Microstructure and ablation behaviour of a strong,dense, and thick interfacial ZrxHf1-xC/SiC multiphase bilayer coating prepared by a new simple one-step method

In order to solve the shortcomings of chemical vapour deposition (CVD), such as CVD-prepared coatings that are weakly bound to the carbon base, Zr_xHf_1-xC/SiC multiphase bilayer ceramic coatings were prepared on substrate surfaces by slurry brushing and the one-step in-situ thermal evaporation reaction method. The coating exhibits multiphase bilayer characteristics due to the self-diffusion of the matrix carbon source and the self-assembly of gaseous Zr and Si with the matrix. The 200-μm-thick Zr_xHf_1-xC solid-solution phase is distributed on the outer coating layer, while the 100-μm-thick SiC phase is distributed in the inner layer such that it contacts the substrate. The coating prepared by brushing with Hf and vapour-deposited with a masterbatch containing 7:3 (w/w) Zr:Si (H-ST) exhibits excellent ablation resistance, attributable to the presence of dense and spallation-free oxide scale and the low oxygen diffusion coefficient of (Zr, Hf)C_yO_z.     

Characterizing Hf X Zr1−X O2 by EXAFS: Relationship Between Bulk and Surface Composition, and Impact on Catalytic Selectivity for Alcohol Conversion

A series of mixed Hf _X Zr_1?X O₂ oxide catalysts was prepared according to a recipe that yields the monoclinic structure. The samples were examined by EXAFS spectroscopy at the Zr K and Hf L_III edges. A fitting model was used that simultaneously fits data from both edges, and makes use of an interdependent mixing parameter X _mix to take into account substitution of the complementary atom in the nearest metal-metal shell. For XPS analysis, Scofield factors were applied to estimate the relative atomic surface concentrations of Zr and Hf. EXAFS results suggested that a solid bulk solution was formed over a wide range of X for Hf _X Zr_1?X O₂ binary oxides, and that the relative ratio was retained in the surface shell (i.e., including some subsurface layers by XPS) and the surface (e.g., by ISS). The increase in selectivity for the 1-alkene from dehydration of alcohols at high Zr content does not correlate smoothly with the tuned relative atomic concentration of Hf to Zr. The step change at high Zr content appears to be due to other indirect factors (e.g., surface defects, oxygen vacancies).     

Valence state of europium and samarium in Ln2Hf2O7 (Ln = Eu,Sm) based oxygen ion conductors

Ln₂(Hf_2-xLn_x)O_7-x/2 (Ln = Sm, Eu; x = 0.1) pyrochlores have been prepared via mechanical activation of oxide mixtures, followed by heat treatment for 4h at 1450 and 1600 °C, respectively. According to the ESR data, the Eu cations on the Hf site in the Hf_1-xEu_xO₆ octahedra in pyrochlore Eu₂(Hf_2-xEu_x)O_7-x/2 (x = 0.1) are most readily oxidized and reduced. Oxidation at 840 °C for 24h in air reduces the total conductivity of the Ln₂(Hf_2-xLn_x)O_7-x/2 (Ln = Sm, Eu; x = 0.1) by a factor of 2.5–6, due to the decrease in the concentrations of oxygen vacancies and Ln²⁺ ions as a result of the oxidation. The anomalous low-frequency behavior of the permittivity of the Eu₂(Hf_2-xEu_x)O_7-x/2 (x = 0.1) at ~800 °C can be understood in terms of the changes in the oxygen sublattice of the pyrochlore structure as a result of the oxidation of divalent europium and partial filling of oxygen vacancies at this temperature.     

