Magnetic hierarchically porous biomass carbon for realizing broadband and strong absorption of electromagnetic wave

Hierarchically porous carbon materials provide favorable conditions for electromagnetic wave loss enhancement due to the superimposed positive influence of multilevel pores. However, high production costs and complex preparation limit their large-scale production. Biomass carbon with a natural hierarchically porous structure offers an alternative; however, the impedance mismatch and single-loss mechanism prevent biomass carbon from being an ideal absorbent for broadband and strong absorption. In this study, a series of magnetic hierarchically porous biomass carbons were prepared using a facile adsorption-inert calcination method. The natural hierarchical porous structure of the loofah sponge provides numerous adsorption sites for ferric ions, which are transformed in situ into Fe₃O₄ during calcination to regulate the conductivity. The impedance matching and electromagnetic loss properties of the biomass carbon/Fe₃O₄ composites were adjusted by varying the amount of ferric nitrate. Optimal performance occurs when ferric nitrate weighs 0.8 g, and the calcination temperature is 600 °C. Under these conditions, the effective absorption bandwidth reaches 5.28 GHz (11.84–17.12 GHz, 2.5 mm), and the minimum reflection loss (RL_min) is as low as −52.54 dB (4.5 mm), which is achieved by superior impedance matching and strong conduction loss together with polarization loss due heterogeneous interfaces and carbon defects. Our work provides a new perspective and a simple method for the large-scale production of high-efficiency biomass-based electromagnetic wave absorbents.     

Cu2O@nanoporous carbon composites derived from Cu-based MOFs with ultrabroad-bandwidth electromagnetic wave absorbing performance

The application of carbon-based materials in microwave absorption (MA) field are limited due to the impedance mismatch caused by high permittivity and low permeability. In this work, Cu₂O@nanoporous carbon (Cu₂O@NPC) composites derived from Cu-based MOFs are synthesized using a simple method. Variation of C and Cu₂O contents in Cu₂O@NPC allows the regulation of permittivity and permeability, resulting in superior ultrabroad-bandwidth absorptivity. The maximum reflection loss (RL) of Cu₂O@NPC-4 is up to ?31.1 dB at 5.6 GHz, while the effective bandwidth (RL ≤ ?10 dB) can reach 7.3 GHz (10.7–18 GHz) with a matching thickness of 1.85 mm. The results of this study open a new opportunity for solving the impedance mismatch of C-based materials and obtain ultrabroad effective bandwidth.     

Enhanced microwave absorption properties of Fe-doped SiOC ceramics by the magnetic-dielectric loss properties

The combination of multiple loss characteristics is an effective approach to achieve broadband microwave wave absorption performance. The Fe-doped SiOC ceramics were synthesized by polymer derived ceramics (PDCs) method at 1500 °C, and their dielectric and magnetic properties were investigated at 2–18 GHz. The results showed that adding Fe content effectively controlled the composition and content of multiphase products (such as Fe₃Si, SiC, SiO₂ and turbostratic carbon). Meanwhile, the Fe promoted the change of the grain size. The Fe₃Si enhanced the magnetic loss, and the SiC and turbostratic carbon generated by PDCs process significantly increased the polarization and conductance loss. Besides, the magnetic particles Fe₃Si and dielectric particles SiO₂ improved the impedance matching, which was beneficial to EM wave absorption properties. Impressively, the Fe-doped SiOC ceramics (with Fe addition of 3 wt %) presented the minimum reflection coefficient (RC_min) of ?20.5 dB at 10.8 GHz with 2.8 mm. The effective absorption bandwidth (EAB, RC < ?10 dB) covered a wide frequency range from 5 GHz to 18 GHz (covered the C, X and Ku-band) when the absorbent thickness increased from 2 mm to 5 mm. Therefore, this research opens up another strategy for exploring novel SiOC ceramics to design the good EM wave-absorbing materials with broad absorption bandwidth and thin thickness.     

