A magnetic polypeptide nanocomposite with pH and near-infrared dual responsiveness for cancer therapy

A magnetic polypeptide nanocomposite with pH and near-infrared (NIR) dual responsiveness was developed as a drug carrier for cancer therapy, which was prepared through the self-assembly of Fe₃O₄ superparamagnetic nanoparticles, poly(aspartic acid) derivative (mPEG-g-PDAEAIM) and doxorubicin (DOX) in water. Fe₃O₄ nanoparticles were prepared to provide the superparamagnetic core of nanocomposites for tumor targeting via chemical co-precipitation. The protonable imidazole groups of mPEG-g-PDAEAIM with a pKa of ~7 were accountable for the pH-responsiveness of nanocomposites. The photothermal effect of nanocomposites under the irradiation of NIR laser was induced via the interactions between dopamine groups of mPEG-g-PDAEAIM and Fe₃O₄ superparamagnetic nanoparticles to trigger the drug release. NMR, FT-IR, TEM, hysteresis loop analysis and MRI were utilized to characterize the materials. The DOX loaded nanocomposites exhibited pH-responsive and NIR dependent on/off switchable release profiles. The nanocomposites without drug loading (Fe₃O₄@mPEG-g-PDAEAIM) showed excellent biocompatibility while DOX loaded nanocomposites caused MCF-7 cells’ apoptosis due to the photothermal/chemotherapy combination effects. Overall, the pH and near-infrared dual responsive magnetic nanocomposite had a great potential for cancer therapy.     

Synthesis of hollow maghemite (-Fe2O3) particles for magnetic field and pH-responsive drug delivery and lung cancer treatment

The development of smart stimuli-responsive materials for drug delivery offers new opportunities for precise drug release and cancer chemotherapy. A combination of more than one stimuli is highly desirable to further maximize the therapy by taking the advantages of various unique merits. Herein, we employed polyethylene glycol (PEG) functionalized γ-Fe₂O₃ particles (γ-Fe₂O₃/PEG) as a novel magnetic drug carrier for doxorubicin (DOX) delivery. The results showed that the γ-Fe₂O₃/PEG exhibited excellent thermal effects under alternating magnetic field (AMF), high magneto-thermal stability, and large DOX loading capacity. Furthermore, the effects of pH and AMF on the DOX drug release were studied. It was discovered that DOX loaded γ-Fe₂O₃/PEG carriers were highly responsive to both AMF and pH, resulting in significantly improved cancer cell killing capability over a single stimulus. The magnetic and pH responsive drug delivery system provided a new opportunity to minimize the side effects and maximize the therapeutic efficiency of lung cancer treatment.     

Ag/αFe2O3-rGO novel ternary nanocomposites: Synthesis,characterization, and photocatalytic activity

In this research, novel ternary Ag/αFe₂O₃-rGO nanocomposites with various contents of GO were synthesized via a facile one-pot hydrothermal method. Ag/αFe₂O₃-rGO nanocomposites were characterized by X-ray diffraction (XRD), Raman spectroscopy, field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectrometer (EDX), photoluminescence (PL) spectroscopy, and Fourier transform infrared (FTIR). The results showed that hematite nanoparticles and Ag nanoparticles were well decorated on the graphene surface. Photocatalytic activity of Ag/αFe₂O₃-rGO ternary nanocomposites and pure Ag/αFe₂O₃ was investigated for photodegradation of Congo red dye solution as a model pollutant under UV light irradiation. The ternary nanocomposite with 1.8?mg/ml GO aqueous solution concentration shows higher degradation efficiency under UV light irradiation than the pure Ag/αFe₂O₃ and the nanocomposites with other GO aqueous solution concentrations. It was observed that the adsorption of the dyes on the nanocomposites surface is dependent on the graphene content due to a decrease in the recombination rate, particles size, and increase charge carrier transfer. The results show that the Ag/αFe₂O₃-rGO nanocomposite can be used as an excellent photocatalytic material for degradation of Congo red dye in wastewater. A possible photocatalytic mechanism was proposed for degradation of Congo red dye.     

