Preparation and characterization of organic-inorganic poly(ethylene glycol)/WS2 nanocomposite

Layered nanocomposite PEG/WS₂, intercalating oligomeric poly(ethylene glycol) (PEG6000) into the tungsten disulfide host galleries, was synthesized using the exfoliation-adsorption technique. X-ray diffraction revealed that the intercalated oligomer within the host galleries is in a double-layer arrangement with an interlayer expansion of about 8.8 Å. The optimum conditions were explored to prepare the single-phase product with a composition of Li_0.12(PEG)_1.51WS₂. Thermal analyses suggested that the resulting material shows good thermal stability, with the decomposition of the interacted oligomeric chains within the disulfide galleries occurring at around 258 °C. Despite high conductivity of the host material, those of the PEG/WS₂ nanocomposite were found to be high in the order of 1 × 10⁻² S cm⁻¹ at ambient temperature, resulted from the host guest-host charge transfers.     

Fabrication, structural and electrical characterization of VO2 nanowires

The structural and electrical properties of VO₂ nanowires synthesized on Si₃N₄/Si substrates or molybdenum grids by a catalyst-free vapour transport method were investigated. The grown VO₂ nanowires are single crystalline and rectangular-shaped with a preferential axial growth direction of [1 0 0], as examined with various structural analyses such as transmission electron microscopy, electron diffraction, X-ray diffraction, and X-ray photoelectron spectroscopy. In particular, it was found that growing VO₂ nanowires directly on Si₃N₄ deposited molybdenum transmission electron microscopy grids is advantageous for direct transmission electron microscopy and electron diffraction characterizations, because it does not involve a nanowire-detachment step from the substrates that may cause chemical residue contamination. In addition to structural analyses, VO₂ nanowires were also fabricated into field effect transistor devices to characterize their electrical properties. The transistor characteristics and metal-insulator transition effects of VO₂ nanowires were investigated.     

Microwave synthesis and electrochemical characterization of mesoporous carbon@Bi2O3 composites

An efficient and quick microwave method has been employed to prepare worm-like mesoporous carbon@Bi₂O₃ composites for the first time. As-prepared products have been characterized by X-ray diffraction, N₂ adsorption-desorption, scanning electron microscopy, transmission electron microscopy and inductive coupled plasma atomic emission spectroscopy. The electrochemical measurement shows the worm-like mesoporous carbon@Bi₂O₃ composites exhibits excellent capacitance performance and the maximum specific capacitance reaches 386 F g⁻¹, three times more than the pure worm-like mesoporous carbon.     

Hydrothermal synthesis of nanocrystalline VO2 from poly(diallyldimethylammonium) chloride and V2O5

Novel vanadium dioxide nanorods were fabricated from V₂O₅ in the presence of a reducing agent, the poly(diallyldimethylammonium chloride) (PDDA) via a hydrothermal method at 180 °C for 48 h. The samples produced were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), infrared spectroscopy (FTIR), nitrogen adsorption (BET) and thermogravimetry (TG/DTG). The nanorods obtained are approximately 50 nm wide and from 300 to 500 nm long and presents high surface area (42 m² g⁻¹). The nanocrystalline B phase VO₂ is not produced by hydrothermal treatment in the absence of the PDDA polyelectrolyte.     

Low-temperature performance of Al4B2O9 nanowires

In this paper we report on the synthetic investigation of single-crystalline aluminum borate (Al₄B₂O₉) nanowires in large scale by a direct calcination of a precursor powder made of Na₂B₄O₇·10H₂O and Al (NO₃)₃·9H₂O at a low temperature of 850 °C. The nanowires, with the diameter of 20-40 nm and the length up to several micrometers, possess smooth surfaces and uniform sizes along the entire wire. The growth mechanism of the nanowires is attributed to a solid-liquid-solid process, which controls the nanowire morphology.     

New palladium phosphate complexes: K2PdP2O7 and K3.5Pd2.25(P2O7)2 synthesis, single crystal structure and conductivity

Two new diphosphate complexes containing potassium and palladium, K₂PdP₂O₇ and K_3.5Pd_2.25(P₂O₇)₂, have been synthesized and characterized by single crystal X-ray diffraction. K₂PdP₂O₇ exists with layers formed of linked PdP₂O₇ polyhedra, between which are found the potassium ions. K_3.5Pd_2.25(P₂O₇)₂ with a Pd/P₂O₇ ratio of 1.125:1 crystallizes with tunnels of various sizes in which are found the potassium ions. Conductivity measurements reveal the material to be conducting.     