Dielectric and microwave absorption properties of FeSiAl/Al2O3 composites containing FeSiAl particles of different sizes

Here in, the effects of FeSiAl particle size on the dielectric and microwave absorption properties of FeSiAl/Al₂O₃ composites were studied. FeSiAl/Al₂O₃ composites containing 18–25 μm, 25–48 μm, and 48–75 μm FeSiAl particles were prepared by hot-pressed sintering based on uniformly mixed FeSiAl and Al₂O₃ powders. Results show that the real permittivity and the imaginary permittivity are significantly promoted with increasing FeSiAl particle size, which is ascribed to the enhanced interfacial polarization and conductance loss. In addition, the favorable matching impedance and suitable attenuation coefficient enabled the composite containing 25–48 μm FeSiAl powder to show a minimum reflection loss of ?34.4 dB at 11.7 GHz and an effective absorption bandwidth (<-10 dB) of 1.4 GHz in 11.0–12.4 GHz, when the thickness is 1.1 mm. By adjusting the thickness to 1.4 mm, the effective absorption bandwidth of the composite reaches a maximum value of 2.0 GHz in the 8.3–10.3 GHz range, indicating tunable, strong, and highly efficient microwave absorption performance.     

Assembled porous Fe3O4@g-C3N4 hybrid nanocomposites with multiple interface polarization for stable microwave absorption

Magnetic/dielectric composites can offer good electromagnetic impendence. However, the strategy for embodying strong absorbing ability and broad effective absorption band simultaneously is a significant challenge. Therefore, assembled porous Fe₃O₄@g-C₃N₄ hybrid nanocomposites have been designed and synthesized, in which porous Fe₃O₄ nanospheres assembled by ~ 3?nm Fe₃O₄ nanoparticles are surrounded by g-C₃N₄. The introduction of g-C₃N₄ improves dielectric loss ability at 2–18?GHz and magnetic loss ability at 2–10?GHz, and enhances attenuation constant, and increases electromagnetic impedance degree. These merits ensure that assembled porous Fe₃O₄/g-C₃N₄ hybrid nanocomposites deliver superior microwave absorption performance, such as effective absorption bandwidth, f_E, (reflection loss less ??10?dB) exceeding 5?GHz at 2.0–2.3?mm, the maximal f_E of 5.76?GHz and minimal reflection loss of at least ??20?dB with thickness ranging from 2.3 to 10.0?mm, avoiding the sensitivity of absorption properties to absorbing layer thickness. Stable microwave absorbing performance originates from multi-interfacial polarization, multi-reflection, enhanced electromagnetic loss capability, and good electromagnetic impedance. Our study offers a new idea for stable microwave absorber at 2–18?GHz.     

Bimetallic sulfides embedded into porous carbon composites with tunable magneto-dielectric properties for lightweight biomass- reinforced microwave absorber

Currently, biomass-derived porous carbon materials have great potential for the development of advanced microwave absorbing materials (MAMs) with lightweight, high performance, wide effective bandwidth (EAB), and thin matching thickness. Herein, we reported low-cost, high-performance MAMs for the successful anchoring of Cu-based bimetallic sulfides CuCo₂S₄@CoS₂ on biomass porous carbon (BPC) derived from pistachio shells using a simple carbonization, hydrothermal, and electrostatic self-assembly method. The results demonstrate that the prepared BPC@CuCo₂S₄@CoS₂ composite exhibits excellent microwave absorption due to its balanced impedance matching and the combined effect of conductive loss, dipole polarization, interfacial polarization, dielectric loss, and magnetic loss. To be precise, the minimum reflection loss (RL_min) of BPC@CuCo₂S₄@CoS₂ reaches −64.2 dB at a packing load of 20 wt%, with an EAB of 6.6 GHz and a thickness of 2.3 mm. This work provides new insights into the study of copper-based bimetallic sulfide and BPC composites in MAMs.     

Microwave-Assisted Synthesis of the Flexible Iron-based MIL-88B Metal–Organic Framework for Advanced Energetic Systems

The 3D metal–organic framework (MOF), MIL-88B, built from the trivalent metal ions and the ditopic 1,4-Benzene dicarboxylic acid linker (H₂BDC), distinguishes itself from the other MOFs for its flexibility and high thermal stability. MIL-88B was synthesized by a rapid microwave-assisted solvothermal method at high power (850 W). The iron-based MIL-88B [Fe₃.O.Cl.(O₂C–C₆H₄–CO₂)₃] exposed oxygen and iron content of 29% and 24%, respectively, which offers unique properties as an oxygen-rich catalyst for energetic systems. Upon dispersion in an organic solvent and integration into ammonium perchlorate (AP) (the universal oxidizer for energetic systems), the dispersion of the MOF particles into the AP energetic matrix was uniform (investigated via elemental mapping using an EDX detector). Therefore, MIL-88B(Fe) could probe AP decomposition with the exclusive formation of mono-dispersed Fe₂O₃ nanocatalyst during the AP decomposition. The evolved nanocatalyst can offer superior combustion characteristics. XRD pattern for the MIL-88B(Fe) framework TGA residuals confirmed the formation of α-Fe₂O₃ nanocatalyst as a final product. The catalytic efficiency of MIL-88B(Fe) on AP thermal behavior was assessed via DSC and TGA. AP solely demonstrated a decomposition enthalpy of 733 J g^?1, while AP/MIL-88B(Fe) showed a 66% higher decomposition enthalpy of 1218 J g^?1; the main exothermic decomposition temperature was decreased by 71 °C. Besides, MIL-88B(Fe) resulted in a decrease in AP decomposition activation energy by 23% and 25% using Kissinger and Kissinger–Akahira–Sunose (KAS) models, respectively.