Fe3O4 nanoparticle-coated boron nitride nanospheres: Synthesis,magnetic property and biocompatibility study

Hybrid nanocomposites consisting of uniform Fe₃O₄ nanoparticles and boron nitride (BN) nanospheres were synthesized via an ethanol-thermal reaction method. The spherical BN nanoparticles (BNNSs) with average diameter 150 nm have been uniformly coated with dense ultra-small Fe₃O₄ nanoparticles (with average diameter of 10 nm), forming novel Fe₃O₄@BNNS nanocomposites. Magnetic measurement by using vibrating sample magnetometer (VSM) indicates that the Fe₃O₄ coating is superparamagnetic, and the nanocomposites can be physically manipulated at a low magnetic field. Preliminary biocompatibility study has also been performed to evaluate the toxicity of the nanocomposites. The nanocomposites show cytocompatibility at low concentration and have little effect on cell viability of MCF-7, MCF-10 and Hela cell lines. The Fe₃O₄@BNNS nanocomposites may find a wide range of potential applications including water treatment, catalysts, carriers for boron neutron capture therapy and magnetic-targeted drug delivery.     

Magnetic resonance imaging of glioma with novel APTS-coated superparamagnetic iron oxide nanoparticles

We report in vitro and in vivo magnetic resonance (MR) imaging of C6 glioma cells with a novel acetylated 3-aminopropyltrimethoxysilane (APTS)-coated iron oxide nanoparticles (Fe₃O₄ NPs). In the present study, APTS-coated Fe₃O₄ NPs were formed via a one-step hydrothermal approach and then chemically modified with acetic anhydride to generate surface charge-neutralized NPs. Prussian blue staining and transmission electron microscopy (TEM) data showed that acetylated APTS-coated Fe₃O₄ NPs can be taken up by cells. Combined morphological observation, cell viability, and flow cytometric analysis of the cell cycle indicated that the acetylated APTS-coated Fe₃O₄ NPs did not significantly affect cell morphology, viability, or cell cycle, indicating their good biocompatibility. Finally, the acetylated APTS-coated Fe₃O₄ nanoparticles were used in magnetic resonance imaging of C6 glioma. Our results showed that the developed acetylated APTS-coated Fe₃O₄ NPs can be used as an effective labeling agent to detect C6 glioma cells in vitro and in vivo for MR imaging. The results from the present study indicate that the developed acetylated APTS-coated Fe₃O₄ NPs have a potential application in MR imaging.     

TPE‐conjugated biomimetic and biodegradable polymeric micelle for AIE active cell imaging and cancer therapy

Smart nanocarrier for simultaneous drug delivery and cellular imaging is ideal for both cancer therapy and diagnosis. In this work, polymeric micelles based on the tetraphenylethene (TPE) conjugated poly(N6‐carbobenzyloxy‐l ‐lysine)‐block‐poly(2‐methacryloyloxyethyl phosphorylcholine) (TPE‐PLys‐b‐PMPC) copolymer are successfully prepared. Such biomimetic and biodegradable TPE‐PLys‐b‐PMPC micelles exhibit remarkable aggregation‐induced emission (AIE) feature and great biocompatibility, showing great potential for bioimaging application. In addition, anticancer drug doxorubicin (DOX) can be incorporated into the core of micelles and the intracellular release of DOX can be furthermore traced through the fluorescent imaging of these AIE micelles. As expected, this DOX‐loading polymeric micelle shows significant growth inhibition against HeLa cells and 4T1 cells and such TPE‐PLys‐b‐PMPC micelles would be a promising drug carrier for potential cancer therapy and bioimaging. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45651.     

