM) shielding and electrochemical properties. However, the inherent re-stacking tendency and easy oxidation of Ti₃C₂T_x limit its further application. In this study, a multi-walled carbon nanotube/polyaniline composite (CNT/PANI, denoted as C–P) was introduced into Ti₃C₂T_x nanosheets to obtain a Ti₃C₂T_x–CNT/PANI composite (T@CP). Owing to the integrated effects of Ti₃C₂T_x and C–P, the contribution of absorption was significantly improved, which finally enhanced the EM shielding performance of T@CP. The highest total EM shielding effectiveness (SE_T) was close to 50 dB (49.8 dB), which was substantially higher than that of pure Ti₃C₂T_x (45.3 dB). Moreover, T@CP demonstrated outstanding supercapacitive performance. The specific capacitance of T@CP (2134.5 mF/cm² at 2 mV/s) was considerably higher than that of pure Ti₃C₂T_x (414.3 mF/cm² at 2 mV/s). These findings provide a new route for the development of high-efficiency Ti₃C₂T_x-based bifunctional EM shielding and electrochemical materials.     

2D/2D SnO2 nanosheets/Ti3C2Tx MXene nanocomposites for detection of triethylamine at low temperature

Highly active two-dimensional (2D) nanocomposites have been widely concerned in the field of gas sensors because of their unique advantages and synergistic effects. 2D/2D SnO₂ nanosheets/Ti₃C₂T_x MXene nanocomposites were synthesized by using layered Ti₃C₂T_x MXene and uniform SnO₂ nanosheets by hydrothermal method. Characterization results show that the SnO₂ nanosheets are well dispersed and vertically anchored on the layered Ti₃C₂T_x MXene surface, forming heterogeneous interfaces. Based on the gas-adsorption capabilities and synergistic effects of electronic properties, SnO₂ nanosheets/Ti₃C₂T_x MXene nanocomposites show high triethylamine (TEA) gas-sensing performance at low temperature (140 °C). The sensor responses of the nanocomposites and pure SnO₂ nanosheets to 50 ppm of TEA are 33.9 and 3.4, respectively. An enhancement mechanism for SnO₂ nanosheets/Ti₃C₂T_x MXene nanocomposites is proposed for highly sensitive and selective detection of TEA at low temperature. The combination strategy of two-dimensional metal oxide semiconductor and multilayer MXene provides a new way for the development of cryogenic gas sensors in the future.     

A novel “plane-line-plane” nanostructure of the sandwich-like CNTs@SnO2/Ti3C2Tx 3D nanocomposite as a promising anode for lithium-ion batteries

As one of the novel two-dimensional metal carbides, Ti₃C₂T_x has received intense attention for lithium-ion batteries. However, Ti₃C₂T_x has low intrinsic capacity due to the fact that the surface functionalization of F and OH blocks Li ion transport. Herein a novel “plane-line-plane” three-dimensional (3D) nanostructure is designed and created by introducing the carbon nanotubes (CNTs) and SnO₂ nanoparticles to Ti₃C₂T_x via a simple hydrothermal method. Due to the capacitance contribution of SnO₂ as well as the buffer role of CNTs, the as-fabricated sandwich-like CNTs@SnO₂/Ti₃C₂T_x nanocomposite shows high lithium ion storage capabilities, excellent rate capability and superior cyclic stability. The galvanostatic electrochemical measurements indicate that the nanocomposite exhibits a superior capacity of 604.1 mAh g^?1 at 0.05?A?g^?1, which is higher than that of raw Ti₃C₂T_x (404.9 mAh g^?1). Even at 3?A?g^?1, it retains a stable capacity (91.7 mAh g^?1). This capacity is almost 5.6 times higher than that of Ti₃C₂T_x (16.6 mAh g^?1) and 58 times higher than that of SnO₂/Ti₃C₂T_x (1.6 mAh g^?1). Additionally, the capacity of CNTs@SnO₂/Ti₃C₂T_x for the 50th cycle is 180.1 mAh g^?1 at 0.5?A?g^?1, also higher than that of Ti₃C₂T_x (117.2 mAh g^?1) and SnO₂/Ti₃C₂T_x (65.8 mAh g^?1), respectively.     

