Enhancing pyroelectric properties in (Pb1–1.5xLax)(Zr0.86Ti0.14)O3 ceramics through composition modulated phase transition

Currently, there is an urgent need of extraordinary comprehensive pyroelectric materials for the wide application in detectors and energy harvesters. In this study, the (Pb_1–1.5xLa_x)(Zr_0.86Ti_0.14)O₃ (abbreviated as PLZT, x?=?0.02, 0.03, 0.04 and 0.05) ceramics located in ferroelectric-antiferroelectric (FE-AFE) phase boundary were designed and synthesized by using conventional solid-state reaction method. The microstructures, phase structures, dielectric, ferroelectric, thermal depolarization and pyroelectric properties of the PLZT ceramics with different La content were investigated thoroughly. The XRD results show that the PLZT ceramics change from FE phase to AFE phase with increasing La content. The significant improvement of pyroelectric coefficient $p$ and figures of merit (FOMs) are achieved in the PLZT ceramics with the increase in La content because of the increased metastable ferroelectric phase under the application of electric field. The (Pb_0.955La_0.03)(Zr_0.86Ti_0.14)O₃ (x?=?0.03) ceramic exhibits not only high $p$ of $5.2\times {10}^{?8}\mathrm{C}/{\mathrm{cm}}^2\mathrm{K}$ and high depolarization temperature (T_d) of 179?℃ but also excellent FOMs with $F_i=2.2\times {10}^{?10}\mathrm{m}/\mathrm{V}$, $F_v=5.0\times {10}^{?2}{\mathrm{m}}^2/\mathrm{C}$, and $F_d=3.47\times {10}^{?5}{\mathit{Pa}}^{?1/2}$. In addition, the highest $p$ of $6.8\times {10}^{?8}\mathrm{C}/{\mathrm{cm}}^2\mathrm{K}$ is achieved in (Pb_0.94La_0.04)(Zr_0.86Ti_0.14)O₃ (x?=?0.04) ceramic. These results demonstrate that the PLZT ceramics of x?=?0.03 and 0.04 are promising candidates for pyroelectric applications.     

La0.7−xLnxCa0.3MnO3(Ln=ProrSm) perovskites as electrode materials for SOFCs

In this work, the Pechini method was used to synthesize $L{a}_{0.7?x}L{n}_{x}C{a}_{0.3}Mn{O}_{3,}(Ln=ProrSm)$-${\text{La}}_{1?\text{x}}{\text{Ln}}_{\text{x}}{\text{Ca}}_{0.3}{\text{MnO}}_3$ type perovskites, evaluating the effect of the type of cation and composition on the structural, morphological and textural properties. The use of similar rare earth cations was studied to promote weak bonds between the reactive surface and adsorbed oxygen species that could facilitate the oxygen reduction reaction and thus improve electrochemical performance of SOFC devices. To achieve this goal, different compositions of Pr or Sm ions (x = 0.1, 0.3, 0.5 or 0.6) were used for the partial substitution of lanthanum at the A site. The results indicated that the substitution of La by Pr or Sm did not modify the original orthorhombic perovskite structure of Ca-doped lanthanum manganites. However, a shift in the main reflections can be obtained as the content of both cations increases due to cell distortion. Rietveld refinement confirms that the crystal structure belongs to the Pnma space group with a large distortion along the b-axis but no secondary phase formation. The compensated charge neutrality of the Mn³⁺/Mn⁴⁺ ratio influences the octahedral sites of MnO₆ and cell volume. Orthorhombic distortion ($\frac{c}{\sqrt{2}}<a<b$) occurs through Jahn-Teller mechanism promoting a hole-doped system for electrical conductivity. The adsorption-desorption isotherms reveal that in any composition of Pr, a mesoporous isotherm (type IV) is obtained. In contrast, the isotherms changed from micro- to meso-porous features depending on the amount of Sm substitution at the A-site. All the prepared samples showed a soft granular structure with agglomerates ranging between 200 and 300 nm with well-interconnected pores. Comparing the La substitution by Pr or Sm, it was found that Sm can form perovskites that can better promote oxygen vacancies and triple boundary phase formation, which is essential in SOFC devices.     

Structure,bond characteristics and Raman spectra of CaMg1-xMnxSi2O6 microwave dielectric ceramics

The CaMg_1-xMn_xSi₂O₆(x = 0–0.08)ceramics were reported here for the first time. The relationships among structural characteristics, vibrational modes and dielectric properties for the ceramics were researched based on complex chemical bond theory and Raman vibrational spectroscopy. The formation of a single phase with clinopyroxene structure when x = 0 to 0.08 was detected by X-ray diffraction. The monotonous increase of ${\epsilon }_r$ is ascribed to the average bond covalency, polarizability and Raman shift. The $Q\times f$ value is influenced by total lattice energy and full width at half maximum of Raman spectra which are both connected with the intrinsic loss. The variation of ${\tau }_f$ is related to thermal expansion coefficient and M1-site bond valence. Furthermore, the CaMg_0.98Mn_0·02Si₂O₆ ceramic sintered at 1300 °C possessed optimal microwave dielectric properties of ${\epsilon }_r$ = 8.01, $Q\times f$ = 83469 GHz and ${\tau }_f$ = −45.27 ppm/°C.     