Facile preparation of poly(ε-caprolactone)/Fe3O4@graphene oxide superparamagnetic nanocomposites

The main goal in this work was to prepare and characterize a kind of novel superparamagnetic poly(ε-caprolactone)/Fe₃O₄@graphene oxide (PCL/Fe₃O₄@GO) nanocomposites via facile in situ polymerization. Fabrication procedure included two steps: (1) GO nanosheets were decorated with Fe₃O₄ nanoparticles by an inverse co-precipitation method, which resulted in the production of the magnetite/GO hybrid nanoparticles (Fe₃O₄@GO); (2) incorporation of Fe₃O₄@GO into PCL matrix through in situ polymerization afforded the magnetic nanocomposites (PCL/Fe₃O₄@GO). The microstructure, morphology, crystallization properties, thermal stability and magnetization properties of nanocomposites were investigated with various techniques in detail. Results of wide-angle X-ray diffraction showed that the incorporation of the Fe₃O₄@GO nanoparticles did not affect the crystal structure of PCL. Images of field emission scanning electron microscope and transmission electron microscopy showed Fe₃O₄@GO nanoparticles evenly spread over PCL/Fe₃O₄@GO nanocomposites. Differential scanning calorimeter and polar optical microscopy showed that the crystallization temperature increased and the spherulites size decreased by the presence of Fe₃O₄@GO nanoparticles in the nanocomposites due to the heterogeneous nucleation effect. Thermogravimetric analysis indicated that the addition of Fe₃O₄@GO nanoparticles reduced the thermal stability of PCL in the nanocomposites. The superparamagnetic behavior of the PCL/Fe₃O₄@GO nanocomposites was testified by the superconducting quantum interference device magnetometer analysis. The obtained superparamagnetic nanocomposites present potential applications in tissue engineering and targeted drug delivery.     

Synthesis and Characterization of Novel Heat Resistant,Superparamagnetic Poly(ether-imide) Nanocomposites Containing Xanthene: Representing a Strategy for Improving Thermal Stability of Magnetic Polymer-Based Nanocomposites

Two superparamagnetic and heat resistant xanthene based poly(ether-imide) nanocomposites were successfully synthesized. Field emission scanning electron microscopy, transmission electron microscope, X-ray diffraction, thermal gravimetric analysis, vibrating sample magnetometer, Energy-dispersive X-ray spectroscopy and Fourier-transform infrared (FTIR) techniques were used for studying the morphology, crystalline phase, thermal stability and magnetization properties of the nanocomposites. The neat form of the corresponding poly(ether-imide) was also prepared by thermal imidization method and its structure was confirmed by FTIR, proton nuclear magnetic resonance (¹H NMR), UV–Vis and photoluminescence (PL) spectroscopies. In order to investigate the effects of modifying the surface of Fe₃O₄ nanoparticles on thermal properties of the nanocomposites, the surface of Fe₃O₄ nanoparticles was coated with SiO₂ and polysuccinimide (PSI), sequentially. Then, both the unmodified Fe₃O₄ and surface-modified Fe₃O₄ (Fe₃O₄@SiO₂–PSI) nanoparticles were used as fillers for the polymer matrix. According to the results, the prepared nanocomposites were superparamagnetic and showed higher thermal stability in comparison to the neat poly(ether-imide). Furthermore, poly(ether-imide)/Fe₃O₄@SiO₂–PSI (PIEN 10b) nanocomposite showed higher thermal stability and dispersed better in the polymer matrix [in comparison to poly(ether-imide)/Fe₃O₄ (PIEN 10 a)] due to the presence of imide groups and high hydroxyl content of the functional Fe₃O₄ nanoparticles which caused high interactions between poly(ether-imide) and functional Fe₃O₄. Furthermore, the presence of methyl, ether and bulky xanthene groups in the poly(ether-imide(backbone improved the solubility of the neat polymer in organic solvents. These properties can be very helpful for extending new applications of poly(ether-imide)s.     

