Effect of vertical stress rest period on deformation behaviour of unbound granular materials: Experimental and numerical investigations

Repeated load triaxial test is used to assess the deformation behaviour of unbound granular materials (UGMs) in flexible road pavements. Repeated load pulse characteristics (i.e. shape, loading period and rest period) are the stress configurations used in the experimental set-up to simulate the passing axle loads. Some researchers and standard testing protocols suggest a rest period of varying durations after a loading phase. A thorough review of existing literature and practises has revealed that there is no agreement about the effect of the rest period of vertical stress pulse on the deformation behaviour of the UGMs. Therefore, the main objective of this study is to investigate the effect of repeated stress rest period on the deformation behaviour of UGMs experimentally. Experiments are conducted, both with and without rest period, using basalt and granite crushed rocks from Victoria, Australia. Furthermore, in order to gain insight into the effect of the rest period, finite element modelling is also developed. Both the experimental and modelling results show that the rest period has a noticeable effect on both resilient and permanent deformation behaviours of UGMs. It is, therefore, recommended to take extra precautions while adopting a particular standard testing protocol and to supplement the results by additional tests with different loading configurations.     

Evaluation of empirical estimation of uniaxial compressive strength of rock using measurements from index and physical tests

The uniaxial compressive strength(UCS) of rock is an important parameter required for design and analysis of rock structures,and rock mass classification.Uniaxial compression test is the direct method to obtain the UCS values.However,these tests are generally tedious,time-consuming,expensive,and sometimes impossible to perform due to difficult rock conditions.Therefore,several empirical equations have been developed to estimate the UCS from results of index and physical tests of rock.Nevertheless,numerous empirical models available in the literature often make it difficult for mining engineers to decide which empirical equation provides the most reliable estimate of UCS.This study evaluates estimation of UCS of rocks from several empirical equations.The study uses data of point load strength(Is(50)),Schmidt rebound hardness(SRH),block punch index(BPI),effective porosity(n) and density(ρ)as inputs to empirically estimate the UCS.The estimated UCS values from empirical equations are compared with experimentally obtained or measured UCS values,using statistical analyses.It shows that the reliability of UCS estimated from empirical equations depends on the quality of data used to develop the equations,type of input data used in the equations,and the quality of input data from index or physical tests.The results show that the point load strength(Is(50)) is the most reliable index for estimating UCS among the five types of tests evaluated.Because of type-specific nature of rock,restricting the use of empirical equations to the similar rock types for which they are developed is one of the measures to ensure satisfactory prediction performance of empirical equations.