B-site acceptor doped AgNbO3 lead-free antiferroelectric ceramics: The role of dopant on microstructure and breakdown strength

B-site aliovalent modification of AgNbO₃ with a nominal composition of Ag(Nb_1-xM_x)O_3-x/2 (x = 0.01, M = Ti, Zr and Hf) was prepared. The effects of dopants on microstructure, dielectric, ferroelectric and conduction properties were investigated. The results indicate that the introduction of acceptor dopant does not lead to grain coarsening. Zr⁴⁺ and Hf⁴⁺ doping are beneficial to stabilize the antiferroelectric phase of AgNbO₃. Among all the samples, Ti⁴⁺ doped AgNbO₃ has the minimum resistivity while Hf⁴⁺ doped AgNbO₃ has the maximum resistivity, therefore, Hf⁴⁺ doped AgNbO₃ has high BDS. The XPS results indicate that the conduction behaviour is associated with the concentration of oxygen vacancies. This work hints that acceptor dopant is also effective on the microstructure control and chemical modification of AgNbO₃-based ceramics.     

Microstructure and ablation performance of HfC/PyC core-shell structure nanowire-reinforced Hf1-xZrxC coating

To improve the ablation performance of C/C composites, HfC/PyC core-shell structure nanowire (HfCnw/PyC)-reinforced Hf_1-xZr_xC coating was prepared via three-step chemical vapor deposition (CVD) method. Effects of HfCnw/PyC and PyC layer thickness on the microstructure, residual stress and ablation performance of Hf_1-xZr_xC coating were studied. HfCnw/PyC-reinforced coatings exhibited equiaxial crystal structure. After incorporating HfCnw/PyC, ablation property of Hf_1-xZr_xC coating was enhanced because of the skeleton role of HfO₂ nanowires. PyC possessed low coefficient of thermal expansion (CTE) and high heat conductivity, but poor ablation performance. Hence, with the increase in thickness of PyC layer, ablation property of the coating first increased and then decreased. HfCnw/PyC-reinforced Hf_1-xZr_xC coating with PyC layer thickness of about 50 nm exhibited the best ablation property.     

Effects of HfC/PyC core-shell structure nanowires on the microstructure and mechanical properties of Hf1-xZrxC coating

To elevate the mechanical and anti-ablation properties of Hf_1-xZr_xC coating on C/C composites, HfC/PyC core-shell structure nanowires (HfCnw/PyC) with different PyC layer thickness were synthesized by two steps of CVD. Influences of HfCnw/PyC on the microstructure and mechanical properties of Hf_1-xZr_xC coating were researched. Toughening mechanism of HfCnw/PyC was also investigated. PyC layer exhibited a lamellar structure and combined well with HfCnw. After incorporating HfCnw/PyC, Hf_1-xZr_xC coating structure converted from columnar crystal to isometric crystal. HfCnw improved H, E, K_c and bonding strength of Hf_1-xZr_xC coating, which is ascribed to the nanowire pullout, debonding, bridging and crack deflection mechanism. With the PyC layer thickness increasing, H and E of the coating reduced, K_c and bonding strength of the coating increased. Because of the moderate bonding strength between HfCnw/PyC and coating matrix, lamellar structure of PyC layer and higher K_c of PyC, toughening effectiveness of the core-shell structures gradually enhanced with the PyC layer thickness increasing.     

Influence of Zr/Ti atomic ratio and seed layer on the magnetoelectric coupling of Pb(ZrxTi1−x)O3 film-on-CoFe2O4 bulk ceramic composites

Lead zirconate titanate Pb(Zr_xTi_1−x)O₃ films with various Zr/Ti ratios of 20/80, 40/60, 52/48, 60/40 and 80/20 are deposited on highly dense CoFe₂O₄ ceramics using a simple chemical solution deposition. All Pb(Zr_xTi_1−x)O₃ films are polycrystalline and have no preferential orientations. The dielectric, ferroelectric, piezoelectric and magnetoelectric properties strongly depend on the Zr/Ti ratio. And the Pb(Zr_xTi_1−x)O₃ films with a Zr/Ti ratio close to morphotropic phase boundary exhibit best properties, whose magnetoelectric coefficient is over 1.5 times larger than those of other Zr/Ti ratios. The introduction of a PbO seeding layer between the Pb(Zr_0.52Ti_0.48)O₃ films and CoFe₂O₄ substrates facilitates the (100)-texture. Therefore, the magnetoelectric coefficient was enhanced by 1.5 times. The further improvement of the magnetoelectric coupling could be anticipated by fabricating Pb(Zr_0.52Ti_0.48)O₃ films with more or absolute (100)-texture and using conductive interfacial layer between two phases.     