Chitosan-based intelligent theragnosis nanocomposites enable pH-sensitive drug release with MR-guided imaging for cancer therapy

Smart drug delivery systems that are triggered by environmental conditions have been developed to enhance cancer therapeutic efficacy while limiting unwanted effects. Because cancer exhibits abnormally high local acidities compared to normal tissues (pH 7.4) due to Warburg effects, pH-sensitive systems have been researched for effective cancer therapy. Chitosan-based intelligent theragnosis nanocomposites, N-naphthyl-O-dimethymaleoyl chitosan-based drug-loaded magnetic nanoparticles (NChitosan-DMNPs), were developed in this study. NChitosan-DMNPs are capable of pH-sensitive drug release with MR-guided images because doxorubicin (DOX) and magnetic nanocrystals (MNCs) are encapsulated into the designed N-naphthyl-O-dimethymaleoyl chitosan (N-nap-O-MalCS). This system exhibits rapid DOX release as acidity increases, high stability under high pH conditions, and sufficient capacity for diagnosing and monitoring therapeutic responses. These results demonstrate that NChitosan-DMNPs have potential as theragnosis nanocomposites for effective cancer therapy.     

Construction of magnetic-targeted and NIR irradiation-controlled drug delivery platform with Fe3O4@Au@SiO2 nanospheres

Near-infrared (NIR) light has great potential in biomedical applications due to its advantages of deep penetration depth and low photodamage to biological tissues. In this paper, we constructed a novel core-shell structured drug nanocarrier, Fe₃O₄@Au@SiO₂, for the controlled delivery of etoposide (VP16), a chemotherapeutic drug for cancer patients. The novel core-shell structured drug delivery platform is composed of a mesoporous silica shell and a magnetic Fe₃O₄ core using Au nanoparticles (AuNPs) as the interlayer, which is characterized by atomic force microscopy (AFM), X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, N₂ adsorption/desorption isotherms and the magnetic measurements with vibrating-sample magnetometer (VSM). The synergistic effects of AuNPs, mesoporous silica and Fe₃O₄ make the core-shell structured nanocomposites an excellent candidate for targeted and NIR light irradiation-controlled drug delivery. For the proposed nanocarrier of VP16, the mesopores in silica can enhance the encapsulation capacity of the nanocarrier and the AuNPs can effectively convert the NIR light into heat to speed up the drug deliver; meanwhile, the incorporation of Fe₃O₄ with high magnetization to the drug delivery platform realize drug targeting under an applied external magnetic field.     

Dielectric and dye adsorption properties of luminescent-superparamagnetic MFe2O4 (M = Mn,Mg)/reduced graphene oxide composites

MFe₂O₄ (M = Mn, Mg)/reduced graphene oxide (MFe₂O₄/RGO) nanocomposites were synthesized through a simple and novel pressure cooker assisted solvothermal method. The nanocomposites were characterized using x-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), UV–Vis absorption and photoluminescence spectroscopy, transmission electron microscopy (TEM) and x-ray photoelectron spectroscopy (XPS). The optical analyses showed that, the MFe₂O₄/RGO materials have good photoluminescence (PL) with excitation dependent PL properties while magnetic characterization indicated that, the as-synthesized MFe₂O₄/RGO nanocomposites exhibits superparamagnetic behavior. Dielectric spectroscopy analysis showed enhanced dielectric constant, dielectric loss and AC conductivity for MFe₂O₄/RGO, compared to graphite oxide (GO). The study on methyl blue (MB) dye adsorption revealed that, the as-prepared nanocomposites have strong and recyclable adsorption for MB.     

