Improved thermal shock resistance of low-carbon Al2O3–C refractories fabricated with C/MgAl2O4 composite powders

The addition of C/MgAl₂O₄ composite powders can improve the thermal shock resistance of low-carbon Al₂O₃–C refractories attribute to the formation of microcracks in the agglomerated structure, thus consuming more thermal stress and strain energy. Moreover, C/MgAl₂O₄ composite powders additive promote the formation of short fibrous ceramic phases in the refractories, which suggest a bridging role in the interior of the refractories and increase its toughness. Furthermore, the C/MgAl₂O₄ composite powders also result in a remarkable enhancement of the slag corrosion resistance in the refractories.     

Improved thermal shock stability and oxidation resistance of low-carbon MgO–C refractories with introduction of SiC whiskers

This research focuses on the utilization of SiC whiskers synthesized from rice husk powders in low-carbon magnesia–carbon (MgO–C) refractories, and attempts to reduce the flake graphite content in refractories by adding synthesized SiC whiskers. The effect of the addition amount of SiC whiskers on the microstructure, mechanical properties, thermal shock stability and oxidation resistance of MgO–C refractories with different graphite content was studied. The results indicated that the introduction of SiC whiskers facilitated the generation and growth of ceramic phases in MgO–C refractories. By adding 1 wt% SiC whiskers, the graphite content could be reasonably reduced (from 5 wt% to 4 wt%), and the strength, thermal shock stability and oxidation resistance of refractories were enhanced by the synergistic effect of the introduced SiC whiskers and the generated ceramic phases, the CMOR, CCS, residual CCS, and oxidation resistance were increased by 44, 6, 12 and 27% respectively.     

Enhanced performance of low-carbon MgO–C refractories with nano-sized ZrO2–Al2O3 composite powder

Low-carbon MgO–C refractories are facing great challenges with severe thermal shock and slag corrosion in service. Here, a new approach, based on the incorporation of nano-sized ZrO₂–Al₂O₃ composite powder, is proposed to enhance the thermal shock resistance and slag resistance of such refractories in this work. The results showed that addition of ZrO₂–Al₂O₃ composite powder was helpful for improving their comprehensive performances. Particularly, the thermal shock resistance of the specimen containing 0.5 wt% composite powder was enhanced significantly which was related to the transformation toughening of zirconia and in-situ formation of more spinel phases in the matrix; also, the slag resistance of the corresponding specimen was significantly improved, which was attributed to the optimization of pore structure and formation of much thicker MgO dense layer.     

Mechanism and microstructural evolution of combustion synthesis of ZrB2–Al2O3 composite powders

Mechanism of combustion synthesis (CS) of ZrB₂–Al₂O₃ composite powders was systematically analyzed by a combustion front quenching method (CFQM). The microstructural evolution during the CS process was investigated by field-emission scanning electron microscopy (FESEM) equipped with energy dispersive X-ray spectrometer (EDS). The combustion temperature and wave velocity were measured by the data acquisition system. Moreover, the phase constituents of the final product were examined by X-ray diffraction (XRD). The thermal behaviors of the stoichiometic powders under the thermal exposure were characterized using differential scanning calorimetry (DSC) and thermogravimetric (TG). The results showed that the combustion reaction started from the melting of the B₂O₃ and Al particles, which was followed by the formation of ZrO₂–B₂O₃–Al solution. The ignition temperature of this system was determined to be around 800 °C. B and Al₂O₃ were then precipitated from the solution. As the CS reaction proceeded, Zr and Al₂O₃ were produced by the reaction between ZrO₂ particles and Al and precipitated from the solution. ZrB₂ could then be formed by the direct reaction between Zr and B. Finally, the ZrB₂–Al₂O₃ composite powders were obtained. Furthermore, a model corresponding to the dissolution–precipitation mechanism was proposed.     

Application of Cr3C2/C composite powders synthesized via molten-salt method in low-carbon MgO–C refractories

High-performance and low-carbon MgO–C refractories are important refractories for smelting ultra-low carbon steel and clean steel. Based on this, Cr₃C₂/C composite powders were synthesized by the molten-salt method, and used as an additive to prepare low-carbon MgO–C refractories under nitrogen atmosphere. The phase, morphology and oxidation kinetics of Cr₃C₂/C composite powders were studied. In addition, the effect of Cr₃C₂/C composite powders on the morphology, mechanical properties, thermal shock resistance, and corrosion resistance of MgO–C refractories was investigated. The results indicated that the Cr₃C₂/C composite powders exhibited superior oxidation resistance than flake graphite. Moreover, the Cr₃C₂/C composite powders were introduced into the MgO–C refractories. Compared with the sample without Cr₃C₂/C composite powders, the introduction of 1 wt% Cr₃C₂/C composite powders significantly improved the thermomechanical properties and corrosion resistance of the material, its CMOR, CCS before and CCS after thermal shock were 9.06 MPa, 50.40 MPa and 32.60 MPa, respectively, and the corrosion index was significantly reduced from 44.6% to 26.5%.     