Design of Efficient Ce<Subscript>x</Subscript>M<Subscript>1−x</Subscript>O<Subscript>2−δ</Subscript> (M = Zr,Hf, Tb and Pr) Nanosized Model Solid Solutions for CO Oxidation

Abstract  

Nanosized Ce_xM_1−xO_2−δ (M = Zr, Hf, Tb and Pr) solid solutions were prepared by a modified coprecipitation method and thermally treated at different temperatures from 773 to 1073 K in order to ascertain the thermal behavior. The structural and textural properties of the synthesized samples were investigated by means of X-ray diffraction (XRD), high resolution transmission electron microscopy (HRTEM), BET surface area, X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy (RS) techniques. The catalytic efficiency has been performed towards oxygen storage/release capacity (OSC) and CO oxidation activity. The characterization results indicated that the obtained solid solutions exhibit defective cubic fluorite structure. The solid solutions of ceria–hafnia, ceria–terbia and ceria–praseodymium exhibited good thermal stability up to 1073 K. A new Ce_0.6Zr_0.4O₂ phase along with Ce_0.75Zr_0.25O₂ was observed in the case of ceria–zirconia solid solution due to more Zr⁴⁺ incorporation in the ceria lattice at higher calcination temperatures. The reducibility of ceria has been increased upon doping with Zr⁴⁺, Hf⁴⁺, Tb^3+/4+ and Pr^3+/4+ cations. This enhancement is more in case of Hf⁴⁺ doped ceria. Among various solid solutions investigated, the ceria–hafnia combination exhibited better OSC and CO oxidation activity. The high efficiency of Ce–Hf solid solution was correlated with its superior bulk oxygen mobility and other physicochemical characteristics.     

Effects of oxygen sources on properties of atomic-layer-deposited ferroelectric hafnium zirconium oxide thin films

Orthorhombic Hf_xZr_1-xO₂ (HZO) is a promising ferroelectric material for realizing ferroelectric devices in the modern semiconductor industry because of its excellent CMOS compatibility and scalability. Atomic layer deposition (ALD) facilitates the growth of robust ferroelectric HZO films that can be used in nanoelectronic devices. Herein, we provide a comprehensive understanding of the effects of the oxygen source, either H₂O or O₃, on the properties of ALD-grown HZO films. Although the growth per cycle promoted by ALD does not change with the type of oxygen source, the impurity content of the HZO film grown with H₂O are higher than that with O₃. The low impurity content of the HZO film grown with O₃ results in low leakage current. The ALD process with O₃ further suppresses the emergence of the nonferroelectric monoclinic phase in the ferroelectric orthorhombic HZO matrix. Consequently, the HZO film grown with O₃ exhibits a small coercive field for ferroelectric domain switching and high electrical reliability. This study demonstrates that O₃ is more favorable for growing high-quality HZO films via ALD by using metal precursors comprising tetrakis(ethylmethylamino) ligands.     

Oxyacetylene ablation of (Hf0.2Ti0.2Zr0.2Ta0.2Nb0.2)C at 1350 − 2050 °C

Ablation resistance of a multi-component carbide (Hf_0.2Ti_0.2Zr_0.2Ta_0.2Nb_0.2)C (HTZTNC) was investigated using an oxyacetylene flame apparatus. When the surface temperature of the HTZTNC was below 1800 °C, (Nb, Ta)₂O₅, (Hf, Zr)TiO₄, and (Hf, Zr)O₂ were found to be the main oxidation products, while at higher temperature, formation of (Hf, Zr, Ti, Ta, Nb)O_x was favored and its content gradually increased with the increase in ablation temperature. Based on the ablation results and thermodynamic simulation analysis, a possible ablation mechanism of HTZTNC was proposed. Active oxidation of TiC and outward diffusion of TiO were demonstrated to occur during the ablation process, which constitute the critical steps for the ablation of HTZTNC. These results can contribute to the design of ablation resistant ultra-high-temperature ceramics.     