Preparation of 3D flower-like Ti3C2Tx microspheres by W/O emulsion-assisted assembly and their application for supercapacitors

In this study, we proposed in situ controlled preparation of 3D flower-like Ti₃C₂T_x microspheres (FMXMSs) by water-in-oil (W/O) emulsion-assisted assembly. Polyethyleneimine (PEI), as a large molecule, can effectively stabilize the emulsion system. Ethylenediamine (EDA), as a weak cross-link agent, contains rich amino groups, which can effectively induce the assembly of Ti₃C₂T_x in spherical droplets and eventually form 3D flower-like Ti₃C₂T_x microspheres. By adjusting the water-oil volume ratio, the size of micro-emulsion droplets can be controlled, thus the structure and size of microspheres can finally be controlled. The structure has a large specific surface area (108.31 m² g^-1) which can provide an effective ion diffusion pathway. As the supercapacitors electrode, the specific capacitance of FMXMSs is up to 224.57 F g^-1 at 5 mV s^-1 and 193.67 F g^-1 at 0.5 A g^-1. Moreover, they also show good long-term cyclic stability. After 5000 cycles, the specific capacitance does not decay. The results indicate that W/O emulsion-assisted assembly is feasible for preparing MXenes microspheres with high electrochemical performance.     

Enhancements of thermoelectric performance in n-type Bi2Te3-based nanocomposites through incorporating 2D Mxenes

Bi₂Te_2.7Se_0.3 compound has been considered as an efficient n-type room-temperature thermoelectric (TE) material. However, the large-scale applications for low-quality energy harvesting were limited due to its low energy-conversion efficiency. We demonstrate that TE performance of Bi₂Te_2.7Se_0.3 system is optimized by 2D Ti₃C₂T_x additive. Here, a 43% reduction of electrical resistivity is obtained for the nanocomposites at 380 K, originating from the increased carrier concentration. Consequently, the g = 0.1 sample shows a maximum power factor of 1.49 Wmm^?1K^?2. Meanwhile, the lattice thermal conductivity for nanocomposite samples is reduced from 0.77 to 0.41 Wm^?1K^?1 at 380 K, due to the enhanced phonon scattering induced by the interfaces between Ti₃C₂T_x nanosheets and Bi₂Te_2.7Se_0.3 matrix. Therefore, a peak ZT of 0.68 is achieved at 380 K for Bi₂Te_2.7Se_0.3/0.1 wt% Ti₃C₂T_x, which is enhanced by 48% compared with pristine sample. This work provides a new route for optimizing TE performance of Bi₂Te_2.7Se_0.3 materials.     

Broadband electromagnetic absorption of Ti3C2Tx MXene/WS2 composite via constructing two-dimensional heterostructure

Ti₃C₂T_x MXene, an emerging two-dimensional (2D) ceramic material, has rich interfaces and strong conductive networks. Herein, we have successfully built a heterostructure between Ti₃C₂T_x MXene and WS₂ to improve electromagnetic absorption performance. X-ray diffraction and X-ray photoelectron spectroscopy were used to determine the successful synthesis of Ti₃C₂T_x/WS₂ composite. Field emission scanning electron microscopy and transmission electron microscopy images show that WS₂ nanosheets are evenly dispersed on the accordion-like Ti₃C₂T_x MXene. Importantly, Ti₃C₂T_x MXene/WS₂ composite has sufficiently high dielectric loss and impedance matching due to self-adjusting conductivity and 2D heterostructure interfaces. As a result, the Ti₃C₂T_x/WS₂ composite has a minimum reflection loss (RL_min) of −61.06 dB at 13.28 GHz. Besides, it has a broad effective absorption bandwidth (EAB) of 6.5 GHz, with EAB >5.0 GHz covering a wide range of thickness. Such impressive results may provide experience for the application of Ti₃C₂T_x ceramics and 2D materials.     