Influence of Ti3AlC2 addition on water vapor resistance of low-carbon Al2O3–C refractories

Al₂O₃–C refractories are potential candidates for use in gasifiers, and they are Cr₂O₃-free. However, the oxidation of the carbon species and ceramic phases within the high-temperature water vapor environment may deteriorate the integrity of the working lining. Ti₃AlC₂ has been verified as an effective antioxidant for Al₂O₃–C refractories in air. In this study, the structural transformation of Ti₃AlC₂ during heat treatment and the water vapor resistance of Ti₃AlC₂-containing Al₂O₃–C refractories are investigated. The results show that the oxidation of Ti₃AlC₂ and Si in the matrix contributes to the in situ formation of a multilayer core–shell structure of TiC–AlTi₂O₅–Al₆Si₂O₁₃. These structural evolutions improve densification and stimulate pore size refinement, which enhances the mechanical properties and thermal stress resistance of the specimens. In particular, the refined pore size contributes to the significantly improved water vapor resistance at high temperatures.     

Improvements on the thermal shock behaviour of MgO–spinel composite refractories by incorporation of zircon–3 mol% Y2O3

The effects of incorporations of zircon–3 mol% Y₂O₃ (Y) into MgO–spinel (M–S) compositions to improve mechanical properties and thermal shock behaviour were investigated. Mechanical properties were measured, R ? R_st parameters were calculated, and thermal shock tests were performed. Microstructural features were examined using SEM and XRD. By adding zircon + Y to M–S: (i) up to ～2 and ～3-fold improvements were achieved in mechanical properties and R ? R_st parameters, (ii) there were improvements up to ～2-fold in strength data measured after performing thermal shock tests at 1000 °C. Parameters improving mechanical properties and thermal shock behaviour of M–S–(zircon + Y) materials are given as follows: (i) interlinking and arresting or deviation of microcracks when reaching the ZrO₂–Y₂O₃ grains or pores, increases in (ii) K_Ic, (iii) critical defect size and (iv) bulk density, (v) formation of forsterite phase, (vi) coexistence of intergranular and transgranular fractures, and (vii) reduction in MgO grain size, leading to longer service life.     

Enhanced oxidation resistance of low-carbon MgO–C refractories with Al3BC3–Al antioxidants: A synergistic effect

The synergistic effects of Al₃BC₃–Al antioxidants on optimizing the oxidation resistance of low-carbon MgO–C refractories were investigated. The results indicated that the oxidation index and rate constant of low-carbon MgO–C refractories with optimized Al₃BC₃–Al additions were 13% and 1.10 × 10⁻⁴ cm² min⁻¹ at 1400°C for 3 h, respectively, which is much lower than that of Al or Al₃BC₃ containing ones. Single Al₃BC₃ is not a suitable antioxidant for low-carbon MgO–C refractories; however, if Al₃BC₃ was initially protected and Al reacted as the antioxidant, enhanced oxidation resistance at high temperature can be achieved. The formation of dense MgO–MgAl₂O₄–Mg₃B₂O₆ layer contributed to superior oxidation resistance, and the temperature for the generation of this layer was as low as 1100°C due to liquid and vapor phase–assisted reactions with Al₃BC₃–Al. Furthermore, a self-repairing function was achieved at 1600°C with the combination of Al₃BC₃–Al additions in spite of the faster oxidation rate.     

Cyclic thermal shock resistance of h-BN composite ceramics with La2O3–Al2O3–SiO2 addition

The effects of La₂O₃–Al₂O₃–SiO₂ addition on the thermal conductivity, coefficient of thermal expansion (CTE), Young's modulus and cyclic thermal shock resistance of hot-pressed h-BN composite ceramics were investigated. The samples were heated to 1000 °C and then quenched to room temperature with 1–50 cycles, and the residual flexural strength was used to evaluate cyclic thermal shock resistance. h-BN composite ceramics containing 10 vol% La₂O₃–Al₂O₃ and 20 vol% SiO₂ addition exhibited the highest flexural strength, thermal conductivity and relatively low CTE, which were beneficial to the excellent thermal shock resistance. In addition, the viscous amorphous phase of ternary La₂O₃–Al₂O₃–SiO₂ system could accommodate and relax thermal stress contributing to the high thermal shock resistance. Therefore, the residual flexural strength still maintained the value of 234.3 MPa (86.9% of initial strength) after 50 cycles of thermal shock.     