     

Apium-derived biochar loaded with MnFe2O4@C for excellent low frequency electromagnetic wave absorption

Given the rapid development of electrommunication and radar detection technologies, low frequency electromagnetic wave materials have received more and more attention. Herein, the Apium-derived biochar loaded with MnFe₂O₄@C has been successfully prepared by using co-solvothermal and calcination method. The cladding carbon layer on MnFe₂O₄ NPs is migrated from biochar via thermal diffusion, and the biochar is covered with the ferrite NPs as well. Thus, the combination of dielectric and magnetic loss endows the composite with excellent low frequency electromagnetic absorption ability i.e. the optimal microwave absorbing intensity is −48.92  dB at 0.78 GHz with an extended effective absorbing bandwidth of 0.38–1.78 GHz for only 2.5 mm thickness, being ascribed to nature resonance, multiple interfacial and surface polarization, strong electromagnetic attenuation ability and good impedance matching property in detail. This bio-based ferrite composites have great potential in preparation of MAMs due to the advantages of extraordinary performance, lightweight property, environmental protection and easy degradation.     

Tunable microwave absorption performance of carbon fiber-reinforced reaction bonded silicon nitride composites

The hybrid network of Si₃N₄ whiskers and conducting carbon fiber has great potential for microwave absoprtion applications. The high electrical conductivity of the carbon fiber helps to transform the microwave transparent Si₃N₄ into microwave absorbing materials. Herein, the microwave absorption performance of 5–20 vol % of carbon fiber reinforced reaction bonded Si₃N₄ (C_f-RBSN) composites have been discussed in detail. The C_f reinforcement tuned the X-band dielectric properties of the RBSN composites. The 5 vol % C_f-RBSN composite exhibit a minimum reflection loss (RL_min) of ?36.16 dB (99.998% microwave absorption) at 11.89 GHz and a high specific reflection loss of 920 dB. g^?1 for 5.9 mm thickness, while 20 vol % C_f-RBSN composites resulted in RL_min of ?22.86 dB at 11.56 GHz with a low thickness of 1.5 mm. Thus, the superior microwave absorption performance of the prepared lightweight composites results from the multiple interfacial polarization, dipole polarization, and conduction loss due to the 3D network of interconnected Si₃N₄ whiskers and C_f.     

Fabrication of Nd-doped Ni–Zn ferrite/multi-walled carbon nanotubes composites with effective microwave absorption properties

The electromagnetic materials are featured by good magnetic permeability and dielectric constant characteristics, which are of significant importance in solving the pollution problem of electromagnetic. In this study, after the complete of the use of sol-gel method, argon gas was then introduced for calcination, and eventually a new type of MWCNTs/Ni_0.5Zn_0.5Nd_0.04Fe_1.96O₄ composites was synthesized after the above mentioned procedures. The synthesized MWCNTs were able to be adsorbed on the surface of Ni_0.5Zn_0.5Nd_0.04Fe_1.96O₄ and could form a good conductive work of 3D. Also, the effect of additional MWCNTs on microwave absorption properties of MWCNTs/Ni_0.5Zn_0.5Nd_0.04Fe_1.96O₄ composites were also observed in this study. The results indicate that the additional MWCNTs function to significantly improve the microwave absorption property of MWCNTs/Ni_0.5Zn_0.5Nd_0.04Fe_1.96O₄. Through altering the amount of MWCNTs, the microwave attenuation performance and impedance matching coefficient of this electromagnetic materials can be effectively improved. The S2 sample presented a minimum reflection loss of ?35.05 dB when its thickness reached 1.6 mm, meanwhile, the effective absorption bandwidth achieved 4.55 GHz. The prepared composites perform well in microwave absorption, which can attribute to the reasonable ratio of composites as well as its interaction with both of the magnetic and dielectric components. This research paved the way for novel ideas to be put in the electromagnetic absorption materials with high-efficient.     