ZnFe2O4@Polypyrrole nanocomposites as an efficient broadband electromagnetic wave absorber at 2–40 GHz

In this work, polypyrrole-coated ZnFe₂O₄ (ZnFe₂O₄@PPy) nanocomposites were successfully synthesized via a simple in-situ polymerization process, then evaluated as electromagnetic wave (EMW) absorbers over the 2–40 GHz frequency range. The ZnFe₂O₄@PPy nanocomposites exhibited excellent EMW absorption properties, including very low reflection losses (−42.31 dB at 30.24 GHz and a thickness of 2.5 mm) and a broad absorption bandwidth of 28.20 GHz (from 9.66 to 37.86 GHz). The EMW absorption properties of the ZnFe₂O₄@PPy nanocomposites could be adjusted by changing the PPy shell thickness and also the thickness of the absorber (1–2.5 mm). The excellent microwave absorption performance of the ZnFe₂O₄@PPy nanocomposites is attributable to the synergistic effects of magnetic losses (ZnFe₂O₄ nanoparticles), dielectric losses (ZnFe₂O₄ and PPy) and interfacial relaxation losses at ZnFe₂O₄-PPy interfaces.     

Thermal and mechanical properties of epoxy resin reinforced with modified iron oxide nanoparticles

Epoxy polymers, having good mechanical properties and thermal stability, are often used for engineering applications. Their properties can be further enhanced by the addition of iron oxide (Fe₃O₄) nanoparticles (NPs) as fillers to the resin. In this study, pristine Fe₃O₄ NPs were functionalized with polydopamine (PDA), (3-glycidoxypropyl)trimethoxysilane (GPTMS), and (3-aminopropyl)trimethoxysilane (APTES). X-ray diffraction and scanning electron microscopy (SEM) were used to study any changes in the crystal structure and size of the NPs while Fourier-Transform Infrared Spectroscopy (FTIR) and Thermogravimetric Analysis (TGA) were used to ensure the presence of functional groups on the surface. The mechanical properties of the Fe₃O₄-based nanocomposites generally improved except when reinforced with Fe₃O₄/PDA. The maximum improvement in tensile strength (∼34%) and fracture toughness (∼13%) were observed for pristine Fe₃O₄-based nanocomposites. Dynamic mechanical analysis (DMA) showed that the use of any of the treated NPs improved the material's initial storage modulus and had a substantial impact on its dissipation potential. Also, it was observed that the glass transition temperature measurements by DMA and differential scanning calorimetry were below that of pure epoxy. SEM of the cracked surfaces shows that the incorporation of any NPs leads to an enhancement in its thermal and mechanical properties.     

Fe3O4 encapsulated mesoporous silica nanospheres with tunable size and large void pore

Magnetic Fe₃O₄ and mesoporous silica core-shell nanospheres with tunable size from 110–800 nm were synthesized via a one step self-assembly method. The morphological, structural, textural, and magnetic properties were well-characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, N₂ adsorption-desorption and magnetometer. These nanocomposites, which possess high surface area, large pore volume and well-defined pore size, exhibit two dimensional hexagonal (P6mm) mesostructures. Interestingly, magnetic core and mesoporous silica shell nanocomposites with large void pore (20 nm) on the shell were generated by increasing the ratio of ethanol/water. Additionally, the obtained nanocomposites combined magnetization response and large void pore, implying the possibility of applications in drug/gene targeting delivery. The cell internalization capacity of NH₂-functionalized nanocomposites in the case of cancer cells (HeLa cells) was exemplified to demonstrate their nano-medicine application.     

Adsorption behaviors and mechanisms of porous hypercrosslinked polymers with adjustable functional groups toward doxycycline hydrochloride from water