Designing low-carbon MgO–Al2O3–La2O3–C refractories with balanced performance for ladle furnaces

In order to achieve high-quality and stable production of special steel, the performance of low-carbon MgO-C refractories needs to be further optimized. For this purpose, low-carbon MgO–Al₂O₃–La₂O₃–C refractories with enhanced thermal shock resistance and slag resistance were designed and successfully prepared by introducing Al₂O₃ as a reinforcer and La₂O₃ as a modifier. The results showed that the refractory samples with additives show better overall performance than those without additives. When 10 wt% of Al₂O₃ and La₂O₃ were added, the oxidation resistance, thermal shock resistance and slag resistance of the refractory samples coked at 1400 °C are increased by 13.57%, 17.75% and 43.09%, respectively. The analysis found that this can be mainly attributed to the formation of MgAl₂O₄, Mg₂SiO₄, and 2CaO·4La₂O₃·6SiO₂ and the consequent volume expansion effect and intergranular phase enhancement effect. Therefore, a low-cost and enforceable reinforcement strategy for low-carbon MgO-C refractories is proposed, which is expected to be applied in steelmaking.     

Effect of ZnO on the structural,physio-mechanical properties and thermal shock resistance of Li2O–Al2O3–SiO2 glass-ceramics

The composition of lithium aluminosilicate (LAS) with different zinc oxide-magnesium oxide (ZnO–MgO) contents that ranged from 0 to 1.45 wt percent (wt%) was investigated to determine the thermal shock resistance properties of the glass-ceramics. The LAS glasses were melted in an alumina crucible at 1550 °C for 5 h, and the green compact samples were then heat-treated at 1100 °C for 3.5 h. The presence of zinc oxide (ZnO) in the compositions did not change the major crystal phase of β-spodumene. However, the addition of ZnO shifted the pronounced peak to a lower angle and increased the percentage of crystallinity from 55% to 59%. Additionally, the function of ZnO in LAS glass-ceramics as the network modifier was confirmed through Fourier Transform Infrared Spectroscopy (FTIR) analysis. The physio-mechanical properties were improved when 1.45 wt% ZnO was added to the LAS glass-ceramics. The results showed increased density (2.42 g/cm³), low porosity (0.85%), high flexural strength (125.23 MPa), and low coefficient of thermal expansion (25–800 °C) (CTE_{(25–800 °C)}) value of 1.73 × 10^?6 °C^?1. Meanwhile, the thermal shock resistance properties evaluation of the LAS glass-ceramics at different ZnO contents were conducted at different thermal shock temperatures of 200 °C, 500 °C, and 800 °C. The critical temperature of the LAS specimens with 1.45 wt% ZnO demonstrated the ability to withstand a thermal shock at 800 °C while preserving 87% of their initial strength of 108.40 MPa, exemplifying the best LAS glass-ceramics properties for rapid high-temperature change applications.     

Effect of bimodal microstructure on high-temperature properties of nano-reinforced Al2O3–MgO–C refractories

The beneficial effects of adding nanostructured expandable graphite (EG) hybridized yttrium aluminium garnet (EG\YAG) powder as a composite reinforcement in improving the oxidation resistance, hot-strength, and microstructure development in Al₂O₃–MgO–C refractories were studied. The refractory components reinforced with EG\YAG exhibited more than 60% of oxidation resistance enhancement and as high as 200% increase in hot-strength performance over the standard refractories, formulated without EG\YAG. Correlating the damage parameter (D_E) calculations based on ultrasonic measurements with residual strength data (R_c, R_b) showed that there was a progressive increase in R_c and R_b values with consistent reduction in the oxidative damage of EG\YAG reinforced refractories. Analysis indicated that these beneficial features were majorly ascribed to the in-situ development of bimodal microstructure with EG\YAG sintered framework throughout the refractory interior in these new class of reinforced systems. Additionally, the mechanism of toughening and implications of these results to materials design are discussed.     