MXene supported rhodium nanocrystals for efficient electrocatalysts towards methanol oxidation

Since conventional Pt/carbon catalysts usually suffer from CO poisoning as well as carbon corrosion issues during the methanol oxidation reaction, it is essential to explore high-efficiency Pt-alternative electrocatalysts supported by a robust matrix in the direct methanol fuel cells. Herein, we report a convenient low-temperature approach to the controllable fabrication of well-dispersive Rh nanocrystals in situ grown on Ti₃C₂T_x MXene nanosheets. The ultrathin lamellar MXene structure reveals unique superiorities on the construction of advanced Rh-based hybrid catalysts, which can not only provide a large number of efficient anchoring sites for immobilizing small-sized Rh nanocrystals with abundant exposed catalytic crystal planes, but also enable direct electronic interaction with Rh for strong synergistic effects and facilitate the fast charge transportation during the catalytic process. As a consequence, the resulting Rh/Ti₃C₂T_x hybrid exhibits prominent electrocatalytic properties towards methanol oxidation reaction, such as a large electrochemical active surface area of 71.6 m² g^?1, a high mass activity of 600.2 mA mg^?1, and good long-term stability, all of which are much better than those of conventional carbon-supported Rh as well as Pt/C and Pd/C catalysts.     

Fabrication of 2D titanium carbide MXene/Au nanorods as a nanosensor platform for sensitive SERS detection

As an emerging label-free detection technology, surface-enhanced Raman scattering (SERS) has been used for biological detection, food safety, and environmental pollution owing to its high sensitivity, specificity and rapid response. However, traditional SERS substrates are unstable, prone to agglomeration, and demonstrate low productivity and high production cost. In this work, hybrids of a two-dimensional electron gas (2DEG) Ti₃C₂T_x monolayer and Au nanorods (AuNRs) were fabricated via self-assembly. Ti₃C₂T_x:AuNRs ratios were prepared, and each hybrid's SERS activity was evaluated through 4-aminothiophenol (pATP) detection. The Ti₃C₂T_x/AuNRs-1 substrate exhibited the weakest SERS performance, whereas the Ti₃C₂T_x/AuNRs-3 substrate had the best SERS activity enhancement, with a pATP limit of detection (LOD) of 10⁻⁹ M. When 30 sites on substrates were selected for SERS detection, the relative standard deviation (RSD) was found to be only 7.18 %, revealing the good performance sensitivity and high reproducibility of the Raman signal. The sensitivity of Ti₃C₂T_x/AuNRs-3 was also assessed with respect to a hazardous chemical, 1,2-bis (4-pyridyl) ethylene (BPE), revealing an LOD of 10⁻¹² M. For thiram, the LOD of Ti₃C₂T_x/AuNRs-3 was 10⁻⁸ M, which is considerably lower than the 1 ppm industry safety standard. A relative standard deviation RSD of 7.94 % indicates the high reproducibility and uniformity of the Raman signal of thiram for Ti₃C₂T_x/AuNRs-3. Compared with the LODs of 10⁻⁵ M and 10⁻⁶ M for commercial substrates T-SERS and Au nanorod arrays (AuNRAs), respectively, the 10⁻⁸ M LOD of our synthesized Ti₃C₂T_x/AuNRs indicates good sensitivity. Three kinds of pesticides were detected by Ti₃C₂T_x/AuNRs, and only Raman signal of thiram can be found, revealing the good selectivity for thiram. These results for Ti₃C₂T_x/AuNRs suggest its potential to serve as a novel SERS platform.     

Perforative pore formation on nanoplates for 2D porous MXene membranes via H2O2 mild etching

MXene (Ti₃C₂T_x) is a novel, two-dimensional (2D) layered material that is atomically thin, exhibits good mechanical strength, and is ideal for fabricating efficient membranes for molecular separation. However, the applications of MXene membranes are limited by their low water permeability owing to narrow channels and high tortuosity. A novel strategy for introducing artificial pores on the surface of MXene nanosheets via gentle in situ chemical etching with hydrogen peroxide (H₂O₂) to prepare porous MXene nanosheets (PMS) is reported herein. This greatly increases the water permeability of MXene membranes while retaining the high rejection of small-molecule dyes. Permeable pores generated on MXene nanosheets transform the transport model of water molecules in the membrane from typical horizontal transport pathways dominated by interlayer channels to longitudinal–lateral three-dimensional transport pathways, affording increased water molecule transport channels and reduced transport distance. Based on different etching conditions, the obtained membranes exhibit high pure-water permeability ranging from 9.37 to 42.48 L m⁻² h⁻¹ bar⁻¹. Moreover, mild etching maintains the 2D structure of the membrane and retains a nearly complete rejection of congo red dye. This study provides a novel and effective strategy for preparing high-performance porous laminar MXene membranes for dye-separation applications.     