Facile synthesis of La-doped cobalt ferrite@glucose-based carbon composite as effective multiband microwave absorber

C/CoLa_xFe_2−xO₄ (with x = 0.1, 0.2, 0.3) composites were compounded by using a high-temperature hydrolysis. X-ray Diffraction (XRD) and X-ray Photoelectron Spectroscopy (XPS) results show that doping of La ions does not alter the spinel crystal structure and partially replaces Fe ions. Results of Field-Emission Scanning Electron Microscope (FESEM) and Energy Dispersive Spectroscopy (EDS) mapping prove that with the doping of La ions, the grains are refined, and the carbon shell on the surface exists. The effect of doping of La ions on microwave absorption performance of the composites was systematically studied. It is found that an optimal reflection loss (RL) of −49.56 dB is achieved at 4.96 GHz, as the composition is C/CoLa_0.2Fe_1.8O₄. Meanwhile, the sample C/CoLa_0.3Fe_1.7O₄ shows excellent effective absorption bandwidth. Specifically, when the matching thicknesses are 4 and 5 mm, the effective absorption bandwidth is 4 GHz, covering the C band and Ku band, thus realizing multiband absorption. The synergistic effects of the enhanced dipole polarization related to the doping of La ions, improved interface polarization of the core-shell structure, and the magnetic loss originated from CoLa_xFe_2−xO₄ are responsible for the optimal microwave absorption performance. Therefore, this C/CoLa_xFe_2−xO₄ composite material has the prospect of a multiband high-efficiency microwave absorber.     

Comparative study of microwave absorption properties of Ni–Zn ferrites obtained from different synthesis technologies

Spinel ferrites are widely used for electromagnetic wave (EMW) absorption applications. In this study, spinel Ni–Zn ferrites with excellent microwave absorption properties were synthesized. Their EMW absorption characteristics and interaction mechanisms were studied to lay the foundation for the study of the role of Ni–Zn ferrite as a magnetic substrate for composites. Herein, Ni_0·5Zn_0·5Fe₂O₄ was prepared by the hydrothermal method (H-NZFO) and the sol–gel auto-combustion method (S-NZFO); both samples exhibited distinct microwave absorption properties. The S-NZFO absorber (thickness = 3.72 mm) demonstrated the best dual-zone microwave absorption with two strong reflection loss peaks at 5.1 and 10.5 GHz. The corresponding effective absorption bandwidth (EAB) reached 9.0 GHz, which covered part of the S-band and all of the C- and X-bands. These results were attributed to the high saturation magnetization, outstanding complex permeability, and multiple magnetic loss channels of S-NZFO. The H-NZFO sample exhibited excellent absorption capability and matching thickness. At a thickness as low as 1.71 mm, the minimum reflection loss (RL_min) of the H-NZFO absorber reached -60.2 dB at 13.1 GHz. The maximum bandwidth corresponding to RL below -10 dB was 4.6 GHz. These results can be attributed to small particle size, high complex permittivity, and multiple dielectric loss channels of H-NZFO. The observed wide effective absorption bandwidth of S-NZFO and strong microwave absorption capability of H-NZFO suggest the potential of both materials as substrates for efficient microwave absorbers in military as well as civilian absorption applications.     

Self-supported construction of three-dimensional NiCo2O4 hierarchical nanoneedles for high-performance microwave absorption

Grafting one-dimensional (1D) structure onto three-dimensional (3D) carbon foam is a practical and novel protocol to improve its microwave attenuation capability. Herein, a unique microwave absorber with NiCo₂O₄ nanoneedle grew on carbon foam (NCOCF) has been built via a combined approach of carbonization and hydrothermal treatment. The obtained NCOCF exhibit good impedance matching and excellent attenuation capability, which means that the microwave energy can be dissipated through conductive loss, interfacial polarization and multiple-scattering. These advantages result in the effective transformation of microwave energy to heat, thus yielding a remarkable microwave adsorption (with a thickness of 2.8 mm, the maximum reflection loss (RL_max) is −63.6 dB, and the effective absorption bandwidth (E_AB) is as wide as 4.72 GHz with a thickness of 1.3 mm). The study would offer a strategy for development of the high-performance microwave absorber.     