Effect of SiC nanowires on the thermal shock resistance of joint between carbon/carbon composites and Li2O–Al2O3–SiO2 glass ceramics

In order to improve the bonding property of joint between SiC modified carbon/carbon (C/C) composites and Li₂O–Al₂O₃–SiO₂ (LAS) glass ceramics, SiC nanowires were attempted as the reinforcement materials in the interface region of SiC transition layer and Li₂O–MgO–Al₂O₃–SiO₂ (LMAS) gradient joining interlayer. The C/C–LAS joint with SiC nanowire-reinforced interface layer was prepared by a three-step technique of pack cementation, in situ reaction and hot-pressing. The microstructure and thermal shock resistance of the as-prepared joints were examined. The average shear strength of the joined samples with SiC nanowires increased from 24.9 MPa to 31.6 MPa after 40 thermal cycles between 1000 °C and room temperature, while that of the joined samples without SiC nanowires dropped from 21.4 MPa to 8.3 MPa. The increase of thermal shock resistance of the C/C–LAS joints was mainly attributed to the toughening mechanism of SiC nanowires by pullout, bridging and crack deflection.     

Effects of in situ synthesis of CNTs/SiCw on microstructure and properties of Al2O3–SiC–C composites

Al₂O₃–SiC–C composites were prepared using tabular corundum, ball pitch and silicon carbide as the main raw materials. The carbon nanotubes (CNTs) and SiC whiskers (SiC_w) were in situ synthesized and their effects on the thermo–mechanical properties of Al₂O₃–SiC–C composites have been studied. The experimental results indicated that the high yield of SiC_w and CNTs with large aspect ratio could be obtained due to addition of Ni(NO₃)₂·6H₂O as catalyst in the composites. The cold modulus of rupture values were increased by 24% to 7.2 MPa, and the flexural modulus was increased from 19 GPa to 24 GPa. Additionally, the hot modulus of rupture reached a maximum value of 3.6 MPa, which presented a 71% increase over that of composites without catalyst. After three thermal shock cycles, the residual cold crush strength was improved from 57.1% to 76.9%. It is believed that the enhancement in the thermo-mechanical properties of Al₂O₃–SiC–C composites could be attributed to the reinforcement effect of SiC_w and CNTs.     

Novel synthesis and thermal property analysis of MgO–Nd2Zr2O7 composite

MgO-Nd₂Zr₂O₇composites with ratios of 50–70 vol% MgO were produced via a one-pot combustion synthesis. A suite of characterization techniques, including X-ray diffraction, scanning and transmission electron microscopy were employed to investigate the structural properties while dilatometry, simultaneous thermal analysis and laser flash analysis were used to characterize the thermal properties of the composites. Dense pellets were produced after sintering at 1400 °C with grain sizes between 200 and 500 nm for both phases. The thermal properties of the composites are similar to those produced using standard methods. The composite with 70 vol% MgO was found to have the highest thermal conductivity below 1000 °C, while above this temperature the thermal conductivity was found to be similar and independent of MgO content. This novel synthesis route produces materials which show significant improvements in homogeneity with smaller particle sizes when compared to current standard synthesis techniques without significantly reducing thermal conductivity.     

The corrosion resistance of microsilica-containing Al2O3–MgO and Al2O3–spinel castables

Microsilica addition in Al₂O₃–MgO and Al₂O₃–spinel castables helps to improve their flowability and partially accommodate their residual expansion after firing. Nevertheless, there is a lack of conclusive statements in the literature regarding the effects of microsilica on one of the main requisites for steel ladle refractories: corrosion resistance. In the present work, the performance of alumina–magnesia and alumina–spinel with or without microsilica when in contact with a steel ladle slag was evaluated based on three aspects: the material's physical properties, its chemical composition and the microstructural features before the slag attack. According to the attained results, microsilica induced liquid formation and pore growth during sintering, favoring the physical slag infiltration. Moreover, due to this liquid, CA₆ was formed in the matrix, mainly for the Al₂O₃–spinel composition, which also favored the castable dissolution into the molten slag.     