Tuning of dielectric properties in Ti-Doped granular HfO2 nanoparticles for high-k applications

An array of titanium (Ti) doped HfO₂ [(Hf_1-xTi_xO₂) (x = 0.0–1.0)] nanoparticles (NPs) synthesis and the study of their structural, spectroscopic, and dielectric properties is reported. The Hf_1-xTi_xO₂ NPs were synthesized by a sol-gel type wet chemical process. The crystal structure of pure HfO₂ and TiO₂ NPs revealed by structural analysis is monoclinic (m) and tetragonal (t), respectively. The crystallinity of the doped samples was found to be dopant concentration-dependent. The microstructure of the obtained NPs was investigated along with their spectroscopic and dielectric characteristics. The tunable dielectric properties of Hf_1-xTi_xO₂ NPs make them ideal for high frequency, high-k applications.     

Metalorganic chemical vapor deposition of ferroelectric Pb(ZrxTi1- xO3thin films

Ferroelectric Pb(Zr_xTi_1-x)O₃ (PZT) thin films were successfully deposited on Pt/Ti/SiO₂Si substrates by metalorganic chemical vapor deposition (MOCVD). Pb(C₂H₅)₄, Zr(O-t-C₄H₉)₄, and Ti(O-i-C₃H₇)₄ were used as metalorganic precursors. Variations in crystalline structure, surface morphology, and grain size of deposited films were systematically investigated as a function of process parameters by using X-ray diffraction and scanning electron microscopy. The deposition temperature and gas composition in the reactor are the main parameters that control the microstructure and composition of films. An interrelationship between the grain orientation and surface roughness of the films was found. Films with (111) preferred orientation are significantly smoother than films with other preferred orientations. The ferroelectric properties of the films were also measured by RT66A ferroelectric tester for hysteresis loop and fatigue property. Electrical measurements revealed that the films had good ferroelectric characteristics with the high remanant polarization (32 μC/cm₂) and low coercive voltage (1.1 V).     

Au/Ce1−xZrxO2 as effective catalysts for low-temperature CO oxidation

The physico-chemical properties and activity of Ce-Zr mixed oxides, CeO₂ and ZrO₂ in CO oxidation have been studied considering both their usefulness as supports for Au nanoparticles and their contribution to the reaction. A series of Ce_1−xZr_xO₂ (x = 0, 0.25, 0.5, 0.75, 1) oxides has been prepared by sol–gel like method and tested in CO oxidation. Highly uniform, nanosized, Ce-Zr solid solutions were obtained. The activity of mixed oxides in CO oxidation was found to be dependent on Ce/Zr molar ratio and related to their reducibility and/or oxygen mobility. CeO₂ and Ce_0.75Zr_0.25O₂, characterized by the cubic crystalline phase show the highest activity in CO oxidation. It suggests that the presence of a cubic crystalline phase in Ce-Zr solid solution improves its catalytic activity in CO oxidation. The relation between the physico-chemical properties of the supports and the catalytic performance of Au/Ce_1−xZr_xO₂ catalysts in CO oxidation reaction has been investigated. Gold was deposited by the direct anionic exchange (DAE) method. The role of the support in the creation of catalytic performance of supported Au nanoparticles in CO oxidation was significant. A direct correlation between activity and catalysts reducibility was observed. Ceria, which is susceptible to the reduction at the lowest temperature, in the presence of highly dispersed Au nanoparticles, appears to be responsible for the activity of the studied catalysts. CeO₂-ZrO₂ mixed oxides are promising supports for Au nanoparticles in CO oxidation whose activity is found to be dependent on Ce/Zr molar ratio.     