Imino hypercrosslinked polymers (NH-HCPs), amino hypercrosslinked polymers (NH₂-HCPs), and carboxyl hypercrosslinked polymers (COOH-HCPs) were synthesized through cross-linking and Friedel-Crafts reactions to serve as highly efficient adsorbents for doxycycline hydrochloride (DOX) in water. These polymers, NH-HCPs, NH₂-HCPs, and COOH-HCPs, exhibited specific surface areas measuring 450, 267.576, and 94.39 m²/g, respectively. The adsorption kinetics of DOX onto these polymers were consistent with the pseudo-second-order model, while the adsorption isotherms followed the Langmuir model (NH-HCPs) and Freundlich model (NH₂-HCPs and COOH-HCPs), respectively. The maximum DOX adsorption capacities for NH-HCPs, NH₂-HCPs, and COOH-HCPs were 166.82, 132.43, and 72.07 mg/g, respectively. Simulation results indicated that COOH-HCPs exhibited the strongest adsorption capability due to a substantial presence of oxygen and nitrogen groups on its surface, enabling the formation of hydrogen bonds with DOX. However, its actual adsorption capacity was the lowest among the polymers, indicating that structural adjustments played a more significant role in improving adsorption performance compared to functional adjustments. Adsorption experiments conducted with NH-HCPs and NH₂-HCPs further supported this hypothesis. The primary DOX adsorption mechanism of NH-HCPs, NH₂-HCPs, and COOH-HCPs involved the H-bonding of oxygen and nitrogen functional groups, along with other mechanisms such as π-π conjugated effects, pore-filling effects, electrostatic interactions, and acid–base interactions. Overall, this study demonstrates the effectiveness of NH-HCPs, NH₂-HCPs, and COOH-HCPs in DOX removal from water, highlighting the significant influence of structural adjustments on adsorption performance.     

Preparation,structural, and electrical studies of polyaniline/ZnFe2O4 nanocomposites

Polyaniline/ZnFe₂O₄ nanocomposites were synthesized by a simple and inexpensive one‐step in situ polymerization method in the presence of ZnFe₂O₄ nanoparticles. The structural, morphological, and electrical properties of the samples were characterized by wide angle X‐ray diffraction (WAXD), Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). WAXD and SEM revealed the formation of polyaniline/ZnFe₂O₄ nanocomposites. Infrared spectroscopy indicated that there was some interaction between the ZnFe₂O₄ nanoparticles and polyaniline. The dc electrical conductivity measurements were carried in the temperature range of 80 to 300 K. With increase in the doping concentration of ZnFe₂O₄, the conductivity of the nanocomposites found to be decreasing from 5.15 to 0.92 Scm⁻¹ and the temperature dependent resistivity follows ln ρ(T) ∼ T^−1/2 behavior. The nanocomposites (80 wt % of ZnFe₂O₄) show a more negative magnetoresistance compared with that of pure polyaniline (PANI). These results suggest that the interaction between the polymer matrix PANI and zinc nanoparticles take place in these nanocomposites. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Sonochemical synthesis of CoFe2O4 nanoparticles and their application in magnetic polystyrene nanocomposites

CoFe₂O₄ (CoFe) nanoparticles were synthesized via a facile surfactant-free sonochemical reaction. For preparation of magnetic polymeric films, CoFe₂O₄ nanoparticles were added to polystyrene (PS). Nanoparticles were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Magnetic properties of the samples were investigated using an alternating gradient force magnetometer (AGFM). CoFe₂O₄ nanoparticles exhibit a ferromagnetic behaviour with a saturation magnetization of 62 emu/g and a coercivity of 640 Oe at room temperature. By preparing magnetic films the coercivity is increased. The coercivity of PS/CoFe₂O₄ (10%) nanocomposites is higher than that obtained for PS/CoFe₂O₄ (30%).     

Soft chemistry routes for the preparation of Ag-CoFe2O4 nanocomposites

Silver-cobalt ferrite nanocomposites (Ag-CoFe₂O₄) were synthesized through wet ferritization process and self-propagating combustion method. The structure, morphology, surface chemistry and magnetic properties of the nanocomposites were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR) and vibrating sample magnetometer (VSM). X-ray diffraction patterns confirmed the formation of CoFe₂O₄ and Ag nanoparticles with cubic symmetry. The average crystallite size of CoFe₂O₄ by wet ferritization ranged between 60 Å and 87 Å; for those obtained by self-propagating combustion was in the range 232–290 Å. SEM micrographs revealed different morphological features of nanocomposites. Ag-CoFe₂O₄ obtained by wet ferritization exhibited typical superparamagnetic behaviour. The antimicrobial and anti-biofilm properties of all silver-cobalt ferrites were evaluated. The results revealed that the Ag-CoFe₂O₄ nanocomposites exhibited good microbicidal and anti-biofilm features.     