Thermodynamic calculation and microstructure characterization of spinel formation in MgO–Al2O3–C refractories

In this paper, by simulating the gas phase conditions inside the MgO–Al₂O₃–C refractories during continuous casting process and combining with thermodynamic analysis, as well as SEM analysis, the gas-gas and gas-solid formation of MA spinel were clarified in carbon containing refractories. Thermodynamic calculations showed that gas partial pressure of CO, O₂ and Mg could meet the formation and stable existence conditions of MA spinel in MgO–Al₂O₃–C refractories under service environment, and nitrogen could not affect the formation of MA spinel at 1550 °C in the thermodynamic condition. The formation processes of MA spinel were analyzed experimentally under embedding carbon atmosphere. The carbon-coated alumina powders in MgO–Al₂O₃–C refractories prevented the direct contact between magnesia and alumina. Mg gas was formed by carbon thermal reaction, then reacted with alumina (gas-solid) and gas containing aluminum (gas-gas) to generate MA spinel. Through gas-gas or gas-solid reaction, the formation of MA spinel was effectively controlled. By means of SEM analysis, a two-layer structure with dense outer spinel layer and loose inner layer was formed in MgO–Al₂O₃–C refractories.     

Cyclic thermal shock resistance for MgAlON–MgO composites obtained with additions of spent MgO–C brick: Microstructure characteristics,thermal shock parameter and thermal shock mechanism

Thermal shock parameters (R, R''', R'''' and R_st) of MgAlON–MgO composites obtained with additions of spent MgO–C brick were calculated using measured mechanical properties and thermal expansion coefficient, determining their resistance to fracture initiation and crack propagation. The cyclic thermal shock experiments of MgAlON–MgO composites performed from 1398 K to ambient temperature indicate that as number of thermal shock cycle increases, retained strength ratio of MgAlON and MgAlON–4.2 wt%MgO sharply decrease and then keep constant, while that of MgAlON–10.5 wt%MgO and MgAlON–15.7 wt%MgO slowly decrease. The reason for the difference is that MgAlON and MgAlON–4.2 wt%MgO show low value of R''' and R'''', and high value of R and R_st. Moreover, precipitation of impurity containing Fe may play a positive role in improvement of thermal shock resistance of MgAlON–MgO composites. MgAlON?4.2 wt%MgO has the maximum retained strength (55 MPa) even after 5 thermal shock cycles, which is expected to be used in the metallurgical industry.     

Effect of MgO/Al2O3 ratio on the crystallization behaviour of Li2O–MgO–Al2O3–SiO2 glass-ceramic and its wettability on Si3N4 ceramic

The composition governs the crystallization ability, the type and content of crystal phases of glass-ceramics. Glass-ceramic joining materials have generated more research interest in recent years. Here, we prepared a novel Li₂O–MgO–Al₂O₃–SiO₂ glass-ceramic for the application of joining Si₃N₄ ceramics. We investigated the influence of the MgO/Al₂O₃ composition ratio on microstructure and crystallization behaviour. The crystallization kinetics demonstrated that the glasses had excellent crystallization ability and high crystallinity. β-LiAlSi₂O₆ and Mg₂SiO₄ were precipitated from the glass-ceramics, and the increase of MgO concentration was conducive to the precipitation of Mg₂SiO₄. Among the glass-ceramic samples, the thermal expansion coefficient of LMAS2 glass-ceramic was 3.1 × 10^?6/°C, which was very close to that of Si₃N₄ ceramics. The wetting test showed that the final contact angle of the glass droplet on the Si₃N₄ ceramic surface was 32° and the interface was well bonded.     

Effect of sintering time on the microstructure and stability of Al2O3–ZrO2 composite powders under microwave-assisted sintering

The function of ceramic coating is closely related to the construction technology and the quality of ceramic powders. Generally, Al₂O₃–ZrO₂ powders are rapidly sprayed on the material surface at high temperatures to obtain better performance. Improving the quality of Al₂O₃–ZrO₂ powders can make them more widely used in ceramic coating. In this paper, microwave sintering was used to enhance the sintering process of the powders, and the effect of sintering time on the microstructure, properties, and stability of Al₂O₃–ZrO₂ powders was investigated. The results proved that microwave heating could improve the crystallinity and stability of the samples. At 900 °C, the tetragonal phase content in samples with different sintering times were 63.05%, 63.25%, 62.39%, and 63.22%, respectively. The average particle sizes obtained by Gaussian fitting are 1.04 μm, 0.83 μm, 0.88 μm, 0.86 μm, respectively. The Gaussian fitting particle size data was consistent with the normal distribution. Compared with the particle size of raw material (1.10 μm), the particles were refined, and the dispersion effect was noticeable. Therefore, the best sintering time for microwave sintering Al₂O₃ stabilized zirconia was 2 h. This paper aims to provide reasonable data support for improving the preparation of high-quality Al₂O₃-PSZ ceramic powders and to guide the industrial production of Al₂O₃-PSZ powders.