Solid-state reactive sintering of La2-xGdxZr2O7 transparent ceramics and their optical properties

Transparent polycrystalline La_2-xGd_xZr₂O₇ (x = 0.4–2.0) ceramics were fabricated by solid-state reactive sintering using commercially available La₂O₃, Gd₂O₃ and ZrO₂ nanopowders as the raw materials. The phase composition, microstructure evolution, densification and optical transmittance of the resulting ceramics were investigated. XRD and Raman results reveal that both the powders and ceramics are in single-phase pyrochlore structure. With the promotion of Gd content, the disorder degree of pyrochlore structure increases gradually while the cell parameters decrease. The x = 1.0, 1.2 and 1.6 samples exhibit high optical transmittance in the 450 nm-6.0 μm range, and the La_0.4Gd_1.6Zr₂O₇ sample shows the highest transmittance of 83.84%. The transparent La_2-xGd_xZr₂O₇ ceramics with high optical quality are available as scintillator matrice and high temperature window material.     

Sand corrosion,thermal expansion,and ablation of medium- and high-entropy compositionally complex fluorite oxides

Sand corrosion, thermal expansion, and ablation properties of a new class of medium- and high-entropy compositionally complex fluorite oxides (CCFOs) are examined as potential protective coating materials. Five binary oxides were mixed and sintered into dense, single-phase CCFOs of the general formula: [Hf_(1-2x)/3Zr_(1-2x)/3Ce_(1-2x)/3Y_xYb_x]O_2-δ (x = 0.2, 0.074, and 0.029). These CCFOs exhibit decreased molten sand infiltration and interaction at intermediate temperatures (1200-1300°C) in comparison with a cubic yttria-stabilized zirconia (YSZ) reference; however, at higher temperatures, the trend is reversed due to the increased chemical reactivity. The equimolar high-entropy (Hf_0.2Zr_0.2Ce_0.2Y_0.2Yb_0.2)O_2-δ exhibits no grain boundary penetration by molten sand at all examined temperatures (1200°C-1500°C), although reaction and precipitation are significant. Moreover, these CCFOs exhibit higher intrinsic thermal expansion coefficients (CTE) than the YSZ reference, thereby being more compatible with Ni-based superalloys. The 8YSZ-like (Hf_0.284Zr_0.284Ce_0.284Y_0.074Yb_0.074)O_2-δ exhibits the highest CTE in this series of CCFOs due to oxygen clustering effects. Finally, these CCFOs also exhibit lower emissivities and form unique faceted microstructures in ablative environments.     

Polyaminocarboxylate promoted synthesis of Hafnium/ Zirconium substituted anion excess In2O3: Structure,optical and electrical conductivity properties

The current study aimed to generate Hf/Zr substituted In₂O₃ with the ultimate aim of realizing a potential transparent conducting oxide. We applied a co-complexation method to bring the reactively dissimilar In and Hf/Zr together in one oxide network. We prepared an EDTA complex containing an equimolar concentration of In and Hf/Zr and examined their characteristics with FTIR and TG-DSC traces. Rietveld refinement results of calcined complexes and their Raman spectra confirmed the formation of anion excess bixbyite structure for (In_1-xM_x)₂O_3+δ (M = Hf, Zr, and x = 0.50). The lattice expanded after substituting with Hf/Zr, and the optical bandgap increased from 2.87 eV (In₂O₃) to 3.20–3.60 eV. The high percentage reflectance in the visible region and absorbance in the UV region fulfilled some of the prerequisites of transparent conducting oxide. Electrical resistivity reduced up to two orders in magnitude with increasing temperature for Hf and Zr incorporated In₂O₃.     