Envisioning the composition effect on structural,magnetic, thermal and optical properties of mesoporous MgFe2O4-GO nanocomposites

The effect of variation in composition on the structural, magnetic, optical and photo catalytic activity of magnesium ferrite (MgFe₂O₄) -graphene oxide (GO) nanocomposites was studied. Magnetic nanocomposites of GO and MgFe₂O₄ nanoparticles (NPs) with varying w/w ratio were synthesized by facile sonication method. X-Ray diffraction patterns confirmed the presence of spinel ferrite phase in the nanocomposites with the crystalline size 8–32 nm. Fourier transformation infrared (FT-IR) spectra of the nanocomposites displayed absorption bands corresponding to GO and MgFe₂O₄ NPs along with red shift of bands corresponding to C=O, C=C and O-H stretching. Thermo gravimetric analysis confirmed higher stability of nanocomposites over pristine GO. Saturation magnetization increased from 3.63 to 11.10 emu/g with the increase in content of MgFe₂O₄ NPs in the nanocomposites. Scanning electron microscopy analysis along with energy dispersive spectroscopy (SEM-EDX) confirmed the presence of MgFe₂O₄ NPs along with GO sheets. Immobilization of clusters of MgFe₂O₄ NPs onto GO sheets was evident from transmission electron micrographs (TEM) of all the nanocomposites. BET surface area of the nanocomposites ranged from 63.04 to 165.29 m²/g and was maximum when GO:MgFe₂O₄ w/w ratio was 1:0.5. It was markedly higher than pristine GO and MgFe₂O₄ NPs. Optical studies revealed lowering of the band gap in the nanocomposites upto 2.21 eV as compared to pristine MgFe₂O₄ NPs. Photoluminescence (PL) spectra of nanocomposites displayed quenching of PL intensity with increase of GO content. Band gap also displayed similar trend. The synthesized nanocomposites were used as photocatalysts for methylene blue dye degradation under visible light irradiation. The nanocomposite with GO to MgFe₂O₄ ratio 1:0.5 displayed best activity with complete degradation of dye in 30 min. The results confirmed that the composition of GO based magnetic nanocomposites can be tailored for efficient removal of contaminants.     

Characterization,conductivity studies,dielectric properties,and gas sensing performance of in situ polymerized polyindole/copper alumina nanocomposites

Conducting polymer composites of polyindole (PIN) and copper–alumina (Cu–Al₂O₃) nanocomposites were synthesized by in situ polymerization of indole with different contents of Cu–Al₂O₃ nanoparticles. The polymer nanocomposites were characterized by Fourier transform infrared (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), transmission electron microscope (TEM), differential scanning calorimetry, thermogravimetric analysis, and ammonia gas sensing performance was also analyzed. FTIR and XRD studies revealed the attachment of Cu–Al₂O₃ in the molecular chain of PIN. The presence of bright trapezoid channels and variation in morphology for different loading of nanoparticles were confirmed by SEM and TEM. The attachment of Cu–Al₂O₃ nanoparticles in the PIN matrix was confirmed through EDX spectroscopy. The glass transition temperature and thermal stability of the composites were greatly enhanced with the loading of Cu–Al₂O₃. Enhancement in alternating current conductivity, dielectric constant and the current–voltage characteristics of the prepared composite revealed the semiconducting nature of the system with an increase in the loading of nanoparticles. Also, nanocomposite exhibited an excellent sensitivity and fast response to ammonia gas. The evaluated result of the present study suggested that Cu–Al₂O₃ reinforced PIN hybrid is a good candidate for the fabrication of electrochemical devices.