Preparation and crystal structure of a new bismuth vanadate, Bi3.33(VO4)2O2

Single crystals of a new bismuth vanadate, Bi_3.33(VO₄)₂O₂ was prepared by hydrothermal reaction using a hydrated sodium bismuthate, NaBiO₃·nH₂O as one of the starting compounds. The crystal structure was determined by using single crystal X-ray diffraction data. This compound crystallizes in the triclinic space group (#2) with a = 7.114(1), b = 7.844(2), c = 9.372(2) Å, α = 106.090(7), β = 94.468(7) and γ = 112.506(8)°, Z = 2 and the final R factors are R1 = 0.052 and wR2 = 0.14 for 2085 unique reflections. The crystal structure is composed by four bismuth atoms with the coordination number of 6 or 8 and two VO₄ tetrahedra, and one of four bismuth atoms is statistically distributed in the splitting sites with the distance of 0.83 Å. This compound exhibited photocatalytic behavior for decomposition of phenol under visible light irradiation and its activity was less than that of monoclinic BiVO₄.     

Structural and impedance properties of KBa2V5O15 ceramics

The polycrystalline sample of KBa₂V₅O₁₅ ceramics was prepared by a mixed oxide method at low temperature (i.e., at 560 °C). The formation of the compound was confirmed using an X-ray diffraction technique at room temperature. Scanning electron micrograph of the material showed uniform grain distribution on the surface of the sample. Detailed studies of dielectric properties of the compound as a function of temperature at different frequencies suggest that the compound has a dielectric anomaly of ferroelectric to paraelectric type at 323 °C, and exhibits diffuse phase transition. Electrical properties of the material were analyzed using a complex impedance technique. The Nyquists plot showed the presence of both grain (>10³ Hz) and the grain boundary (<10³ Hz) effects in the material. Studies of electrical conductivity over a wide temperature range suggest that the compound exhibits the negative temperature coefficient of resistance behavior. The ac conductivity spectrum was found to obey Jonscher's universal power law.     

Preparation and characterization of CeO2 highly dispersed on activated carbon

A new material constituted by cerium dioxide highly dispersed on activated carbon (CeO₂/AC) was prepared by an impregnation method using cerium(III) nitrate as CeO₂ precursor. In order to evaluate the degree of ceria dispersion on the carbon support, CeO₂/AC was characterized by a number of techniques: thermogravimetry coupled with a mass spectrometer (TG-MS), N₂ adsorption at 77 K, temperature-programmed desorption (TPD), temperature-programmed reduction (TPR) and transmission electron microscopy (TEM). The analysis of the decomposition process under inert atmosphere indicated that cerium nitrate decomposes at 440-460 K, with the evolution of NO. Furthermore, this process produces an additional oxidation of the carbon surface (with evolution of N₂O) and the subsequent onset of new oxygen surface groups, detected by means of temperature-programmed desorption. The ceria deposition process takes place with a decrease in the N₂ adsorption capacity of the starting carbon support, and the analysis of the pore size distribution showed that the majority of ceria particles are situated at the most internal part of the carbon porosity. The temperature-programmed reduction profile of CeO₂/AC was very different to that shown by unsupported CeO₂, with only one continuous reduction process at low temperatures (800-900 K). Finally, TEM pictures gave direct evidence that ceria is highly dispersed on the carbon surface, with a narrow CeO₂ particle distribution centred around 3 nm.     

Structural and electrical properties of Na2Pb2Eu2W2Ti4X4O30 (X = Nb, Ta) ferroelectric ceramics

A new group of tungsten bronze family Na₂Pb₂Eu₂W₂Ti₄X₄O₃₀ (X = Nb, Ta) having all the valence elements (I-VI) were prepared by a high-temperature solid-state reaction technique. The formations of the compounds were confirmed by X-ray diffraction technique with an orthorhombic structure. Surface morphology of the compounds was studied by scanning electron microscope (SEM). Studies of dielectric properties (?_r and tan δ) of the above compounds at different frequencies in a wide temperature range (300-700 K) with an impedance analyzer exhibit a ferroelectric phase transition at 580 and 394 K for Na₂Pb₂Eu₂W₂Ti₄Nb₄O₃₀ and Na₂Pb₂Eu₂W₂Ti₄Ta₄O₃₀, respectively. Ferroelectric properties of these compounds were confirmed with polarization (hysteresis) study.     