On the ionic conductivity of some zirconia-derived high-entropy oxides

The reported High Entropy Oxides (HEOs) up to now exhibit lower ionic conductivity values than those of classical SOFC electrolytes. Multi-cations oxides, stabilized with the fluorite-type structure are investigated here in order to examine whether the high entropy is relevant to enhance the anionic conductivity of such HEOs, or not. The two synthesis routes that are used do not show significant impact on material properties. Based on configurational entropy (≥ 1.5 k_B/f.u. for HEOs) and ionic radius difference calculations, new compositions are designed and prepared: i) the (Hf_1/3Ce_1/3Zr_1/3)_1-x(Gd_1/2Y_1/2)_xO_2-x/2 series in which the x ratio is increased so as to promote a high vacancy concentration, ii) the (Hf_xCe_yZr_1-x-y)_0.85Yb_0.15O_1.93 series based on the critical radius concept. The ionic conductivity of these HEOs is slightly improved compared to previously reported data but does not exceed 4 × 10^?4 S.cm^?1 at 600 °C. Possible causes of such a low ionic conductivity value are discussed.     

The dehydrogenation of ethylbenzene with CO2 over CexZr1 − xO2 solid solutions

With the purpose of changing the lattice structure of CeO₂ and improving the transmission capacity of lattice oxygen, Ce_xZr_1 − xO₂ solid solutions with different Zr proportions were synthesized using a hydrothermal method and applied in oxidative dehydrogenation of ethylbenzene to styrene with CO₂ at 550 °C. The Ce_0.5Zr_0.5O₂ showed the highest activity with an ethylbenzene conversion of 55% and styrene selectivity above 86%. Analytical characterization showed that the lattice oxygen mobile capacity of Ce_xZr_1 − xO₂ solid solutions was enhanced, corresponding to the order as Ce_0.3Zr_0.7O₂ > Ce_0.5Zr_0.5O₂ > Ce_0.7Zr_0.3O₂ > CeO₂. The oxygen storage/release capacity, higher surface area and pore distribution of Ce–Zr mixed oxides play important roles in the activity of ethylbenzene dehydrogenation to styrene with CO₂.     

Densification,microstructure, and mechanical properties of V-substituted HfB2-based ceramics

This study firstly developed Hf_1-xV_xB₂ (x = 0, 0.01, 0.02, 0.05) powders, which were derived from borothermal reduction of HfO₂ and V₂O₅ with boron. The results revealed that significantly refined Hf_1-xV_xB₂ powders (0.51 μm) could be obtained by solid solution of VB₂, and x ≥ 0.05 was a premise. However, as the content of V-substitution for Hf increased, Hf_1-xV_xB₂ ceramics sintered by spark plasma sintering at 2000 °C only displayed a slight densification improvement, which was attributed to the grain coarsening effect induced by the solid solution of VB₂. By incorporating 20 vol% SiC, fully dense Hf_1-xV_xB₂-SiC ceramics were successfully fabricated using the same sintering parameters. Compared with HfB₂-SiC ceramics, Hf_0.95V_0.05B₂-20 vol% SiC ceramics exhibited an elevated and comparable value of Vickers hardness (23.64 GPa), but lower fracture toughness (4.09 MPa m^1/2).     

Study on La2(Hf1-xTix)2O7 (x ≤ 0.20) pyrochlores for potential thermal/environmental barrier coating applications

Lanthanum hafnate (La₂Hf₂O₇) with a pyrochlore structure has excellent high temperature stability and low thermal conductivity, which is promising for thermal/environmental barrier coatings (T/EBCs) applications. To reduce its thermal expansion coefficient (TEC) so as to better match SiC_f/SiC composites, a smaller tetravalent dopant Ti⁴⁺ has been introduced in the Hf-sites to form La₂(Hf_1-xTi_x)₂O₇ (x ≤ 0.20). The phase composition and microstructure confirms that La₂(Hf_1-xTi_x)₂O₇ solid solutions possess a pure pyrochlore structure. With an increase of x, their TECs are decreasing consistently, whilst their thermal conductivities of La₂(Hf_1-xTi_x)₂O₇ are slightly increasing at high temperature but still much lower than those of meta-stable yttria partially stabilized zirconia, both of which are attributing to an increase of elastic modulus after Ti⁴⁺ doping on Hf-sites. The extremely excellent high temperature stability, relatively low thermal conductivities and low TECs suggest that La₂(Hf_1-xTi_x)₂O₇ is a prospective candidate material for T/EBC applications.