Hierarchical materials constructed by 1D hollow nickel–cobalt sulfide nanotubes supported on 2D ultrathin MXenes nanosheets for high-performance supercapacitor

To design and prepare novel composites with strong electrode structure and superior electrochemical performances via a facile and convenient synthesis method is a significant challenge to develop the high-performance materials for energy storage and conversion devices. Herein, we fabricated a novel hybridization of two dimensional (2D) Ti₃C₂-MXenes nanosheets and one dimensional (1D) nickel-cobalt sulfide (NiCo₂S₄) hollow nanotubes though the favorable electrostatic interaction between the negatively charged Ti₃C₂ and positively charged NiCo₂S₄ nanotubes. The electrode combined the good metallic conductivity of Ti₃C₂-MXenes and high pseudo-capacitance of NiCo₂S₄ demonstrated the outstanding electrochemical performance for supercapacitors. Herein, 2D Ti₃C₂-MXenes/1D NiCo₂S₄ hybrid electrode achieved an excellent specific capacitance of 1927 F g^-1 at 2 mV s^-1, long cycling stability for 4000 cycles and charming rate performances, which is mainly ascribed to the synergistic effect and interfacial interaction between two components. Particularly, the novel hybrid material with 1D and 2D hierarchical structures can provide additional electrochemical reaction sites, supply shorter paths for ions diffusion and electron transport, and effectively raise the charge transfer kinetics during the electrochemical process, which explores a new strategy aimed to develop 2D Ti₃C₂-MXenes energy storage devices with high electrochemical performance, and is possible potential for expansion into other application fields.     

Ultrathin Ti3C2Tx nanosheets modified separators for lithium–sulphur batteries

Currently, among the various emerging energy storage systems, the lithium–sulphur (Li-S) battery is expected to be one of the next-generation lithium secondary batteries with high efficiency. However, the practical application of Li-S batteries still faces many obstacles. To solve the shuttle effect of lithium polysulphides, ultrathin Ti₃C₂T_x nanosheets were prepared through the in-situ acid etching method and applied to separator modification to suppress the shuttle effect of lithium polysulphides. Ultrathin Ti₃C₂T_x nanosheets with enlarged interlayer spacing accelerated the migration of Li⁺. The abundant termination groups on the surface of Ti₃C₂T_x played the role of the lithium polysulphide capture centre. When the mass loading of separator modification materials was set as 0.025 mg cm⁻², the as-prepared battery exhibited a reversible specific capacity as high as 780 mAh g⁻¹ after 200 cycles at 0.2 C, and the single-cycle capacity decay rate was only 0.09%.     

Synthesis,characterization and antifungal property of Ti3C2Tx MXene nanosheets

Although the antibacterial properties of MXene nanosheets containing Ti₃C₂T_x are known, their antifungal properties have not been well studied. Herein, we present for the first time a report on the antifungal properties of Ti₃C₂T_x MXene. The Ti₃C₂T_x MXene was obtained by first exfoliating MAX phase of Ti₃AlC₂ with concentrated hydrofluoric acid, then the Ti₃C₂T_x was intercalated and deliminated by ethanol treatment and ultrasonication process. The delaminated Ti₃C₂T_x MXene nanosheets (d-Ti₃C₂Tx) were characterized using field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray (EDX), X-ray diffraction spectroscopy (XRD), and Raman spectroscopy. It was found that Ti₃C₂T_x MXene was characterized by lamellar structure alternating with layers of Ti, Al and C. The EDX results revealed that the delaminated Ti₃C₂T_x MXene nanosheets were composed of Ti, C, Si, O, F, and a trace amount of Al. The XRD and Raman spectra further indicated the elimination of Al and the formation of two-dimensional Ti₃C₂T_x MXene nanosheets. The antifungal activity of the delaminated Ti₃C₂T_x MXene was determined against Trichoderma reesei using the modified agar disc method. Observation using inverted phase contrastmicroscopy revealed inhibited fungus growth with the absence of hyphae around the discs treated wtih MXene. The surrounding of the control groups without an inclusion of MXene was found with large number of hyphae and spores. In addition, the spores of the fungi treated with the samples containing d-Ti₃C₂T_x MXene nanosheets did not germinate even after 11 days of culture. The results demonstrated disruption to the hemispheric structural formation of fungi colony, inhibition of hyphae growth and cell damage for fungi grown on the d-Ti₃C₂T_x MXene nanosheets. These new findings suggest that d-Ti₃C₂T_x MXene nanosheets developed in this work could be a promising anti-fungi material.     