Control of growth orientation and shape for epitaxially grown In2O3 nanowires on a-plane sapphire

Vertically aligned indium oxide nanowires were grown on a-plane sapphire substrate by the method of catalyst-assisted carbothermal reduction. The morphology and crystal structure of the nanowires are determined by X-ray diffraction, transmission electron microscopy and field-emission scanning electron microscopy. Two types of In₂O₃ nanowires were found by controlling the growth conditions. The nanowires with a hexagonal cross-section were shown to grow in [1 1 1] direction, whereas those with a square cross-section grow in [0 0 1] direction. In addition to the temperature effects, the concept of supersaturation in Au catalyst is proposed to explain the formation of these two types of nanowires. Besides, tapering, which is explained with the interplay between the vapor-liquid-solid and vapor-solid growth mechanisms, is observed in the nanowires.     

Electronic characterization of alkali ruthenium hollandites: KRu4O8, RbRu4O8 and Cs0.8Li0.2Ru4O8

Transport, specific heat, and magnetic measurements have been performed on three alkali hollandites: KRu₄O₈, RbRu₄O₈, and a newly synthesized Cs analog, Cs_0.8Li_0.2Ru₄O₈, which was determined to have space group I4/m (#87) and lattice parameters, a = 10.0850(4) and c = 3.12180(20). In contrast to the ruthenium perovskites, which display a wide range of electrical and magnetic behavior, the alkali hollandites are simple paramagnetic metals.     

Room temperature synthesis of In2S3 micro- and nanorod textured thin films

Thin films of indium sulfide (In₂S₃) micro- and nanorods were successfully prepared by sulfurization of electrodeposited metal indium layers. The films were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM) and UV-vis spectroscopy. From XRD and TEM observations it was concluded that the In₂S₃ nanorods and microrods have ∼50 nm and ∼0.5 μm diameter, respectively. A plausible top-growth mechanism was proposed for the formation of the nanorods in which the hydroxide layer was found to play an important role. The micro- and nanorods showed optical bandgap of ∼2.2 and ∼2.54 eV, respectively. This facile and cost effective method may be extended to fabricate other metal chalcogenide nanostructures on solid substrates.     

Preparation and characterization of porous ultrafine Fe2O3 particles

Porous ultrafine Fe₂O₃ particles were prepared by homogeneous precipitation method. Fe³⁺ and urea were chosen as starting materials and anionic surfactant as the template. It is shown that the reaction results in the precipitation of a gelatinous hydrous iron oxide/surfactant mixture, which gives ultrafine Fe₂O₃ particles after drying and calcinations. The products were characterized by XRD, TEM, TG/DTA and BET. Conventional XRD patterns show that the products are mixture of γ-Fe₂O₃ and α-Fe₂O₃ phase after being sintered at 350 °C, and γ-Fe₂O₃ transforms entirely to α-Fe₂O₃ when sintered at 650 °C. The low-angle XRD patterns indicate that the mesostructure can only exist between 350 and 400 °C. TEM results show that the Fe₂O₃ particles have diameters of about 30 nm and lengths ranging from 100 to 120 nm; in each particle, there are several vermiculate-like mesopores with diameter of about 20-25 nm. The BET surface areas in excess of 50 m²/g are obtained after calcinations at 350 °C. The BJH desorption average pore width is around 22 nm, which is in agreement with the TEM results. The results show that anionic surfactant and sintering temperature are important to obtain this special morphology.     

Fabrication and characterization of mesoporous TiO2/polypyrrole-based nanocomposite for electrorheological fluid

Mesoporous TiO₂/polypyrrole (PPy)-based nanocomposite for electrorheological fluid was synthesized through one-pot method. By exploiting the combination conductivity of PPy and high dielectric constant of TiO₂, the ER fluid exhibited an enhanced effect. The shear stress was 3.3 times as high as that of mesoporous TiO₂. Powder X-ray diffraction (XRD), TEM and Fourier transform infrared (FT-IR) spectroscopy were employed to characterize the as-made samples. Using a modified rotational viscometer, the electrorheological effect was measured. Dielectric spectra were also given to explain the mechanism.     