Design of magnetic triple-shell hollow structural Fe3O4/FeCo/C composite microspheres with broad bandwidth and excellent electromagnetic wave absorption performance

A three-step strategy combining solvothermal and liquid phase reduction method had been developed for preparation of magnetic triple-shell hollow structural Fe₃O₄/FeCo/C (TSH–Fe₃O₄/FeCo/C) composite microspheres. FeCo was used to enhance electromagnetic (EM) wave absorption in different frequency band and broaden effective absorbing bandwidth, while carbon was used to improve impedance matching. Triple-shell hollow structure was designed to enrich the multiple interfaces to favor the interfacial polarization, increase the multiple reflections and scattering, and provide physicochemical protection to Fe₃O₄ core from oxidation. The microstructure and morphology of TSH-Fe₃O₄/FeCo/C composite microspheres were characterized by TEM, XRD and Raman in detail. The results indicated that magnetic Fe₃O₄ was completely covered by FeCo and carbon via layer by layer. As an EM wave absorber, the maximum reflection loss of TSH-Fe₃O₄/FeCo/C composite microspheres was up to -37.4 dB due to better normalized characteristic impedance at a thickness of 2.2 mm and the bandwidth less than -10 dB even reached up to 5.9 GHz. The excellent EM wave absorption performance was attributed to the combination of shell materials (Fe₃O₄, FeCo and carbon) and unique triple-shell hollow structure, which lead to multiple relaxation processes and good impedance matching. Consequently, this work would contribute to the design and preparation of high performance EM wave absorbent with outstanding absorbing property and wider absorption range.     

Enhanced electromagnetic wave absorption performance of SiCN(Fe) fibers by in-situ generated Fe3Si and CNTs

The SiCN(Fe) fibers with excellent one-dimensional microstructure and electromagnetic wave (EMW) absorption performance were synthesized by combining polymer-derived ceramics (PDCs) method and electrospinning. The in-situ generation of Fe₃Si and CNTs by adding ferric acetylacetonate (FA) into the raw materials effectively improved the dielectric properties, magnetic properties and the impedance matching performance of the SiCN(Fe) fibers. The EMW absorption performance of SiCN(Fe) fibers were mainly based on dipole polarization loss, interface polarization loss and eddy current loss. The RL_min value of SiCN(Fe) fibers reached ?47.64 dB at 1.38 mm and the effective absorption band (EAB, RL ≤ ?10 dB) reached 4.28 GHz (13.72–18 GHz, 1.35 mm).     

Extended effective absorption bandwidth of Sendust/phosphate flaky particles by TiO2 insulation coating

How to obtain a wide effective absorption bandwidth is still a challenge for Sendust micro-powder as microwave absorber at 2–10 GHz range. Double shell-core structured composites are desirable to extend effective absorption bandwidth through optimizing impedance match degree in wider frequency and forming a broad dielectric loss peak. In this work, TiO₂ layer is fabricated on surface of flaky Sendust/phosphate composites through the hydrolysis reaction for constructing double shell-core structured TiO₂@phosphate@Sendust flaky composites. The synergistic effect of TiO₂-phosphate interface and phosphate-Sendust interface induces a broad peak for dielectric loss, microwave absorption ratio and attenuation constant, resulting in wider effective absorption bandwidth of 3.2 GHz compared with that (2.4 GHz) of raw Sendust/phosphate composites. This work offers a facile and effective strategy for extending effective absorption bandwidth of micron-scale microwave absorber.     

Electromagnetic and microwave absorption properties of FeSiAl and flaky graphite filled Al2O3 composites with different FeSiAl particle size

The increasing electromagnetic interference problems have drawn much attention to microwave absorbing materials. To satisfy the needs of practical application, FeSiAl and flaky graphite filled Al₂O₃ composites were sintered by hot-pressing for microwave absorption application. The effect of FeSiAl particle size on the electromagnetic and microwave absorption properties was investigated in the X-band (8.2–12.4 GHz). The results show that the dielectric properties enhance significantly with increasing FeSiAl particle size, which is attributed to the increased interfacial polarization and conductance loss. As a result of the favorable impedance matching and appropriate electromagnetic attenuation, the reflection loss (RL) of the composites filled with 25–48 μm flaky FeSiAl achieves -15.2 dB at 10.6 GHz and the effective absorption bandwidth (RL < -10 dB) is 1.2 GHz in 10.0–11.2 GHz with a matching thickness of 1.0 mm. It indicates that FeSiAl and flaky graphite filled Al₂O₃ composites are potential candidates for thin-thickness microwave absorbing materials, and the microwave absorption properties can be enhanced by adjusting absorbent particle size.     