Effects of Zn substitution on high-frequency properties of Ba1.5Sr1.5Co2-xZnxFe22O41 hexaferrites

Ba_1.5Sr_1.5Co_2-xZn_xFe₂₂O₄₁(x = 0,0.4,0.8,1.2,1.6,2.0) hexaferrites substituted by Zn were prepared via conventional solid-state reaction. The influences of Zn substitution content on phase formation, microstructure, and magnetic properties, especially high-frequency magnetic properties, were systematically investigated. Results indicate that, when sintering temperature is 1200 °C, pure ferrite phase of Co₂Z is formed, and Zn²⁺ is successfully incorporated into the lattice. Appropriate amount of Zn substitution can improve the densification and saturation magnetization ($M_s$) of Z-type ferrite, thereby effectively promoting permeability. However, due to limitations of Snoek's law, cut-off frequency is found to be reduced with Zn substitution. For x = 0.4, the sample exhibits both high permeability (up to 22.49) and high cut-off frequency (~900 MHz), with Snoek constant $({\mu }_i?1)\times f_r$ reaching 19.337 GHz. Furthermore, magnetic loss for the sample with x = 0.4 is found to be low. It is anticipated that this material will have extensive application prospects for miniaturization and high frequency antenna applications.     

Correlation of the crystal features,magnetic parameters,and electronic structure of Bi-substituted BaFe12-xBixO19 hexaferrites: Theoretical background

Herein, using first-principles density functional theory (DFT) calculations, we have investigated the effects of Bi substitution on the structural, electronic, and magnetic properties of barium hexaferrite (BaFe_12-xBi_xO₁₉, x = 0; 0.5; 1.5 and 2). As a result of the calculation, it was determined that the most stable structure exists if the spin of the Fe atom on the 2a, 2b, and 12k positions of the barium hexaferrite compound is taken in the upward direction. The calculated lattice constant $\left(\raisebox{1ex}{$\mathrm{c}$}\!\left/ \!\raisebox{-1ex}{$\mathrm{a}$}\right.=3.9\right)$ and magnetic moment $\left(4.24{\mu }_{\mathrm{B}}\right)$ of iron ions are in reasonable agreement with other experimental works. Moreover, the presence of bismuth reduces the electronic band gap. Energy gain and magnetic anisotropy energy calculations for FIM, FM, and NM states were performed for the most stable states. It has been established that the most stable structural state is characteristic of х = 0.5. It has been calculated that substitution by the large Bi³⁺ ion dramatically changed the electronic structure and sharply reduced the band gap. This paper is the first step towards establishing the nature of the distribution of ions in M-type hexaferrites under conditions of substitution by ions with a large ionic radius.     

Structural dependence of microwave dielectric properties of spinel structured Mg2(Ti1-xSnx)O4 solid solutions: Crystal structure refinement,Raman spectra study and complex chemical bond theory

Mg₂(Ti_1-xSn_x)O₄ (x?=?0–1) ceramics were prepared through conventional solid-state method. This paper focused on the dependence of microwave dielectric properties on crystal structural characteristics via crystal structure refinement, Raman spectra study and complex chemical bond theory. XRD spectrums delineated the phase information of a spinel structure, and structural characteristic of these compositions were achieved with the help of Rietveld refinements. Raman spectrums were used to depict the correlations between vibrational phonon modes and dielectric properties. The variation of permittivity is ascribed to the Mg₂(Ti_1-xSn_x)O₄ average bond covalency. The relationship among the B-site octahedral bond energy, tetrahedral bond energy and temperature coefficient are discussed by defining on the change rate of bond energy and the contribution rate of octahedral bond energy. The quality factor is affected by systematic total lattice energy, and the research of XPS patterns illustrated that oxygen vacancies can be effectively restrained in rich oxygen sintering process. Obviously, the microwave dielectric properties of Mg₂(Ti_1-xSn_x)O₄ compounds were obtained (${\epsilon }_r$= 12.18, $Q\times f$?=?170,130?GHz, ${\tau }_f$?=??53.1?ppm/°C, x?=?0.2).     

Effect of annealing on structure and properties of Ta–O–N films prepared by high power impulse magnetron sputtering

High power impulse magnetron sputtering of a Ta target in various $\mathrm{Ar}+{\mathrm{O}}_2+{\mathrm{N}}_2$ gas mixtures was utilized to prepare amorphous tantalum oxynitride (Ta–O–N) films with a finely controlled elemental composition in a wide range. We investigate the effect of film annealing at $900°\mathrm{C}$ in vacuum on structure and properties of the films. We show that the finely tuned elemental composition in combination with the annealing enables the preparation of crystalline Ta–O–N films exhibiting a single TaON phase with a monoclinic lattice structure, refractive index of $2.65$ and extinction coefficient of $2.0\times {10}^2$ (both at the wavelength of $550\mathrm{nm}$), optical band gap width of $2.45\mathrm{eV}$ (suitable for visible light absorption up to $505\mathrm{nm}$), low electrical resistivity of $0.4\text{Ω}\mathrm{cm}$ (indicating enhanced charge transport in the material as compared to the as-deposited counterpart), and appropriate alignment of the band gap with respect to the redox potentials for water splitting. These films are therefore promising candidates for application as visible-light-driven photocatalysts for water splitting.     

Novel polymer composites of RuO2@nBaTiO3/PVDF with a high dielectric constant

The dielectric properties of a novel polymer dielectric material were investigated. The conductive phase of RuO₂ was synthesized for deposition on the surface of a nanosized BaTiO₃ (nBT). The RuO₂@nBT hybrid particles were incorporated into a poly (vinylidene fluoride) (PVDF) as a three-phase composite (RuO₂@nBT/PVDF). The obtained dielectric constant (ε′) was significantly high (3837.16) for the composite with a volume fraction of $f_{Ru{O}_2@nBT}$ = 0.50. The large interfacial polarization between the RuO₂?nBT and RuO₂?PVDF interfaces considerably increased the value of ε′. Therefore, interfacial polarization is a critical factor in improving the dielectric properties. The dielectric behavior of the RuO₂@nBT/PVDF composites can be described using the effective medium percolation theory model, which indicates the significant contributions of the conductive RuO₂ phase and high-permittivity nBT phase.