Enhanced luminescence by charge compensation in red-emitting Eu-activated Ca3Sr3(VO4)4

The effects of charge compensation on the luminescence behavior of a red-emitting phosphor, Ca₃Sr₃(VO₄)₄:Eu³⁺, were investigated. It has been observed that charge compensated by monovalent ions, especially Na⁺, shows greatly enhanced red emission under ultraviolet excitation. It is found that Na₂CO₃ addition acts as a fluxing agent and plays a role in charge compensation, which clearly improves the emission intensity of Eu³⁺-activated Ca₃Sr₃(VO₄)₄. Enhanced emission intensity of the corresponding charge compensated phosphors under ultraviolet radiation may find application in the production of red phosphors for white light-emitting diodes.     

Synthesis by an ionic liquid-assisted method and optical properties of nanoflower Y2O3

Flower-like Y₂O₃ nano-/microstructured phosphors without metal activators have successfully been fabricated by an ionic liquid (IL)-assisted method involving temperature (600 °C) annealing. In this paper, the effect of IL concentration on the morphology of the product has been investigated. The IL plays a crucial role in the formation of various morphologies of Y₂O₃. The structural and morphological features of the obtained samples have been characterized by means of X-ray powder diffraction (XRD) analysis, photoluminescence spectra (PL), Fourier-transform infrared (FT-IR) spectra and X-ray photoelectron spectra (XPS). The photoluminescence spectra of the products exhibit an intense bluish-white emission (ranging from 405 to 430 nm and centered at 418 nm). The luminescent mechanisms have been ascribed to the carbon impurities in the Y₂O₃ host. The effect of the ILs cation and the counter anions on the Y₂O₃ morphology of these nanostructures was studied experimentally. It was observed that Y₂O₃ morphology and PL of these nanostructures were strongly influenced by the type of cation and anion. As the length of the subsidiary chain of cation section of IL (imidaziole ione) reduces, the thickness of the nano-sheets increases. It is expected that the present method may easily be extended to similar nano-/microstructures of other oxide materials. Such investigations are currently underway.     

Preparation, magnetic and microwave absorption properties of La0.5Sr0.5MnO3/La(OH)3 composites

La_0.5Sr_0.5MnO₃/La(OH)₃ composites with different weight ratio of La_0.5Sr_0.5MnO₃ particles and La(OH)₃ nanowires have been prepared by tuning the reaction time under hydrothermal conditions. The structure, morphology and magnetic properties have been investigated. Additionally, by the measurements of the complex permittivity, permeability and microwave absorption properties in the frequency range of 1-12 GHz, the results shown that the weight ratio of La(OH)₃ nanowires has great influence on reflection loss. Excellent absorption property can be obtained when the ratio is 1.4%, which is attributed to the enhanced electromagnetic match as well as the proper dielectric loss and magnetic loss. The enhanced electromagnetic match is originated from the improved frequency dispersion of the complex permittivity and permeability due to the presence of dielectric La(OH)₃ nanowires.     

High temperature thermopower and electrical resistivity studies in the transparent conducting oxide Sn doped MgIn2O4

Sn doping in an n-type transparent conducting oxide MgIn₂O₄ is carried out and its effect on the high temperature transport properties viz. thermopower and electrical resistivity is studied. A solid solution exists in the composition window Mg_1+xIn_2−2xSn_xO₄ for 0 < x ≤ 0.4. The band gap as well as the transport properties increases with increasing Sn concentration. The high temperature resistivity properties indicate degenerate semiconducting behavior for all the compositions. The highest figure of merit obtained is 0.12 × 10⁻⁴ K⁻¹ for the parent compound at 600 K.     

Rapid preparation and characterization of Dy2Zr2O7 nanocrystals

Ultrafine fluorite type Dy₂Zr₂O₇ nanocrystals with cubic structure were fabricated at relatively low temperature by stearic acid method (SAM) using zirconium(IV) butoxide and dysprosium nitrate as raw materials, stearic acid as solvent and dispersant. The fabrication process was monitored by thermogravimetric analysis and differential thermal analysis (TG-DTA) and Fourier transform infrared spectroscopy (FT-IR). The obtained products were characterized by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), energy dispersive X-ray spectrometer (EDS) and UV-vis absorption spectroscopy. A single phase of Dy₂Zr₂O₇ with high crystallinity was formed at 800 °C. The interplanar distances measured from the HRTEM image were 0.284 and 0.256 nm, respectively, coinciding with the theoretical values.