Rhombic Fe2O3 lumps doping hollow ZnFe2O4 spheres through oxidative decomposition process implanted into graphene conductive network with superior electromagnetic wave absorption properties

Conductor-dielectric-magnetic multicomponent coordination composites with rhombic Fe₂O₃ lumps doping hollow ZnFe₂O₄ spheres through oxidative decomposition process implanted into graphene conductive network (hollow ZnFe₂O₄ spheres/rhombic Fe₂O₃ lumps/rGO composites) were successfully constructed by a facile method. The countless hollow ZnFe₂O₄ spheres were compactly attached to the curled-paper rGO and larger sized-rhombic Fe₂O₃ lumps were relatively dispersed. Among, the hollow structure of ZnFe₂O₄ spheres could attenuate the electromagnetic wave by multiple reflections and scatterings. Intriguingly, hollow ZnFe₂O₄ spheres reacted with GO to form intermediate rhombic Fe₂O₃ lump products, which ameliorated the hetero-interfaces structure and helped to improve impedance matching by weakening the strong magnetic ZnFe₂O₄ (M_s = 91.2 emu/g) and high conductive rGO after the introduction of weakly magnetic Fe₂O₃ semiconductor. Moreover, all three components could induce dielectric polarization losses, such as multilayer or dipole polarization. Therefore, the maximum absorption of ternary composites was up to ?64.3 dB at 7 GHz and 3.4 mm, simultaneously, and a bandwidth exceeding ?10 dB was 4.2 GHz at 1.7 mm. Meanwhile, with a thin thickness range of 1.5–5 mm, the absorption bandwidth below ?10 dB was from 2 to 18 GHz which occupied for 91.5% of whole study frequency range. These results provided a new approach and reference for the design and property regulation of electromagnetic materials at electronic communications, aerospace and military radar flied.     

Investigation on microwave absorption characteristics of ternary MWCNTs/CoFe2O4/FeCo nanocomposite coated with conductive PEDOT-Polyaniline Co-polymers

In this study, ternary MWCNTs/CoFe₂O₄/FeCo nanocomposite coated with conductive PEDOT-polyaniline (PA@MW/F/C) co-polymers were synthesized by microwave-assisted sol-gel followed in-situ polymerization methods. The phases, crystal structures, morphologies, magnetic and electromagnetic features of the as-prepared samples were identified via XRD, SEM, XPS, VSM, and VNA respectively. Absorption characteristics were investigated in the frequency (12–18 GHz) Ku band. XRD, VSM and SEM analysis confirmed the partial reduction process of CoFe₂O₄ and successfully decorated magneto-dielectric particles with co-polymers. By measuring electromagnetic features of the samples, it was found that coating magneto-dielectric particles with conductive co-polymers improved the permittivity and dielectric constant, accordingly affecting the impedance matching characteristic and attenuation constant performance. Moreover, exchange coupling behavior was found significant impacts on the microwave absorption properties. PA@MW/F/C coated nanocomposite revealed the maximum reflection loss of ?90 dB at 13.8 GHz with 4 GHz effective bandwidth and 1.5 mm thickness. Due to the enhanced interfacial polarization, impedance matching and exchange coupling effects of the as-prepared nanocomposite, it owns excellent microwave absorption properties, which can be applied as an absorber with distinguishing features (strong absorption, thin thickness, and broadest effective bandwidth).     

Controllable dielectric properties and strong electromagnetic wave absorption properties of SiC/spherical graphite-AlN microwave-attenuating composite ceramics

Fully dense SiC/spherical graphite-AlN microwave-attenuating composite ceramics were manufactured via hot-pressing sintering, in which, apart from the primary SG (spherical graphite) attenuating agent, 5–30 wt% semiconductive α-SiC was employed as the second attenuating agent. The incorporation of SiC contributed to a slightly decreasing electrical conductivity and enhanced polarization relaxation. Controllable complex permittivities were obtained, namely, both the real and imaginary permittivities exhibit first a decrease and then an increase with the SiC addition, and which delivers an optimized impedance matching of the composites. RL_min values below ?10 dB (more than 90% absorption) were achieved by all the composites containing 5–20 wt% SiC with the sample thickness of 1–1.4 mm, and the absorption performance characteristics were significantly tunable by controlling the of SiC content at 8.2–12.4 GHz. Impressively, a superior reflection loss of ?46 dB (1.1 mm) and wide effective absorption bandwidth of 2.1 GHz were achieved at a 5 wt% SiC content, respectively, rendering SiC/SG–AlN composites a potential ultra-thin and highly efficient microwave-attenuating ceramic candidate.