Ti3C2Tx-foam as free-standing electrode for supercapacitor with improved electrochemical performance

To prevent restacking of the Ti₃C₂T_x layers, the Ti₃C₂T_x-foam has been successfully synthesized through thermal treatment of Ti₃C₂T_x-film with the hydrazine monohydrate. The interconnected porous structure of Ti₃C₂T_x-foam could effectively reduce the restacking of the Ti₃C₂T_x sheets and shorten the diffusion path of ions and accelerate the intercalation/de-intercalation of ions. The Ti₃C₂T_x-foam-80 used as free-standing electrode achieves a high areal capacitance of 271.2 mF/cm² (122.7?F/g) at a scan rate of 5?mV/s in 1?M KOH electrolyte. It also exhibited a high capability rate of 65.5% from 5?mV/s to 100?mV/s and good cycle life with 88.7% retention of its initial after 10,000 cycles at a scan rate of 50?mV/s.     

Fabrication and thermal stability of two-dimensional carbide Ti3C2 nanosheets

Two-dimensional Ti₃C₂ nanosheets were obtained by exfoliation of synthesized Ti₃AlC₂ powders in 40% HF solution at room temperature. The influence of etching time on the synthesis, structural evolution during heating, and thermal stability of as-prepared Ti₃C₂ nanosheets were studied. The graphene-like structure of as-prepared Ti₃C₂ nanosheets was confirmed by XRD and SEM. TG–DTA and elemental analysis suggested that the OH and F groups attached on the surface of Ti₃C₂ nanosheets could be eliminated by heat treatment. It is noteworthy that Ti₃C₂ nanosheets are thermal stable up to 1200 °C in Ar atmosphere. In the heating process, a small quantity of TiO₂ anatase emerges at 500 °C and then reacts with Ti₃C₂ to form a solid solution of TiC_xO_1−x (0<x<1) with the increase of temperature.     

Subsize Ti3C2Tx derived from molten-salt synthesized Ti3AlC2 for enhanced capacitive deionization

Ti₃C₂T_x is a promising intercalation-type electrode material for capacitive deionization (CDI). However, Ti₃C₂T_x, obtained from traditional synthesized Ti₃AlC₂, is with large particle size and undersized interlayer space, which can easily lead to the longer ion diffusion path, fewer adsorption sites, and higher ion diffusion barrier in CDI process. In this work, subsize and Na⁺ intercalated Ti₃C₂T_x (Na⁺-Ti₃C₂T_x-MS) was prepared by HF etching KCl-assisted molten-salt synthesized Ti₃AlC₂ and following NaOH treatment. The Na⁺-Ti₃C₂T_x-MS achieves a high electrosorption capacity of 14.8 mg/g and a high charge efficiency of 0.81 at the applied voltage of 1.2 V in 100 mg/L NaCl solution. Besides, the stable desalination performance of Na⁺-Ti₃C₂T_x-MS has been confirmed. The superior performance of Na⁺-Ti₃C₂T_x-MS can be attributed to the subsize particle and larger interlayer space. Both two factors can effectively increase ions adsorption sites, shorten diffusion path lengths, and reduce diffusion barriers in the CDI process.     

Improvement of gas sensing property for two-dimensional Ti3C2Tx treated with oxygen plasma by microwave energy excitation

Two-dimensional layered Ti₃C₂T_x MXene was prepared through hydrothermal etching method with LiF and hydrochloric (HCl) acid. Ti₃C₂T_x was further treated with oxygen plasma activated by microwave energy to obtain the activated Ti₃C₂T_x at different temperatures ranging from 350 °C to 550 °C. The gas-sensing properties of raw Ti₃C₂T_x and Ti₃C₂T_x activated with oxygen microwave plasma were tested toward different volatile organic compounds gases. The results indicated that Ti₃C₂T_x activated at 500 °C exhibited excellent gas-sensing properties at room temperature (25 °C) to 100 ppm ethanol with a value of 22.47, which is attributed to the enhancement of the amount of oxygen functional groups and defects on the MXene Ti₃C₂T_x film, and in turn to lead to more oxygen molecules adsorption and desorption reaction in the active defect sites. The enhancement of ethanol-sensing performance demonstrated that the activated Ti₃C₂T_x possess great potential in gas sensing.